/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file stm32h5xx_hal_conf.h * @author MCD Application Team * @brief HAL configuration file. ****************************************************************************** * @attention * * Copyright (c) 2018-2021 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32h5xx_HAL_CONF_H #define STM32h5xx_HAL_CONF_H #ifdef __cplusplus extern "C" { #endif /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CEC_MODULE_ENABLED */ /* #define HAL_COMP_MODULE_ENABLED */ /* #define HAL_CRC_MODULE_ENABLED */ /* #define HAL_CRYP_MODULE_ENABLED */ /* #define HAL_DAC_MODULE_ENABLED */ /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_FDCAN_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_LPTIM_MODULE_ENABLED */ /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_SPI_MODULE_ENABLED */ /* #define HAL_TIM_MODULE_ENABLED */ /* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED #define HAL_EXTI_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED #define HAL_FLASH_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED /* ########################## Register Callbacks selection ############################## */ /** * @brief This is the list of modules where register callback can be used */ #define USE_HAL_ADC_REGISTER_CALLBACKS 0u #define USE_HAL_CEC_REGISTER_CALLBACKS 0u #define USE_HAL_COMP_REGISTER_CALLBACKS 0u #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u #define USE_HAL_DAC_REGISTER_CALLBACKS 0u #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u #define USE_HAL_HCD_REGISTER_CALLBACKS 0u #define USE_HAL_I2C_REGISTER_CALLBACKS 0u #define USE_HAL_I2S_REGISTER_CALLBACKS 0u #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u #define USE_HAL_PCD_REGISTER_CALLBACKS 0u #define USE_HAL_RNG_REGISTER_CALLBACKS 0u #define USE_HAL_RTC_REGISTER_CALLBACKS 0u #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u #define USE_HAL_SPI_REGISTER_CALLBACKS 0u #define USE_HAL_TIM_REGISTER_CALLBACKS 0u #define USE_HAL_UART_REGISTER_CALLBACKS 0u #define USE_HAL_USART_REGISTER_CALLBACKS 0u #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). */ #if !defined (HSE_VALUE) #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ /** * @brief Internal Core Speed oscillator (CSI) default value. * This value is the default CSI range value after Reset. */ #if !defined (CSI_VALUE) #define CSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz*/ #endif /* CSI_VALUE */ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 64000000UL /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. * This internal oscillator is mainly dedicated to provide a high precision clock to * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency * which is subject to manufacturing process variations. */ #if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. The real value my vary depending on manufacturing process variations.*/ #endif /* HSI48_VALUE */ /** * @brief Internal Low Speed oscillator (LSI) value. */ #if !defined (LSI_VALUE) #define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ #if !defined (LSI_STARTUP_TIME) #define LSI_STARTUP_TIME 130UL /*!< Time out for LSI start up, in ms */ #endif /* LSI_STARTUP_TIME */ /** * @brief External Low Speed oscillator (LSE) value. * This value is used by the UART, RTC HAL module to compute the system frequency */ #if !defined (LSE_VALUE) #define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz*/ #endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ /** * @brief External clock source for SPI/SAI peripheral * This value is used by the SPI/SAI HAL module to compute the SPI/SAI clock source * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ #endif /* EXTERNAL_CLOCK_VALUE */ /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ############################################ System Configuration ################################################ */ /** * @brief This is the HAL system configuration section */ #define VDD_VALUE 3300UL /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority (lowest by default) */ #define USE_RTOS 0U #define PREFETCH_ENABLE 0U /*!< Enable prefetch */ /* ################## SPI peripheral configuration ########################## */ /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver * Activated: CRC code is present inside driver * Deactivated: CRC code cleaned from driver */ #define USE_SPI_CRC 0U /* ################## CRYP peripheral configuration ########################## */ #define USE_HAL_CRYP_SUSPEND_RESUME 1U /* ########################## Assert Selection ############################## */ /** * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ /* Includes ------------------------------------------------------------------*/ /** * @brief Include modules header file */ #ifdef HAL_RCC_MODULE_ENABLED #include "stm32h5xx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32h5xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32h5xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32h5xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ #ifdef HAL_ADC_MODULE_ENABLED #include "stm32h5xx_hal_adc.h" #include "stm32h5xx_hal_adc_ex.h" #endif /* HAL_ADC_MODULE_ENABLED */ #ifdef HAL_CEC_MODULE_ENABLED #include "stm32h5xx_hal_cec.h" #endif /* HAL_CEC_MODULE_ENABLED */ #ifdef HAL_COMP_MODULE_ENABLED #include "stm32h5xx_hal_comp.h" #endif /* HAL_COMP_MODULE_ENABLED */ #ifdef HAL_CRC_MODULE_ENABLED #include "stm32h5xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED #include "stm32h5xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DAC_MODULE_ENABLED #include "stm32h5xx_hal_dac.h" #endif /* HAL_DAC_MODULE_ENABLED */ #ifdef HAL_EXTI_MODULE_ENABLED #include "stm32h5xx_hal_exti.h" #endif /* HAL_EXTI_MODULE_ENABLED */ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32h5xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ #ifdef HAL_FDCAN_MODULE_ENABLED #include "stm32h5xx_hal_fdcan.h" #endif /* HAL_FDCAN_MODULE_ENABLED */ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32h5xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ #ifdef HAL_I2C_MODULE_ENABLED #include "stm32h5xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ #ifdef HAL_I2S_MODULE_ENABLED #include "stm32h5xx_hal_i2s.h" #endif /* HAL_I2S_MODULE_ENABLED */ #ifdef HAL_IRDA_MODULE_ENABLED #include "stm32h5xx_hal_irda.h" #endif /* HAL_IRDA_MODULE_ENABLED */ #ifdef HAL_IWDG_MODULE_ENABLED #include "stm32h5xx_hal_iwdg.h" #endif /* HAL_IWDG_MODULE_ENABLED */ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32h5xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ #ifdef HAL_PCD_MODULE_ENABLED #include "stm32h5xx_hal_pcd.h" #endif /* HAL_PCD_MODULE_ENABLED */ #ifdef HAL_PWR_MODULE_ENABLED #include "stm32h5xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ #ifdef HAL_RNG_MODULE_ENABLED #include "stm32h5xx_hal_rng.h" #endif /* HAL_RNG_MODULE_ENABLED */ #ifdef HAL_RTC_MODULE_ENABLED #include "stm32h5xx_hal_rtc.h" #endif /* HAL_RTC_MODULE_ENABLED */ #ifdef HAL_SMARTCARD_MODULE_ENABLED #include "stm32h5xx_hal_smartcard.h" #endif /* HAL_SMARTCARD_MODULE_ENABLED */ #ifdef HAL_SMBUS_MODULE_ENABLED #include "stm32h5xx_hal_smbus.h" #endif /* HAL_SMBUS_MODULE_ENABLED */ #ifdef HAL_SPI_MODULE_ENABLED #include "stm32h5xx_hal_spi.h" #endif /* HAL_SPI_MODULE_ENABLED */ #ifdef HAL_TIM_MODULE_ENABLED #include "stm32h5xx_hal_tim.h" #endif /* HAL_TIM_MODULE_ENABLED */ #ifdef HAL_UART_MODULE_ENABLED #include "stm32h5xx_hal_uart.h" #endif /* HAL_UART_MODULE_ENABLED */ #ifdef HAL_USART_MODULE_ENABLED #include "stm32h5xx_hal_usart.h" #endif /* HAL_USART_MODULE_ENABLED */ #ifdef HAL_WWDG_MODULE_ENABLED #include "stm32h5xx_hal_wwdg.h" #endif /* HAL_WWDG_MODULE_ENABLED */ /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for functions parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) /* Exported functions ------------------------------------------------------- */ void assert_failed(uint8_t *file, uint32_t line); #else #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ #ifdef __cplusplus } #endif #endif /* STM32h5xx_HAL_CONF_H */