name: XKB_U261-24XN-4BS60
descripton: USB-C plug, 24 pins, edge mount
datasheet: https://datasheet.lcsc.com/szlcsc/2001050503_XKB-Enterprise-U261-24XN-4BS60_C319150.pdf
keywords: connector, USB
# LCSC C319150 https://lcsc.com/product-detail/USB-Connectors_XKB-Enterprise-U261-24XN-4BS60_C319150.html
# since QEDA does not allow to put pads on both side, this footprint is one for one side

pinout:
  TX+: 2
  TX-: 3
  CC: 5
  D+: 6
  D-: 7
  SBU: 8
  RX-: 10
  RX+: 11  
  GND: 1, 12
  VBUS: 4, 9
  SHIELD: 25, 26

properties:
  power: VBUS
  ground: GND
  bidir: D-, D+, CC, SBU
  in: RX-, RX+
  out: TX-, TX+
  passive: SHIELD

schematic:
  symbol: connector
  left: TX+, TX-, CC, D+, D-, SBU, RX-, RX+
  top: VBUS
  bottom: GND, SHIELD

housing:
  pattern: custom
  bodyWidth: 8.22-8.28
  bodyLength: 11.95-12.45
  bodyPosition: 0, 5.45 # use signal pad center (12.20 / 2 - 1.70 + 1.20 - 0.90 + 1.50 / 2)
  height: 3.60
  # board in connector
  silkscreen: M -3.95 -4.4 -3.05 -4.4 M 3.95 -4.4 3.05 -4.4 M -3.05 -4.4 -3.05 -3.5 M 3.05 -4.4 3.05 -3.5 M -3.05 -3.5 3.05 -3.5

  # signals
  padWidth: 0.30
  padHeight: 1.50
  pitch: 0.50
  rowCount: 1
  columnCount: 12
  rowDX: 0
  rowDY: 0

  # shield
  padWidth1: 0.70
  padHeight1: 1.40
  pitch1: 7.20
  rowCount1: 1
  columnCount1: 2
  rowDX1: 0
  rowDY1: -0.05