diff --git a/connector/usb-c_xkb_u262-24xn-4bv64.yaml b/connector/usb-c_xkb_u262-24xn-4bv64.yaml
new file mode 100644
index 0000000..f3cbbec
--- /dev/null
+++ b/connector/usb-c_xkb_u262-24xn-4bv64.yaml
@@ -0,0 +1,97 @@
+name: XKB_U262-24XN-4BV64
+description: connector, USB-C, receptacle, 24-pin, SMT+TABS
+datasheet: http://www.helloxkb.com/public/images/pdf/U262-24XN-4BV64.pdf
+distributor: LCSC C388660
+alternative: SOFNG MC-312D-C C183607 http://www.sofng.com/uploads/soft/200827/2-200RG61935.pdf
+
+pinout:
+  A:
+    TX1+: A2
+    TX1-: A3
+    CC1: A5
+    D+: A6
+    D-: A7
+    SBU1: A8
+    RX2-: A10
+    RX2+: A11
+  B:
+    RX1+: B11
+    RX1-: B10
+    SBU2: B8
+    D-: B7
+    D+: B6
+    CC2: B5
+    TX2-: B3
+    TX2+: B2
+  GND: A1, A12, B1, B12
+  VBUS: A4, A9, B4, B9
+  SHIELD: S1, S2, S3, S4
+
+properties:
+  power: VBUS
+  ground: GND
+  bidir: D-, D+, CC1, CC2, SBU1, SBU2
+  in: RX1-, RX1+, RX2-, RX2+
+  out: TX1-, TX1+, TX2-, TX2+
+  passive: SHIELD
+
+schematic:
+  symbol: connector
+  left: A
+  right: B
+  top: VBUS
+  bottom: GND, SHIELD
+
+housing:
+  pattern: custom
+  bodyWidth: 8.94
+  bodyLength: 7.90
+  bodyPosition: 0, -1.25 # use tab as center (2.70 - 7.90 / 2)
+  height: 3.16
+
+  # A
+  numbers: A1-12
+  padWidth: 0.30
+  padHeight: 0.95
+  pitch: 0.50
+  rowCount: 1
+  columnCount: 12
+  rowDX: 0.12 # 5.5*0.5 - 2.63
+  rowDY: -5.175 # 3.40 + 2.25 - 0.95/2
+
+  # B
+  numbers1: B1-12
+  padWidth1: 0.30
+  padHeight1: 0.95
+  pitch1: -0.50
+  rowCount1: 1
+  columnCount1: 12
+  rowDX1: -0.13 # 5.5*0.5 - 2.88
+  rowDY1: -3.875 # 3.40 + 0.95/2
+
+  # shield edge
+  numbers2: S3, S4
+  slotWidth2: 0.6
+  slotHeight2: 1.9
+  padWidth2: 1.0
+  padHeight2: 2.3
+  padPosition2: -4.32, 0, 4.32, 0 # 8.64/2
+
+  # shield pins
+  numbers3: S1, S2
+  slotWidth3: 0.6
+  slotHeight3: 1.6
+  padWidth3: 1.0
+  padHeight3: 2.0
+  padPosition3: -4.32, -4.55, 4.32, -4.55 # 8.64/2
+
+  numbers4: S1, S2
+  slotWidth4: 1.2
+  slotHeight4: 0.6
+  padWidth4: 1.5
+  padHeight4: 1.0
+  padPosition4: -4.02, -4.05, 4.02, -4.05 # 8.64/2 + 0.3 - 1.2/2, -4.55+1.6/2-0.6/2
+
+  # mounting hole
+  holeDiameter5: 0.5
+  padPosition5: -3.4, -3.2, 3.4, -3.2