diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 7e42a66f8..08149e201 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -32,7 +32,7 @@ jobs: # Alphabetical order # Note: bundle multiple families into a matrix since there is only one self-hosted instance can # run IAR build. Too many matrix can hurt due to setup/teardown overhead. - - 'stm32f0 stm32f1 stm32f7 stm32h7 stm32l4' + - 'stm32f0 stm32f1 stm32f7 stm32l4' steps: - name: Clean workspace run: | @@ -58,7 +58,7 @@ jobs: # Alphabetical order # Note: bundle multiple families into a matrix since there is only one self-hosted instance can # run IAR build. Too many matrix can hurt due to setup/teardown overhead. - - 'stm32g0 stm32g4' + - 'stm32g0 stm32g4 stm32h7' steps: - name: Clean workspace run: | diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index c3a69e7c5..d0bb5be17 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -4,13 +4,12 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m7 +include $(TOP)/tools/make/cpu/$(CPU_CORE).mk + CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -D__ARMVFP__=0 \ + -D__ARMFPV5__=0 \ -DXIP_EXTERNAL_FLASH=1 \ -DXIP_BOOT_HEADER_ENABLE=1 \ -DCFG_TUSB_MCU=OPT_MCU_MIMXRT1XXX @@ -58,9 +57,6 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 - # UF2 generation, iMXRT need to strip to text only before conversion APPLICATION_ADDR = 0x6000C000 $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).elf diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6881385a8 --- /dev/null +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "stm32h7xx.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >DTCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >DTCMRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >DTCMRAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake new file mode 100644 index 000000000..46744df49 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake @@ -0,0 +1,19 @@ +set(MCU_VARIANT stm32h745xx) +set(JLINK_DEVICE stm32h745xi_m7) + +set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_CM7.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_CM7.icf) + +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32H745xx + HSE_VALUE=25000000 + CORE_CM7 + # default to PORT 0 + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + ) +endfunction() diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld deleted file mode 100644 index 697a1a1df..000000000 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld +++ /dev/null @@ -1,173 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : STM32CubeIDE -** -** Abstract : Linker script for STM32H7 series -** 2048Kbytes FLASH and 192Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** Copyright (c) 2019 STMicroelectronics. -** All rights reserved. -** -** This software component is licensed by ST under BSD 3-Clause license, -** the "License"; You may not use this file except in compliance with the -** License. You may obtain a copy of the License at: -** opensource.org/licenses/BSD-3-Clause -** -**************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x2000 ; /* required amount of heap */ -_Min_Stack_Size = 0x2000 ; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K - RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K - RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K - RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K - ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake new file mode 100644 index 000000000..033d3a9f2 --- /dev/null +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake @@ -0,0 +1,23 @@ +set(MCU_VARIANT stm32h743xx) +set(JLINK_DEVICE stm32h743xi) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32H743xx + HSE_VALUE=8000000 + HAL_TIM_MODULE_ENABLED + # default to PORT 1 High Speed + BOARD_TUD_RHPORT=1 + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + target_sources(${TARGET} PUBLIC + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_tim.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_tim_ex.c + ) +endfunction() diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk index e8202d9fc..9997faff9 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk @@ -11,7 +11,7 @@ SRC_C += \ # GCC GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -GCC_LD_FILE = $(BOARD_PATH)/STM32H743IITX_FLASH.ld +GCC_LD_FILE = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld # IAR IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake new file mode 100644 index 000000000..f04a768a5 --- /dev/null +++ b/hw/bsp/stm32h7/family.cmake @@ -0,0 +1,130 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +set(ST_FAMILY h7) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") + +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + target_compile_options(${BOARD_TARGET} PUBLIC + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET) + family_configure_common(${TARGET}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() + + +function(family_configure_device_example TARGET) + family_configure_example(${TARGET}) +endfunction() + +function(family_configure_host_example TARGET) + family_configure_example(${TARGET}) +endfunction() + +function(family_configure_dual_usb_example TARGET) + family_configure_example(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 8042248a8..c11240207 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -53,13 +53,13 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c INC += \ $(TOP)/$(BOARD_PATH) \ diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/stm32h723xx_flash.ld b/hw/bsp/stm32h7/linker/stm32h723xx_flash.ld similarity index 100% rename from hw/bsp/stm32h7/boards/stm32h723nucleo/stm32h723xx_flash.ld rename to hw/bsp/stm32h7/linker/stm32h723xx_flash.ld diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/hw/bsp/stm32h7/linker/stm32h743xx_flash.ld similarity index 100% rename from hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld rename to hw/bsp/stm32h7/linker/stm32h743xx_flash.ld