diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c
index 3076192af..e67e381ce 100644
--- a/examples/device/cdc_msc/src/msc_disk.c
+++ b/examples/device/cdc_msc/src/msc_disk.c
@@ -243,11 +243,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
 
   switch (scsi_cmd[0])
   {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c
index b9205f0c2..a895f4738 100644
--- a/examples/device/cdc_msc_freertos/src/msc_disk.c
+++ b/examples/device/cdc_msc_freertos/src/msc_disk.c
@@ -221,11 +221,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
 
   switch (scsi_cmd[0])
   {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c
index b9205f0c2..a895f4738 100644
--- a/examples/device/dynamic_configuration/src/msc_disk.c
+++ b/examples/device/dynamic_configuration/src/msc_disk.c
@@ -221,11 +221,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
 
   switch (scsi_cmd[0])
   {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c
index 18d3ca0d7..37446ebc3 100644
--- a/examples/device/msc_dual_lun/src/msc_disk_dual.c
+++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c
@@ -28,6 +28,9 @@
 
 #if CFG_TUD_MSC
 
+// When button is pressed, LUN1 will be set to not ready to simulate
+// medium not present (e.g SD card removed)
+
 // Some MCU doesn't have enough 8KB SRAM to store the whole disk
 // We will use Flash as read-only disk with board that has
 // CFG_EXAMPLE_MSC_READONLY defined
@@ -227,7 +230,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16
 // return true allowing host to read/write this LUN e.g SD card inserted
 bool tud_msc_test_unit_ready_cb(uint8_t lun)
 {
-  (void) lun;
+  if ( lun == 1 && board_button_read() ) return false;
 
   return true; // RAM disk is always ready
 }
@@ -320,23 +323,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
 
   switch (scsi_cmd[0])
   {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
-    case SCSI_CMD_START_STOP_UNIT:
-      // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power
-      /* scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd;
-        // Start bit = 0 : low power mode, if load_eject = 1 : unmount disk storage as well
-        // Start bit = 1 : Ready mode, if load_eject = 1 : mount disk storage
-        start_stop->start;
-        start_stop->load_eject;
-       */
-       resplen = 0;
-    break;
-
-
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c
index 8f4fc9356..70ce1d352 100644
--- a/src/class/msc/msc_device.c
+++ b/src/class/msc/msc_device.c
@@ -209,7 +209,7 @@ TU_ATTR_UNUSED static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] =
   { .key = SCSI_CMD_MODE_SELECT_6                , .data = "Mode_Select 6" },
   { .key = SCSI_CMD_MODE_SENSE_6                 , .data = "Mode_Sense 6" },
   { .key = SCSI_CMD_START_STOP_UNIT              , .data = "Start Stop Unit" },
-  { .key = SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL , .data = "Prevent Allow Medium Removal" },
+  { .key = SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL , .data = "Prevent/Allow Medium Removal" },
   { .key = SCSI_CMD_READ_CAPACITY_10             , .data = "Read Capacity10" },
   { .key = SCSI_CMD_REQUEST_SENSE                , .data = "Request Sense" },
   { .key = SCSI_CMD_READ_FORMAT_CAPACITY         , .data = "Read Format Capacity" },