add USB micro-B 3.0

connector/usb-micro-b-3.0_hro_u-f-10sw-y-1.yaml

@@ -0,0 +1,75 @@
+name: HRO_U-F-10SW-Y-1
+description: USB, micro-C, 3.0, receptacle, SMT
+datasheet: https://datasheet.lcsc.com/lcsc/2108132030_Korean-Hroparts-Elec-U-F-10SW-Y-1_C2689945.pdf # datasheet not found on krhro.com
+distributor: LCSC C2689945 
+
+pinout:
+  USB:
+    VBUS: 1
+    D-: 2
+    D+: 3
+    ID: 4
+    GND: 5
+  USB3.0:
+    SSTX-: 6
+    SSTX+: 7
+    GND_DRAIN: 8
+    SSRX-: 9
+    SSRX+: 10
+  SHELL: 11-16
+
+properties:
+  power: VBUS
+  ground: GND, GND_DRAIN
+  bidir: D-, D+
+  in: ID, SSRX-, SSRX+
+  out: SSTX-, SSTX+
+  passive: SHELL
+
+schematic:
+  symbol: connector
+  right: USB, USB3.0
+  bottom: SHELL
+
+housing:
+  pattern: custom
+  bodyWidth: 12.85
+  bodyLength: 5.5
+  bodyPosition: 0, 0.1 # use tab center line as center (4.80+0.7)/2-(0.7+2.15)
+  height: 2.45
+  silkscreen: M -6.425 2.05 6.425 2.05 # PCB edge (includes body position)
+
+  # USB 2.0 left pins
+  padWidth: 0.4
+  padHeight: 1.35
+  pitch: 0.65 # 1.30 / 2
+  rowCount: 1
+  columnCount: 5
+  rowDX: -2.675 # 12.25/2-3.45
+  rowDY: -2.70
+
+  # USB 3.0 right pins
+  padWidth1: 0.4
+  padHeight1: 1.35
+  pitch1: 0.65
+  rowCount1: 1
+  columnCount1: 5
+  rowDX1: 4.025 # 12.25/2-3.45-6.7
+  rowDY1: -2.70
+
+  # shell
+  padWidth2: 1.8 # 4.9-3.1
+  padHeight2: 1.9
+  padPosition2: -6.675, -0 # 12.25/2-3.45+3.10+1.8/2
+
+  padWidth3: 1.9 # 2.15-0.25
+  padHeight3: 1.9
+  padPosition3: -3.875, 0, -1.475, 0 # 12.25/2-3.45+3.10+1.8/2 12.25/2-3.45+0.25+1.9/2
+
+  padWidth4: 1.8 # 4.9-3.1
+  padHeight4: 1.9
+  padPosition4: 1.325, 0, 3.825, 0 # 12.25/2-3.45-3.1-1.8/2 12.25/2-3.45-5.6-1.8/2
+
+  padWidth5: 2.3 # 10.25-7.95
+  padHeight5: 1.9
+  padPosition5: 6.425, 0 # 12.25/2-3.45-7.95-2.3/2