From 4fb15f6bb7afb105635db8370917af977d8a918a Mon Sep 17 00:00:00 2001 From: Gabriel Chouinard Date: Tue, 7 Feb 2023 19:31:35 -0500 Subject: [PATCH 01/82] Add stm32u575-nucleo support --- .../stm32u575nucleo/STM32U575ZITXQ_FLASH.ld | 167 ++++++++++++++++++ hw/bsp/stm32u5/boards/stm32u575nucleo/board.h | 111 ++++++++++++ .../stm32u5/boards/stm32u575nucleo/board.mk | 10 ++ 3 files changed, 288 insertions(+) create mode 100644 hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld create mode 100644 hw/bsp/stm32u5/boards/stm32u575nucleo/board.h create mode 100644 hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld b/hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld new file mode 100644 index 000000000..03c022bc2 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld @@ -0,0 +1,167 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U575xI Device from STM32U5 series +** 2048Kbytes FLASH +** 784Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 768K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h new file mode 100644 index 000000000..75e8a0d6a --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +// LED GREEN +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_7 +#define LED_STATE_ON 1 + +// BUTTON +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for STLink VCOM +#define UART_DEV LPUART1 +#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOG +#define UART_GPIO_AF GPIO_AF8_LPUART1 +#define UART_TX_PIN GPIO_PIN_7 +#define UART_RX_PIN GPIO_PIN_8 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ + +static inline void board_clock_init(void) +{ + + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 10; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 2; + RCC_OscInitStruct.PLL.PLLR = 1; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48; + PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48; + + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); +} + + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk new file mode 100644 index 000000000..0c7948860 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk @@ -0,0 +1,10 @@ +CFLAGS += \ + -DSTM32U575xx \ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32U575ZITXQ_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32u575 From c4566c4d2ba5219e6c2ea821912b888d0270ff07 Mon Sep 17 00:00:00 2001 From: Gabriel Chouinard Date: Tue, 5 Sep 2023 21:28:13 -0400 Subject: [PATCH 02/82] Enable instruction cache for stm32u5 boards --- hw/bsp/stm32u5/boards/stm32u575nucleo/board.h | 2 +- hw/bsp/stm32u5/family.c | 3 +++ hw/bsp/stm32u5/family.mk | 1 + 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h index 75e8a0d6a..54a6d4cd7 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -61,7 +61,7 @@ static inline void board_clock_init(void) RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - /* Enable Power Clock*/ + /* Enable Power Clock */ __HAL_RCC_PWR_CLK_ENABLE(); /** Configure the main internal regulator output voltage diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index a30d886aa..c1fe3f412 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -60,6 +60,9 @@ void board_init(void) UART_CLK_EN(); + /* Enable Instruction cache */ + HAL_ICACHE_Enable(); + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 9174fe96a..dace63a51 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -20,6 +20,7 @@ SRC_C += \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ From 9d0251f7a6751a0d998da4fad81a35a043608275 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 19 Sep 2023 15:42:52 +0200 Subject: [PATCH 03/82] Fix UAC interleaved copy. --- src/class/audio/audio_device.c | 113 +++++++++++++++------------------ 1 file changed, 51 insertions(+), 62 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 1a7ce7870..0e4220f4f 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -631,68 +631,59 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t // Decoding according to 2.3.1.5 Audio Streams // Helper function -static inline uint8_t * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesToCopy, void * dst, uint8_t * dst_end, uint8_t * src, uint8_t const n_ff_used) +static inline uint8_t * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesToCopy, uint8_t * dst, uint8_t * dst_end, uint8_t * src, uint8_t const n_ff_used) { - // This function is an optimized version of - // while((uint8_t *)dst < dst_end) - // { - // memcpy(dst, src, nBytesToCopy); - // dst = (uint8_t *)dst + nBytesToCopy; - // src += nBytesToCopy * n_ff_used; - // } - - // Optimize for fast half word copies - typedef struct{ - uint16_t val; - } __attribute((__packed__)) unaligned_uint16_t; - - // Optimize for fast word copies - typedef struct{ - uint32_t val; - } __attribute((__packed__)) unaligned_uint32_t; + // Due to one FIFO contains 2 channels, data always aligned to (nBytesToCopy * 2) switch (nBytesToCopy) { case 1: while((uint8_t *)dst < dst_end) { - *(uint8_t *)dst++ = *src; - src += n_ff_used; + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + src += 2 * (n_ff_used - 1); } break; case 2: while((uint8_t *)dst < dst_end) { - *(unaligned_uint16_t*)dst = *(unaligned_uint16_t*)src; - dst += 2; - src += 2 * n_ff_used; + *(uint32_t*)dst = *(uint32_t*)src; + src += 4; + dst += 4; + src += 4 * (n_ff_used - 1); } break; case 3: while((uint8_t *)dst < dst_end) { - // memcpy(dst, src, 3); - // dst = (uint8_t *)dst + 3; - // src += 3 * n_ff_used; - - // TODO: Is there a faster way to copy 3 bytes? - *(uint8_t *)dst++ = *src++; - *(uint8_t *)dst++ = *src++; - *(uint8_t *)dst++ = *src++; - - src += 3 * (n_ff_used - 1); + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + src += 6 * (n_ff_used - 1); } break; case 4: while((uint8_t *)dst < dst_end) { - *(unaligned_uint32_t*)dst = *(unaligned_uint32_t*)src; + *(uint32_t*)dst++ = *(uint32_t*)src++; + src += 4; dst += 4; - src += 4 * n_ff_used; + *(uint32_t*)dst++ = *(uint32_t*)src++; + src += 4; + dst += 4; + src += 8 * (n_ff_used - 1); } break; } @@ -946,57 +937,55 @@ range [-1, +1) // Helper function static inline uint8_t * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesToCopy, uint8_t * src, uint8_t * src_end, uint8_t * dst, uint8_t const n_ff_used) { - // Optimize for fast half word copies - typedef struct{ - uint16_t val; - } __attribute((__packed__)) unaligned_uint16_t; - - // Optimize for fast word copies - typedef struct{ - uint32_t val; - } __attribute((__packed__)) unaligned_uint32_t; - + // Due to one FIFO contains 2 channels, data always aligned to (nBytesToCopy * 2) switch (nBytesToCopy) { case 1: while(src < src_end) { - *dst = *src++; - dst += n_ff_used; + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + dst += 2 * (n_ff_used - 1); } break; case 2: while(src < src_end) { - *(unaligned_uint16_t*)dst = *(unaligned_uint16_t*)src; - src += 2; - dst += 2 * n_ff_used; + *(uint32_t*)dst = *(uint32_t*)src; + src += 4; + dst += 4; + dst += 4 * (n_ff_used - 1); } break; case 3: while(src < src_end) { - // memcpy(dst, src, 3); - // src = (uint8_t *)src + 3; - // dst += 3 * n_ff_used; - - // TODO: Is there a faster way to copy 3 bytes? - *dst++ = *src++; - *dst++ = *src++; - *dst++ = *src++; - - dst += 3 * (n_ff_used - 1); + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + *(uint16_t*)dst = *(uint16_t*)src; + src += 2; + dst += 2; + dst += 6 * (n_ff_used - 1); } break; case 4: while(src < src_end) { - *(unaligned_uint32_t*)dst = *(unaligned_uint32_t*)src; + *(uint32_t*)dst++ = *(uint32_t*)src++; src += 4; - dst += 4 * n_ff_used; + dst += 4; + *(uint32_t*)dst++ = *(uint32_t*)src++; + src += 4; + dst += 4; + dst += 8 * (n_ff_used - 1); } break; } From 6be7f354c26e09a87d1b856b0e237ff82be5963f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 19 Sep 2023 16:32:49 +0200 Subject: [PATCH 04/82] Fix cast-align. --- src/class/audio/audio_device.c | 194 +++++++++++++++------------------ 1 file changed, 89 insertions(+), 105 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 0e4220f4f..46fd6dfa9 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -631,64 +631,55 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t // Decoding according to 2.3.1.5 Audio Streams // Helper function -static inline uint8_t * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesToCopy, uint8_t * dst, uint8_t * dst_end, uint8_t * src, uint8_t const n_ff_used) +static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesToCopy, void * dst, const void * dst_end, void * src, uint8_t const n_ff_used) { - // Due to one FIFO contains 2 channels, data always aligned to (nBytesToCopy * 2) + uint16_t * dst16 = dst; + uint16_t * src16 = src; + const uint16_t * dst_end16 = dst_end; + uint32_t * dst32 = dst; + uint32_t * src32 = src; + const uint32_t * dst_end32 = dst_end; - switch (nBytesToCopy) + if (nBytesToCopy == 1) { - case 1: - while((uint8_t *)dst < dst_end) - { - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - src += 2 * (n_ff_used - 1); - } - break; - - case 2: - while((uint8_t *)dst < dst_end) - { - *(uint32_t*)dst = *(uint32_t*)src; - src += 4; - dst += 4; - src += 4 * (n_ff_used - 1); - } - break; - - case 3: - while((uint8_t *)dst < dst_end) - { - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - src += 6 * (n_ff_used - 1); - } - break; - - case 4: - while((uint8_t *)dst < dst_end) - { - *(uint32_t*)dst++ = *(uint32_t*)src++; - src += 4; - dst += 4; - *(uint32_t*)dst++ = *(uint32_t*)src++; - src += 4; - dst += 4; - src += 8 * (n_ff_used - 1); - } - break; + while(dst16 < dst_end16) + { + *dst16++ = *src16++; + src16 += n_ff_used - 1; + } + return src16; + } + else if (nBytesToCopy == 2) + { + while(dst32 < dst_end32) + { + *dst32++ = *src32++; + src32 += n_ff_used - 1; + } + return src32; + } + else if (nBytesToCopy == 3) + { + while(dst16 < dst_end16) + { + *dst16++ = *src16++; + *dst16++ = *src16++; + *dst16++ = *src16++; + src16 += 3 * (n_ff_used - 1); + } + return src16; + } + else // nBytesToCopy == 4 + { + while(dst32 < dst_end32) + { + *dst32++ = *src32++; + *dst32++ = *src32++; + src32 += 2 * (n_ff_used - 1); + } + return src32; } - - return src; } static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received) @@ -935,62 +926,55 @@ range [-1, +1) * */ // Helper function -static inline uint8_t * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesToCopy, uint8_t * src, uint8_t * src_end, uint8_t * dst, uint8_t const n_ff_used) +static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesToCopy, void * src, const void * src_end, void * dst, uint8_t const n_ff_used) { // Due to one FIFO contains 2 channels, data always aligned to (nBytesToCopy * 2) - switch (nBytesToCopy) + uint16_t * dst16 = dst; + uint16_t * src16 = src; + const uint16_t * src_end16 = src_end; + uint32_t * dst32 = dst; + uint32_t * src32 = src; + const uint32_t * src_end32 = src_end; + + if (nBytesToCopy == 1) { - case 1: - while(src < src_end) - { - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - dst += 2 * (n_ff_used - 1); - } - break; - - case 2: - while(src < src_end) - { - *(uint32_t*)dst = *(uint32_t*)src; - src += 4; - dst += 4; - dst += 4 * (n_ff_used - 1); - } - break; - - case 3: - while(src < src_end) - { - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - *(uint16_t*)dst = *(uint16_t*)src; - src += 2; - dst += 2; - dst += 6 * (n_ff_used - 1); - } - break; - - case 4: - while(src < src_end) - { - *(uint32_t*)dst++ = *(uint32_t*)src++; - src += 4; - dst += 4; - *(uint32_t*)dst++ = *(uint32_t*)src++; - src += 4; - dst += 4; - dst += 8 * (n_ff_used - 1); - } - break; + while(src16 < src_end16) + { + *dst16++ = *src16++; + dst16 += n_ff_used - 1; + } + return dst16; + } + else if (nBytesToCopy == 2) + { + while(src32 < src_end32) + { + *dst32++ = *src32++; + dst32 += n_ff_used - 1; + } + return dst32; + } + else if (nBytesToCopy == 3) + { + while(src16 < src_end16) + { + *dst16++ = *src16++; + *dst16++ = *src16++; + *dst16++ = *src16++; + dst16 += 3 * (n_ff_used - 1); + } + return dst16; + } + else // nBytesToCopy == 4 + { + while(src32 < src_end32) + { + *dst32++ = *src32++; + *dst32++ = *src32++; + dst32 += 2 * (n_ff_used - 1); + } + return dst32; } - - return dst; } static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audio) From 1168e4e16343cc0a6d958899460f1b841624974f Mon Sep 17 00:00:00 2001 From: bac Date: Tue, 26 Sep 2023 15:27:17 +0100 Subject: [PATCH 05/82] Added support for USB2 HS peripheral (with integrated HS PHY) on STM32U59x chips --- src/portable/synopsys/dwc2/dwc2_stm32.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index cb455bd90..aa77511fa 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -84,7 +84,17 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 #include "stm32u5xx.h" - #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE + // NOTE: STM595/5A5/599/5A9 only have 1 USB port (with integrated HS PHY) + // USB_OTG_FS_BASE and OTG_FS_IRQn not defined + #if (! defined USB_OTG_FS) + #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE + #define EP_MAX_HS 9 + #define EP_FIFO_SIZE_HS 4096 + #define USB_OTG_FS_PERIPH_BASE USB_OTG_HS_BASE + #define OTG_FS_IRQn OTG_HS_IRQn + #else + #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE + #endif #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 From 8b2cb63da88c0f790fee8d514971153569993b05 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 10 Oct 2023 18:22:20 +0200 Subject: [PATCH 06/82] Fix naming nBytesPerSample. --- src/class/audio/audio_device.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 46fd6dfa9..5d3772a9d 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -631,9 +631,9 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t // Decoding according to 2.3.1.5 Audio Streams // Helper function -static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesToCopy, void * dst, const void * dst_end, void * src, uint8_t const n_ff_used) +static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesPerSample, void * dst, const void * dst_end, void * src, uint8_t const n_ff_used) { - // Due to one FIFO contains 2 channels, data always aligned to (nBytesToCopy * 2) + // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) uint16_t * dst16 = dst; uint16_t * src16 = src; const uint16_t * dst_end16 = dst_end; @@ -641,7 +641,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nB uint32_t * src32 = src; const uint32_t * dst_end32 = dst_end; - if (nBytesToCopy == 1) + if (nBytesPerSample == 1) { while(dst16 < dst_end16) { @@ -650,7 +650,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nB } return src16; } - else if (nBytesToCopy == 2) + else if (nBytesPerSample == 2) { while(dst32 < dst_end32) { @@ -659,7 +659,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nB } return src32; } - else if (nBytesToCopy == 3) + else if (nBytesPerSample == 3) { while(dst16 < dst_end16) { @@ -670,7 +670,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nB } return src16; } - else // nBytesToCopy == 4 + else // nBytesPerSample == 4 { while(dst32 < dst_end32) { @@ -926,9 +926,9 @@ range [-1, +1) * */ // Helper function -static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesToCopy, void * src, const void * src_end, void * dst, uint8_t const n_ff_used) +static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesPerSample, void * src, const void * src_end, void * dst, uint8_t const n_ff_used) { - // Due to one FIFO contains 2 channels, data always aligned to (nBytesToCopy * 2) + // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) uint16_t * dst16 = dst; uint16_t * src16 = src; const uint16_t * src_end16 = src_end; @@ -936,7 +936,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nB uint32_t * src32 = src; const uint32_t * src_end32 = src_end; - if (nBytesToCopy == 1) + if (nBytesPerSample == 1) { while(src16 < src_end16) { @@ -945,7 +945,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nB } return dst16; } - else if (nBytesToCopy == 2) + else if (nBytesPerSample == 2) { while(src32 < src_end32) { @@ -954,7 +954,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nB } return dst32; } - else if (nBytesToCopy == 3) + else if (nBytesPerSample == 3) { while(src16 < src_end16) { @@ -965,7 +965,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nB } return dst16; } - else // nBytesToCopy == 4 + else // nBytesPerSample == 4 { while(src32 < src_end32) { From 2ba760a1c16dc096da9f96f20cf2443e3a1d8416 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 10 Oct 2023 18:24:47 +0200 Subject: [PATCH 07/82] Enhance audio_4_channel_mic example, plot 4 different waves for each channel. --- .../device/audio_4_channel_mic/src/main.c | 43 +++++++++++-------- .../audio_4_channel_mic/src/tusb_config.h | 3 +- 2 files changed, 26 insertions(+), 20 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 94ac86d84..3b21b4ac6 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -34,17 +34,16 @@ #include #include #include +#include "arm_math.h" #include "bsp/board_api.h" #include "tusb.h" +#include "tusb_config.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ - -#ifndef AUDIO_SAMPLE_RATE -#define AUDIO_SAMPLE_RATE 48000 -#endif +#define AUDIO_SAMPLE_RATE CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE /* Blink pattern * - 250 ms : device not mounted @@ -70,7 +69,7 @@ uint8_t clkValid; audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state -// Audio test data +// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ/2]; // Ensure half word aligned void led_blinking_task(void); @@ -400,7 +399,8 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u (void) ep_in; (void) cur_alt_setting; - for (uint8_t cnt=0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) + // Write buffer[0] (CH0-1) and buffer[1] (CH1-2) into FIFO + for (uint8_t cnt=0; cnt < 2; cnt++) { tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); } @@ -416,22 +416,27 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin (void) ep_in; (void) cur_alt_setting; - uint16_t dataVal; - // Generate dummy data - for (uint16_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) + uint16_t * p_buff = i2s_dummy_buffer[0]; + uint16_t dataVal = 1; + for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) { - uint16_t * p_buff = i2s_dummy_buffer[cnt]; // 2 bytes per sample - dataVal = 1; - for (uint16_t cnt2 = 0; cnt2 < AUDIO_SAMPLE_RATE/1000; cnt2++) - { - for (uint8_t cnt3 = 0; cnt3 < CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX; cnt3++) - { - *p_buff++ = dataVal; - } - dataVal++; - } + // CH0 saw wave + *p_buff++ = dataVal; + // CH1 inverted saw wave + *p_buff++ = 60 + AUDIO_SAMPLE_RATE/1000 - dataVal; + dataVal++; } + p_buff = i2s_dummy_buffer[1]; + for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) + { + // CH3 square wave + *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 120:170; + // CH4 sinus wave + q15_t t = 0x7FFF * cnt / (AUDIO_SAMPLE_RATE/1000); + *p_buff++ = arm_sin_q15(t) / 1300 + 200; + } + return true; } diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 5cf6d07c3..291ac4f79 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -103,6 +103,7 @@ extern "C" { //-------------------------------------------------------------------- // Have a look into audio_device.h for all configurations +#define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 #define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN @@ -112,7 +113,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN From 20699e30dd7847a7177d91dc76791248a788f3dc Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 10 Oct 2023 18:25:14 +0200 Subject: [PATCH 08/82] Enhance plot script. --- .../device/audio_4_channel_mic/src/plot_audio_samples.py | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py index 8312b4e28..a3a2b2fd4 100644 --- a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -10,7 +10,7 @@ if __name__ == '__main__': # print(sd.query_devices()) fs = 48000 # Sample rate - duration = 100e-3 # Duration of recording + duration = 20e-3 # Duration of recording if platform.system() == 'Windows': # WDM-KS is needed since there are more than one MicNode device APIs (at least in Windows) @@ -25,9 +25,14 @@ if __name__ == '__main__': sd.wait() # Wait until recording is finished print('Done!') + time = np.arange(0, duration, 1 / fs) # time vector + # strip starting zero + myrecording = myrecording[100:] + time = time[100:] plt.plot(time, myrecording) plt.xlabel('Time [s]') plt.ylabel('Amplitude') plt.title('MicNode 4 Channel') + plt.legend(['CH-1', 'CH-2', 'CH-3','CH-4']) plt.show() From 504d29cf7ae9f40a56c73a2e666564b9b4ab9efd Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 10 Oct 2023 18:25:42 +0200 Subject: [PATCH 09/82] Update make & cmake file. --- examples/device/audio_4_channel_mic/CMakeLists.txt | 7 +++++++ examples/device/audio_4_channel_mic/Makefile | 11 ++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index f61e1b640..ae6bf0142 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -23,9 +23,16 @@ target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) +# CMSIS sources +target_sources(${PROJECT} PUBLIC + ${TOP}/lib/CMSIS_5/CMSIS/DSP/Source/CommonTables/arm_common_tables.c + ${TOP}/lib/CMSIS_5/CMSIS/DSP/Source/FastMathFunctions/arm_sin_q15.c + ) + # Example include target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src + ${TOP}/lib/CMSIS_5/CMSIS/DSP/Include ) # Configure compilation flags and libraries for the example without RTOS. diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 2a3d854fb..97e4118c0 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -3,9 +3,18 @@ include ../../make.mk INC += \ src \ $(TOP)/hw \ + $(TOP)/lib/CMSIS_5/CMSIS/DSP/Include \ # Example source -EXAMPLE_SOURCE += $(wildcard src/*.c) +EXAMPLE_SOURCE += \ + src/main.c \ + src/usb_descriptors.c \ + +# CMSIS sources +SRC_C += \ + lib/CMSIS_5/CMSIS/DSP/Source/CommonTables/arm_common_tables.c \ + lib/CMSIS_5/CMSIS/DSP/Source/FastMathFunctions/arm_sin_q15.c \ + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) include ../../rules.mk From e2852da668ae5f8e2398ac0a4c2a93d5f50f2618 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 10 Oct 2023 18:35:24 +0200 Subject: [PATCH 10/82] Update deps. --- tools/get_deps.py | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/get_deps.py b/tools/get_deps.py index 1fac291a3..8eea3e6de 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -166,8 +166,9 @@ deps_optional = { 'ch32v307'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '20285262657d1b482d132d20d755c8c330d55c1f', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' - 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 ' + 'imxrt kinetis_k32l2 kinetis_kl lpc11 lpc13 lpc15 lpc17 lpc18 lpc40' + 'lpc43 lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x rp2040' + 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4' 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', From c8430f5f85d587a996bc0301a47be12cc70cedb7 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 10 Oct 2023 19:08:25 +0200 Subject: [PATCH 11/82] Refactor to get rid of CMSIS DSP lib. --- .../device/audio_4_channel_mic/CMakeLists.txt | 12 ++-- examples/device/audio_4_channel_mic/Makefile | 6 -- examples/device/audio_4_channel_mic/skip.txt | 1 + .../device/audio_4_channel_mic/src/main.c | 55 +++++++++++-------- tools/get_deps.py | 5 +- 5 files changed, 40 insertions(+), 39 deletions(-) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index ae6bf0142..0f5d36193 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -23,18 +23,16 @@ target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) -# CMSIS sources -target_sources(${PROJECT} PUBLIC - ${TOP}/lib/CMSIS_5/CMSIS/DSP/Source/CommonTables/arm_common_tables.c - ${TOP}/lib/CMSIS_5/CMSIS/DSP/Source/FastMathFunctions/arm_sin_q15.c - ) - # Example include target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src - ${TOP}/lib/CMSIS_5/CMSIS/DSP/Include ) +# Add libm for GCC +if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_libraries(${PROJECT} PUBLIC m) +endif() + # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 97e4118c0..8ee6a01ec 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -3,18 +3,12 @@ include ../../make.mk INC += \ src \ $(TOP)/hw \ - $(TOP)/lib/CMSIS_5/CMSIS/DSP/Include \ # Example source EXAMPLE_SOURCE += \ src/main.c \ src/usb_descriptors.c \ -# CMSIS sources -SRC_C += \ - lib/CMSIS_5/CMSIS/DSP/Source/CommonTables/arm_common_tables.c \ - lib/CMSIS_5/CMSIS/DSP/Source/FastMathFunctions/arm_sin_q15.c \ - SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) include ../../rules.mk diff --git a/examples/device/audio_4_channel_mic/skip.txt b/examples/device/audio_4_channel_mic/skip.txt index 1ee86a485..3c42a96d9 100644 --- a/examples/device/audio_4_channel_mic/skip.txt +++ b/examples/device/audio_4_channel_mic/skip.txt @@ -1,3 +1,4 @@ mcu:SAMD11 mcu:SAME5X mcu:SAMG +family:broadcom_64bit diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 3b21b4ac6..4bcbdb692 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -34,7 +34,7 @@ #include #include #include -#include "arm_math.h" +#include #include "bsp/board_api.h" #include "tusb.h" @@ -96,6 +96,27 @@ int main(void) sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE; sampleFreqRng.subrange[0].bRes = 0; + // Generate dummy data + uint16_t * p_buff = i2s_dummy_buffer[0]; + uint16_t dataVal = 1; + for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) + { + // CH0 saw wave + *p_buff++ = dataVal; + // CH1 inverted saw wave + *p_buff++ = 60 + AUDIO_SAMPLE_RATE/1000 - dataVal; + dataVal++; + } + p_buff = i2s_dummy_buffer[1]; + for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) + { + // CH3 square wave + *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 120:170; + // CH4 sinus wave + float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); + *p_buff++ = (uint16_t)(sinf(t) * 25) + 200; + } + while (1) { tud_task(); // tinyusb device task @@ -399,7 +420,16 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u (void) ep_in; (void) cur_alt_setting; - // Write buffer[0] (CH0-1) and buffer[1] (CH1-2) into FIFO + + // In read world application data flow is driven by I2S clock, + // both tud_audio_tx_done_pre_load_cb() & tud_audio_tx_done_post_load_cb() are hardly used. + // For example in your I2S receive callback: + // void I2S_Rx_Callback(int channel, const void* data, uint16_t samples) + // { + // tud_audio_write_support_ff(channel, data, samples * N_BYTES_PER_SAMPLE * N_CHANNEL_PER_FIFO); + // } + + // Write I2S buffer into FIFO for (uint8_t cnt=0; cnt < 2; cnt++) { tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); @@ -416,27 +446,6 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin (void) ep_in; (void) cur_alt_setting; - // Generate dummy data - uint16_t * p_buff = i2s_dummy_buffer[0]; - uint16_t dataVal = 1; - for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) - { - // CH0 saw wave - *p_buff++ = dataVal; - // CH1 inverted saw wave - *p_buff++ = 60 + AUDIO_SAMPLE_RATE/1000 - dataVal; - dataVal++; - } - p_buff = i2s_dummy_buffer[1]; - for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) - { - // CH3 square wave - *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 120:170; - // CH4 sinus wave - q15_t t = 0x7FFF * cnt / (AUDIO_SAMPLE_RATE/1000); - *p_buff++ = arm_sin_q15(t) / 1300 + 200; - } - return true; } diff --git a/tools/get_deps.py b/tools/get_deps.py index 8eea3e6de..1fac291a3 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -166,9 +166,8 @@ deps_optional = { 'ch32v307'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '20285262657d1b482d132d20d755c8c330d55c1f', - 'imxrt kinetis_k32l2 kinetis_kl lpc11 lpc13 lpc15 lpc17 lpc18 lpc40' - 'lpc43 lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x rp2040' - 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4' + 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' + 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 ' 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', From 656e1e416aa9dbd7ba4c18e777f7294a101f0667 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 17 Oct 2023 09:46:01 +0200 Subject: [PATCH 12/82] Add flow control for IN transfer. --- .../device/audio_4_channel_mic/src/main.c | 30 +++- .../src/plot_audio_samples.py | 7 +- .../audio_4_channel_mic/src/tusb_config.h | 15 +- src/class/audio/audio_device.c | 140 ++++++++++++++++-- src/class/audio/audio_device.h | 16 ++ 5 files changed, 187 insertions(+), 21 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 4bcbdb692..52e6d71f7 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -69,8 +69,13 @@ uint8_t clkValid; audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +#if CFG_TUD_AUDIO_ENABLE_ENCODING // Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ/2]; // Ensure half word aligned +#else +// Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 +uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_EP_SZ_IN]; // Ensure half word aligned +#endif void led_blinking_task(void); void audio_task(void); @@ -97,6 +102,7 @@ int main(void) sampleFreqRng.subrange[0].bRes = 0; // Generate dummy data +#if CFG_TUD_AUDIO_ENABLE_ENCODING uint16_t * p_buff = i2s_dummy_buffer[0]; uint16_t dataVal = 1; for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) @@ -116,6 +122,23 @@ int main(void) float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); *p_buff++ = (uint16_t)(sinf(t) * 25) + 200; } +#else + uint16_t * p_buff = i2s_dummy_buffer; + uint16_t dataVal = 1; + for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) + { + // CH0 saw wave + *p_buff++ = dataVal; + // CH1 inverted saw wave + *p_buff++ = 60 + AUDIO_SAMPLE_RATE/1000 - dataVal; + dataVal++; + // CH3 square wave + *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 120:170; + // CH4 sinus wave + float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); + *p_buff++ = (uint16_t)(sinf(t) * 25) + 200; + } +#endif while (1) { @@ -384,6 +407,8 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * { case AUDIO_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); + // Set sample rate for flow control + tud_audio_set_tx_flow_control(sampFreq); return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); case AUDIO_CS_REQ_RANGE: @@ -429,12 +454,15 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u // tud_audio_write_support_ff(channel, data, samples * N_BYTES_PER_SAMPLE * N_CHANNEL_PER_FIFO); // } +#if CFG_TUD_AUDIO_ENABLE_ENCODING // Write I2S buffer into FIFO for (uint8_t cnt=0; cnt < 2; cnt++) { tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); } - +#else + tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); +#endif return true; } diff --git a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py index a3a2b2fd4..d17a908b6 100644 --- a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -10,11 +10,11 @@ if __name__ == '__main__': # print(sd.query_devices()) fs = 48000 # Sample rate - duration = 20e-3 # Duration of recording + duration = 1 # Duration of recording if platform.system() == 'Windows': # WDM-KS is needed since there are more than one MicNode device APIs (at least in Windows) - device = 'Microphone (MicNode_4_Ch), Windows WDM-KS' + device = 'Microphone (MicNode_4_Ch), Windows WASAPI' elif platform.system() == 'Darwin': device = 'MicNode_4_Ch' else: @@ -28,8 +28,7 @@ if __name__ == '__main__': time = np.arange(0, duration, 1 / fs) # time vector # strip starting zero - myrecording = myrecording[100:] - time = time[100:] + plt.plot(time, myrecording) plt.xlabel('Time [s]') plt.ylabel('Amplitude') diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 291ac4f79..d1e19c5a1 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -114,14 +114,25 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +#define CFG_TUD_AUDIO_ENABLE_ENCODING 0 + +#if CFG_TUD_AUDIO_ENABLE_ENCODING + #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 #define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 #define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value #define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) +#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ 4 * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) + +#else + +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX 4 * CFG_TUD_AUDIO_EP_SZ_IN +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ 4 * CFG_TUD_AUDIO_EP_SZ_IN + +#endif #ifdef __cplusplus } diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 5d3772a9d..9299440c9 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -364,14 +364,21 @@ typedef struct #endif #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + uint32_t sample_rate_tx; + uint16_t packet_sz_tx[3]; + uint8_t bclock_id_tx; + uint8_t interval_tx; +#endif + // Encoding parameters - parameters are set when alternate AS interface is set by host -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL) audio_format_type_t format_type_tx; uint8_t n_channels_tx; + uint8_t n_bytes_per_sampe_tx; #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING audio_data_format_type_I_t format_type_I_tx; - uint8_t n_bytes_per_sampe_tx; uint8_t n_channels_per_ff_tx; uint8_t n_ff_used_tx; #endif @@ -444,7 +451,7 @@ static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id); static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id); static uint8_t audiod_get_audio_fct_idx(audiod_function_t * audio); -#if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_ENABLE_DECODING +#if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * p_desc, uint8_t const * p_desc_end, uint8_t const as_itf); static inline uint8_t tu_desc_subtype(void const* desc) @@ -453,6 +460,10 @@ static inline uint8_t tu_desc_subtype(void const* desc) } #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +static bool audiod_tx_calc_packet_size(const uint16_t* norminal_size, uint16_t data_size, uint16_t fifo_size, uint16_t* packet_size); +#endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP static bool set_fb_params_freq(audiod_function_t* audio, uint32_t sample_freq, uint32_t mclk_freq); #endif @@ -821,6 +832,57 @@ uint16_t tud_audio_int_ctr_n_write(uint8_t func_id, uint8_t const* buffer, uint1 #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + +bool tud_audio_n_set_tx_flow_control(uint8_t func_id, uint32_t sample_rate) +{ + TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); + audiod_function_t* audio = &_audiod_fct[func_id]; + + TU_VERIFY(audio->format_type_tx == AUDIO_FORMAT_TYPE_I); + TU_VERIFY(audio->n_channels_tx); + TU_VERIFY(audio->n_bytes_per_sampe_tx); + TU_VERIFY(audio->interval_tx); + + if (sample_rate == 0) + { + audio->packet_sz_tx[0] = 0; + audio->packet_sz_tx[1] = 0; + audio->packet_sz_tx[2] = 0; + return false; + } + + const uint8_t interval = (tud_speed_get() == TUSB_SPEED_FULL) ? audio->interval_tx : 1 << (audio->interval_tx - 1); + + const uint32_t sample_normimal = sample_rate * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); + const uint32_t sample_reminder = sample_rate * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); + + const uint16_t packet_sz_tx_min = (sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + const uint16_t packet_sz_tx_norm = sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + const uint16_t packet_sz_tx_max = (sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + + TU_ASSERT(packet_sz_tx_max <= audio->ep_in_sz); + + // Frmt20.pdf 2.3.1.1 USB Packets + if (sample_reminder) + { + // All virtual frame packets must either contain INT(nav) audio slots (small VFP) or INT(nav)+1 (large VFP) audio slots + audio->packet_sz_tx[0] = packet_sz_tx_norm; + audio->packet_sz_tx[1] = packet_sz_tx_norm; + audio->packet_sz_tx[2] = packet_sz_tx_max; + } else + { + // In the case where nav = INT(nav), ni may vary between INT(nav)-1 (small VFP), INT(nav) + // (medium VFP) and INT(nav)+1 (large VFP). + audio->packet_sz_tx[0] = packet_sz_tx_min; + audio->packet_sz_tx[1] = packet_sz_tx_norm; + audio->packet_sz_tx[2] = packet_sz_tx_max; + } + + return true; +} + +#endif // This function is called once a transmit of an audio packet was successfully completed. Here, we encode samples and place it in IN EP's buffer for next transmission. // If you prefer your own (more efficient) implementation suiting your purpose set CFG_TUD_AUDIO_ENABLE_ENCODING = 0 and use tud_audio_n_write. @@ -886,9 +948,16 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) #else // No support FIFOs, if no linear buffer required schedule transmit, else put data into linear buffer and schedule - +#if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + uint16_t tgt_packet_sz; + // packet_sz_tx is based on total packet size, here we want size for each support buffer. + if (audiod_tx_calc_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, &tgt_packet_sz)) + n_bytes_tx = tgt_packet_sz; + else + n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz); +#else n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz); // Limit up to max packet size, more can not be done for ISO - +#endif #if USE_LINEAR_BUFFER_TX tu_fifo_read_n(&audio->ep_in_ff, audio->lin_buf_in, n_bytes_tx); TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx)); @@ -987,7 +1056,6 @@ static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audi // Determine amount of samples uint8_t const n_ff_used = audio->n_ff_used_tx; - uint16_t const nBytesToCopy = audio->n_channels_per_ff_tx * audio->n_bytes_per_sampe_tx; uint16_t const capPerFF = audio->ep_in_sz / n_ff_used; // Sample capacity per FIFO in bytes uint16_t nBytesPerFFToSend = tu_fifo_count(&audio->tx_supp_ff[0]); uint8_t cnt_ff; @@ -1001,14 +1069,24 @@ static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audi } } - // Check if there is enough +#if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + uint16_t tgt_packet_sz; + // packet_sz_tx is based on total packet size, here we want size for each support buffer. + if (audiod_tx_calc_packet_size(audio->packet_sz_tx, nBytesPerFFToSend * n_ff_used, audio->tx_supp_ff[0].depth * n_ff_used, &tgt_packet_sz)) + nBytesPerFFToSend = tgt_packet_sz / n_ff_used; +#endif + + // Check if there is enough data if (nBytesPerFFToSend == 0) return 0; // Limit to maximum sample number - THIS IS A POSSIBLE ERROR SOURCE IF TOO MANY SAMPLE WOULD NEED TO BE SENT BUT CAN NOT! nBytesPerFFToSend = tu_min16(nBytesPerFFToSend, capPerFF); +#if !CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL // Round to full number of samples (flooring) - nBytesPerFFToSend = (nBytesPerFFToSend / nBytesToCopy) * nBytesToCopy; + uint16_t const nSlotSize = audio->n_channels_per_ff_tx * audio->n_bytes_per_sampe_tx; + nBytesPerFFToSend = (nBytesPerFFToSend / nSlotSize) * nSlotSize; +#endif // Encode uint8_t * dst; @@ -1489,6 +1567,9 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin #if CFG_TUD_AUDIO_ENABLE_EP_IN ep_in = desc_ep->bEndpointAddress; ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + _audiod_fct[i].interval_tx = desc_ep->bInterval; + #endif #endif } else { @@ -1607,6 +1688,11 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * audio->ep_in = 0; // Necessary? + #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + audio->packet_sz_tx[0] = 0; + audio->packet_sz_tx[1] = 0; + audio->packet_sz_tx[2] = 0; + #endif } #endif // CFG_TUD_AUDIO_ENABLE_EP_IN @@ -1657,7 +1743,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Find correct interface if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const * )p_desc)->bInterfaceNumber == itf && ((tusb_desc_interface_t const * )p_desc)->bAlternateSetting == alt) { -#if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_ENABLE_DECODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL uint8_t const * p_desc_parse_for_params = p_desc; #endif // From this point forward follow the EP descriptors associated to the current alternate setting interface - Open EPs if necessary @@ -1686,12 +1772,13 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * audio->ep_in_sz = tu_edpt_packet_size(desc_ep); // If software encoding is enabled, parse for the corresponding parameters - doing this here means only AS interfaces with EPs get scanned for parameters - #if CFG_TUD_AUDIO_ENABLE_ENCODING + #if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL audiod_parse_for_AS_params(audio, p_desc_parse_for_params, p_desc_end, itf); // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / audio->n_bytes_per_sampe_tx) * audio->n_bytes_per_sampe_tx); + #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING + const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / (audio->n_channels_per_ff_tx * audio->n_bytes_per_sampe_tx)) + * (audio->n_channels_per_ff_tx * audio->n_bytes_per_sampe_tx)); for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { tu_fifo_config(&audio->tx_supp_ff[cnt], audio->tx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); @@ -2404,7 +2491,7 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) return false; } -#if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_ENABLE_DECODING +#if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) // p_desc points to the AS interface of alternate setting zero // itf is the interface number of the corresponding interface - we check if the interface belongs to EP in or EP out to see if it is a TX or RX parameter // Currently, only AS interfaces with an EP (in or out) are supposed to be parsed for! @@ -2455,7 +2542,7 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * } // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING || CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING +#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_FORMAT_TYPE && ((audio_desc_type_I_format_t const * )p_desc)->bFormatType == AUDIO_FORMAT_TYPE_I) { #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT @@ -2491,6 +2578,31 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * } #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +static bool audiod_tx_calc_packet_size(const uint16_t* norminal_size, uint16_t data_size, uint16_t fifo_size, uint16_t* packet_size) +{ + TU_VERIFY(norminal_size[1]); + + // This flow control method need a FIFO size of 4*Navg + TU_VERIFY(norminal_size[1] <= fifo_size * 4); + + if (data_size < norminal_size[0]) + *packet_size = 0; + else + { + uint16_t slot_size = norminal_size[2] - norminal_size[1]; + if (data_size < fifo_size / 2 - slot_size) + *packet_size = norminal_size[0]; + else if (data_size > fifo_size / 2 + slot_size) + *packet_size = norminal_size[2]; + else + *packet_size = norminal_size[1]; + } + + return true; +} +#endif + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 7c88b99fc..4cb3ca84c 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -181,6 +181,11 @@ #endif #endif +// (For TYPE-I format only) Flow control is necessary to allow IN ep send correct amount of data, unless it's a virtual device where data is perfectly synchronized to USB clock. +#ifndef CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +#define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 +#endif + // Enable/disable feedback EP (required for asynchronous RX applications) #ifndef CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 0 // Feedback - 0 or 1 @@ -392,6 +397,10 @@ tu_fifo_t* tud_audio_n_get_tx_support_ff (uint8_t func_id, uint8_t ff_i uint16_t tud_audio_int_ctr_n_write (uint8_t func_id, uint8_t const* buffer, uint16_t len); #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +bool tud_audio_n_set_tx_flow_control (uint8_t func_id, uint32_t sample_rate); +#endif + //--------------------------------------------------------------------+ // Application API (Interface0) //--------------------------------------------------------------------+ @@ -670,6 +679,13 @@ static inline uint16_t tud_audio_int_ctr_write(uint8_t const* buffer, uint16_t l } #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +static inline bool tud_audio_set_tx_flow_control(uint32_t sample_rate) +{ + return tud_audio_n_set_tx_flow_control(0, sample_rate); +} +#endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP static inline bool tud_audio_fb_set(uint32_t feedback) From 0a1d6cf4d028bce2248da01b8cc13aa4673e61b5 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 17 Oct 2023 13:06:55 +0200 Subject: [PATCH 13/82] Read sample rate directly from control transfer to eliminate callback. --- .../device/audio_4_channel_mic/src/main.c | 5 +- src/class/audio/audio_device.c | 343 ++++++++++-------- src/class/audio/audio_device.h | 10 - 3 files changed, 194 insertions(+), 164 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 52e6d71f7..9c37315c8 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -407,9 +407,8 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * { case AUDIO_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); - // Set sample rate for flow control - tud_audio_set_tx_flow_control(sampFreq); - return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); + // Buffered control transfer is needed for IN flow control to work + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); case AUDIO_CS_REQ_RANGE: TU_LOG2(" Get Sample Freq. range\r\n"); diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 9299440c9..e246281be 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -461,7 +461,8 @@ static inline uint8_t tu_desc_subtype(void const* desc) #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL -static bool audiod_tx_calc_packet_size(const uint16_t* norminal_size, uint16_t data_size, uint16_t fifo_size, uint16_t* packet_size); +static bool audiod_calc_tx_packet_sz(audiod_function_t* audio); +static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_size); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -832,58 +833,6 @@ uint16_t tud_audio_int_ctr_n_write(uint8_t func_id, uint8_t const* buffer, uint1 #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - -bool tud_audio_n_set_tx_flow_control(uint8_t func_id, uint32_t sample_rate) -{ - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - audiod_function_t* audio = &_audiod_fct[func_id]; - - TU_VERIFY(audio->format_type_tx == AUDIO_FORMAT_TYPE_I); - TU_VERIFY(audio->n_channels_tx); - TU_VERIFY(audio->n_bytes_per_sampe_tx); - TU_VERIFY(audio->interval_tx); - - if (sample_rate == 0) - { - audio->packet_sz_tx[0] = 0; - audio->packet_sz_tx[1] = 0; - audio->packet_sz_tx[2] = 0; - return false; - } - - const uint8_t interval = (tud_speed_get() == TUSB_SPEED_FULL) ? audio->interval_tx : 1 << (audio->interval_tx - 1); - - const uint32_t sample_normimal = sample_rate * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); - const uint32_t sample_reminder = sample_rate * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); - - const uint16_t packet_sz_tx_min = (sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; - const uint16_t packet_sz_tx_norm = sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; - const uint16_t packet_sz_tx_max = (sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; - - TU_ASSERT(packet_sz_tx_max <= audio->ep_in_sz); - - // Frmt20.pdf 2.3.1.1 USB Packets - if (sample_reminder) - { - // All virtual frame packets must either contain INT(nav) audio slots (small VFP) or INT(nav)+1 (large VFP) audio slots - audio->packet_sz_tx[0] = packet_sz_tx_norm; - audio->packet_sz_tx[1] = packet_sz_tx_norm; - audio->packet_sz_tx[2] = packet_sz_tx_max; - } else - { - // In the case where nav = INT(nav), ni may vary between INT(nav)-1 (small VFP), INT(nav) - // (medium VFP) and INT(nav)+1 (large VFP). - audio->packet_sz_tx[0] = packet_sz_tx_min; - audio->packet_sz_tx[1] = packet_sz_tx_norm; - audio->packet_sz_tx[2] = packet_sz_tx_max; - } - - return true; -} - -#endif - // This function is called once a transmit of an audio packet was successfully completed. Here, we encode samples and place it in IN EP's buffer for next transmission. // If you prefer your own (more efficient) implementation suiting your purpose set CFG_TUD_AUDIO_ENABLE_ENCODING = 0 and use tud_audio_n_write. @@ -949,12 +898,8 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) #else // No support FIFOs, if no linear buffer required schedule transmit, else put data into linear buffer and schedule #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - uint16_t tgt_packet_sz; // packet_sz_tx is based on total packet size, here we want size for each support buffer. - if (audiod_tx_calc_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, &tgt_packet_sz)) - n_bytes_tx = tgt_packet_sz; - else - n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz); + n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_sz); #else n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz); // Limit up to max packet size, more can not be done for ISO #endif @@ -1056,7 +1001,6 @@ static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audi // Determine amount of samples uint8_t const n_ff_used = audio->n_ff_used_tx; - uint16_t const capPerFF = audio->ep_in_sz / n_ff_used; // Sample capacity per FIFO in bytes uint16_t nBytesPerFFToSend = tu_fifo_count(&audio->tx_supp_ff[0]); uint8_t cnt_ff; @@ -1070,19 +1014,18 @@ static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audi } #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - uint16_t tgt_packet_sz; + const uint16_t norm_packet_sz_tx[3] = {audio->packet_sz_tx[0] / n_ff_used, + audio->packet_sz_tx[1] / n_ff_used, + audio->packet_sz_tx[2] / n_ff_used}; // packet_sz_tx is based on total packet size, here we want size for each support buffer. - if (audiod_tx_calc_packet_size(audio->packet_sz_tx, nBytesPerFFToSend * n_ff_used, audio->tx_supp_ff[0].depth * n_ff_used, &tgt_packet_sz)) - nBytesPerFFToSend = tgt_packet_sz / n_ff_used; -#endif - + nBytesPerFFToSend = audiod_tx_packet_size(norm_packet_sz_tx, nBytesPerFFToSend, audio->tx_supp_ff[0].depth, audio->ep_in_sz / n_ff_used); + // Check if there is enough data + if (nBytesPerFFToSend == 0) return 0; +#else // Check if there is enough data if (nBytesPerFFToSend == 0) return 0; - // Limit to maximum sample number - THIS IS A POSSIBLE ERROR SOURCE IF TOO MANY SAMPLE WOULD NEED TO BE SENT BUT CAN NOT! - nBytesPerFFToSend = tu_min16(nBytesPerFFToSend, capPerFF); - -#if !CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + nBytesPerFFToSend = tu_min16(nBytesPerFFToSend, audio->ep_in_sz / n_ff_used); // Round to full number of samples (flooring) uint16_t const nSlotSize = audio->n_channels_per_ff_tx * audio->n_bytes_per_sampe_tx; nBytesPerFFToSend = (nBytesPerFFToSend / nSlotSize) * nSlotSize; @@ -1349,7 +1292,7 @@ void audiod_init(void) #endif // CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING // Set encoding parameters for Type_I formats -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING switch (i) { #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 @@ -1529,84 +1472,114 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin } #if USE_ISO_EP_ALLOCATION - #if CFG_TUD_AUDIO_ENABLE_EP_IN - uint8_t ep_in = 0; - uint16_t ep_in_size = 0; - #endif - - #if CFG_TUD_AUDIO_ENABLE_EP_OUT - uint8_t ep_out = 0; - uint16_t ep_out_size = 0; - #endif - - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - uint8_t ep_fb = 0; - #endif - - uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; - while (p_desc < p_desc_end) { - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) - { - tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; - if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) - { - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Explicit feedback EP - if (desc_ep->bmAttributes.usage == 1) - { - ep_fb = desc_ep->bEndpointAddress; - } - #endif - // Data EP - if (desc_ep->bmAttributes.usage == 0) - { - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { #if CFG_TUD_AUDIO_ENABLE_EP_IN - ep_in = desc_ep->bEndpointAddress; - ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); - #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - _audiod_fct[i].interval_tx = desc_ep->bInterval; - #endif + uint8_t ep_in = 0; + uint16_t ep_in_size = 0; #endif - } else - { + #if CFG_TUD_AUDIO_ENABLE_EP_OUT - ep_out = desc_ep->bEndpointAddress; - ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); + uint8_t ep_out = 0; + uint16_t ep_out_size = 0; #endif + + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + uint8_t ep_fb = 0; + #endif + uint8_t const *p_desc = _audiod_fct[i].p_desc; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + while (p_desc < p_desc_end) + { + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) + { + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) + { + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + // Explicit feedback EP + if (desc_ep->bmAttributes.usage == 1) + { + ep_fb = desc_ep->bEndpointAddress; + } + #endif + // Data EP + if (desc_ep->bmAttributes.usage == 0) + { + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) + { + #if CFG_TUD_AUDIO_ENABLE_EP_IN + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + #endif + } else + { + #if CFG_TUD_AUDIO_ENABLE_EP_OUT + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); + #endif + } + } + + } + } + + p_desc = tu_desc_next(p_desc); + } + + #if CFG_TUD_AUDIO_ENABLE_EP_IN + if (ep_in) + { + usbd_edpt_iso_alloc(rhport, ep_in, ep_in_size); + } + #endif + + #if CFG_TUD_AUDIO_ENABLE_EP_OUT + if (ep_out) + { + usbd_edpt_iso_alloc(rhport, ep_out, ep_out_size); + } + #endif + + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + if (ep_fb) + { + usbd_edpt_iso_alloc(rhport, ep_fb, 4); + } + #endif + } +#endif // USE_ISO_EP_ALLOCATION + +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + { + uint8_t const *p_desc = _audiod_fct[i].p_desc; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + while (p_desc < p_desc_end) + { + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) + { + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) + { + if (desc_ep->bmAttributes.usage == 0) + { + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) + { + _audiod_fct[i].interval_tx = desc_ep->bInterval; + } } } - + } else + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL) + { + if(tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) + { + _audiod_fct[i].bclock_id_tx = p_desc[8]; + } } + p_desc = tu_desc_next(p_desc); } - p_desc = tu_desc_next(p_desc); } - - #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (ep_in) - { - usbd_edpt_iso_alloc(rhport, ep_in, ep_in_size); - } - #endif - - #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (ep_out) - { - usbd_edpt_iso_alloc(rhport, ep_out, ep_out_size); - } - #endif - - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (ep_fb) - { - usbd_edpt_iso_alloc(rhport, ep_fb, 4); - } - #endif - -#endif // USE_ISO_EP_ALLOCATION +#endif // CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL break; } @@ -1910,6 +1883,10 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * if (disable) usbd_sof_enable(rhport, false); #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + audiod_calc_tx_packet_sz(audio); +#endif + tud_control_status(rhport, p_request); return true; @@ -2352,6 +2329,19 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req // Copy into buffer TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t)len)); +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + // Find data for sampling_frequency_control + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) + { + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO_CS_REQ_CUR) + { + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + } + } +#endif + // Schedule transmit return tud_control_xfer(rhport, p_request, (void*)_audiod_fct[func_id].ctrl_buf, len); } @@ -2579,28 +2569,79 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL -static bool audiod_tx_calc_packet_size(const uint16_t* norminal_size, uint16_t data_size, uint16_t fifo_size, uint16_t* packet_size) + +static bool audiod_calc_tx_packet_sz(audiod_function_t* audio) { - TU_VERIFY(norminal_size[1]); + TU_VERIFY(audio->format_type_tx == AUDIO_FORMAT_TYPE_I); + TU_VERIFY(audio->n_channels_tx); + TU_VERIFY(audio->n_bytes_per_sampe_tx); + TU_VERIFY(audio->interval_tx); + TU_VERIFY(audio->sample_rate_tx); - // This flow control method need a FIFO size of 4*Navg - TU_VERIFY(norminal_size[1] <= fifo_size * 4); + const uint8_t interval = (tud_speed_get() == TUSB_SPEED_FULL) ? audio->interval_tx : 1 << (audio->interval_tx - 1); - if (data_size < norminal_size[0]) - *packet_size = 0; - else + const uint32_t sample_normimal = audio->sample_rate_tx * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); + const uint32_t sample_reminder = audio->sample_rate_tx * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); + + const uint16_t packet_sz_tx_min = (sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + const uint16_t packet_sz_tx_norm = sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + const uint16_t packet_sz_tx_max = (sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + + // Endpoint size must larger than packet size + TU_ASSERT(packet_sz_tx_max <= audio->ep_in_sz); + + // Frmt20.pdf 2.3.1.1 USB Packets + if (sample_reminder) { - uint16_t slot_size = norminal_size[2] - norminal_size[1]; - if (data_size < fifo_size / 2 - slot_size) - *packet_size = norminal_size[0]; - else if (data_size > fifo_size / 2 + slot_size) - *packet_size = norminal_size[2]; - else - *packet_size = norminal_size[1]; + // All virtual frame packets must either contain INT(nav) audio slots (small VFP) or INT(nav)+1 (large VFP) audio slots + audio->packet_sz_tx[0] = packet_sz_tx_norm; + audio->packet_sz_tx[1] = packet_sz_tx_norm; + audio->packet_sz_tx[2] = packet_sz_tx_max; + } else + { + // In the case where nav = INT(nav), ni may vary between INT(nav)-1 (small VFP), INT(nav) + // (medium VFP) and INT(nav)+1 (large VFP). + audio->packet_sz_tx[0] = packet_sz_tx_min; + audio->packet_sz_tx[1] = packet_sz_tx_norm; + audio->packet_sz_tx[2] = packet_sz_tx_max; } return true; } + +static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_depth) +{ + // Flow control need a FIFO size of at least 4*Navg + if(norminal_size[1] && norminal_size[1] <= fifo_depth * 4) + { + uint16_t packet_size; + uint16_t slot_size = norminal_size[2] - norminal_size[1]; + if (data_count < fifo_depth / 2 - slot_size) + { + if (data_count < norminal_size[0]) + { + // If you get here frequently, then your I2S clock deviation is too big ! + packet_size = 0; + } else + { + packet_size = norminal_size[0]; + } + } + else if (data_count > fifo_depth / 2 + slot_size) + { + packet_size = norminal_size[2]; + } else + { + packet_size = norminal_size[1]; + } + // Normally this cap is not necessary + return tu_min16(packet_size, max_depth); + } else + { + return tu_min16(data_count, max_depth); + } +} + #endif #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 4cb3ca84c..ef3e12a06 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -397,9 +397,6 @@ tu_fifo_t* tud_audio_n_get_tx_support_ff (uint8_t func_id, uint8_t ff_i uint16_t tud_audio_int_ctr_n_write (uint8_t func_id, uint8_t const* buffer, uint16_t len); #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL -bool tud_audio_n_set_tx_flow_control (uint8_t func_id, uint32_t sample_rate); -#endif //--------------------------------------------------------------------+ // Application API (Interface0) @@ -679,13 +676,6 @@ static inline uint16_t tud_audio_int_ctr_write(uint8_t const* buffer, uint16_t l } #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL -static inline bool tud_audio_set_tx_flow_control(uint32_t sample_rate) -{ - return tud_audio_n_set_tx_flow_control(0, sample_rate); -} -#endif - #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP static inline bool tud_audio_fb_set(uint32_t feedback) From d83a2107883c8a6224ab99f248a59b216a8d2a82 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 17 Oct 2023 15:18:05 +0200 Subject: [PATCH 14/82] Add blackout time. --- src/class/audio/audio_device.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index e246281be..d32ed56b2 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -2614,25 +2614,39 @@ static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t da // Flow control need a FIFO size of at least 4*Navg if(norminal_size[1] && norminal_size[1] <= fifo_depth * 4) { + // Use blackout to prioritize normal size packet + static int ctrl_blackout = 0; uint16_t packet_size; uint16_t slot_size = norminal_size[2] - norminal_size[1]; - if (data_count < fifo_depth / 2 - slot_size) + if (data_count < norminal_size[0]) { - if (data_count < norminal_size[0]) - { // If you get here frequently, then your I2S clock deviation is too big ! packet_size = 0; - } else - { - packet_size = norminal_size[0]; - } - } - else if (data_count > fifo_depth / 2 + slot_size) + } else + if (data_count < fifo_depth / 2 - slot_size && !ctrl_blackout) + { + packet_size = norminal_size[0]; + ctrl_blackout = 10; + } else + if (data_count > fifo_depth / 2 + slot_size && !ctrl_blackout) { packet_size = norminal_size[2]; + if(norminal_size[0] == norminal_size[1]) + { + // nav = INT(nav) + 1 + ctrl_blackout = 2; + } else + { + // nav = INT(nav) + ctrl_blackout = 10; + } } else { packet_size = norminal_size[1]; + if (ctrl_blackout) + { + ctrl_blackout--; + } } // Normally this cap is not necessary return tu_min16(packet_size, max_depth); From 22aefd6aba9cbba0faca803fb9f331ae6b0fae56 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 17 Oct 2023 22:48:54 +0700 Subject: [PATCH 15/82] add cmake support for u575 nucleo --- .idea/cmake.xml | 3 +- .../stm32u575eval/STM32U575AIIXQ_FLASH.ld | 167 ------------------ hw/bsp/stm32u5/boards/stm32u575eval/board.mk | 2 +- .../stm32u575nucleo/STM32U575ZITXQ_FLASH.ld | 167 ------------------ .../stm32u5/boards/stm32u575nucleo/board.mk | 4 +- hw/bsp/stm32u5/family.cmake | 1 + 6 files changed, 6 insertions(+), 338 deletions(-) delete mode 100644 hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld delete mode 100644 hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 9721af5ea..88e0e27ad 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -56,7 +56,6 @@ - @@ -64,6 +63,8 @@ + + \ No newline at end of file diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld b/hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld deleted file mode 100644 index 03c022bc2..000000000 --- a/hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : STM32CubeIDE -** -** Abstract : Linker script for STM32U575xI Device from STM32U5 series -** 2048Kbytes FLASH -** 784Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** Copyright (c) 2022 STMicroelectronics. -** All rights reserved. -** -** This software is licensed under terms that can be found in the LICENSE file -** in the root directory of this software component. -** If no LICENSE file comes with this software, it is provided AS-IS. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 768K - SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - KEEP(*(.isr_vector)) /* Startup code */ - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - } >FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } >FLASH - - .ARM : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk index a75b2af78..37d59023f 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk @@ -2,7 +2,7 @@ CFLAGS += \ -DSTM32U575xx \ # All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/STM32U575AIIXQ_FLASH.ld +LD_FILE = ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U575xx_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld b/hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld deleted file mode 100644 index 03c022bc2..000000000 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/STM32U575ZITXQ_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : STM32CubeIDE -** -** Abstract : Linker script for STM32U575xI Device from STM32U5 series -** 2048Kbytes FLASH -** 784Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** Copyright (c) 2022 STMicroelectronics. -** All rights reserved. -** -** This software is licensed under terms that can be found in the LICENSE file -** in the root directory of this software component. -** If no LICENSE file comes with this software, it is provided AS-IS. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 768K - SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - KEEP(*(.isr_vector)) /* Startup code */ - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - } >FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } >FLASH - - .ARM : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk index 0c7948860..f07157801 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk @@ -2,9 +2,9 @@ CFLAGS += \ -DSTM32U575xx \ # All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/STM32U575ZITXQ_FLASH.ld +LD_FILE = ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U575xx_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s # For flash-jlink target -JLINK_DEVICE = stm32u575 +JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 8f9ac1109..2e4ed7d50 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -37,6 +37,7 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_icache.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c From a5a77af11ea2ec37f74ecd81eb1799cc38c6fbf1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 17 Oct 2023 23:53:09 +0700 Subject: [PATCH 16/82] add board.mk for u575 nucleo --- hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake new file mode 100644 index 000000000..73bd10033 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32u575xx) +set(JLINK_DEVICE stm32u575zi) + +set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U575xx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32U575xx + ) +endfunction() From e9d894fe6620d623bc393698a971d08d43516e01 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 17 Oct 2023 15:23:05 +0200 Subject: [PATCH 17/82] Fix compile. --- .../audio_4_channel_mic/src/tusb_config.h | 5 ++-- src/class/audio/audio_device.c | 26 +++++++++---------- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index d1e19c5a1..f86b63528 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -115,7 +115,8 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_ENABLE_ENCODING 0 +#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 +#define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 #if CFG_TUD_AUDIO_ENABLE_ENCODING @@ -129,7 +130,7 @@ extern "C" { #else -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX 4 * CFG_TUD_AUDIO_EP_SZ_IN +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ 4 * CFG_TUD_AUDIO_EP_SZ_IN #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index d32ed56b2..220771aec 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -217,7 +217,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; // Software encoding/decoding support FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; + CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -225,7 +225,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; + CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -233,7 +233,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; + CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -243,7 +243,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; + CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -251,7 +251,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; + CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -259,7 +259,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; + CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -2519,7 +2519,7 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * } #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT +#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING if (as_itf == audio->ep_out_as_intf_num) { audio->n_channels_rx = ((audio_desc_cs_as_interface_t const * )p_desc)->bNrChannels; @@ -2552,7 +2552,7 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * } #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT +#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING if (as_itf == audio->ep_out_as_intf_num) { audio->n_bytes_per_sampe_rx = ((audio_desc_type_I_format_t const * )p_desc)->bSubslotSize; @@ -2580,12 +2580,12 @@ static bool audiod_calc_tx_packet_sz(audiod_function_t* audio) const uint8_t interval = (tud_speed_get() == TUSB_SPEED_FULL) ? audio->interval_tx : 1 << (audio->interval_tx - 1); - const uint32_t sample_normimal = audio->sample_rate_tx * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); - const uint32_t sample_reminder = audio->sample_rate_tx * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000); + const uint16_t sample_normimal = (uint16_t)(audio->sample_rate_tx * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000)); + const uint16_t sample_reminder = (uint16_t)(audio->sample_rate_tx * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000)); - const uint16_t packet_sz_tx_min = (sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; - const uint16_t packet_sz_tx_norm = sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; - const uint16_t packet_sz_tx_max = (sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx; + const uint16_t packet_sz_tx_min = (uint16_t)((sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx); + const uint16_t packet_sz_tx_norm = (uint16_t)(sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sampe_tx); + const uint16_t packet_sz_tx_max = (uint16_t)((sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sampe_tx); // Endpoint size must larger than packet size TU_ASSERT(packet_sz_tx_max <= audio->ep_in_sz); From ade8a19aefa91e4aba0bbb0ddeafbcd041c6a4c3 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 17 Oct 2023 21:21:52 +0200 Subject: [PATCH 18/82] Put sw_buf in USB section only if necessary. --- src/class/audio/audio_device.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 220771aec..9712afde9 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -110,24 +110,36 @@ #error Maximum number of audio functions restricted to three! #endif +// Put sw_buf in USB section only if necessary +#if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING +#define IN_SW_BUF_MEM_SECTION +#else +#define IN_SW_BUF_MEM_SECTION CFG_TUD_MEM_SECTION +#endif +#if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING +#define OUT_SW_BUF_MEM_SECTION +#else +#define OUT_SW_BUF_MEM_SECTION CFG_TUD_MEM_SECTION +#endif + // EP IN software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; + IN_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_1; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; + IN_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_2; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; + IN_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_3; // No need for read mutex as only USB driver reads from FIFO #endif @@ -154,21 +166,21 @@ // EP OUT software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; + OUT_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_1; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; + OUT_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_2; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; + OUT_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_3; // No need for write mutex as only USB driver writes into FIFO #endif From 5025e80c9ebd117f077750d7021c152f8c762764 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Oct 2023 15:26:59 +0700 Subject: [PATCH 19/82] adding u5a5 nucleo --- .idea/cmake.xml | 1 + .../boards/stm32u5a5nucleo/board.cmake | 10 ++ hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 111 ++++++++++++++++++ .../stm32u5/boards/stm32u5a5nucleo/board.mk | 10 ++ tools/get_deps.py | 2 +- 5 files changed, 133 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake create mode 100644 hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h create mode 100644 hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 88e0e27ad..5e0964817 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -65,6 +65,7 @@ + \ No newline at end of file diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake new file mode 100644 index 000000000..eea16213b --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32u5a5xx) +set(JLINK_DEVICE stm32u5a5zj) + +set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U5A9xx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32U5A5xx + ) +endfunction() diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h new file mode 100644 index 000000000..54a6d4cd7 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +// LED GREEN +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_7 +#define LED_STATE_ON 1 + +// BUTTON +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for STLink VCOM +#define UART_DEV LPUART1 +#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOG +#define UART_GPIO_AF GPIO_AF8_LPUART1 +#define UART_TX_PIN GPIO_PIN_7 +#define UART_RX_PIN GPIO_PIN_8 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ + +static inline void board_clock_init(void) +{ + + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /* Enable Power Clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 10; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 2; + RCC_OscInitStruct.PLL.PLLR = 1; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48; + PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48; + + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); +} + + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk new file mode 100644 index 000000000..48a4206a6 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk @@ -0,0 +1,10 @@ +CFLAGS += \ + -DSTM32U5A5xx \ + +# All source paths should be relative to the top level. +LD_FILE = ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U5A9xx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32u575zi diff --git a/tools/get_deps.py b/tools/get_deps.py index 1fac291a3..9fdefac9d 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -108,7 +108,7 @@ deps_optional = { 'd922865fc0326a102c26211c44b8e42f52c1e53d', 'stm32l5'], 'hw/mcu/st/cmsis_device_u5': ['https://github.com/STMicroelectronics/cmsis_device_u5.git', - 'bc00f3c9d8a4e25220f84c26d414902cc6bdf566', + '06d7edade7167b0eafdd550bf77cfc4fa98eae2e', 'stm32u5'], 'hw/mcu/st/cmsis_device_wb': ['https://github.com/STMicroelectronics/cmsis_device_wb.git', '9c5d1920dd9fabbe2548e10561d63db829bb744f', From 27a2c8cba4dc7c56509bb3d9b6415a6fe8f638ac Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Oct 2023 18:43:07 +0700 Subject: [PATCH 20/82] adding nulceo stm32u5a5, fix clock configure issue dwc2 core stuck at reset --- hw/bsp/stm32u5/boards/stm32u575eval/board.h | 15 +- hw/bsp/stm32u5/boards/stm32u575nucleo/board.h | 15 +- .../stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld | 167 +++++++++ .../boards/stm32u5a5nucleo/board.cmake | 2 +- hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 57 +-- .../stm32u5/boards/stm32u5a5nucleo/board.mk | 2 +- .../cubemx/stm32u5a5nucleo.ioc | 352 ++++++++++++++++++ hw/bsp/stm32u5/family.c | 53 ++- src/common/tusb_mcu.h | 13 +- src/portable/synopsys/dwc2/dwc2_stm32.h | 10 +- src/tusb_option.h | 6 +- tools/get_deps.py | 21 +- 12 files changed, 643 insertions(+), 70 deletions(-) create mode 100644 hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld create mode 100644 hw/bsp/stm32u5/boards/stm32u5a5nucleo/cubemx/stm32u5a5nucleo.ioc diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h index 5562b95a8..bd91502af 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -55,12 +55,10 @@ extern "C" // RCC Clock //--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; +static void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; + RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 }; /* Enable Power Clock*/ __HAL_RCC_PWR_CLK_ENABLE(); @@ -94,7 +92,8 @@ static inline void board_clock_init(void) /** Initializes the CPU, AHB and APB buses clocks */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; + RCC_ClkInitStruct.ClockType = + RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; @@ -104,6 +103,8 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); } +static void SystemPower_Config(void) { +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h index 54a6d4cd7..6d244d418 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -54,12 +54,10 @@ extern "C" // RCC Clock //--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; +static void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; + RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 }; /* Enable Power Clock */ __HAL_RCC_PWR_CLK_ENABLE(); @@ -93,7 +91,8 @@ static inline void board_clock_init(void) /** Initializes the CPU, AHB and APB buses clocks */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; + RCC_ClkInitStruct.ClockType = + RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; @@ -103,6 +102,8 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); } +static void SystemPower_Config(void) { +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld new file mode 100644 index 000000000..8aa68a6a6 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld @@ -0,0 +1,167 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U5A5xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2512Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2023 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake index eea16213b..24d4ef95a 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake @@ -1,7 +1,7 @@ set(MCU_VARIANT stm32u5a5xx) set(JLINK_DEVICE stm32u5a5zj) -set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U5A9xx_FLASH.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32U5A5ZJTXQ_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 54a6d4cd7..37b008727 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -54,46 +54,44 @@ extern "C" // RCC Clock //--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ +static void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - /* Enable Power Clock */ __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWREx_EnableVddA(); /** Configure the main internal regulator output voltage - */ - HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + */ + if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) { + Error_Handler(); + } /** Initializes the CPU, AHB and APB buses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1; RCC_OscInitStruct.PLL.PLLM = 1; - RCC_OscInitStruct.PLL.PLLN = 10; - RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLN = 20; + RCC_OscInitStruct.PLL.PLLP = 8; RCC_OscInitStruct.PLL.PLLQ = 2; - RCC_OscInitStruct.PLL.PLLR = 1; + RCC_OscInitStruct.PLL.PLLR = 2; RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1; RCC_OscInitStruct.PLL.PLLFRACN = 0; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48; - PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48; - - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 + | RCC_CLOCKTYPE_PCLK3; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; @@ -103,6 +101,19 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); } +static void SystemPower_Config(void) { + HAL_PWREx_EnableVddIO2(); + + /* + * Switch to SMPS regulator instead of LDO + */ + if (HAL_PWREx_ConfigSupply(PWR_SMPS_SUPPLY) != HAL_OK) { + Error_Handler(); + } +/* USER CODE BEGIN PWR */ +/* USER CODE END PWR */ +} + #ifdef __cplusplus } diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk index 48a4206a6..13025efa6 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk @@ -2,7 +2,7 @@ CFLAGS += \ -DSTM32U5A5xx \ # All source paths should be relative to the top level. -LD_FILE = ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U5A9xx_FLASH.ld +LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/cubemx/stm32u5a5nucleo.ioc b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/cubemx/stm32u5a5nucleo.ioc new file mode 100644 index 000000000..289734040 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/cubemx/stm32u5a5nucleo.ioc @@ -0,0 +1,352 @@ +#MicroXplorer Configuration settings - do not modify +ADC1.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_2 +ADC1.IPParameters=Rank-1\#ChannelRegularConversion,master,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,OffsetNumber-1\#ChannelRegularConversion,MonitoredBy-1\#ChannelRegularConversion,NbrOfConversionFlag +ADC1.MonitoredBy-1\#ChannelRegularConversion=__NULL +ADC1.NbrOfConversionFlag=1 +ADC1.OffsetNumber-1\#ChannelRegularConversion=ADC_OFFSET_NONE +ADC1.Rank-1\#ChannelRegularConversion=1 +ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_5CYCLE +ADC1.master=1 +CAD.formats= +CAD.pinconfig= +CAD.provider= +CORTEX_M33_NS.userName=CORTEX_M33 +File.Version=6 +GPDMA1.DIRECTION_GPDMACH0=DMA_MEMORY_TO_PERIPH +GPDMA1.DIRECTION_GPDMACH3=DMA_MEMORY_TO_PERIPH +GPDMA1.IPHANDLE_GPDMACH0-SIMPLEREQUEST_GPDMACH0=__NULL +GPDMA1.IPHANDLE_GPDMACH3-SIMPLEREQUEST_GPDMACH3=__NULL +GPDMA1.IPHANDLE_GPDMACH5-SIMPLEREQUEST_GPDMACH5=__NULL +GPDMA1.IPParameters=IPHANDLE_GPDMACH5-SIMPLEREQUEST_GPDMACH5,REQUEST_GPDMACH5,IPHANDLE_GPDMACH3-SIMPLEREQUEST_GPDMACH3,REQUEST_GPDMACH3,DIRECTION_GPDMACH3,IPHANDLE_GPDMACH0-SIMPLEREQUEST_GPDMACH0,REQUEST_GPDMACH0,DIRECTION_GPDMACH0,SRCINC_GPDMACH0 +GPDMA1.REQUEST_GPDMACH0=GPDMA1_REQUEST_USART1_TX +GPDMA1.REQUEST_GPDMACH3=GPDMA1_REQUEST_UCPD1_TX +GPDMA1.REQUEST_GPDMACH5=GPDMA1_REQUEST_UCPD1_RX +GPDMA1.SRCINC_GPDMACH0=DMA_SINC_INCREMENTED +GPIO.groupedBy=Group By Peripherals +KeepUserPlacement=false +MMTAppReg1.MEMORYMAP.AP=RW_priv_only +MMTAppReg1.MEMORYMAP.AppRegionName=RAM +MMTAppReg1.MEMORYMAP.ContextName=CortexM33 +MMTAppReg1.MEMORYMAP.CoreName=ARM Cortex-M33 +MMTAppReg1.MEMORYMAP.DefaultDataRegion=true +MMTAppReg1.MEMORYMAP.IPParameters=StartAddress,Size,CoreName,DefaultDataRegion,ContextName,Name,AP +MMTAppReg1.MEMORYMAP.Name=RAM +MMTAppReg1.MEMORYMAP.Size=2555904 +MMTAppReg1.MEMORYMAP.StartAddress=0x20000000 +MMTAppReg2.MEMORYMAP.AppRegionName=RAM Reserved Alias Region +MMTAppReg2.MEMORYMAP.CoreName=ARM Cortex-M33 +MMTAppReg2.MEMORYMAP.DefaultDataRegion=false +MMTAppReg2.MEMORYMAP.IPParameters=StartAddress,Size,CoreName,DefaultDataRegion,ReservedRegion,Name +MMTAppReg2.MEMORYMAP.Name=RAM Reserved Alias Region +MMTAppReg2.MEMORYMAP.ReservedRegion=true +MMTAppReg2.MEMORYMAP.Size=2555904 +MMTAppReg2.MEMORYMAP.StartAddress=0x0A000000 +MMTAppReg3.MEMORYMAP.AP=RO_priv_only +MMTAppReg3.MEMORYMAP.AppRegionName=FLASH +MMTAppReg3.MEMORYMAP.Cacheability=WTRA +MMTAppReg3.MEMORYMAP.ContextName=CortexM33 +MMTAppReg3.MEMORYMAP.CoreName=ARM Cortex-M33 +MMTAppReg3.MEMORYMAP.DefaultCodeRegion=true +MMTAppReg3.MEMORYMAP.DefaultDataRegion=false +MMTAppReg3.MEMORYMAP.IPParameters=StartAddress,Size,CoreName,DefaultDataRegion,MemType,ContextName,Name,AP,Cacheability,DefaultCodeRegion +MMTAppReg3.MEMORYMAP.MemType=ROM +MMTAppReg3.MEMORYMAP.Name=FLASH +MMTAppReg3.MEMORYMAP.Size=4194304 +MMTAppReg3.MEMORYMAP.StartAddress=0x08000000 +MMTAppRegionsCount=3 +MMTConfigApplied=false +Mcu.CPN=STM32U5A5ZJT6Q +Mcu.ContextProject=TrustZoneDisabled +Mcu.Family=STM32U5 +Mcu.IP0=ADC1 +Mcu.IP1=CORTEX_M33_NS +Mcu.IP10=UCPD1 +Mcu.IP11=USART1 +Mcu.IP12=USBPD +Mcu.IP13=USBX +Mcu.IP14=USB_OTG_HS +Mcu.IP2=GPDMA1 +Mcu.IP3=ICACHE +Mcu.IP4=MEMORYMAP +Mcu.IP5=NVIC +Mcu.IP6=PWR +Mcu.IP7=RCC +Mcu.IP8=SYS +Mcu.IP9=THREADX +Mcu.IPNb=15 +Mcu.Name=STM32U5A5ZJTxQ +Mcu.Package=LQFP144 +Mcu.Pin0=PH0-OSC_IN (PH0) +Mcu.Pin1=PH1-OSC_OUT (PH1) +Mcu.Pin10=VP_GPDMA1_VS_GPDMACH0 +Mcu.Pin11=VP_GPDMA1_VS_GPDMACH3 +Mcu.Pin12=VP_GPDMA1_VS_GPDMACH5 +Mcu.Pin13=VP_ICACHE_VS_ICACHE +Mcu.Pin14=VP_PWR_VS_DBSignals +Mcu.Pin15=VP_PWR_VS_SECSignals +Mcu.Pin16=VP_PWR_VS_LPOM +Mcu.Pin17=VP_SYS_VS_tim6 +Mcu.Pin18=VP_THREADX_VS_RTOSJjThreadXJjCoreJjDefault +Mcu.Pin19=VP_USBPD_VS_USBPD1 +Mcu.Pin2=PC1 +Mcu.Pin20=VP_USBPD_VS_PD3TYPEC +Mcu.Pin21=VP_USBPD_VS_usbpd_tim2 +Mcu.Pin22=VP_USBPD_VS_usbpd_usb_cohabitation +Mcu.Pin23=VP_USBX_Core_System +Mcu.Pin24=VP_USBX_UX Device CoreStack_HS +Mcu.Pin25=VP_USBX_UX Device Controller_HS +Mcu.Pin26=VP_USBX_UX Device CDC ACM Class_HS +Mcu.Pin27=VP_MEMORYMAP_VS_MEMORYMAP +Mcu.Pin3=PB15 +Mcu.Pin4=PG2 +Mcu.Pin5=PA9 +Mcu.Pin6=PA10 +Mcu.Pin7=PA11 +Mcu.Pin8=PA12 +Mcu.Pin9=PA15 (JTDI) +Mcu.PinsNb=28 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32U5A5ZJTxQ +MxCube.Version=6.9.2 +MxDb.Version=DB.6.0.92 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.GPDMA1_Channel0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true\:true +NVIC.GPDMA1_Channel3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true\:true +NVIC.GPDMA1_Channel5_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true\:true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false +NVIC.OTG_HS_IRQn=true\:7\:0\:true\:false\:true\:false\:true\:true\:true +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false +NVIC.SavedPendsvIrqHandlerGenerated=true +NVIC.SavedSvcallIrqHandlerGenerated=true +NVIC.SavedSystickIrqHandlerGenerated=true +NVIC.SysTick_IRQn=true\:0\:0\:true\:false\:false\:false\:false\:true\:false +NVIC.TIM6_IRQn=true\:15\:0\:false\:false\:true\:false\:false\:true\:true +NVIC.TimeBase=TIM6_IRQn +NVIC.TimeBaseIP=TIM6 +NVIC.UCPD1_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:false\:true +NVIC.USART1_IRQn=true\:6\:0\:true\:false\:true\:false\:true\:true\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false +PA10.GPIOParameters=GPIO_Speed,GPIO_PuPd +PA10.GPIO_PuPd=GPIO_PULLUP +PA10.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PA10.Mode=Asynchronous +PA10.Signal=USART1_RX +PA11.GPIOParameters=GPIO_Speed +PA11.GPIO_Speed=GPIO_SPEED_FREQ_LOW +PA11.Mode=Internal_Phy_Device +PA11.Signal=USB_OTG_HS_DM +PA12.GPIOParameters=GPIO_Speed +PA12.GPIO_Speed=GPIO_SPEED_FREQ_LOW +PA12.Mode=Internal_Phy_Device +PA12.Signal=USB_OTG_HS_DP +PA15\ (JTDI).Mode=Sink_AllSignals +PA15\ (JTDI).Signal=UCPD1_CC1 +PA9.GPIOParameters=GPIO_Speed,GPIO_PuPd +PA9.GPIO_PuPd=GPIO_PULLUP +PA9.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PA9.Mode=Asynchronous +PA9.Signal=USART1_TX +PB15.Mode=Sink_AllSignals +PB15.Signal=UCPD1_CC2 +PC1.Mode=IN2-Single-Ended +PC1.Signal=ADC1_IN2 +PG2.GPIOParameters=GPIO_Label +PG2.GPIO_Label=LED_RED +PG2.Locked=true +PG2.Signal=GPIO_Output +PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator +PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN +PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator +PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT +PWR.IPParameters=PowerMode +PWR.PowerMode=PWR_SMPS_SUPPLY +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32U5A5ZJTxQ +ProjectManager.Example=Ux_Device_CDC_ACM +ProjectManager.ExampleSource=MxCubeFw +ProjectManager.FirmwarePackage=STM32Cube FW_U5 V1.3.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LPBAM.generateCode= +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=stm32u5a5nucleo.ioc +ProjectManager.ProjectName=stm32u5a5nucleo +ProjectManager.ProjectStructure= +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_GPDMA1_Init-GPDMA1-false-HAL-true,4-MX_ICACHE_Init-ICACHE-false-HAL-true,5-MX_USART1_UART_Init-USART1-false-HAL-false,6-MX_UCPD1_Init-UCPD1-false-LL-true,7-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-true-HAL-false,8-MX_USBPD_Init-USBPD-false-HAL-false,9-MX_USBX_Init-USBX-false-HAL-false,10-MX_ADC1_Init-ADC1-false-HAL-true,11-MX_MEMORYMAP_Init-MEMORYMAP-false-HAL-true,0-MX_CORTEX_M33_NS_Init-CORTEX_M33_NS-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true +RCC.ADCFreq_Value=16000000 +RCC.ADF1Freq_Value=160000000 +RCC.AHBFreq_Value=160000000 +RCC.APB1Freq_Value=160000000 +RCC.APB1TimFreq_Value=160000000 +RCC.APB2Freq_Value=160000000 +RCC.APB2TimFreq_Value=160000000 +RCC.APB3Freq_Value=160000000 +RCC.CK48Freq_Value=48000000 +RCC.CRSFreq_Value=48000000 +RCC.CortexFreq_Value=160000000 +RCC.DACCLockSelectionVirtual=RCC_DAC1CLKSOURCE_LSI +RCC.DACFreq_Value=32000 +RCC.EPOD_VALUE=16000000 +RCC.FCLKCortexFreq_Value=160000000 +RCC.FDCANFreq_Value=160000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=160000000 +RCC.HSE_VALUE=16000000 +RCC.HSI48_VALUE=48000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=160000000 +RCC.I2C2Freq_Value=160000000 +RCC.I2C3Freq_Value=160000000 +RCC.I2C4Freq_Value=160000000 +RCC.I2C5Freq_Value=160000000 +RCC.I2C6Freq_Value=160000000 +RCC.IPParameters=ADCFreq_Value,ADF1Freq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,CK48Freq_Value,CRSFreq_Value,CortexFreq_Value,DACCLockSelectionVirtual,DACFreq_Value,EPOD_VALUE,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2C5Freq_Value,I2C6Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSIDIV_VALUE,LSI_VALUE,MCO1PinFreq_Value,MDF1Freq_Value,MSIClockRange,MSI_VALUE,OCTOSPIMFreq_Value,PLL1P,PLL2FRACN,PLL2PoutputFreq_Value,PLL2QoutputFreq_Value,PLL2RoutputFreq_Value,PLL3FRACN,PLL3PoutputFreq_Value,PLL3QoutputFreq_Value,PLL3RoutputFreq_Value,PLLFRACN,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSourceVirtual,RNGFreq_Value,SAESFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPI1Freq_Value,SPI2Freq_Value,SPI3Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBPHYCLockSelection,USBPHYFreq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOPLL2OutputFreq_Value,VCOPLL3OutputFreq_Value +RCC.LPTIM2Freq_Value=160000000 +RCC.LPUART1Freq_Value=160000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSE_VALUE=32768 +RCC.LSIDIV_VALUE=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=160000000 +RCC.MDF1Freq_Value=160000000 +RCC.MSIClockRange=RCC_MSIRANGE_0 +RCC.MSI_VALUE=48000000 +RCC.OCTOSPIMFreq_Value=160000000 +RCC.PLL1P=8 +RCC.PLL2FRACN=0 +RCC.PLL2PoutputFreq_Value=3096000000 +RCC.PLL2QoutputFreq_Value=3096000000 +RCC.PLL2RoutputFreq_Value=3096000000 +RCC.PLL3FRACN=0 +RCC.PLL3PoutputFreq_Value=3096000000 +RCC.PLL3QoutputFreq_Value=3096000000 +RCC.PLL3RoutputFreq_Value=3096000000 +RCC.PLLFRACN=0 +RCC.PLLN=20 +RCC.PLLPoutputFreq_Value=40000000 +RCC.PLLQoutputFreq_Value=160000000 +RCC.PLLRCLKFreq_Value=160000000 +RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE +RCC.RNGFreq_Value=48000000 +RCC.SAESFreq_Value=48000000 +RCC.SAI1Freq_Value=3096000000 +RCC.SAI2Freq_Value=3096000000 +RCC.SDMMCFreq_Value=40000000 +RCC.SPI1Freq_Value=160000000 +RCC.SPI2Freq_Value=160000000 +RCC.SPI3Freq_Value=160000000 +RCC.SYSCLKFreq_VALUE=160000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.UART4Freq_Value=160000000 +RCC.UART5Freq_Value=160000000 +RCC.USART1Freq_Value=160000000 +RCC.USART2Freq_Value=160000000 +RCC.USART3Freq_Value=160000000 +RCC.USART6Freq_Value=160000000 +RCC.USBPHYCLockSelection=RCC_USBPHYCLKSOURCE_HSE +RCC.USBPHYFreq_Value=16000000 +RCC.VCOInput2Freq_Value=48000000 +RCC.VCOInput3Freq_Value=48000000 +RCC.VCOInputFreq_Value=16000000 +RCC.VCOOutputFreq_Value=320000000 +RCC.VCOPLL2OutputFreq_Value=6192000000 +RCC.VCOPLL3OutputFreq_Value=6192000000 +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +USBX.BSP.number=1 +USBX.Core_System=1 +USBX.IPParameters=Core_System,UX_Device_CoreStack,UX_Device_Controller,UX_DEVICE_CDC_ACM,USBD_CDCACM_EPIN_ADDR,USBD_CDCACM_EPOUT_HS_MPS,USBD_CDCACM_EPIN_HS_MPS,UX_DEVICE_APP_MEM_POOL_SIZE,USBD_PRODUCT_STRING,UX_SLAVE_REQUEST_DATA_MAX_LENGTH,USBX_DEVICE_SYS_SIZE,USBD_PID,USBD_SERIAL_NUMBER,UX_SLAVE_REQUEST_CONTROL_MAX_LENGTH,USBD_CDCACM_EPINCMD_ADDR,MAX_POWER_IN_MILLI_AMPER +USBX.MAX_POWER_IN_MILLI_AMPER=0 +USBX.USBD_CDCACM_EPINCMD_ADDR=2 +USBX.USBD_CDCACM_EPIN_ADDR=1 +USBX.USBD_CDCACM_EPIN_HS_MPS=512 +USBX.USBD_CDCACM_EPOUT_HS_MPS=512 +USBX.USBD_PID=22336 +USBX.USBD_PRODUCT_STRING=STM32 Virtual ComPort +USBX.USBD_SERIAL_NUMBER=CDC_ACM001 +USBX.USBX_DEVICE_SYS_SIZE=4*1024 +USBX.UX_DEVICE_APP_MEM_POOL_SIZE=8192 +USBX.UX_DEVICE_CDC_ACM=1 +USBX.UX_Device_Controller=1 +USBX.UX_Device_CoreStack=1 +USBX.UX_SLAVE_REQUEST_CONTROL_MAX_LENGTH=256 +USBX.UX_SLAVE_REQUEST_DATA_MAX_LENGTH=512 +USBX0.BSP.STBoard=false +USBX0.BSP.api=Unknown +USBX0.BSP.component= +USBX0.BSP.condition= +USBX0.BSP.instance=USB_OTG_HS +USBX0.BSP.ip=USB_OTG_HS +USBX0.BSP.mode=Device_Only +USBX0.BSP.name=USBDevice +USBX0.BSP.semaphore= +USBX0.BSP.solution=USB_OTG_HS +USB_OTG_HS.IPParameters=VirtualMode +USB_OTG_HS.VirtualMode=Device_HS +VP_GPDMA1_VS_GPDMACH0.Mode=SIMPLEREQUEST_GPDMACH0 +VP_GPDMA1_VS_GPDMACH0.Signal=GPDMA1_VS_GPDMACH0 +VP_GPDMA1_VS_GPDMACH3.Mode=SIMPLEREQUEST_GPDMACH3 +VP_GPDMA1_VS_GPDMACH3.Signal=GPDMA1_VS_GPDMACH3 +VP_GPDMA1_VS_GPDMACH5.Mode=SIMPLEREQUEST_GPDMACH5 +VP_GPDMA1_VS_GPDMACH5.Signal=GPDMA1_VS_GPDMACH5 +VP_ICACHE_VS_ICACHE.Mode=DirectMappedCache +VP_ICACHE_VS_ICACHE.Signal=ICACHE_VS_ICACHE +VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg +VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP +VP_PWR_VS_DBSignals.Mode=DisableDeadBatterySignals +VP_PWR_VS_DBSignals.Signal=PWR_VS_DBSignals +VP_PWR_VS_LPOM.Mode=PowerOptimisation +VP_PWR_VS_LPOM.Signal=PWR_VS_LPOM +VP_PWR_VS_SECSignals.Mode=Security/Privilege +VP_PWR_VS_SECSignals.Signal=PWR_VS_SECSignals +VP_SYS_VS_tim6.Mode=TIM6 +VP_SYS_VS_tim6.Signal=SYS_VS_tim6 +VP_THREADX_VS_RTOSJjThreadXJjCoreJjDefault.Mode=Core_Default +VP_THREADX_VS_RTOSJjThreadXJjCoreJjDefault.Signal=THREADX_VS_RTOSJjThreadXJjCoreJjDefault +VP_USBPD_VS_PD3TYPEC.Mode=PD3_TypeC +VP_USBPD_VS_PD3TYPEC.Signal=USBPD_VS_PD3TYPEC +VP_USBPD_VS_USBPD1.Mode=USBPD_P0 +VP_USBPD_VS_USBPD1.Signal=USBPD_VS_USBPD1 +VP_USBPD_VS_usbpd_tim2.Mode=TIM2 +VP_USBPD_VS_usbpd_tim2.Signal=USBPD_VS_usbpd_tim2 +VP_USBPD_VS_usbpd_usb_cohabitation.Mode=Enable USB Support +VP_USBPD_VS_usbpd_usb_cohabitation.Signal=USBPD_VS_usbpd_usb_cohabitation +VP_USBX_Core_System.Mode=Core_System +VP_USBX_Core_System.Signal=USBX_Core_System +VP_USBX_UX\ Device\ CDC\ ACM\ Class_HS.Mode=UX_Device_class_CDC_ACM_HS +VP_USBX_UX\ Device\ CDC\ ACM\ Class_HS.Signal=USBX_UX Device CDC ACM Class_HS +VP_USBX_UX\ Device\ Controller_HS.Mode=UX_Device_Controller_HS +VP_USBX_UX\ Device\ Controller_HS.Signal=USBX_UX Device Controller_HS +VP_USBX_UX\ Device\ CoreStack_HS.Mode=UX_Device_CoreStack_HS +VP_USBX_UX\ Device\ CoreStack_HS.Signal=USBX_UX Device CoreStack_HS +board=NUCLEO-U5A5ZJ-Q +boardIOC=true diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index ab4194623..16a86cbbb 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -37,6 +37,9 @@ #pragma GCC diagnostic pop #endif +static void Error_Handler(void) { +} + #include "bsp/board_api.h" #include "board.h" @@ -47,6 +50,10 @@ void OTG_FS_IRQHandler(void) { tud_int_handler(0); } +void OTG_HS_IRQHandler(void) { + tud_int_handler(0); +} + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -54,8 +61,9 @@ void OTG_FS_IRQHandler(void) { UART_HandleTypeDef UartHandle; void board_init(void) { - - board_clock_init(); + // Init clock, implemented in board.h + SystemClock_Config(); + SystemPower_Config(); // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); @@ -75,9 +83,6 @@ void board_init(void) { #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif GPIO_InitTypeDef GPIO_InitStruct; @@ -135,7 +140,13 @@ void board_init(void) { GPIO_InitStruct.Alternate = GPIO_AF10_USB; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); -#if defined(OTG_FS_VBUS_SENSE) && OTG_FS_VBUS_SENSE +#ifdef USB_OTG_FS + #if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + #endif + + #if defined(OTG_FS_VBUS_SENSE) && OTG_FS_VBUS_SENSE // Configure VBUS Pin OTG_FS_VBUS_SENSE GPIO_InitStruct.Pin = GPIO_PIN_9; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; @@ -144,20 +155,44 @@ void board_init(void) { // Enable VBUS sense (B device) via pin PA9 USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else + #else // Disable VBUS sense (B device) via pin PA9 USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; // B-peripheral session valid override enable USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif // vbus sense + #endif // vbus sense /* Enable USB power on Pwrctrl CR2 register */ HAL_PWREx_EnableVddUSB(); - /* USB_OTG_FS clock enable */ + /* USB clock enable */ __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); +#else + // STM59x/Ax/Fx/Gx only have 1 USB HS port + + #if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + #endif + + + // Disable VBUS sense (B device) + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + /* USB clock enable */ + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); +#endif // USB_OTG_FS + + } //--------------------------------------------------------------------+ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 8807ff8aa..1797f0bc4 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -217,9 +217,7 @@ // TypeC controller #define TUP_USBIP_TYPEC_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_TYPEC_RHPORTS_NUM 1 #elif TU_CHECK_MCU(OPT_MCU_STM32G0) @@ -261,14 +259,21 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32U5) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 6 + + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY + #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ + defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 + #else + #define TUP_DCD_ENDPOINT_MAX 6 + #endif #elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 #define TUP_DCD_ENDPOINT_MAX 8 - //--------------------------------------------------------------------+ // Sony //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index aa77511fa..a97a10223 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -86,18 +86,16 @@ #include "stm32u5xx.h" // NOTE: STM595/5A5/599/5A9 only have 1 USB port (with integrated HS PHY) // USB_OTG_FS_BASE and OTG_FS_IRQn not defined - #if (! defined USB_OTG_FS) + #if !defined(USB_OTG_FS) #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 - #define USB_OTG_FS_PERIPH_BASE USB_OTG_HS_BASE - #define OTG_FS_IRQn OTG_HS_IRQn + //#define OTG_FS_IRQn OTG_HS_IRQn #else #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE + #define EP_MAX_FS 6 + #define EP_FIFO_SIZE_FS 1280 #endif - #define EP_MAX_FS 6 - #define EP_FIFO_SIZE_FS 1280 - #else #error "Unsupported MCUs" #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index a41f5a07e..a29eb8a3a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -174,10 +174,10 @@ // NXP LPC MCX #define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series -// Helper to check if configured MCU is one of listed +// Check if configured MCU is one of listed // Apply _TU_CHECK_MCU with || as separator to list of input -#define _TU_CHECK_MCU(_m) (CFG_TUSB_MCU == _m) -#define TU_CHECK_MCU(...) (TU_ARGS_APPLY(_TU_CHECK_MCU, ||, __VA_ARGS__)) +#define _TU_CHECK_MCU(_m) (CFG_TUSB_MCU == _m) +#define TU_CHECK_MCU(...) (TU_ARGS_APPLY(_TU_CHECK_MCU, ||, __VA_ARGS__)) //--------------------------------------------------------------------+ // Supported OS diff --git a/tools/get_deps.py b/tools/get_deps.py index 9fdefac9d..8f93ca61f 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -181,6 +181,10 @@ deps_all = {**deps_mandatory, **deps_optional} TOP = Path(__file__).parent.parent.resolve() +def run_cmd(cmd): + return subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + def get_a_dep(d): if d not in deps_all.keys(): print('{} is not found in dependency list') @@ -189,25 +193,24 @@ def get_a_dep(d): commit = deps_all[d][1] families = deps_all[d][2] - print('cloning {} with {}'.format(d, url)) + print(f'cloning {d} with {url}') p = Path(TOP / d) - git_cmd = "git -C {}".format(p) + git_cmd = f"git -C {p}" # Init git deps if not existed if not p.exists(): p.mkdir(parents=True) - subprocess.run("{} init".format(git_cmd), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - subprocess.run("{} remote add origin {}".format(git_cmd, url), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + run_cmd(f"git -C {p} init") + run_cmd(f"git -C {p} remote add origin {url}") # Check if commit is already fetched - result = subprocess.run("{} rev-parse HEAD".format(git_cmd, commit), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + result = run_cmd(f"git -C {p} rev-parse HEAD") head = result.stdout.decode("utf-8").splitlines()[0] - + run_cmd(f"git -C {p} reset --hard") if commit != head: - subprocess.run("{} reset --hard".format(git_cmd, commit), shell=True) - subprocess.run("{} fetch --depth 1 origin {}".format(git_cmd, commit), shell=True) - subprocess.run("{} checkout FETCH_HEAD".format(git_cmd), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + run_cmd(f"git -C {p} fetch --depth 1 origin {commit}") + run_cmd(f"git -C {p} checkout FETCH_HEAD") return 0 From d3fa3cdf487be5929240bc23f9d109c5e3e947bc Mon Sep 17 00:00:00 2001 From: Mengsk Date: Wed, 18 Oct 2023 17:05:35 +0200 Subject: [PATCH 21/82] Adjsut blackout time. --- examples/device/audio_4_channel_mic/src/tusb_config.h | 4 ++-- src/class/audio/audio_device.c | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index f86b63528..cf44918e2 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -126,12 +126,12 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 #define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value #define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ 4 * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) +#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ 4 * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Minimum 4*EP size is needed for flow control #else #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ 4 * CFG_TUD_AUDIO_EP_SZ_IN +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ 4 * CFG_TUD_AUDIO_EP_SZ_IN // Minimum 4*EP size is needed for flow control #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 9712afde9..9af999992 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -2645,11 +2645,11 @@ static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t da packet_size = norminal_size[2]; if(norminal_size[0] == norminal_size[1]) { - // nav = INT(nav) + 1 - ctrl_blackout = 2; + // nav > INT(nav), eg. 44.1k, 88.2k + ctrl_blackout = 0; } else { - // nav = INT(nav) + // nav = INT(nav), eg. 48k, 96k ctrl_blackout = 10; } } else From 2d802e03e9a86ff3306398f1db59b8218f625c7f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 24 Oct 2023 22:14:24 +0200 Subject: [PATCH 22/82] Update audio_4_channel_mic example for HS device. --- .../device/audio_4_channel_mic/src/main.c | 30 +++++++++++-------- .../audio_4_channel_mic/src/tusb_config.h | 4 +-- src/device/usbd.h | 6 ++-- 3 files changed, 22 insertions(+), 18 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 9c37315c8..1de4f9dac 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -71,10 +71,10 @@ audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range stat #if CFG_TUD_AUDIO_ENABLE_ENCODING // Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2 -uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ/2]; // Ensure half word aligned +uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #else // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 -uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_EP_SZ_IN]; // Ensure half word aligned +uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000]; #endif void led_blinking_task(void); @@ -185,8 +185,21 @@ void tud_resume_cb(void) void audio_task(void) { - // Yet to be filled - e.g. put meas data into TX FIFOs etc. - // asm("nop"); + // Yet to be filled - e.g. read audio from I2S buffer. + // Here we simulate a I2S receive callback every 1ms. + static uint32_t start_ms = 0; + uint32_t curr_ms = board_millis(); + if ( start_ms == curr_ms ) return; // not enough time + start_ms = curr_ms; +#if CFG_TUD_AUDIO_ENABLE_ENCODING + // Write I2S buffer into FIFO + for (uint8_t cnt=0; cnt < 2; cnt++) + { + tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); + } +#else + tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); +#endif } //--------------------------------------------------------------------+ @@ -453,15 +466,6 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u // tud_audio_write_support_ff(channel, data, samples * N_BYTES_PER_SAMPLE * N_CHANNEL_PER_FIFO); // } -#if CFG_TUD_AUDIO_ENABLE_ENCODING - // Write I2S buffer into FIFO - for (uint8_t cnt=0; cnt < 2; cnt++) - { - tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); - } -#else - tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); -#endif return true; } diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index cf44918e2..46484f847 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -126,12 +126,12 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 #define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value #define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ 4 * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Minimum 4*EP size is needed for flow control +#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device #else #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ 4 * CFG_TUD_AUDIO_EP_SZ_IN // Minimum 4*EP size is needed for flow control +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device #endif diff --git a/src/device/usbd.h b/src/device/usbd.h index 782f538fd..93a2033c4 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -465,7 +465,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) @@ -514,7 +514,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) @@ -562,7 +562,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ From 9cba9a753b2d8a8c06f1dacc5c16d656397f5d79 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Oct 2023 17:40:53 +0700 Subject: [PATCH 23/82] update s3 devkitm with max3421 pin following metro s3, check max3421 version to make sure it is valid --- .idea/cmake.xml | 2 +- hw/bsp/espressif/boards/espressif_s3_devkitm/board.h | 6 +++--- src/portable/analog/max3421/hcd_max3421.c | 5 +++-- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 88e0e27ad..9f17c805c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -16,7 +16,7 @@ - + diff --git a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h index 4b4151e72..a319fbc61 100644 --- a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h @@ -38,9 +38,9 @@ // SPI for USB host shield #define MAX3421_SPI_HOST SPI2_HOST -#define MAX3421_SCK_PIN 36 -#define MAX3421_MOSI_PIN 35 -#define MAX3421_MISO_PIN 37 +#define MAX3421_SCK_PIN 39 +#define MAX3421_MOSI_PIN 42 +#define MAX3421_MISO_PIN 21 #define MAX3421_CS_PIN 15 #define MAX3421_INTR_PIN 14 diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 787c1e511..4665c1b06 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -433,8 +433,9 @@ bool hcd_init(uint8_t rhport) { reg_write(rhport, PINCTL_ADDR, PINCTL_FDUPSPI, false); // V1 is 0x01, V2 is 0x12, V3 is 0x13 -// uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); -// TU_LOG2_HEX(revision); + uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); + TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); + TU_LOG2_HEX(revision); // reset reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); From ae7ad53949d0021a8d0a736b7b33f583ca0ee5b3 Mon Sep 17 00:00:00 2001 From: Yveaux Date: Sat, 28 Oct 2023 14:47:29 +0200 Subject: [PATCH 24/82] Add PlatformIO manifest --- library.json | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 library.json diff --git a/library.json b/library.json new file mode 100644 index 000000000..4b7266dec --- /dev/null +++ b/library.json @@ -0,0 +1,23 @@ +{ + "name": "TinyUSB", + "version": "0.15.0", + "description": "TinyUSB is an open-source cross-platform USB Host/Device stack for embedded system, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events are deferred then handled in the non-ISR task function.", + "keywords": "usb, host, device", + "repository": + { + "type": "git", + "url": "https://github.com/hathach/tinyusb.git" + }, + "authors": + [ + { + "name": "Ha Thach", + "email": "thach@tinyusb.org", + "maintainer": true + } + ], + "license": "MIT", + "homepage": "https://www.tinyusb.org/", + "frameworks": "*", + "platforms": "*" +} \ No newline at end of file From a4c542a7b4e753997864b129a4d5fd5b9b77f4e3 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 30 Oct 2023 22:21:58 +0700 Subject: [PATCH 25/82] addd dwc2_info.py/md update stm32u5a5 board clock & power configure, able to get passed otg clock reset --- hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 12 ++ hw/bsp/stm32u5/family.c | 11 +- src/portable/synopsys/dwc2/dwc2_info.md | 54 ++++++ src/portable/synopsys/dwc2/dwc2_info.py | 158 ++++++++++++++++++ src/portable/synopsys/dwc2/dwc2_stm32.h | 93 +++++------ src/portable/synopsys/dwc2/dwc2_type.h | 1 + 6 files changed, 277 insertions(+), 52 deletions(-) create mode 100644 src/portable/synopsys/dwc2/dwc2_info.md create mode 100644 src/portable/synopsys/dwc2/dwc2_info.py diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 37b008727..c4eb94dd8 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -99,6 +99,18 @@ static void SystemClock_Config(void) { RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + // USB Clock + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USBPHY; + PeriphClkInit.UsbPhyClockSelection = RCC_USBPHYCLKSOURCE_HSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } + + /** Set the OTG PHY reference clock selection + */ + HAL_SYSCFG_SetOTGPHYReferenceClockSelection(SYSCFG_OTG_HS_PHY_CLK_SELECT_1); } static void SystemPower_Config(void) { diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 16a86cbbb..3fbc50d93 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -177,7 +177,6 @@ void board_init(void) { NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - // Disable VBUS sense (B device) USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; @@ -185,11 +184,17 @@ void board_init(void) { USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + /* USB clock enable */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + __HAL_RCC_USBPHYC_CLK_ENABLE(); + /* Enable USB power on Pwrctrl CR2 register */ HAL_PWREx_EnableVddUSB(); + HAL_PWREx_EnableUSBHSTranceiverSupply(); - /* USB clock enable */ - __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + /*Configuring the SYSCFG registers OTG_HS PHY*/ + HAL_SYSCFG_EnableOTGPHY(SYSCFG_OTG_HS_PHY_ENABLE); #endif // USB_OTG_FS diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md new file mode 100644 index 000000000..2d8ab067f --- /dev/null +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -0,0 +1,54 @@ +| | BCM2711 (Pi4) | EFM32GG FullSpeed | ESP32-S2 | STM32F407 Fullspeed | STM32F407 Highspeed | STM32F411 Fullspeed | STM32F412 Fullspeed | STM32F723 Fullspeed | STM32F723 HighSpeed | STM32F767 Fullspeed | STM32H743 Highspeed | STM32L476 Fullspeed | STM32U5A5 Highspeed | GD32VF103 Fullspeed | XMC4500 | +|:----------------------------|:----------------|:--------------------|:-----------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:-----------| +| guid | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00001200 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002000 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | +| gsnpsid | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | +| ghwcfg1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| ghwcfg2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x229DCD20 | 0x229ED590 | 0x229DCD20 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229ED520 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | +| - op_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | +| - arch | 2 | 2 | 2 | 0 | 2 | 0 | 0 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | +| - point2point | 0 | 0 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | +| - hs_phy_type | 1 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 3 | 0 | 2 | 0 | 1 | 0 | 0 | +| - fs_phy_type | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - num_dev_ep | 7 | 6 | 6 | 3 | 5 | 3 | 5 | 5 | 8 | 5 | 8 | 5 | 8 | 0 | 6 | +| - num_host_ch | 7 | 13 | 7 | 7 | 11 | 7 | 11 | 11 | 15 | 11 | 15 | 11 | 15 | 0 | 13 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - mul_cpu_int | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nperiod_tx_q_depth | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - host_period_tx_q_depth | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - dev_token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| ghwcfg3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x020001E8 | 0x03F403E8 | 0x020001E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x0200D1E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | +| - xfer_size_width | 8 | 8 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | +| - packet_size_width | 6 | 6 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - i2c_enable | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - total_fifo_size | 4080 | 498 | 200 | 512 | 1012 | 512 | 512 | 512 | 1006 | 512 | 952 | 512 | 952 | 0 | 634 | +| ghwcfg4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0x0FF08030 | 0x17F00030 | 0x0FF08030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x17F08030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - power_optimized | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | 0 | 0 | +| - service_interval_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_en | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - reserved13 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - utmi_phy_data_width | 0 | 2 | 2 | 2 | 0 | 2 | 2 | 2 | 0 | 2 | 0 | 2 | 0 | 0 | 2 | +| - dev_ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - vbus_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - a_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - b_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - num_dev_in_eps | 15 | 13 | 9 | 7 | 11 | 7 | 11 | 11 | 1 | 11 | 1 | 11 | 1 | 0 | 13 | +| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py new file mode 100644 index 000000000..0af6c4c77 --- /dev/null +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -0,0 +1,158 @@ +import click +import ctypes +import pandas as pd + +# hex value for register: guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 +dwc2_reg_list = ['guid', 'gsnpsid', 'ghwcfg1', 'ghwcfg2', 'ghwcfg3', 'ghwcfg4'] +dwc2_reg_value = { + 'BCM2711 (Pi4)': [0x2708A000, 0x4F54280A, 0, 0x228DDD50, 0xFF000E8, 0x1FF00020], + 'EFM32GG FullSpeed': [0, 0x4F54330A, 0, 0x228F5910, 0x1F204E8, 0x1BF08030], + 'ESP32-S2': [0, 0x4F54400A, 0, 0x224DD930, 0xC804B5, 0xD3F0A030], + 'STM32F407 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], + 'STM32F407 Highspeed': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], + 'STM32F411 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], + 'STM32F412 Fullspeed': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32F723 Fullspeed': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32F723 HighSpeed': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x3EED2E8, 0x23F00030], + 'STM32F767 Fullspeed': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32H743 Highspeed': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x3B8D2E8, 0xE3F00030], # both HS cores + 'STM32L476 Fullspeed': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32U5A5 Highspeed': [0x00005000, 0x4F54411A, 0x00000000, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'GD32VF103 Fullspeed': [0x1000, 0, 0, 0, 0, 0], + 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x27A01E5, 0xDBF08030] +} + +# Combine dwc2_info with dwc2_reg_list +# dwc2_info = { +# 'BCM2711 (Pi4)': { +# 'guid': 0x2708A000, +# 'gsnpsid': 0x4F54280A, +# 'ghwcfg1': 0, +# 'ghwcfg2': 0x228DDD50, +# 'ghwcfg3': 0xFF000E8, +# 'ghwcfg4': 0x1FF00020 +# }, +dwc2_info = {key: {field: value for field, value in zip(dwc2_reg_list, values)} for key, values in dwc2_reg_value.items()} + +class GHWCFG2(ctypes.LittleEndianStructure): + _fields_ = [ + ("op_mode", ctypes.c_uint32, 3), + ("arch", ctypes.c_uint32, 2), + ("point2point", ctypes.c_uint32, 1), + ("hs_phy_type", ctypes.c_uint32, 2), + ("fs_phy_type", ctypes.c_uint32, 2), + ("num_dev_ep", ctypes.c_uint32, 4), + ("num_host_ch", ctypes.c_uint32, 4), + ("period_channel_support", ctypes.c_uint32, 1), + ("enable_dynamic_fifo", ctypes.c_uint32, 1), + ("mul_cpu_int", ctypes.c_uint32, 1), + ("reserved21", ctypes.c_uint32, 1), + ("nperiod_tx_q_depth", ctypes.c_uint32, 2), + ("host_period_tx_q_depth", ctypes.c_uint32, 2), + ("dev_token_q_depth", ctypes.c_uint32, 5), + ("otg_enable_ic_usb", ctypes.c_uint32, 1) + ] + + +class GHWCFG3(ctypes.LittleEndianStructure): + _fields_ = [ + ("xfer_size_width", ctypes.c_uint32, 4), + ("packet_size_width", ctypes.c_uint32, 3), + ("otg_enable", ctypes.c_uint32, 1), + ("i2c_enable", ctypes.c_uint32, 1), + ("vendor_ctrl_itf", ctypes.c_uint32, 1), + ("optional_feature_removed", ctypes.c_uint32, 1), + ("synch_reset", ctypes.c_uint32, 1), + ("otg_adp_support", ctypes.c_uint32, 1), + ("otg_enable_hsic", ctypes.c_uint32, 1), + ("battery_charger_support", ctypes.c_uint32, 1), + ("lpm_mode", ctypes.c_uint32, 1), + ("total_fifo_size", ctypes.c_uint32, 16) + ] + + +class GHWCFG4(ctypes.LittleEndianStructure): + _fields_ = [ + ("num_dev_period_in_ep", ctypes.c_uint32, 4), + ("power_optimized", ctypes.c_uint32, 1), + ("ahb_freq_min", ctypes.c_uint32, 1), + ("hibernation", ctypes.c_uint32, 1), + ("reserved7", ctypes.c_uint32, 3), + ("service_interval_mode", ctypes.c_uint32, 1), + ("ipg_isoc_en", ctypes.c_uint32, 1), + ("acg_enable", ctypes.c_uint32, 1), + ("reserved13", ctypes.c_uint32, 1), + ("utmi_phy_data_width", ctypes.c_uint32, 2), + ("dev_ctrl_ep_num", ctypes.c_uint32, 4), + ("iddg_filter_enabled", ctypes.c_uint32, 1), + ("vbus_valid_filter_enabled", ctypes.c_uint32, 1), + ("a_valid_filter_enabled", ctypes.c_uint32, 1), + ("b_valid_filter_enabled", ctypes.c_uint32, 1), + ("dedicated_fifos", ctypes.c_uint32, 1), + ("num_dev_in_eps", ctypes.c_uint32, 4), + ("dma_desc_enable", ctypes.c_uint32, 1), + ("dma_dynamic", ctypes.c_uint32, 1) + ] + + +@click.group() +def cli(): + pass + + +@cli.command() +@click.argument('mcus', nargs=-1) +@click.option('-a', '--all', is_flag=True, help='Print all bit-field values') +def info(mcus, all): + """Print DWC2 register values for given MCU(s)""" + if len(mcus) == 0: + mcus = dwc2_info + + for mcu in mcus: + for entry in dwc2_info: + if mcu.lower() in entry.lower(): + print(f"## {entry}") + for r_name, r_value in dwc2_info[entry].items(): + print(f"{r_name} = 0x{r_value:08X}") + # Print bit-field values + if all and r_name.upper() in globals(): + class_name = globals()[r_name.upper()] + ghwcfg = class_name.from_buffer_copy(r_value.to_bytes(4, byteorder='little')) + for field_name, field_type, _ in class_name._fields_: + print(f" {field_name} = {getattr(ghwcfg, field_name)}") + + +@cli.command() +def render_md(): + """Render dwc2_info to Markdown table""" + # Create an empty list to hold the dictionaries + dwc2_info_list = [] + + #Iterate over the dwc2_info dictionary and extract fields + for device, reg_values in dwc2_info.items(): + entry_dict = {"Device": device} + for r_name, r_value in reg_values.items(): + entry_dict[r_name] = f"0x{r_value:08X}" + # Print bit-field values + if r_name.upper() in globals(): + class_name = globals()[r_name.upper()] + ghwcfg = class_name.from_buffer_copy(r_value.to_bytes(4, byteorder='little')) + for field_name, field_type, _ in class_name._fields_: + entry_dict[f' - {field_name}'] = getattr(ghwcfg, field_name) + + dwc2_info_list.append(entry_dict) + + # Create a Pandas DataFrame from the list of dictionaries + df = pd.DataFrame(dwc2_info_list).set_index('Device') + + # Transpose the DataFrame to switch rows and columns + df = df.T + #print(df) + + # Write the Markdown table to a file + with open('dwc2_info.md', 'w') as md_file: + md_file.write(df.to_markdown()) + + +if __name__ == '__main__': + cli() diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index a97a10223..57df4e941 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -28,7 +28,7 @@ #define _DWC2_STM32_H_ #ifdef __cplusplus - extern "C" { +extern "C" { #endif // EP_MAX : Max number of bi-directional endpoints including EP0 @@ -84,17 +84,15 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 #include "stm32u5xx.h" - // NOTE: STM595/5A5/599/5A9 only have 1 USB port (with integrated HS PHY) - // USB_OTG_FS_BASE and OTG_FS_IRQn not defined - #if !defined(USB_OTG_FS) + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY + #ifdef USB_OTG_FS + #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE + #define EP_MAX_FS 6 + #define EP_FIFO_SIZE_FS 1280 + #else #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 - //#define OTG_FS_IRQn OTG_HS_IRQn - #else - #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE - #define EP_MAX_FS 6 - #define EP_FIFO_SIZE_FS 1280 #endif #else #error "Unsupported MCUs" @@ -109,15 +107,14 @@ // On STM32 for consistency we associate // - Port0 to OTG_FS, and Port1 to OTG_HS -static const dwc2_controller_t _dwc2_controller[] = -{ -#ifdef USB_OTG_FS_PERIPH_BASE - { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = OTG_FS_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, -#endif +static const dwc2_controller_t _dwc2_controller[] = { + #ifdef USB_OTG_FS_PERIPH_BASE + { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = OTG_FS_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, + #endif -#ifdef USB_OTG_HS_PERIPH_BASE - { .reg_base = USB_OTG_HS_PERIPH_BASE, .irqnum = OTG_HS_IRQn, .ep_count = EP_MAX_HS, .ep_fifo_size = EP_FIFO_SIZE_HS }, -#endif + #ifdef USB_OTG_HS_PERIPH_BASE + { .reg_base = USB_OTG_HS_PERIPH_BASE, .irqnum = OTG_HS_IRQn, .ep_count = EP_MAX_HS, .ep_fifo_size = EP_FIFO_SIZE_HS }, + #endif }; //--------------------------------------------------------------------+ @@ -128,40 +125,33 @@ static const dwc2_controller_t _dwc2_controller[] = // extern uint32_t SystemCoreClock; TU_ATTR_ALWAYS_INLINE -static inline void dwc2_dcd_int_enable(uint8_t rhport) -{ - NVIC_EnableIRQ((IRQn_Type)_dwc2_controller[rhport].irqnum); +static inline void dwc2_dcd_int_enable(uint8_t rhport) { + NVIC_EnableIRQ((IRQn_Type) _dwc2_controller[rhport].irqnum); } TU_ATTR_ALWAYS_INLINE -static inline void dwc2_dcd_int_disable (uint8_t rhport) -{ - NVIC_DisableIRQ((IRQn_Type)_dwc2_controller[rhport].irqnum); +static inline void dwc2_dcd_int_disable(uint8_t rhport) { + NVIC_DisableIRQ((IRQn_Type) _dwc2_controller[rhport].irqnum); } TU_ATTR_ALWAYS_INLINE -static inline void dwc2_remote_wakeup_delay(void) -{ +static inline void dwc2_remote_wakeup_delay(void) { // try to delay for 1 ms uint32_t count = SystemCoreClock / 1000; - while ( count-- ) __NOP(); + while (count--) __NOP(); } // MCU specific PHY init, called BEFORE core reset -static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) -{ - if ( hs_phy_type == HS_PHY_TYPE_NONE ) - { +static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { + if (hs_phy_type == HS_PHY_TYPE_NONE) { // Enable on-chip FS PHY dwc2->stm32_gccfg |= STM32_GCCFG_PWRDWN; - }else - { - // Disable FS PHY + } else { + // Disable FS PHY, TODO on U5A5 (dwc2 4.11a) 16th bit is 'Host CDP behavior enable' dwc2->stm32_gccfg &= ~STM32_GCCFG_PWRDWN; // Enable on-chip HS PHY - if (hs_phy_type == HS_PHY_TYPE_UTMI || hs_phy_type == HS_PHY_TYPE_UTMI_ULPI) - { + if (hs_phy_type == HS_PHY_TYPE_UTMI || hs_phy_type == HS_PHY_TYPE_UTMI_ULPI) { #ifdef USB_HS_PHYC // Enable UTMI HS PHY dwc2->stm32_gccfg |= STM32_GCCFG_PHYHSEN; @@ -200,34 +190,39 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) } // MCU specific PHY update, it is called AFTER init() and core reset -static inline void dwc2_phy_update(dwc2_regs_t * dwc2, uint8_t hs_phy_type) -{ +static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { // used to set turnaround time for fullspeed, nothing to do in highspeed mode - if ( hs_phy_type == HS_PHY_TYPE_NONE ) - { + if (hs_phy_type == HS_PHY_TYPE_NONE) { // Turnaround timeout depends on the AHB clock dictated by STM32 Reference Manual uint32_t turnaround; - if ( SystemCoreClock >= 32000000u ) + if (SystemCoreClock >= 32000000u) { turnaround = 0x6u; - else if ( SystemCoreClock >= 27500000u ) + } else if (SystemCoreClock >= 27500000u) { turnaround = 0x7u; - else if ( SystemCoreClock >= 24000000u ) + } else if (SystemCoreClock >= 24000000u) { turnaround = 0x8u; - else if ( SystemCoreClock >= 21800000u ) + } else if (SystemCoreClock >= 21800000u) { turnaround = 0x9u; - else if ( SystemCoreClock >= 20000000u ) + } + else if (SystemCoreClock >= 20000000u) { turnaround = 0xAu; - else if ( SystemCoreClock >= 18500000u ) + } + else if (SystemCoreClock >= 18500000u) { turnaround = 0xBu; - else if ( SystemCoreClock >= 17200000u ) + } + else if (SystemCoreClock >= 17200000u) { turnaround = 0xCu; - else if ( SystemCoreClock >= 16000000u ) + } + else if (SystemCoreClock >= 16000000u) { turnaround = 0xDu; - else if ( SystemCoreClock >= 15000000u ) + } + else if (SystemCoreClock >= 15000000u) { turnaround = 0xEu; - else + } + else { turnaround = 0xFu; + } dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_TRDT_Msk) | (turnaround << GUSBCFG_TRDT_Pos); } diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 3fc979337..6516882da 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -43,6 +43,7 @@ typedef struct #define DWC2_CORE_REV_3_00a 0x4f54300a #define DWC2_CORE_REV_3_10a 0x4f54310a #define DWC2_CORE_REV_4_00a 0x4f54400a +#define DWC2_CORE_REV_4_11a 0x4f54411a #define DWC2_CORE_REV_4_20a 0x4f54420a #define DWC2_FS_IOT_REV_1_00a 0x5531100a #define DWC2_HS_IOT_REV_1_00a 0x5532100a From 305ef5d48a083f2052351a8a325310168c420c0e Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 30 Oct 2023 22:22:27 +0700 Subject: [PATCH 26/82] minor space format dwc2 driver --- src/portable/synopsys/dwc2/dcd_dwc2.c | 640 ++++++++++---------------- 1 file changed, 233 insertions(+), 407 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c6132a1f5..7b50a7d54 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -82,8 +82,8 @@ static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[2]; typedef struct { - uint8_t * buffer; - tu_fifo_t * ff; + uint8_t* buffer; + tu_fifo_t* ff; uint16_t total_len; uint16_t max_size; uint8_t interval; @@ -93,30 +93,27 @@ static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) // EP0 transfers are limited to 1 packet - larger sizes has to be split -static uint16_t ep0_pending[2]; // Index determines direction as tusb_dir_t type +static uint16_t ep0_pending[2]; // Index determines direction as tusb_dir_t type // TX FIFO RAM allocation so far in words - RX FIFO size is readily available from dwc2->grxfsiz -static uint16_t _allocated_fifo_words_tx; // TX FIFO size in words (IN EPs) -static bool _out_ep_closed; // Flag to check if RX FIFO size needs an update (reduce its size) +static uint16_t _allocated_fifo_words_tx; // TX FIFO size in words (IN EPs) +static bool _out_ep_closed; // Flag to check if RX FIFO size needs an update (reduce its size) // SOF enabling flag - required for SOF to not get disabled in ISR when SOF was enabled by static bool _sof_en; // Calculate the RX FIFO size according to recommendations from reference manual -static inline uint16_t calc_grxfsiz(uint16_t max_ep_size, uint8_t ep_count) -{ - return 15 + 2*(max_ep_size/4) + 2*ep_count; +static inline uint16_t calc_grxfsiz(uint16_t max_ep_size, uint8_t ep_count) { + return 15 + 2 * (max_ep_size / 4) + 2 * ep_count; } -static void update_grxfsiz(uint8_t rhport) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +static void update_grxfsiz(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; // Determine largest EP size for RX FIFO uint16_t max_epsize = 0; - for (uint8_t epnum = 0; epnum < ep_count; epnum++) - { + for (uint8_t epnum = 0; epnum < ep_count; epnum++) { max_epsize = tu_max16(max_epsize, xfer_status[epnum][TUSB_DIR_OUT].max_size); } @@ -125,9 +122,8 @@ static void update_grxfsiz(uint8_t rhport) } // Start of Bus Reset -static void bus_reset(uint8_t rhport) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +static void bus_reset(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; tu_memclr(xfer_status, sizeof(xfer_status)); @@ -139,15 +135,14 @@ static void bus_reset(uint8_t rhport) dwc2->dcfg &= ~DCFG_DAD_Msk; // 1. NAK for all OUT endpoints - for ( uint8_t n = 0; n < ep_count; n++ ) - { + for (uint8_t n = 0; n < ep_count; n++) { dwc2->epout[n].doepctl |= DOEPCTL_SNAK; } // 2. Set up interrupt mask dwc2->daintmsk = TU_BIT(DAINTMSK_OEPM_Pos) | TU_BIT(DAINTMSK_IEPM_Pos); - dwc2->doepmsk = DOEPMSK_STUPM | DOEPMSK_XFRCM; - dwc2->diepmsk = DIEPMSK_TOM | DIEPMSK_XFRCM; + dwc2->doepmsk = DOEPMSK_STUPM | DOEPMSK_XFRCM; + dwc2->diepmsk = DIEPMSK_TOM | DIEPMSK_XFRCM; // "USB Data FIFOs" section in reference manual // Peripheral FIFO architecture @@ -206,36 +201,34 @@ static void bus_reset(uint8_t rhport) _allocated_fifo_words_tx = 16; // Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word ) - dwc2->dieptxf0 = (16 << DIEPTXF0_TX0FD_Pos) | (_dwc2_controller[rhport].ep_fifo_size/4 - _allocated_fifo_words_tx); + dwc2->dieptxf0 = (16 << DIEPTXF0_TX0FD_Pos) | (_dwc2_controller[rhport].ep_fifo_size / 4 - _allocated_fifo_words_tx); // Fixed control EP0 size to 64 bytes dwc2->epin[0].diepctl &= ~(0x03 << DIEPCTL_MPSIZ_Pos); xfer_status[0][TUSB_DIR_OUT].max_size = 64; - xfer_status[0][TUSB_DIR_IN ].max_size = 64; + xfer_status[0][TUSB_DIR_IN].max_size = 64; dwc2->epout[0].doeptsiz |= (3 << DOEPTSIZ_STUPCNT_Pos); dwc2->gintmsk |= GINTMSK_OEPINT | GINTMSK_IEPINT; } -static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t const dir, uint16_t const num_packets, uint16_t total_bytes) -{ +static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t const dir, uint16_t const num_packets, + uint16_t total_bytes) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); // EP0 is limited to one packet each xfer // We use multiple transaction of xfer->max_size length to get a whole transfer done - if ( epnum == 0 ) - { - xfer_ctl_t *const xfer = XFER_CTL_BASE(epnum, dir); + if (epnum == 0) { + xfer_ctl_t* const xfer = XFER_CTL_BASE(epnum, dir); total_bytes = tu_min16(ep0_pending[dir], xfer->max_size); ep0_pending[dir] -= total_bytes; } // IN and OUT endpoint xfers are interrupt-driven, we just schedule them here. - if ( dir == TUSB_DIR_IN ) - { + if (dir == TUSB_DIR_IN) { dwc2_epin_t* epin = dwc2->epin; // A full IN transfer (multiple packets, possibly) triggers XFRC. @@ -245,20 +238,16 @@ static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t c epin[epnum].diepctl |= DIEPCTL_EPENA | DIEPCTL_CNAK; // For ISO endpoint set correct odd/even bit for next frame. - if ( (epin[epnum].diepctl & DIEPCTL_EPTYP) == DIEPCTL_EPTYP_0 && (XFER_CTL_BASE(epnum, dir))->interval == 1 ) - { + if ((epin[epnum].diepctl & DIEPCTL_EPTYP) == DIEPCTL_EPTYP_0 && (XFER_CTL_BASE(epnum, dir))->interval == 1) { // Take odd/even bit from frame counter. uint32_t const odd_frame_now = (dwc2->dsts & (1u << DSTS_FNSOF_Pos)); epin[epnum].diepctl |= (odd_frame_now ? DIEPCTL_SD0PID_SEVNFRM_Msk : DIEPCTL_SODDFRM_Msk); } // Enable fifo empty interrupt only if there are something to put in the fifo. - if ( total_bytes != 0 ) - { + if (total_bytes != 0) { dwc2->diepempmsk |= (1 << epnum); } - } - else - { + } else { dwc2_epout_t* epout = dwc2->epout; // A full OUT transfer (multiple packets, possibly) triggers XFRC. @@ -267,9 +256,8 @@ static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t c ((total_bytes << DOEPTSIZ_XFRSIZ_Pos) & DOEPTSIZ_XFRSIZ_Msk); epout[epnum].doepctl |= DOEPCTL_EPENA | DOEPCTL_CNAK; - if ( (epout[epnum].doepctl & DOEPCTL_EPTYP) == DOEPCTL_EPTYP_0 && - XFER_CTL_BASE(epnum, dir)->interval == 1 ) - { + if ((epout[epnum].doepctl & DOEPCTL_EPTYP) == DOEPCTL_EPTYP_0 && + XFER_CTL_BASE(epnum, dir)->interval == 1) { // Take odd/even bit from frame counter. uint32_t const odd_frame_now = (dwc2->dsts & (1u << DSTS_FNSOF_Pos)); epout[epnum].doepctl |= (odd_frame_now ? DOEPCTL_SD0PID_SEVNFRM_Msk : DOEPCTL_SODDFRM_Msk); @@ -281,93 +269,35 @@ static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t c /* Controller API *------------------------------------------------------------------*/ #if CFG_TUSB_DEBUG >= DWC2_DEBUG -void print_dwc2_info(dwc2_regs_t * dwc2) -{ - dwc2_ghwcfg2_t const * hw_cfg2 = &dwc2->ghwcfg2_bm; - dwc2_ghwcfg3_t const * hw_cfg3 = &dwc2->ghwcfg3_bm; - dwc2_ghwcfg4_t const * hw_cfg4 = &dwc2->ghwcfg4_bm; -// TU_LOG_HEX(DWC2_DEBUG, dwc2->gotgctl); -// TU_LOG_HEX(DWC2_DEBUG, dwc2->gusbcfg); -// TU_LOG_HEX(DWC2_DEBUG, dwc2->dcfg); - TU_LOG_HEX(DWC2_DEBUG, dwc2->guid); - TU_LOG_HEX(DWC2_DEBUG, dwc2->gsnpsid); - TU_LOG_HEX(DWC2_DEBUG, dwc2->ghwcfg1); - - // HW configure 2 - TU_LOG(DWC2_DEBUG, "\r\n"); - TU_LOG_HEX(DWC2_DEBUG, dwc2->ghwcfg2); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->op_mode ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->arch ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->point2point ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->hs_phy_type ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->fs_phy_type ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->num_dev_ep ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->num_host_ch ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->period_channel_support ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->enable_dynamic_fifo ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->mul_cpu_int ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->nperiod_tx_q_depth ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->host_period_tx_q_depth ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->dev_token_q_depth ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg2->otg_enable_ic_usb ); - - // HW configure 3 - TU_LOG(DWC2_DEBUG, "\r\n"); - TU_LOG_HEX(DWC2_DEBUG, dwc2->ghwcfg3); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->xfer_size_width ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->packet_size_width ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->otg_enable ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->i2c_enable ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->vendor_ctrl_itf ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->optional_feature_removed ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->synch_reset ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->otg_adp_support ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->otg_enable_hsic ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->battery_charger_support ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->lpm_mode ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg3->total_fifo_size ); - - // HW configure 4 - TU_LOG(DWC2_DEBUG, "\r\n"); - TU_LOG_HEX(DWC2_DEBUG, dwc2->ghwcfg4); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->num_dev_period_in_ep ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->power_optimized ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->ahb_freq_min ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->hibernation ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->service_interval_mode ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->ipg_isoc_en ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->acg_enable ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->utmi_phy_data_width ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->dev_ctrl_ep_num ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->iddg_filter_enabled ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->vbus_valid_filter_enabled ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->a_valid_filter_enabled ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->b_valid_filter_enabled ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->dedicated_fifos ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->num_dev_in_eps ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->dma_desc_enable ); - TU_LOG_INT(DWC2_DEBUG, hw_cfg4->dma_dynamic ); +void print_dwc2_info(dwc2_regs_t* dwc2) { + // print guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 + // use dwc2_info.py/md for bit-field value and comparison with other ports + volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; + TU_LOG(DWC2_DEBUG, "guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); + for (size_t i = 0; i < 5; i++) { + TU_LOG(DWC2_DEBUG, "0x%08lX, ", p[i]); + } + TU_LOG(DWC2_DEBUG, "0x%08lX\r\n", p[5]); } + #endif -static void reset_core(dwc2_regs_t * dwc2) -{ +static void reset_core(dwc2_regs_t* dwc2) { // reset core dwc2->grstctl |= GRSTCTL_CSRST; // wait for reset bit is cleared // TODO version 4.20a should wait for RESET DONE mask - while (dwc2->grstctl & GRSTCTL_CSRST) { } + while (dwc2->grstctl & GRSTCTL_CSRST) {} // wait for AHB master IDLE - while ( !(dwc2->grstctl & GRSTCTL_AHBIDL) ) { } + while (!(dwc2->grstctl & GRSTCTL_AHBIDL)) {} // wait for device mode ? } -static bool phy_hs_supported(dwc2_regs_t * dwc2) -{ +static bool phy_hs_supported(dwc2_regs_t* dwc2) { // note: esp32 incorrect report its hs_phy_type as utmi #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) return false; @@ -376,8 +306,7 @@ static bool phy_hs_supported(dwc2_regs_t * dwc2) #endif } -static void phy_fs_init(dwc2_regs_t * dwc2) -{ +static void phy_fs_init(dwc2_regs_t* dwc2) { TU_LOG(DWC2_DEBUG, "Fullspeed PHY init\r\n"); // Select FS PHY @@ -401,15 +330,13 @@ static void phy_fs_init(dwc2_regs_t * dwc2) dwc2->dcfg = (dwc2->dcfg & ~DCFG_DSPD_Msk) | (DCFG_DSPD_FS << DCFG_DSPD_Pos); } -static void phy_hs_init(dwc2_regs_t * dwc2) -{ +static void phy_hs_init(dwc2_regs_t* dwc2) { uint32_t gusbcfg = dwc2->gusbcfg; // De-select FS PHY gusbcfg &= ~GUSBCFG_PHYSEL; - if (dwc2->ghwcfg2_bm.hs_phy_type == HS_PHY_TYPE_ULPI) - { + if (dwc2->ghwcfg2_bm.hs_phy_type == HS_PHY_TYPE_ULPI) { TU_LOG(DWC2_DEBUG, "Highspeed ULPI PHY init\r\n"); // Select ULPI @@ -423,8 +350,7 @@ static void phy_hs_init(dwc2_regs_t * dwc2) // Disable FS/LS ULPI gusbcfg &= ~(GUSBCFG_ULPIFSLS | GUSBCFG_ULPICSM); - }else - { + } else { TU_LOG(DWC2_DEBUG, "Highspeed UTMI+ PHY init\r\n"); // Select UTMI+ with 8-bit interface @@ -465,8 +391,7 @@ static void phy_hs_init(dwc2_regs_t * dwc2) dwc2->dcfg = dcfg; } -static bool check_dwc2(dwc2_regs_t * dwc2) -{ +static bool check_dwc2(dwc2_regs_t* dwc2) { #if CFG_TUSB_DEBUG >= DWC2_DEBUG print_dwc2_info(dwc2); #endif @@ -481,41 +406,35 @@ static bool check_dwc2(dwc2_regs_t * dwc2) return true; } -void dcd_init (uint8_t rhport) -{ +void dcd_init(uint8_t rhport) { // Programming model begins in the last section of the chapter on the USB // peripheral in each Reference Manual. - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Check Synopsys ID register, failed if controller clock/power is not enabled - TU_VERIFY(check_dwc2(dwc2), ); - + if (!check_dwc2(dwc2)) return; dcd_disconnect(rhport); // max number of endpoints & total_fifo_size are: // hw_cfg2->num_dev_ep, hw_cfg2->total_fifo_size - if( phy_hs_supported(dwc2) ) - { - // Highspeed - phy_hs_init(dwc2); - }else - { - // core does not support highspeed or hs-phy is not present - phy_fs_init(dwc2); + if (phy_hs_supported(dwc2)) { + phy_hs_init(dwc2); // Highspeed + } else { + phy_fs_init(dwc2); // core does not support highspeed or hs phy is not present } // Restart PHY clock dwc2->pcgctl &= ~(PCGCTL_STOPPCLK | PCGCTL_GATEHCLK | PCGCTL_PWRCLMP | PCGCTL_RSTPDWNMODULE); - /* Set HS/FS Timeout Calibration to 7 (max available value). - * The number of PHY clocks that the application programs in - * this field is added to the high/full speed interpacket timeout - * duration in the core to account for any additional delays - * introduced by the PHY. This can be required, because the delay - * introduced by the PHY in generating the linestate condition - * can vary from one PHY to another. - */ + /* Set HS/FS Timeout Calibration to 7 (max available value). + * The number of PHY clocks that the application programs in + * this field is added to the high/full speed interpacket timeout + * duration in the core to account for any additional delays + * introduced by the PHY. This can be required, because the delay + * introduced by the PHY in generating the linestate condition + * can vary from one PHY to another. + */ dwc2->gusbcfg |= (7ul << GUSBCFG_TOCAL_Pos); // Force device mode @@ -537,7 +456,7 @@ void dcd_init (uint8_t rhport) // Required as part of core initialization. // TODO: How should mode mismatch be handled? It will cause // the core to stop working/require reset. - dwc2->gintmsk = GINTMSK_OTGINT | GINTMSK_MMISM | GINTMSK_RXFLVLM | + dwc2->gintmsk = GINTMSK_OTGINT | GINTMSK_MMISM | GINTMSK_RXFLVLM | GINTMSK_USBSUSPM | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; // Enable global interrupt @@ -554,30 +473,26 @@ void dcd_init (uint8_t rhport) dcd_connect(rhport); } -void dcd_int_enable (uint8_t rhport) -{ +void dcd_int_enable(uint8_t rhport) { dwc2_dcd_int_enable(rhport); } -void dcd_int_disable (uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { dwc2_dcd_int_disable(rhport); } -void dcd_set_address (uint8_t rhport, uint8_t dev_addr) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); dwc2->dcfg = (dwc2->dcfg & ~DCFG_DAD_Msk) | (dev_addr << DCFG_DAD_Pos); // Response with status after changing device address dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); } -void dcd_remote_wakeup(uint8_t rhport) -{ +void dcd_remote_wakeup(uint8_t rhport) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); // set remote wakeup dwc2->dctl |= DCTL_RWUSIG; @@ -592,35 +507,29 @@ void dcd_remote_wakeup(uint8_t rhport) dwc2->dctl &= ~DCTL_RWUSIG; } -void dcd_connect(uint8_t rhport) -{ +void dcd_connect(uint8_t rhport) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); dwc2->dctl &= ~DCTL_SDIS; } -void dcd_disconnect(uint8_t rhport) -{ +void dcd_disconnect(uint8_t rhport) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); dwc2->dctl |= DCTL_SDIS; } // Be advised: audio, video and possibly other iso-ep classes use dcd_sof_enable() to enable/disable its corresponding ISR on purpose! -void dcd_sof_enable(uint8_t rhport, bool en) -{ +void dcd_sof_enable(uint8_t rhport, bool en) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); _sof_en = en; - if (en) - { + if (en) { dwc2->gintsts = GINTSTS_SOF; dwc2->gintmsk |= GINTMSK_SOFM; - } - else - { + } else { dwc2->gintmsk &= ~GINTMSK_SOFM; } } @@ -629,33 +538,30 @@ void dcd_sof_enable(uint8_t rhport, bool en) /* DCD Endpoint port *------------------------------------------------------------------*/ -bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) -{ +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_edpt) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); TU_ASSERT(epnum < ep_count); - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); xfer->max_size = tu_edpt_packet_size(desc_edpt); xfer->interval = desc_edpt->bInterval; uint16_t const fifo_size = tu_div_ceil(xfer->max_size, 4); - if(dir == TUSB_DIR_OUT) - { + if (dir == TUSB_DIR_OUT) { // Calculate required size of RX FIFO - uint16_t const sz = calc_grxfsiz(4*fifo_size, ep_count); + uint16_t const sz = calc_grxfsiz(4 * fifo_size, ep_count); // If size_rx needs to be extended check if possible and if so enlarge it - if (dwc2->grxfsiz < sz) - { - TU_ASSERT(sz + _allocated_fifo_words_tx <= _dwc2_controller[rhport].ep_fifo_size/4); + if (dwc2->grxfsiz < sz) { + TU_ASSERT(sz + _allocated_fifo_words_tx <= _dwc2_controller[rhport].ep_fifo_size / 4); // Enlarge RX FIFO dwc2->grxfsiz = sz; @@ -667,9 +573,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) (xfer->max_size << DOEPCTL_MPSIZ_Pos); dwc2->daintmsk |= TU_BIT(DAINTMSK_OEPM_Pos + epnum); - } - else - { + } else { // "USB Data FIFOs" section in reference manual // Peripheral FIFO architecture // @@ -692,15 +596,17 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) // - IN EP 1 gets FIFO 1, IN EP "n" gets FIFO "n". // Check if free space is available - TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size/4); + TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size / 4); _allocated_fifo_words_tx += fifo_size; - TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %lu", fifo_size*4, _dwc2_controller[rhport].ep_fifo_size-_allocated_fifo_words_tx*4); + TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %lu", fifo_size * 4, + _dwc2_controller[rhport].ep_fifo_size - _allocated_fifo_words_tx * 4); // DIEPTXF starts at FIFO #1. // Both TXFD and TXSA are in unit of 32-bit words. - dwc2->dieptxf[epnum - 1] = (fifo_size << DIEPTXF_INEPTXFD_Pos) | (_dwc2_controller[rhport].ep_fifo_size/4 - _allocated_fifo_words_tx); + dwc2->dieptxf[epnum - 1] = (fifo_size << DIEPTXF_INEPTXFD_Pos) | + (_dwc2_controller[rhport].ep_fifo_size / 4 - _allocated_fifo_words_tx); dwc2->epin[epnum].diepctl |= (1 << DIEPCTL_USBAEP_Pos) | (epnum << DIEPCTL_TXFNUM_Pos) | @@ -715,16 +621,14 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) } // Close all non-control endpoints, cancel all pending transfers if any. -void dcd_edpt_close_all (uint8_t rhport) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +void dcd_edpt_close_all(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; // Disable non-control interrupt dwc2->daintmsk = (1 << DAINTMSK_OEPM_Pos) | (1 << DAINTMSK_IEPM_Pos); - for(uint8_t n = 1; n < ep_count; n++) - { + for (uint8_t n = 1; n < ep_count; n++) { // disable OUT endpoint dwc2->epout[n].doepctl = 0; xfer_status[n][TUSB_DIR_OUT].max_size = 0; @@ -738,31 +642,27 @@ void dcd_edpt_close_all (uint8_t rhport) _allocated_fifo_words_tx = 16; } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); - xfer->buffer = buffer; - xfer->ff = NULL; - xfer->total_len = total_bytes; + xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); + xfer->buffer = buffer; + xfer->ff = NULL; + xfer->total_len = total_bytes; // EP0 can only handle one packet - if(epnum == 0) - { + if (epnum == 0) { ep0_pending[dir] = total_bytes; // Schedule the first transaction for EP0 transfer edpt_schedule_packets(rhport, epnum, dir, 1, ep0_pending[dir]); - } - else - { + } else { uint16_t num_packets = (total_bytes / xfer->max_size); uint16_t const short_packet_size = total_bytes % xfer->max_size; // Zero-size packet is special case. - if ( (short_packet_size > 0) || (total_bytes == 0) ) num_packets++; + if ((short_packet_size > 0) || (total_bytes == 0)) num_packets++; // Schedule packets to be sent within interrupt edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes); @@ -775,24 +675,23 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // bytes should be written and second to keep the return value free to give back a boolean // success message. If total_bytes is too big, the FIFO will copy only what is available // into the USB buffer! -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) -{ +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes) { // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 TU_ASSERT(ff->item_size == 1); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); - xfer->buffer = NULL; - xfer->ff = ff; - xfer->total_len = total_bytes; + xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); + xfer->buffer = NULL; + xfer->ff = ff; + xfer->total_len = total_bytes; uint16_t num_packets = (total_bytes / xfer->max_size); uint16_t const short_packet_size = total_bytes % xfer->max_size; // Zero-size packet is special case. - if ( short_packet_size > 0 || (total_bytes == 0) ) num_packets++; + if (short_packet_size > 0 || (total_bytes == 0)) num_packets++; // Schedule packets to be sent within interrupt edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes); @@ -800,62 +699,52 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 return true; } -static void dcd_edpt_disable (uint8_t rhport, uint8_t ep_addr, bool stall) -{ +static void dcd_edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { (void) rhport; - dwc2_regs_t *dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if ( dir == TUSB_DIR_IN ) - { + if (dir == TUSB_DIR_IN) { dwc2_epin_t* epin = dwc2->epin; // Only disable currently enabled non-control endpoint - if ( (epnum == 0) || !(epin[epnum].diepctl & DIEPCTL_EPENA) ) - { + if ((epnum == 0) || !(epin[epnum].diepctl & DIEPCTL_EPENA)) { epin[epnum].diepctl |= DIEPCTL_SNAK | (stall ? DIEPCTL_STALL : 0); - } - else - { + } else { // Stop transmitting packets and NAK IN xfers. epin[epnum].diepctl |= DIEPCTL_SNAK; - while ( (epin[epnum].diepint & DIEPINT_INEPNE) == 0 ) {} + while ((epin[epnum].diepint & DIEPINT_INEPNE) == 0) {} // Disable the endpoint. epin[epnum].diepctl |= DIEPCTL_EPDIS | (stall ? DIEPCTL_STALL : 0); - while ( (epin[epnum].diepint & DIEPINT_EPDISD_Msk) == 0 ) {} + while ((epin[epnum].diepint & DIEPINT_EPDISD_Msk) == 0) {} epin[epnum].diepint = DIEPINT_EPDISD; } // Flush the FIFO, and wait until we have confirmed it cleared. dwc2->grstctl = ((epnum << GRSTCTL_TXFNUM_Pos) | GRSTCTL_TXFFLSH); - while ( (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) != 0 ) {} - } - else - { + while ((dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) != 0) {} + } else { dwc2_epout_t* epout = dwc2->epout; // Only disable currently enabled non-control endpoint - if ( (epnum == 0) || !(epout[epnum].doepctl & DOEPCTL_EPENA) ) - { + if ((epnum == 0) || !(epout[epnum].doepctl & DOEPCTL_EPENA)) { epout[epnum].doepctl |= stall ? DOEPCTL_STALL : 0; - } - else - { + } else { // Asserting GONAK is required to STALL an OUT endpoint. // Simpler to use polling here, we don't use the "B"OUTNAKEFF interrupt // anyway, and it can't be cleared by user code. If this while loop never // finishes, we have bigger problems than just the stack. dwc2->dctl |= DCTL_SGONAK; - while ( (dwc2->gintsts & GINTSTS_BOUTNAKEFF_Msk) == 0 ) {} + while ((dwc2->gintsts & GINTSTS_BOUTNAKEFF_Msk) == 0) {} // Ditto here- disable the endpoint. epout[epnum].doepctl |= DOEPCTL_EPDIS | (stall ? DOEPCTL_STALL : 0); - while ( (epout[epnum].doepint & DOEPINT_EPDISD_Msk) == 0 ) {} + while ((epout[epnum].doepint & DOEPINT_EPDISD_Msk) == 0) {} epout[epnum].doepint = DOEPINT_EPDISD; @@ -868,55 +757,46 @@ static void dcd_edpt_disable (uint8_t rhport, uint8_t ep_addr, bool stall) /** * Close an endpoint. */ -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); dcd_edpt_disable(rhport, ep_addr, false); // Update max_size xfer_status[epnum][dir].max_size = 0; // max_size = 0 marks a disabled EP - required for changing FIFO allocation - if (dir == TUSB_DIR_IN) - { + if (dir == TUSB_DIR_IN) { uint16_t const fifo_size = (dwc2->dieptxf[epnum - 1] & DIEPTXF_INEPTXFD_Msk) >> DIEPTXF_INEPTXFD_Pos; uint16_t const fifo_start = (dwc2->dieptxf[epnum - 1] & DIEPTXF_INEPTXSA_Msk) >> DIEPTXF_INEPTXSA_Pos; // For now only the last opened endpoint can be closed without fuss. - TU_ASSERT(fifo_start == _dwc2_controller[rhport].ep_fifo_size/4 - _allocated_fifo_words_tx,); + TU_ASSERT(fifo_start == _dwc2_controller[rhport].ep_fifo_size / 4 - _allocated_fifo_words_tx,); _allocated_fifo_words_tx -= fifo_size; - } - else - { + } else { _out_ep_closed = true; // Set flag such that RX FIFO gets reduced in size once RX FIFO is empty } } -void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { dcd_edpt_disable(rhport, ep_addr, true); } -void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); // Clear stall and reset data toggle - if ( dir == TUSB_DIR_IN ) - { + if (dir == TUSB_DIR_IN) { dwc2->epin[epnum].diepctl &= ~DIEPCTL_STALL; dwc2->epin[epnum].diepctl |= DIEPCTL_SD0PID_SEVNFRM; - } - else - { + } else { dwc2->epout[epnum].doepctl &= ~DOEPCTL_STALL; dwc2->epout[epnum].doepctl |= DOEPCTL_SD0PID_SEVNFRM; } @@ -925,70 +805,63 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) /*------------------------------------------------------------------*/ // Read a single data packet from receive FIFO -static void read_fifo_packet(uint8_t rhport, uint8_t * dst, uint16_t len) -{ +static void read_fifo_packet(uint8_t rhport, uint8_t* dst, uint16_t len) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); - volatile const uint32_t * rx_fifo = dwc2->fifo[0]; + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + volatile const uint32_t* rx_fifo = dwc2->fifo[0]; // Reading full available 32 bit words from fifo uint16_t full_words = len >> 2; - while(full_words--) - { + while (full_words--) { tu_unaligned_write32(dst, *rx_fifo); dst += 4; } // Read the remaining 1-3 bytes from fifo uint8_t const bytes_rem = len & 0x03; - if ( bytes_rem != 0 ) - { + if (bytes_rem != 0) { uint32_t const tmp = *rx_fifo; dst[0] = tu_u32_byte0(tmp); - if ( bytes_rem > 1 ) dst[1] = tu_u32_byte1(tmp); - if ( bytes_rem > 2 ) dst[2] = tu_u32_byte2(tmp); + if (bytes_rem > 1) dst[1] = tu_u32_byte1(tmp); + if (bytes_rem > 2) dst[2] = tu_u32_byte2(tmp); } } // Write a single data packet to EPIN FIFO -static void write_fifo_packet(uint8_t rhport, uint8_t fifo_num, uint8_t const * src, uint16_t len) -{ +static void write_fifo_packet(uint8_t rhport, uint8_t fifo_num, uint8_t const* src, uint16_t len) { (void) rhport; - dwc2_regs_t * dwc2 = DWC2_REG(rhport); - volatile uint32_t * tx_fifo = dwc2->fifo[fifo_num]; + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + volatile uint32_t* tx_fifo = dwc2->fifo[fifo_num]; // Pushing full available 32 bit words to fifo uint16_t full_words = len >> 2; - while(full_words--) - { + while (full_words--) { *tx_fifo = tu_unaligned_read32(src); src += 4; } // Write the remaining 1-3 bytes into fifo uint8_t const bytes_rem = len & 0x03; - if ( bytes_rem ) - { + if (bytes_rem) { uint32_t tmp_word = src[0]; - if ( bytes_rem > 1 ) tmp_word |= (src[1] << 8); - if ( bytes_rem > 2 ) tmp_word |= (src[2] << 16); + if (bytes_rem > 1) tmp_word |= (src[1] << 8); + if (bytes_rem > 2) tmp_word |= (src[2] << 16); *tx_fifo = tmp_word; } } -static void handle_rxflvl_irq(uint8_t rhport) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); - volatile uint32_t const * rx_fifo = dwc2->fifo[0]; +static void handle_rxflvl_irq(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + volatile uint32_t const* rx_fifo = dwc2->fifo[0]; // Pop control word off FIFO uint32_t const ctl_word = dwc2->grxstsp; - uint8_t const pktsts = (ctl_word & GRXSTSP_PKTSTS_Msk ) >> GRXSTSP_PKTSTS_Pos; - uint8_t const epnum = (ctl_word & GRXSTSP_EPNUM_Msk ) >> GRXSTSP_EPNUM_Pos; - uint16_t const bcnt = (ctl_word & GRXSTSP_BCNT_Msk ) >> GRXSTSP_BCNT_Pos; + uint8_t const pktsts = (ctl_word & GRXSTSP_PKTSTS_Msk) >> GRXSTSP_PKTSTS_Pos; + uint8_t const epnum = (ctl_word & GRXSTSP_EPNUM_Msk) >> GRXSTSP_EPNUM_Pos; + uint16_t const bcnt = (ctl_word & GRXSTSP_BCNT_Msk) >> GRXSTSP_BCNT_Pos; dwc2_epout_t* epout = &dwc2->epout[epnum]; @@ -1003,10 +876,10 @@ static void handle_rxflvl_irq(uint8_t rhport) // TU_LOG(DWC2_DEBUG, " daint = %08lX, doepint = %04X\r\n", (unsigned long) dwc2->daint, (unsigned int) epout->doepint); //#endif - switch ( pktsts ) - { + switch (pktsts) { // Global OUT NAK: do nothing - case GRXSTS_PKTSTS_GLOBALOUTNAK: break; + case GRXSTS_PKTSTS_GLOBALOUTNAK: + break; case GRXSTS_PKTSTS_SETUPRX: // Setup packet received @@ -1015,26 +888,22 @@ static void handle_rxflvl_irq(uint8_t rhport) // only the last one is valid. _setup_packet[0] = (*rx_fifo); _setup_packet[1] = (*rx_fifo); - break; + break; case GRXSTS_PKTSTS_SETUPDONE: // Setup packet done (Interrupt) epout->doeptsiz |= (3 << DOEPTSIZ_STUPCNT_Pos); - break; + break; - case GRXSTS_PKTSTS_OUTRX: - { + case GRXSTS_PKTSTS_OUTRX: { // Out packet received - xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); + xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); // Read packet off RxFIFO - if ( xfer->ff ) - { + if (xfer->ff) { // Ring buffer tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void*) (uintptr_t) rx_fifo, bcnt); - } - else - { + } else { // Linear buffer read_fifo_packet(rhport, xfer->buffer, bcnt); @@ -1043,73 +912,64 @@ static void handle_rxflvl_irq(uint8_t rhport) } // Truncate transfer length in case of short packet - if ( bcnt < xfer->max_size ) - { + if (bcnt < xfer->max_size) { xfer->total_len -= (epout->doeptsiz & DOEPTSIZ_XFRSIZ_Msk) >> DOEPTSIZ_XFRSIZ_Pos; - if ( epnum == 0 ) - { + if (epnum == 0) { xfer->total_len -= ep0_pending[TUSB_DIR_OUT]; ep0_pending[TUSB_DIR_OUT] = 0; } } } - break; + break; - // Out packet done (Interrupt) + // Out packet done (Interrupt) case GRXSTS_PKTSTS_OUTDONE: - // Occurred on STM32L47 with dwc2 version 3.10a but not found on other version like 2.80a or 3.30a - // May (or not) be 3.10a specific feature/bug or depending on MCU configuration - // XFRC complete is additionally generated when - // - setup packet is received - // - complete the data stage of control write is complete - if ((epnum == 0) && (bcnt == 0) && (dwc2->gsnpsid >= DWC2_CORE_REV_3_00a)) - { - uint32_t doepint = epout->doepint; + // Occurred on STM32L47 with dwc2 version 3.10a but not found on other version like 2.80a or 3.30a + // May (or not) be 3.10a specific feature/bug or depending on MCU configuration + // XFRC complete is additionally generated when + // - setup packet is received + // - complete the data stage of control write is complete + if ((epnum == 0) && (bcnt == 0) && (dwc2->gsnpsid >= DWC2_CORE_REV_3_00a)) { + uint32_t doepint = epout->doepint; - if (doepint & (DOEPINT_STPKTRX | DOEPINT_OTEPSPR)) - { - // skip this "no-data" transfer complete event - // Note: STPKTRX will be clear later by setup received handler - uint32_t clear_flags = DOEPINT_XFRC; + if (doepint & (DOEPINT_STPKTRX | DOEPINT_OTEPSPR)) { + // skip this "no-data" transfer complete event + // Note: STPKTRX will be clear later by setup received handler + uint32_t clear_flags = DOEPINT_XFRC; - if (doepint & DOEPINT_OTEPSPR) clear_flags |= DOEPINT_OTEPSPR; + if (doepint & DOEPINT_OTEPSPR) clear_flags |= DOEPINT_OTEPSPR; - epout->doepint = clear_flags; + epout->doepint = clear_flags; - // TU_LOG(DWC2_DEBUG, " FIX extra transfer complete on setup/data compete\r\n"); - } + // TU_LOG(DWC2_DEBUG, " FIX extra transfer complete on setup/data compete\r\n"); } - break; + } + break; default: // Invalid TU_BREAKPOINT(); - break; + break; } } -static void handle_epout_irq (uint8_t rhport) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +static void handle_epout_irq(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; // DAINT for a given EP clears when DOEPINTx is cleared. // OEPINT will be cleared when DAINT's out bits are cleared. - for ( uint8_t n = 0; n < ep_count; n++ ) - { - if ( dwc2->daint & TU_BIT(DAINT_OEPINT_Pos + n) ) - { + for (uint8_t n = 0; n < ep_count; n++) { + if (dwc2->daint & TU_BIT(DAINT_OEPINT_Pos + n)) { dwc2_epout_t* epout = &dwc2->epout[n]; uint32_t const doepint = epout->doepint; // SETUP packet Setup Phase done. - if ( doepint & DOEPINT_STUP ) - { + if (doepint & DOEPINT_STUP) { uint32_t clear_flag = DOEPINT_STUP; // STPKTRX is only available for version from 3_00a - if ((doepint & DOEPINT_STPKTRX) && (dwc2->gsnpsid >= DWC2_CORE_REV_3_00a)) - { + if ((doepint & DOEPINT_STPKTRX) && (dwc2->gsnpsid >= DWC2_CORE_REV_3_00a)) { clear_flag |= DOEPINT_STPKTRX; } @@ -1118,20 +978,16 @@ static void handle_epout_irq (uint8_t rhport) } // OUT XFER complete - if ( epout->doepint & DOEPINT_XFRC ) - { + if (epout->doepint & DOEPINT_XFRC) { epout->doepint = DOEPINT_XFRC; - xfer_ctl_t *xfer = XFER_CTL_BASE(n, TUSB_DIR_OUT); + xfer_ctl_t* xfer = XFER_CTL_BASE(n, TUSB_DIR_OUT); // EP0 can only handle one packet - if ( (n == 0) && ep0_pending[TUSB_DIR_OUT] ) - { + if ((n == 0) && ep0_pending[TUSB_DIR_OUT]) { // Schedule another packet to be received. edpt_schedule_packets(rhport, n, TUSB_DIR_OUT, 1, ep0_pending[TUSB_DIR_OUT]); - } - else - { + } else { dcd_event_xfer_complete(rhport, n, xfer->total_len, XFER_RESULT_SUCCESS, true); } } @@ -1139,40 +995,32 @@ static void handle_epout_irq (uint8_t rhport) } } -static void handle_epin_irq (uint8_t rhport) -{ - dwc2_regs_t * dwc2 = DWC2_REG(rhport); +static void handle_epin_irq(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; - dwc2_epin_t* epin = dwc2->epin; + dwc2_epin_t* epin = dwc2->epin; // DAINT for a given EP clears when DIEPINTx is cleared. // IEPINT will be cleared when DAINT's out bits are cleared. - for ( uint8_t n = 0; n < ep_count; n++ ) - { - if ( dwc2->daint & TU_BIT(DAINT_IEPINT_Pos + n) ) - { + for (uint8_t n = 0; n < ep_count; n++) { + if (dwc2->daint & TU_BIT(DAINT_IEPINT_Pos + n)) { // IN XFER complete (entire xfer). - xfer_ctl_t *xfer = XFER_CTL_BASE(n, TUSB_DIR_IN); + xfer_ctl_t* xfer = XFER_CTL_BASE(n, TUSB_DIR_IN); - if ( epin[n].diepint & DIEPINT_XFRC ) - { + if (epin[n].diepint & DIEPINT_XFRC) { epin[n].diepint = DIEPINT_XFRC; // EP0 can only handle one packet - if ( (n == 0) && ep0_pending[TUSB_DIR_IN] ) - { + if ((n == 0) && ep0_pending[TUSB_DIR_IN]) { // Schedule another packet to be transmitted. edpt_schedule_packets(rhport, n, TUSB_DIR_IN, 1, ep0_pending[TUSB_DIR_IN]); - } - else - { + } else { dcd_event_xfer_complete(rhport, n | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true); } } // XFER FIFO empty - if ( (epin[n].diepint & DIEPINT_TXFE) && (dwc2->diepempmsk & (1 << n)) ) - { + if ((epin[n].diepint & DIEPINT_TXFE) && (dwc2->diepempmsk & (1 << n))) { // diepint's TXFE bit is read-only, software cannot clear it. // It will only be cleared by hardware when written bytes is more than // - 64 bytes or @@ -1181,8 +1029,7 @@ static void handle_epin_irq (uint8_t rhport) uint16_t remaining_packets = (epin[n].dieptsiz & DIEPTSIZ_PKTCNT_Msk) >> DIEPTSIZ_PKTCNT_Pos; // Process every single packet (only whole packets can be written to fifo) - for ( uint16_t i = 0; i < remaining_packets; i++ ) - { + for (uint16_t i = 0; i < remaining_packets; i++) { uint16_t const remaining_bytes = (epin[n].dieptsiz & DIEPTSIZ_XFRSIZ_Msk) >> DIEPTSIZ_XFRSIZ_Pos; // Packet can not be larger than ep max size @@ -1190,16 +1037,13 @@ static void handle_epin_irq (uint8_t rhport) // It's only possible to write full packets into FIFO. Therefore DTXFSTS register of current // EP has to be checked if the buffer can take another WHOLE packet - if ( packet_size > ((epin[n].dtxfsts & DTXFSTS_INEPTFSAV_Msk) << 2) ) break; + if (packet_size > ((epin[n].dtxfsts & DTXFSTS_INEPTFSAV_Msk) << 2)) break; // Push packet to Tx-FIFO - if ( xfer->ff ) - { - volatile uint32_t *tx_fifo = dwc2->fifo[n]; + if (xfer->ff) { + volatile uint32_t* tx_fifo = dwc2->fifo[n]; tu_fifo_read_n_const_addr_full_words(xfer->ff, (void*) (uintptr_t) tx_fifo, packet_size); - } - else - { + } else { write_fifo_packet(rhport, n, xfer->buffer, packet_size); // Increment pointer to xfer data @@ -1208,8 +1052,7 @@ static void handle_epin_irq (uint8_t rhport) } // Turn off TXFE if all bytes are written. - if ( ((epin[n].dieptsiz & DIEPTSIZ_XFRSIZ_Msk) >> DIEPTSIZ_XFRSIZ_Pos) == 0 ) - { + if (((epin[n].dieptsiz & DIEPTSIZ_XFRSIZ_Msk) >> DIEPTSIZ_XFRSIZ_Pos) == 0) { dwc2->diepempmsk &= ~(1 << n); } } @@ -1217,55 +1060,49 @@ static void handle_epin_irq (uint8_t rhport) } } -void dcd_int_handler(uint8_t rhport) -{ - dwc2_regs_t *dwc2 = DWC2_REG(rhport); +void dcd_int_handler(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint32_t const int_mask = dwc2->gintmsk; uint32_t const int_status = dwc2->gintsts & int_mask; - if(int_status & GINTSTS_USBRST) - { + if (int_status & GINTSTS_USBRST) { // USBRST is start of reset. dwc2->gintsts = GINTSTS_USBRST; bus_reset(rhport); } - if(int_status & GINTSTS_ENUMDNE) - { + if (int_status & GINTSTS_ENUMDNE) { // ENUMDNE is the end of reset where speed of the link is detected dwc2->gintsts = GINTSTS_ENUMDNE; tusb_speed_t speed; - switch ((dwc2->dsts & DSTS_ENUMSPD_Msk) >> DSTS_ENUMSPD_Pos) - { + switch ((dwc2->dsts & DSTS_ENUMSPD_Msk) >> DSTS_ENUMSPD_Pos) { case DSTS_ENUMSPD_HS: speed = TUSB_SPEED_HIGH; - break; + break; case DSTS_ENUMSPD_LS: speed = TUSB_SPEED_LOW; - break; + break; case DSTS_ENUMSPD_FS_HSPHY: case DSTS_ENUMSPD_FS: default: speed = TUSB_SPEED_FULL; - break; + break; } dcd_event_bus_reset(rhport, speed, true); } - if(int_status & GINTSTS_USBSUSP) - { + if (int_status & GINTSTS_USBSUSP) { dwc2->gintsts = GINTSTS_USBSUSP; dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); } - if(int_status & GINTSTS_WKUINT) - { + if (int_status & GINTSTS_WKUINT) { dwc2->gintsts = GINTSTS_WKUINT; dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); } @@ -1273,30 +1110,24 @@ void dcd_int_handler(uint8_t rhport) // TODO check GINTSTS_DISCINT for disconnect detection // if(int_status & GINTSTS_DISCINT) - if(int_status & GINTSTS_OTGINT) - { + if (int_status & GINTSTS_OTGINT) { // OTG INT bit is read-only uint32_t const otg_int = dwc2->gotgint; - if (otg_int & GOTGINT_SEDET) - { + if (otg_int & GOTGINT_SEDET) { dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true); } dwc2->gotgint = otg_int; } - if(int_status & GINTSTS_SOF) - { + if (int_status & GINTSTS_SOF) { dwc2->gotgint = GINTSTS_SOF; - if (_sof_en) - { + if (_sof_en) { uint32_t frame = (dwc2->dsts & (DSTS_FNSOF)) >> 8; dcd_event_sof(rhport, frame, true); - } - else - { + } else { // Disable SOF interrupt if SOF was not explicitly enabled. SOF was used for remote wakeup detection dwc2->gintmsk &= ~GINTMSK_SOFM; } @@ -1305,22 +1136,19 @@ void dcd_int_handler(uint8_t rhport) } // RxFIFO non-empty interrupt handling. - if(int_status & GINTSTS_RXFLVL) - { + if (int_status & GINTSTS_RXFLVL) { // RXFLVL bit is read-only // Mask out RXFLVL while reading data from FIFO dwc2->gintmsk &= ~GINTMSK_RXFLVLM; // Loop until all available packets were handled - do - { + do { handle_rxflvl_irq(rhport); - } while(dwc2->gotgint & GINTSTS_RXFLVL); + } while (dwc2->gotgint & GINTSTS_RXFLVL); // Manage RX FIFO size - if (_out_ep_closed) - { + if (_out_ep_closed) { update_grxfsiz(rhport); // Disable flag @@ -1331,15 +1159,13 @@ void dcd_int_handler(uint8_t rhport) } // OUT endpoint interrupt handling. - if(int_status & GINTSTS_OEPINT) - { + if (int_status & GINTSTS_OEPINT) { // OEPINT is read-only, clear using DOEPINTn handle_epout_irq(rhport); } // IN endpoint interrupt handling. - if(int_status & GINTSTS_IEPINT) - { + if (int_status & GINTSTS_IEPINT) { // IEPINT bit read-only, clear using DIEPINTn handle_epin_irq(rhport); } From 9f0223dccd9992f936054bae3c6256280af7f26a Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 10:58:15 +0700 Subject: [PATCH 27/82] minor clean up --- hw/bsp/stm32f7/family.c | 2 +- src/portable/synopsys/dwc2/dwc2_type.h | 1790 ++++++++++++------------ 2 files changed, 911 insertions(+), 881 deletions(-) diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index b504c435a..18cee073d 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -199,7 +199,7 @@ void board_init(void) { __HAL_RCC_OTGPHYC_CLK_ENABLE(); #else - // MUC with external ULPI PHY + // MCU with external ULPI PHY /* ULPI CLK */ GPIO_InitStruct.Pin = GPIO_PIN_5; diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 6516882da..c15771237 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -32,7 +32,7 @@ typedef struct uint32_t ep_fifo_size; }dwc2_controller_t; -/* DWC OTG HW Release versions */ +// DWC OTG HW Release versions #define DWC2_CORE_REV_2_71a 0x4f54271a #define DWC2_CORE_REV_2_72a 0x4f54272a #define DWC2_CORE_REV_2_80a 0x4f54280a @@ -49,7 +49,7 @@ typedef struct #define DWC2_HS_IOT_REV_1_00a 0x5532100a #define DWC2_CORE_REV_MASK 0x0000ffff -/* DWC OTG HW Core ID */ +// DWC OTG HW Core ID #define DWC2_OTG_ID 0x4f540000 #define DWC2_FS_IOT_ID 0x55310000 #define DWC2_HS_IOT_ID 0x55320000 @@ -58,13 +58,13 @@ typedef struct // HS PHY typedef struct { - volatile uint32_t HS_PHYC_PLL; // This register is used to control the PLL of the HS PHY. 000h */ - volatile uint32_t Reserved04; // Reserved 004h */ - volatile uint32_t Reserved08; // Reserved 008h */ - volatile uint32_t HS_PHYC_TUNE; // This register is used to control the tuning interface of the High Speed PHY. 00Ch */ - volatile uint32_t Reserved10; // Reserved 010h */ - volatile uint32_t Reserved14; // Reserved 014h */ - volatile uint32_t HS_PHYC_LDO; // This register is used to control the regulator (LDO). 018h */ + volatile uint32_t HS_PHYC_PLL; // 000h This register is used to control the PLL of the HS PHY. + volatile uint32_t Reserved04; // 004h Reserved + volatile uint32_t Reserved08; // 008h Reserved + volatile uint32_t HS_PHYC_TUNE; // 00Ch This register is used to control the tuning interface of the High Speed PHY. + volatile uint32_t Reserved10; // 010h Reserved + volatile uint32_t Reserved14; // 014h Reserved + volatile uint32_t HS_PHYC_LDO; // 018h This register is used to control the regulator (LDO). } HS_PHYC_GlobalTypeDef; #endif @@ -299,103 +299,103 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); /******************** Bit definition for GOTGCTL register ********************/ #define GOTGCTL_SRQSCS_Pos (0U) -#define GOTGCTL_SRQSCS_Msk (0x1UL << GOTGCTL_SRQSCS_Pos) // 0x00000001 */ -#define GOTGCTL_SRQSCS GOTGCTL_SRQSCS_Msk // Session request success */ +#define GOTGCTL_SRQSCS_Msk (0x1UL << GOTGCTL_SRQSCS_Pos) // 0x00000001 +#define GOTGCTL_SRQSCS GOTGCTL_SRQSCS_Msk // Session request success #define GOTGCTL_SRQ_Pos (1U) -#define GOTGCTL_SRQ_Msk (0x1UL << GOTGCTL_SRQ_Pos) // 0x00000002 */ -#define GOTGCTL_SRQ GOTGCTL_SRQ_Msk // Session request */ +#define GOTGCTL_SRQ_Msk (0x1UL << GOTGCTL_SRQ_Pos) // 0x00000002 +#define GOTGCTL_SRQ GOTGCTL_SRQ_Msk // Session request #define GOTGCTL_VBVALOEN_Pos (2U) -#define GOTGCTL_VBVALOEN_Msk (0x1UL << GOTGCTL_VBVALOEN_Pos) // 0x00000004 */ -#define GOTGCTL_VBVALOEN GOTGCTL_VBVALOEN_Msk // VBUS valid override enable */ +#define GOTGCTL_VBVALOEN_Msk (0x1UL << GOTGCTL_VBVALOEN_Pos) // 0x00000004 +#define GOTGCTL_VBVALOEN GOTGCTL_VBVALOEN_Msk // VBUS valid override enable #define GOTGCTL_VBVALOVAL_Pos (3U) -#define GOTGCTL_VBVALOVAL_Msk (0x1UL << GOTGCTL_VBVALOVAL_Pos) // 0x00000008 */ -#define GOTGCTL_VBVALOVAL GOTGCTL_VBVALOVAL_Msk // VBUS valid override value */ +#define GOTGCTL_VBVALOVAL_Msk (0x1UL << GOTGCTL_VBVALOVAL_Pos) // 0x00000008 +#define GOTGCTL_VBVALOVAL GOTGCTL_VBVALOVAL_Msk // VBUS valid override value #define GOTGCTL_AVALOEN_Pos (4U) -#define GOTGCTL_AVALOEN_Msk (0x1UL << GOTGCTL_AVALOEN_Pos) // 0x00000010 */ -#define GOTGCTL_AVALOEN GOTGCTL_AVALOEN_Msk // A-peripheral session valid override enable */ +#define GOTGCTL_AVALOEN_Msk (0x1UL << GOTGCTL_AVALOEN_Pos) // 0x00000010 +#define GOTGCTL_AVALOEN GOTGCTL_AVALOEN_Msk // A-peripheral session valid override enable #define GOTGCTL_AVALOVAL_Pos (5U) -#define GOTGCTL_AVALOVAL_Msk (0x1UL << GOTGCTL_AVALOVAL_Pos) // 0x00000020 */ -#define GOTGCTL_AVALOVAL GOTGCTL_AVALOVAL_Msk // A-peripheral session valid override value */ +#define GOTGCTL_AVALOVAL_Msk (0x1UL << GOTGCTL_AVALOVAL_Pos) // 0x00000020 +#define GOTGCTL_AVALOVAL GOTGCTL_AVALOVAL_Msk // A-peripheral session valid override value #define GOTGCTL_BVALOEN_Pos (6U) -#define GOTGCTL_BVALOEN_Msk (0x1UL << GOTGCTL_BVALOEN_Pos) // 0x00000040 */ -#define GOTGCTL_BVALOEN GOTGCTL_BVALOEN_Msk // B-peripheral session valid override enable */ +#define GOTGCTL_BVALOEN_Msk (0x1UL << GOTGCTL_BVALOEN_Pos) // 0x00000040 +#define GOTGCTL_BVALOEN GOTGCTL_BVALOEN_Msk // B-peripheral session valid override enable #define GOTGCTL_BVALOVAL_Pos (7U) -#define GOTGCTL_BVALOVAL_Msk (0x1UL << GOTGCTL_BVALOVAL_Pos) // 0x00000080 */ -#define GOTGCTL_BVALOVAL GOTGCTL_BVALOVAL_Msk // B-peripheral session valid override value */ +#define GOTGCTL_BVALOVAL_Msk (0x1UL << GOTGCTL_BVALOVAL_Pos) // 0x00000080 +#define GOTGCTL_BVALOVAL GOTGCTL_BVALOVAL_Msk // B-peripheral session valid override value #define GOTGCTL_HNGSCS_Pos (8U) -#define GOTGCTL_HNGSCS_Msk (0x1UL << GOTGCTL_HNGSCS_Pos) // 0x00000100 */ -#define GOTGCTL_HNGSCS GOTGCTL_HNGSCS_Msk // Host set HNP enable */ +#define GOTGCTL_HNGSCS_Msk (0x1UL << GOTGCTL_HNGSCS_Pos) // 0x00000100 +#define GOTGCTL_HNGSCS GOTGCTL_HNGSCS_Msk // Host set HNP enable #define GOTGCTL_HNPRQ_Pos (9U) -#define GOTGCTL_HNPRQ_Msk (0x1UL << GOTGCTL_HNPRQ_Pos) // 0x00000200 */ -#define GOTGCTL_HNPRQ GOTGCTL_HNPRQ_Msk // HNP request */ +#define GOTGCTL_HNPRQ_Msk (0x1UL << GOTGCTL_HNPRQ_Pos) // 0x00000200 +#define GOTGCTL_HNPRQ GOTGCTL_HNPRQ_Msk // HNP request #define GOTGCTL_HSHNPEN_Pos (10U) -#define GOTGCTL_HSHNPEN_Msk (0x1UL << GOTGCTL_HSHNPEN_Pos) // 0x00000400 */ -#define GOTGCTL_HSHNPEN GOTGCTL_HSHNPEN_Msk // Host set HNP enable */ +#define GOTGCTL_HSHNPEN_Msk (0x1UL << GOTGCTL_HSHNPEN_Pos) // 0x00000400 +#define GOTGCTL_HSHNPEN GOTGCTL_HSHNPEN_Msk // Host set HNP enable #define GOTGCTL_DHNPEN_Pos (11U) -#define GOTGCTL_DHNPEN_Msk (0x1UL << GOTGCTL_DHNPEN_Pos) // 0x00000800 */ -#define GOTGCTL_DHNPEN GOTGCTL_DHNPEN_Msk // Device HNP enabled */ +#define GOTGCTL_DHNPEN_Msk (0x1UL << GOTGCTL_DHNPEN_Pos) // 0x00000800 +#define GOTGCTL_DHNPEN GOTGCTL_DHNPEN_Msk // Device HNP enabled #define GOTGCTL_EHEN_Pos (12U) -#define GOTGCTL_EHEN_Msk (0x1UL << GOTGCTL_EHEN_Pos) // 0x00001000 */ -#define GOTGCTL_EHEN GOTGCTL_EHEN_Msk // Embedded host enable */ +#define GOTGCTL_EHEN_Msk (0x1UL << GOTGCTL_EHEN_Pos) // 0x00001000 +#define GOTGCTL_EHEN GOTGCTL_EHEN_Msk // Embedded host enable #define GOTGCTL_CIDSTS_Pos (16U) -#define GOTGCTL_CIDSTS_Msk (0x1UL << GOTGCTL_CIDSTS_Pos) // 0x00010000 */ -#define GOTGCTL_CIDSTS GOTGCTL_CIDSTS_Msk // Connector ID status */ +#define GOTGCTL_CIDSTS_Msk (0x1UL << GOTGCTL_CIDSTS_Pos) // 0x00010000 +#define GOTGCTL_CIDSTS GOTGCTL_CIDSTS_Msk // Connector ID status #define GOTGCTL_DBCT_Pos (17U) -#define GOTGCTL_DBCT_Msk (0x1UL << GOTGCTL_DBCT_Pos) // 0x00020000 */ -#define GOTGCTL_DBCT GOTGCTL_DBCT_Msk // Long/short debounce time */ +#define GOTGCTL_DBCT_Msk (0x1UL << GOTGCTL_DBCT_Pos) // 0x00020000 +#define GOTGCTL_DBCT GOTGCTL_DBCT_Msk // Long/short debounce time #define GOTGCTL_ASVLD_Pos (18U) -#define GOTGCTL_ASVLD_Msk (0x1UL << GOTGCTL_ASVLD_Pos) // 0x00040000 */ -#define GOTGCTL_ASVLD GOTGCTL_ASVLD_Msk // A-session valid */ +#define GOTGCTL_ASVLD_Msk (0x1UL << GOTGCTL_ASVLD_Pos) // 0x00040000 +#define GOTGCTL_ASVLD GOTGCTL_ASVLD_Msk // A-session valid #define GOTGCTL_BSESVLD_Pos (19U) -#define GOTGCTL_BSESVLD_Msk (0x1UL << GOTGCTL_BSESVLD_Pos) // 0x00080000 */ -#define GOTGCTL_BSESVLD GOTGCTL_BSESVLD_Msk // B-session valid */ +#define GOTGCTL_BSESVLD_Msk (0x1UL << GOTGCTL_BSESVLD_Pos) // 0x00080000 +#define GOTGCTL_BSESVLD GOTGCTL_BSESVLD_Msk // B-session valid #define GOTGCTL_OTGVER_Pos (20U) -#define GOTGCTL_OTGVER_Msk (0x1UL << GOTGCTL_OTGVER_Pos) // 0x00100000 */ -#define GOTGCTL_OTGVER GOTGCTL_OTGVER_Msk // OTG version */ +#define GOTGCTL_OTGVER_Msk (0x1UL << GOTGCTL_OTGVER_Pos) // 0x00100000 +#define GOTGCTL_OTGVER GOTGCTL_OTGVER_Msk // OTG version /******************** Bit definition for HCFG register ********************/ #define HCFG_FSLSPCS_Pos (0U) -#define HCFG_FSLSPCS_Msk (0x3UL << HCFG_FSLSPCS_Pos) // 0x00000003 */ -#define HCFG_FSLSPCS HCFG_FSLSPCS_Msk // FS/LS PHY clock select */ -#define HCFG_FSLSPCS_0 (0x1UL << HCFG_FSLSPCS_Pos) // 0x00000001 */ -#define HCFG_FSLSPCS_1 (0x2UL << HCFG_FSLSPCS_Pos) // 0x00000002 */ +#define HCFG_FSLSPCS_Msk (0x3UL << HCFG_FSLSPCS_Pos) // 0x00000003 +#define HCFG_FSLSPCS HCFG_FSLSPCS_Msk // FS/LS PHY clock select +#define HCFG_FSLSPCS_0 (0x1UL << HCFG_FSLSPCS_Pos) // 0x00000001 +#define HCFG_FSLSPCS_1 (0x2UL << HCFG_FSLSPCS_Pos) // 0x00000002 #define HCFG_FSLSS_Pos (2U) -#define HCFG_FSLSS_Msk (0x1UL << HCFG_FSLSS_Pos) // 0x00000004 */ -#define HCFG_FSLSS HCFG_FSLSS_Msk // FS- and LS-only support */ +#define HCFG_FSLSS_Msk (0x1UL << HCFG_FSLSS_Pos) // 0x00000004 +#define HCFG_FSLSS HCFG_FSLSS_Msk // FS- and LS-only support /******************** Bit definition for PCGCR register ********************/ #define PCGCR_STPPCLK_Pos (0U) -#define PCGCR_STPPCLK_Msk (0x1UL << PCGCR_STPPCLK_Pos) // 0x00000001 */ -#define PCGCR_STPPCLK PCGCR_STPPCLK_Msk // Stop PHY clock */ +#define PCGCR_STPPCLK_Msk (0x1UL << PCGCR_STPPCLK_Pos) // 0x00000001 +#define PCGCR_STPPCLK PCGCR_STPPCLK_Msk // Stop PHY clock #define PCGCR_GATEHCLK_Pos (1U) -#define PCGCR_GATEHCLK_Msk (0x1UL << PCGCR_GATEHCLK_Pos) // 0x00000002 */ -#define PCGCR_GATEHCLK PCGCR_GATEHCLK_Msk // Gate HCLK */ +#define PCGCR_GATEHCLK_Msk (0x1UL << PCGCR_GATEHCLK_Pos) // 0x00000002 +#define PCGCR_GATEHCLK PCGCR_GATEHCLK_Msk // Gate HCLK #define PCGCR_PHYSUSP_Pos (4U) -#define PCGCR_PHYSUSP_Msk (0x1UL << PCGCR_PHYSUSP_Pos) // 0x00000010 */ -#define PCGCR_PHYSUSP PCGCR_PHYSUSP_Msk // PHY suspended */ +#define PCGCR_PHYSUSP_Msk (0x1UL << PCGCR_PHYSUSP_Pos) // 0x00000010 +#define PCGCR_PHYSUSP PCGCR_PHYSUSP_Msk // PHY suspended /******************** Bit definition for GOTGINT register ********************/ #define GOTGINT_SEDET_Pos (2U) -#define GOTGINT_SEDET_Msk (0x1UL << GOTGINT_SEDET_Pos) // 0x00000004 */ -#define GOTGINT_SEDET GOTGINT_SEDET_Msk // Session end detected */ +#define GOTGINT_SEDET_Msk (0x1UL << GOTGINT_SEDET_Pos) // 0x00000004 +#define GOTGINT_SEDET GOTGINT_SEDET_Msk // Session end detected #define GOTGINT_SRSSCHG_Pos (8U) -#define GOTGINT_SRSSCHG_Msk (0x1UL << GOTGINT_SRSSCHG_Pos) // 0x00000100 */ -#define GOTGINT_SRSSCHG GOTGINT_SRSSCHG_Msk // Session request success status change */ +#define GOTGINT_SRSSCHG_Msk (0x1UL << GOTGINT_SRSSCHG_Pos) // 0x00000100 +#define GOTGINT_SRSSCHG GOTGINT_SRSSCHG_Msk // Session request success status change #define GOTGINT_HNSSCHG_Pos (9U) -#define GOTGINT_HNSSCHG_Msk (0x1UL << GOTGINT_HNSSCHG_Pos) // 0x00000200 */ -#define GOTGINT_HNSSCHG GOTGINT_HNSSCHG_Msk // Host negotiation success status change */ +#define GOTGINT_HNSSCHG_Msk (0x1UL << GOTGINT_HNSSCHG_Pos) // 0x00000200 +#define GOTGINT_HNSSCHG GOTGINT_HNSSCHG_Msk // Host negotiation success status change #define GOTGINT_HNGDET_Pos (17U) -#define GOTGINT_HNGDET_Msk (0x1UL << GOTGINT_HNGDET_Pos) // 0x00020000 */ -#define GOTGINT_HNGDET GOTGINT_HNGDET_Msk // Host negotiation detected */ +#define GOTGINT_HNGDET_Msk (0x1UL << GOTGINT_HNGDET_Pos) // 0x00020000 +#define GOTGINT_HNGDET GOTGINT_HNGDET_Msk // Host negotiation detected #define GOTGINT_ADTOCHG_Pos (18U) -#define GOTGINT_ADTOCHG_Msk (0x1UL << GOTGINT_ADTOCHG_Pos) // 0x00040000 */ -#define GOTGINT_ADTOCHG GOTGINT_ADTOCHG_Msk // A-device timeout change */ +#define GOTGINT_ADTOCHG_Msk (0x1UL << GOTGINT_ADTOCHG_Pos) // 0x00040000 +#define GOTGINT_ADTOCHG GOTGINT_ADTOCHG_Msk // A-device timeout change #define GOTGINT_DBCDNE_Pos (19U) -#define GOTGINT_DBCDNE_Msk (0x1UL << GOTGINT_DBCDNE_Pos) // 0x00080000 */ -#define GOTGINT_DBCDNE GOTGINT_DBCDNE_Msk // Debounce done */ +#define GOTGINT_DBCDNE_Msk (0x1UL << GOTGINT_DBCDNE_Pos) // 0x00080000 +#define GOTGINT_DBCDNE GOTGINT_DBCDNE_Msk // Debounce done #define GOTGINT_IDCHNG_Pos (20U) -#define GOTGINT_IDCHNG_Msk (0x1UL << GOTGINT_IDCHNG_Pos) // 0x00100000 */ -#define GOTGINT_IDCHNG GOTGINT_IDCHNG_Msk // Change in ID pin input value */ +#define GOTGINT_IDCHNG_Msk (0x1UL << GOTGINT_IDCHNG_Pos) // 0x00100000 +#define GOTGINT_IDCHNG GOTGINT_IDCHNG_Msk // Change in ID pin input value /******************** Bit definition for DCFG register ********************/ #define DCFG_DSPD_Pos (0U) @@ -406,92 +406,92 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DCFG_DSPD_FS 3 // Fullspeed on FS PHY #define DCFG_NZLSOHSK_Pos (2U) -#define DCFG_NZLSOHSK_Msk (0x1UL << DCFG_NZLSOHSK_Pos) // 0x00000004 */ -#define DCFG_NZLSOHSK DCFG_NZLSOHSK_Msk // Nonzero-length status OUT handshake */ +#define DCFG_NZLSOHSK_Msk (0x1UL << DCFG_NZLSOHSK_Pos) // 0x00000004 +#define DCFG_NZLSOHSK DCFG_NZLSOHSK_Msk // Nonzero-length status OUT handshake #define DCFG_DAD_Pos (4U) -#define DCFG_DAD_Msk (0x7FUL << DCFG_DAD_Pos) // 0x000007F0 */ -#define DCFG_DAD DCFG_DAD_Msk // Device address */ -#define DCFG_DAD_0 (0x01UL << DCFG_DAD_Pos) // 0x00000010 */ -#define DCFG_DAD_1 (0x02UL << DCFG_DAD_Pos) // 0x00000020 */ -#define DCFG_DAD_2 (0x04UL << DCFG_DAD_Pos) // 0x00000040 */ -#define DCFG_DAD_3 (0x08UL << DCFG_DAD_Pos) // 0x00000080 */ -#define DCFG_DAD_4 (0x10UL << DCFG_DAD_Pos) // 0x00000100 */ -#define DCFG_DAD_5 (0x20UL << DCFG_DAD_Pos) // 0x00000200 */ -#define DCFG_DAD_6 (0x40UL << DCFG_DAD_Pos) // 0x00000400 */ +#define DCFG_DAD_Msk (0x7FUL << DCFG_DAD_Pos) // 0x000007F0 +#define DCFG_DAD DCFG_DAD_Msk // Device address +#define DCFG_DAD_0 (0x01UL << DCFG_DAD_Pos) // 0x00000010 +#define DCFG_DAD_1 (0x02UL << DCFG_DAD_Pos) // 0x00000020 +#define DCFG_DAD_2 (0x04UL << DCFG_DAD_Pos) // 0x00000040 +#define DCFG_DAD_3 (0x08UL << DCFG_DAD_Pos) // 0x00000080 +#define DCFG_DAD_4 (0x10UL << DCFG_DAD_Pos) // 0x00000100 +#define DCFG_DAD_5 (0x20UL << DCFG_DAD_Pos) // 0x00000200 +#define DCFG_DAD_6 (0x40UL << DCFG_DAD_Pos) // 0x00000400 #define DCFG_PFIVL_Pos (11U) -#define DCFG_PFIVL_Msk (0x3UL << DCFG_PFIVL_Pos) // 0x00001800 */ -#define DCFG_PFIVL DCFG_PFIVL_Msk // Periodic (micro)frame interval */ -#define DCFG_PFIVL_0 (0x1UL << DCFG_PFIVL_Pos) // 0x00000800 */ -#define DCFG_PFIVL_1 (0x2UL << DCFG_PFIVL_Pos) // 0x00001000 */ +#define DCFG_PFIVL_Msk (0x3UL << DCFG_PFIVL_Pos) // 0x00001800 +#define DCFG_PFIVL DCFG_PFIVL_Msk // Periodic (micro)frame interval +#define DCFG_PFIVL_0 (0x1UL << DCFG_PFIVL_Pos) // 0x00000800 +#define DCFG_PFIVL_1 (0x2UL << DCFG_PFIVL_Pos) // 0x00001000 #define DCFG_XCVRDLY_Pos (14U) -#define DCFG_XCVRDLY_Msk (0x1UL << DCFG_XCVRDLY_Pos) /*!< 0x00004000 */ +#define DCFG_XCVRDLY_Msk (0x1UL << DCFG_XCVRDLY_Pos) // 0x00004000 #define DCFG_XCVRDLY DCFG_XCVRDLY_Msk // Enables delay between xcvr_sel and txvalid during device chirp #define DCFG_PERSCHIVL_Pos (24U) -#define DCFG_PERSCHIVL_Msk (0x3UL << DCFG_PERSCHIVL_Pos) // 0x03000000 */ -#define DCFG_PERSCHIVL DCFG_PERSCHIVL_Msk // Periodic scheduling interval */ -#define DCFG_PERSCHIVL_0 (0x1UL << DCFG_PERSCHIVL_Pos) // 0x01000000 */ -#define DCFG_PERSCHIVL_1 (0x2UL << DCFG_PERSCHIVL_Pos) // 0x02000000 */ +#define DCFG_PERSCHIVL_Msk (0x3UL << DCFG_PERSCHIVL_Pos) // 0x03000000 +#define DCFG_PERSCHIVL DCFG_PERSCHIVL_Msk // Periodic scheduling interval +#define DCFG_PERSCHIVL_0 (0x1UL << DCFG_PERSCHIVL_Pos) // 0x01000000 +#define DCFG_PERSCHIVL_1 (0x2UL << DCFG_PERSCHIVL_Pos) // 0x02000000 /******************** Bit definition for DCTL register ********************/ #define DCTL_RWUSIG_Pos (0U) -#define DCTL_RWUSIG_Msk (0x1UL << DCTL_RWUSIG_Pos) // 0x00000001 */ -#define DCTL_RWUSIG DCTL_RWUSIG_Msk // Remote wakeup signaling */ +#define DCTL_RWUSIG_Msk (0x1UL << DCTL_RWUSIG_Pos) // 0x00000001 +#define DCTL_RWUSIG DCTL_RWUSIG_Msk // Remote wakeup signaling #define DCTL_SDIS_Pos (1U) -#define DCTL_SDIS_Msk (0x1UL << DCTL_SDIS_Pos) // 0x00000002 */ -#define DCTL_SDIS DCTL_SDIS_Msk // Soft disconnect */ +#define DCTL_SDIS_Msk (0x1UL << DCTL_SDIS_Pos) // 0x00000002 +#define DCTL_SDIS DCTL_SDIS_Msk // Soft disconnect #define DCTL_GINSTS_Pos (2U) -#define DCTL_GINSTS_Msk (0x1UL << DCTL_GINSTS_Pos) // 0x00000004 */ -#define DCTL_GINSTS DCTL_GINSTS_Msk // Global IN NAK status */ +#define DCTL_GINSTS_Msk (0x1UL << DCTL_GINSTS_Pos) // 0x00000004 +#define DCTL_GINSTS DCTL_GINSTS_Msk // Global IN NAK status #define DCTL_GONSTS_Pos (3U) -#define DCTL_GONSTS_Msk (0x1UL << DCTL_GONSTS_Pos) // 0x00000008 */ -#define DCTL_GONSTS DCTL_GONSTS_Msk // Global OUT NAK status */ +#define DCTL_GONSTS_Msk (0x1UL << DCTL_GONSTS_Pos) // 0x00000008 +#define DCTL_GONSTS DCTL_GONSTS_Msk // Global OUT NAK status #define DCTL_TCTL_Pos (4U) -#define DCTL_TCTL_Msk (0x7UL << DCTL_TCTL_Pos) // 0x00000070 */ -#define DCTL_TCTL DCTL_TCTL_Msk // Test control */ -#define DCTL_TCTL_0 (0x1UL << DCTL_TCTL_Pos) // 0x00000010 */ -#define DCTL_TCTL_1 (0x2UL << DCTL_TCTL_Pos) // 0x00000020 */ -#define DCTL_TCTL_2 (0x4UL << DCTL_TCTL_Pos) // 0x00000040 */ +#define DCTL_TCTL_Msk (0x7UL << DCTL_TCTL_Pos) // 0x00000070 +#define DCTL_TCTL DCTL_TCTL_Msk // Test control +#define DCTL_TCTL_0 (0x1UL << DCTL_TCTL_Pos) // 0x00000010 +#define DCTL_TCTL_1 (0x2UL << DCTL_TCTL_Pos) // 0x00000020 +#define DCTL_TCTL_2 (0x4UL << DCTL_TCTL_Pos) // 0x00000040 #define DCTL_SGINAK_Pos (7U) -#define DCTL_SGINAK_Msk (0x1UL << DCTL_SGINAK_Pos) // 0x00000080 */ -#define DCTL_SGINAK DCTL_SGINAK_Msk // Set global IN NAK */ +#define DCTL_SGINAK_Msk (0x1UL << DCTL_SGINAK_Pos) // 0x00000080 +#define DCTL_SGINAK DCTL_SGINAK_Msk // Set global IN NAK #define DCTL_CGINAK_Pos (8U) -#define DCTL_CGINAK_Msk (0x1UL << DCTL_CGINAK_Pos) // 0x00000100 */ -#define DCTL_CGINAK DCTL_CGINAK_Msk // Clear global IN NAK */ +#define DCTL_CGINAK_Msk (0x1UL << DCTL_CGINAK_Pos) // 0x00000100 +#define DCTL_CGINAK DCTL_CGINAK_Msk // Clear global IN NAK #define DCTL_SGONAK_Pos (9U) -#define DCTL_SGONAK_Msk (0x1UL << DCTL_SGONAK_Pos) // 0x00000200 */ -#define DCTL_SGONAK DCTL_SGONAK_Msk // Set global OUT NAK */ +#define DCTL_SGONAK_Msk (0x1UL << DCTL_SGONAK_Pos) // 0x00000200 +#define DCTL_SGONAK DCTL_SGONAK_Msk // Set global OUT NAK #define DCTL_CGONAK_Pos (10U) -#define DCTL_CGONAK_Msk (0x1UL << DCTL_CGONAK_Pos) // 0x00000400 */ -#define DCTL_CGONAK DCTL_CGONAK_Msk // Clear global OUT NAK */ +#define DCTL_CGONAK_Msk (0x1UL << DCTL_CGONAK_Pos) // 0x00000400 +#define DCTL_CGONAK DCTL_CGONAK_Msk // Clear global OUT NAK #define DCTL_POPRGDNE_Pos (11U) -#define DCTL_POPRGDNE_Msk (0x1UL << DCTL_POPRGDNE_Pos) // 0x00000800 */ -#define DCTL_POPRGDNE DCTL_POPRGDNE_Msk // Power-on programming done */ +#define DCTL_POPRGDNE_Msk (0x1UL << DCTL_POPRGDNE_Pos) // 0x00000800 +#define DCTL_POPRGDNE DCTL_POPRGDNE_Msk // Power-on programming done /******************** Bit definition for HFIR register ********************/ #define HFIR_FRIVL_Pos (0U) -#define HFIR_FRIVL_Msk (0xFFFFUL << HFIR_FRIVL_Pos) // 0x0000FFFF */ -#define HFIR_FRIVL HFIR_FRIVL_Msk // Frame interval */ +#define HFIR_FRIVL_Msk (0xFFFFUL << HFIR_FRIVL_Pos) // 0x0000FFFF +#define HFIR_FRIVL HFIR_FRIVL_Msk // Frame interval /******************** Bit definition for HFNUM register ********************/ #define HFNUM_FRNUM_Pos (0U) -#define HFNUM_FRNUM_Msk (0xFFFFUL << HFNUM_FRNUM_Pos) // 0x0000FFFF */ -#define HFNUM_FRNUM HFNUM_FRNUM_Msk // Frame number */ +#define HFNUM_FRNUM_Msk (0xFFFFUL << HFNUM_FRNUM_Pos) // 0x0000FFFF +#define HFNUM_FRNUM HFNUM_FRNUM_Msk // Frame number #define HFNUM_FTREM_Pos (16U) -#define HFNUM_FTREM_Msk (0xFFFFUL << HFNUM_FTREM_Pos) // 0xFFFF0000 */ -#define HFNUM_FTREM HFNUM_FTREM_Msk // Frame time remaining */ +#define HFNUM_FTREM_Msk (0xFFFFUL << HFNUM_FTREM_Pos) // 0xFFFF0000 +#define HFNUM_FTREM HFNUM_FTREM_Msk // Frame time remaining /******************** Bit definition for DSTS register ********************/ #define DSTS_SUSPSTS_Pos (0U) -#define DSTS_SUSPSTS_Msk (0x1UL << DSTS_SUSPSTS_Pos) // 0x00000001 */ -#define DSTS_SUSPSTS DSTS_SUSPSTS_Msk // Suspend status */ +#define DSTS_SUSPSTS_Msk (0x1UL << DSTS_SUSPSTS_Pos) // 0x00000001 +#define DSTS_SUSPSTS DSTS_SUSPSTS_Msk // Suspend status #define DSTS_ENUMSPD_Pos (1U) -#define DSTS_ENUMSPD_Msk (0x3UL << DSTS_ENUMSPD_Pos) // 0x00000006 */ -#define DSTS_ENUMSPD DSTS_ENUMSPD_Msk // Enumerated speed */ +#define DSTS_ENUMSPD_Msk (0x3UL << DSTS_ENUMSPD_Pos) // 0x00000006 +#define DSTS_ENUMSPD DSTS_ENUMSPD_Msk // Enumerated speed #define DSTS_ENUMSPD_HS 0 // Highspeed #define DSTS_ENUMSPD_FS_HSPHY 1 // Fullspeed on HS PHY #define DSTS_ENUMSPD_LS 2 // Lowspeed @@ -499,427 +499,427 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DSTS_EERR_Pos (3U) -#define DSTS_EERR_Msk (0x1UL << DSTS_EERR_Pos) // 0x00000008 */ -#define DSTS_EERR DSTS_EERR_Msk // Erratic error */ +#define DSTS_EERR_Msk (0x1UL << DSTS_EERR_Pos) // 0x00000008 +#define DSTS_EERR DSTS_EERR_Msk // Erratic error #define DSTS_FNSOF_Pos (8U) -#define DSTS_FNSOF_Msk (0x3FFFUL << DSTS_FNSOF_Pos) // 0x003FFF00 */ -#define DSTS_FNSOF DSTS_FNSOF_Msk // Frame number of the received SOF */ +#define DSTS_FNSOF_Msk (0x3FFFUL << DSTS_FNSOF_Pos) // 0x003FFF00 +#define DSTS_FNSOF DSTS_FNSOF_Msk // Frame number of the received SOF /******************** Bit definition for GAHBCFG register ********************/ #define GAHBCFG_GINT_Pos (0U) -#define GAHBCFG_GINT_Msk (0x1UL << GAHBCFG_GINT_Pos) // 0x00000001 */ -#define GAHBCFG_GINT GAHBCFG_GINT_Msk // Global interrupt mask */ +#define GAHBCFG_GINT_Msk (0x1UL << GAHBCFG_GINT_Pos) // 0x00000001 +#define GAHBCFG_GINT GAHBCFG_GINT_Msk // Global interrupt mask #define GAHBCFG_HBSTLEN_Pos (1U) -#define GAHBCFG_HBSTLEN_Msk (0xFUL << GAHBCFG_HBSTLEN_Pos) // 0x0000001E */ -#define GAHBCFG_HBSTLEN GAHBCFG_HBSTLEN_Msk // Burst length/type */ -#define GAHBCFG_HBSTLEN_0 (0x0UL << GAHBCFG_HBSTLEN_Pos) // Single */ -#define GAHBCFG_HBSTLEN_1 (0x1UL << GAHBCFG_HBSTLEN_Pos) // INCR */ -#define GAHBCFG_HBSTLEN_2 (0x3UL << GAHBCFG_HBSTLEN_Pos) // INCR4 */ -#define GAHBCFG_HBSTLEN_3 (0x5UL << GAHBCFG_HBSTLEN_Pos) // INCR8 */ -#define GAHBCFG_HBSTLEN_4 (0x7UL << GAHBCFG_HBSTLEN_Pos) // INCR16 */ +#define GAHBCFG_HBSTLEN_Msk (0xFUL << GAHBCFG_HBSTLEN_Pos) // 0x0000001E +#define GAHBCFG_HBSTLEN GAHBCFG_HBSTLEN_Msk // Burst length/type +#define GAHBCFG_HBSTLEN_0 (0x0UL << GAHBCFG_HBSTLEN_Pos) // Single +#define GAHBCFG_HBSTLEN_1 (0x1UL << GAHBCFG_HBSTLEN_Pos) // INCR +#define GAHBCFG_HBSTLEN_2 (0x3UL << GAHBCFG_HBSTLEN_Pos) // INCR4 +#define GAHBCFG_HBSTLEN_3 (0x5UL << GAHBCFG_HBSTLEN_Pos) // INCR8 +#define GAHBCFG_HBSTLEN_4 (0x7UL << GAHBCFG_HBSTLEN_Pos) // INCR16 #define GAHBCFG_DMAEN_Pos (5U) -#define GAHBCFG_DMAEN_Msk (0x1UL << GAHBCFG_DMAEN_Pos) // 0x00000020 */ -#define GAHBCFG_DMAEN GAHBCFG_DMAEN_Msk // DMA enable */ +#define GAHBCFG_DMAEN_Msk (0x1UL << GAHBCFG_DMAEN_Pos) // 0x00000020 +#define GAHBCFG_DMAEN GAHBCFG_DMAEN_Msk // DMA enable #define GAHBCFG_TXFELVL_Pos (7U) -#define GAHBCFG_TXFELVL_Msk (0x1UL << GAHBCFG_TXFELVL_Pos) // 0x00000080 */ -#define GAHBCFG_TXFELVL GAHBCFG_TXFELVL_Msk // TxFIFO empty level */ +#define GAHBCFG_TXFELVL_Msk (0x1UL << GAHBCFG_TXFELVL_Pos) // 0x00000080 +#define GAHBCFG_TXFELVL GAHBCFG_TXFELVL_Msk // TxFIFO empty level #define GAHBCFG_PTXFELVL_Pos (8U) -#define GAHBCFG_PTXFELVL_Msk (0x1UL << GAHBCFG_PTXFELVL_Pos) // 0x00000100 */ -#define GAHBCFG_PTXFELVL GAHBCFG_PTXFELVL_Msk // Periodic TxFIFO empty level */ +#define GAHBCFG_PTXFELVL_Msk (0x1UL << GAHBCFG_PTXFELVL_Pos) // 0x00000100 +#define GAHBCFG_PTXFELVL GAHBCFG_PTXFELVL_Msk // Periodic TxFIFO empty level #define GSNPSID_ID_MASK TU_GENMASK(31, 16) /******************** Bit definition for GUSBCFG register ********************/ #define GUSBCFG_TOCAL_Pos (0U) -#define GUSBCFG_TOCAL_Msk (0x7UL << GUSBCFG_TOCAL_Pos) // 0x00000007 */ -#define GUSBCFG_TOCAL GUSBCFG_TOCAL_Msk // FS timeout calibration */ +#define GUSBCFG_TOCAL_Msk (0x7UL << GUSBCFG_TOCAL_Pos) // 0x00000007 +#define GUSBCFG_TOCAL GUSBCFG_TOCAL_Msk // FS timeout calibration #define GUSBCFG_PHYIF16_Pos (3U) -#define GUSBCFG_PHYIF16_Msk (0x1UL << GUSBCFG_PHYIF16_Pos) // 0x00000008 */ -#define GUSBCFG_PHYIF16 GUSBCFG_PHYIF16_Msk // PHY Interface (PHYIf) */ +#define GUSBCFG_PHYIF16_Msk (0x1UL << GUSBCFG_PHYIF16_Pos) // 0x00000008 +#define GUSBCFG_PHYIF16 GUSBCFG_PHYIF16_Msk // PHY Interface (PHYIf) #define GUSBCFG_ULPI_UTMI_SEL_Pos (4U) -#define GUSBCFG_ULPI_UTMI_SEL_Msk (0x1UL << GUSBCFG_ULPI_UTMI_SEL_Pos) // 0x00000010 */ -#define GUSBCFG_ULPI_UTMI_SEL GUSBCFG_ULPI_UTMI_SEL_Msk // ULPI or UTMI+ Select (ULPI_UTMI_Sel) */ +#define GUSBCFG_ULPI_UTMI_SEL_Msk (0x1UL << GUSBCFG_ULPI_UTMI_SEL_Pos) // 0x00000010 +#define GUSBCFG_ULPI_UTMI_SEL GUSBCFG_ULPI_UTMI_SEL_Msk // ULPI or UTMI+ Select (ULPI_UTMI_Sel) #define GUSBCFG_PHYSEL_Pos (6U) -#define GUSBCFG_PHYSEL_Msk (0x1UL << GUSBCFG_PHYSEL_Pos) // 0x00000040 */ -#define GUSBCFG_PHYSEL GUSBCFG_PHYSEL_Msk // USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */ +#define GUSBCFG_PHYSEL_Msk (0x1UL << GUSBCFG_PHYSEL_Pos) // 0x00000040 +#define GUSBCFG_PHYSEL GUSBCFG_PHYSEL_Msk // USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select #define GUSBCFG_DDRSEL TU_BIT(7) // Single Data Rate (SDR) or Double Data Rate (DDR) or ULPI interface. #define GUSBCFG_SRPCAP_Pos (8U) -#define GUSBCFG_SRPCAP_Msk (0x1UL << GUSBCFG_SRPCAP_Pos) // 0x00000100 */ -#define GUSBCFG_SRPCAP GUSBCFG_SRPCAP_Msk // SRP-capable */ +#define GUSBCFG_SRPCAP_Msk (0x1UL << GUSBCFG_SRPCAP_Pos) // 0x00000100 +#define GUSBCFG_SRPCAP GUSBCFG_SRPCAP_Msk // SRP-capable #define GUSBCFG_HNPCAP_Pos (9U) -#define GUSBCFG_HNPCAP_Msk (0x1UL << GUSBCFG_HNPCAP_Pos) // 0x00000200 */ -#define GUSBCFG_HNPCAP GUSBCFG_HNPCAP_Msk // HNP-capable */ +#define GUSBCFG_HNPCAP_Msk (0x1UL << GUSBCFG_HNPCAP_Pos) // 0x00000200 +#define GUSBCFG_HNPCAP GUSBCFG_HNPCAP_Msk // HNP-capable #define GUSBCFG_TRDT_Pos (10U) -#define GUSBCFG_TRDT_Msk (0xFUL << GUSBCFG_TRDT_Pos) // 0x00003C00 */ -#define GUSBCFG_TRDT GUSBCFG_TRDT_Msk // USB turnaround time */ +#define GUSBCFG_TRDT_Msk (0xFUL << GUSBCFG_TRDT_Pos) // 0x00003C00 +#define GUSBCFG_TRDT GUSBCFG_TRDT_Msk // USB turnaround time #define GUSBCFG_PHYLPCS_Pos (15U) -#define GUSBCFG_PHYLPCS_Msk (0x1UL << GUSBCFG_PHYLPCS_Pos) // 0x00008000 */ -#define GUSBCFG_PHYLPCS GUSBCFG_PHYLPCS_Msk // PHY Low-power clock select */ +#define GUSBCFG_PHYLPCS_Msk (0x1UL << GUSBCFG_PHYLPCS_Pos) // 0x00008000 +#define GUSBCFG_PHYLPCS GUSBCFG_PHYLPCS_Msk // PHY Low-power clock select #define GUSBCFG_ULPIFSLS_Pos (17U) -#define GUSBCFG_ULPIFSLS_Msk (0x1UL << GUSBCFG_ULPIFSLS_Pos) // 0x00020000 */ -#define GUSBCFG_ULPIFSLS GUSBCFG_ULPIFSLS_Msk // ULPI FS/LS select */ +#define GUSBCFG_ULPIFSLS_Msk (0x1UL << GUSBCFG_ULPIFSLS_Pos) // 0x00020000 +#define GUSBCFG_ULPIFSLS GUSBCFG_ULPIFSLS_Msk // ULPI FS/LS select #define GUSBCFG_ULPIAR_Pos (18U) -#define GUSBCFG_ULPIAR_Msk (0x1UL << GUSBCFG_ULPIAR_Pos) // 0x00040000 */ -#define GUSBCFG_ULPIAR GUSBCFG_ULPIAR_Msk // ULPI Auto-resume */ +#define GUSBCFG_ULPIAR_Msk (0x1UL << GUSBCFG_ULPIAR_Pos) // 0x00040000 +#define GUSBCFG_ULPIAR GUSBCFG_ULPIAR_Msk // ULPI Auto-resume #define GUSBCFG_ULPICSM_Pos (19U) -#define GUSBCFG_ULPICSM_Msk (0x1UL << GUSBCFG_ULPICSM_Pos) // 0x00080000 */ -#define GUSBCFG_ULPICSM GUSBCFG_ULPICSM_Msk // ULPI Clock SuspendM */ +#define GUSBCFG_ULPICSM_Msk (0x1UL << GUSBCFG_ULPICSM_Pos) // 0x00080000 +#define GUSBCFG_ULPICSM GUSBCFG_ULPICSM_Msk // ULPI Clock SuspendM #define GUSBCFG_ULPIEVBUSD_Pos (20U) -#define GUSBCFG_ULPIEVBUSD_Msk (0x1UL << GUSBCFG_ULPIEVBUSD_Pos) // 0x00100000 */ -#define GUSBCFG_ULPIEVBUSD GUSBCFG_ULPIEVBUSD_Msk // ULPI External VBUS Drive */ +#define GUSBCFG_ULPIEVBUSD_Msk (0x1UL << GUSBCFG_ULPIEVBUSD_Pos) // 0x00100000 +#define GUSBCFG_ULPIEVBUSD GUSBCFG_ULPIEVBUSD_Msk // ULPI External VBUS Drive #define GUSBCFG_ULPIEVBUSI_Pos (21U) -#define GUSBCFG_ULPIEVBUSI_Msk (0x1UL << GUSBCFG_ULPIEVBUSI_Pos) // 0x00200000 */ -#define GUSBCFG_ULPIEVBUSI GUSBCFG_ULPIEVBUSI_Msk // ULPI external VBUS indicator */ +#define GUSBCFG_ULPIEVBUSI_Msk (0x1UL << GUSBCFG_ULPIEVBUSI_Pos) // 0x00200000 +#define GUSBCFG_ULPIEVBUSI GUSBCFG_ULPIEVBUSI_Msk // ULPI external VBUS indicator #define GUSBCFG_TSDPS_Pos (22U) -#define GUSBCFG_TSDPS_Msk (0x1UL << GUSBCFG_TSDPS_Pos) // 0x00400000 */ -#define GUSBCFG_TSDPS GUSBCFG_TSDPS_Msk // TermSel DLine pulsing selection */ +#define GUSBCFG_TSDPS_Msk (0x1UL << GUSBCFG_TSDPS_Pos) // 0x00400000 +#define GUSBCFG_TSDPS GUSBCFG_TSDPS_Msk // TermSel DLine pulsing selection #define GUSBCFG_PCCI_Pos (23U) -#define GUSBCFG_PCCI_Msk (0x1UL << GUSBCFG_PCCI_Pos) // 0x00800000 */ -#define GUSBCFG_PCCI GUSBCFG_PCCI_Msk // Indicator complement */ +#define GUSBCFG_PCCI_Msk (0x1UL << GUSBCFG_PCCI_Pos) // 0x00800000 +#define GUSBCFG_PCCI GUSBCFG_PCCI_Msk // Indicator complement #define GUSBCFG_PTCI_Pos (24U) -#define GUSBCFG_PTCI_Msk (0x1UL << GUSBCFG_PTCI_Pos) // 0x01000000 */ -#define GUSBCFG_PTCI GUSBCFG_PTCI_Msk // Indicator pass through */ +#define GUSBCFG_PTCI_Msk (0x1UL << GUSBCFG_PTCI_Pos) // 0x01000000 +#define GUSBCFG_PTCI GUSBCFG_PTCI_Msk // Indicator pass through #define GUSBCFG_ULPIIPD_Pos (25U) -#define GUSBCFG_ULPIIPD_Msk (0x1UL << GUSBCFG_ULPIIPD_Pos) // 0x02000000 */ -#define GUSBCFG_ULPIIPD GUSBCFG_ULPIIPD_Msk // ULPI interface protect disable */ +#define GUSBCFG_ULPIIPD_Msk (0x1UL << GUSBCFG_ULPIIPD_Pos) // 0x02000000 +#define GUSBCFG_ULPIIPD GUSBCFG_ULPIIPD_Msk // ULPI interface protect disable #define GUSBCFG_FHMOD_Pos (29U) -#define GUSBCFG_FHMOD_Msk (0x1UL << GUSBCFG_FHMOD_Pos) // 0x20000000 */ -#define GUSBCFG_FHMOD GUSBCFG_FHMOD_Msk // Forced host mode */ +#define GUSBCFG_FHMOD_Msk (0x1UL << GUSBCFG_FHMOD_Pos) // 0x20000000 +#define GUSBCFG_FHMOD GUSBCFG_FHMOD_Msk // Forced host mode #define GUSBCFG_FDMOD_Pos (30U) -#define GUSBCFG_FDMOD_Msk (0x1UL << GUSBCFG_FDMOD_Pos) // 0x40000000 */ -#define GUSBCFG_FDMOD GUSBCFG_FDMOD_Msk // Forced peripheral mode */ +#define GUSBCFG_FDMOD_Msk (0x1UL << GUSBCFG_FDMOD_Pos) // 0x40000000 +#define GUSBCFG_FDMOD GUSBCFG_FDMOD_Msk // Forced peripheral mode #define GUSBCFG_CTXPKT_Pos (31U) -#define GUSBCFG_CTXPKT_Msk (0x1UL << GUSBCFG_CTXPKT_Pos) // 0x80000000 */ -#define GUSBCFG_CTXPKT GUSBCFG_CTXPKT_Msk // Corrupt Tx packet */ +#define GUSBCFG_CTXPKT_Msk (0x1UL << GUSBCFG_CTXPKT_Pos) // 0x80000000 +#define GUSBCFG_CTXPKT GUSBCFG_CTXPKT_Msk // Corrupt Tx packet /******************** Bit definition for GRSTCTL register ********************/ #define GRSTCTL_CSRST_Pos (0U) -#define GRSTCTL_CSRST_Msk (0x1UL << GRSTCTL_CSRST_Pos) // 0x00000001 */ -#define GRSTCTL_CSRST GRSTCTL_CSRST_Msk // Core soft reset */ +#define GRSTCTL_CSRST_Msk (0x1UL << GRSTCTL_CSRST_Pos) // 0x00000001 +#define GRSTCTL_CSRST GRSTCTL_CSRST_Msk // Core soft reset #define GRSTCTL_HSRST_Pos (1U) -#define GRSTCTL_HSRST_Msk (0x1UL << GRSTCTL_HSRST_Pos) // 0x00000002 */ -#define GRSTCTL_HSRST GRSTCTL_HSRST_Msk // HCLK soft reset */ +#define GRSTCTL_HSRST_Msk (0x1UL << GRSTCTL_HSRST_Pos) // 0x00000002 +#define GRSTCTL_HSRST GRSTCTL_HSRST_Msk // HCLK soft reset #define GRSTCTL_FCRST_Pos (2U) -#define GRSTCTL_FCRST_Msk (0x1UL << GRSTCTL_FCRST_Pos) // 0x00000004 */ -#define GRSTCTL_FCRST GRSTCTL_FCRST_Msk // Host frame counter reset */ +#define GRSTCTL_FCRST_Msk (0x1UL << GRSTCTL_FCRST_Pos) // 0x00000004 +#define GRSTCTL_FCRST GRSTCTL_FCRST_Msk // Host frame counter reset #define GRSTCTL_RXFFLSH_Pos (4U) -#define GRSTCTL_RXFFLSH_Msk (0x1UL << GRSTCTL_RXFFLSH_Pos) // 0x00000010 */ -#define GRSTCTL_RXFFLSH GRSTCTL_RXFFLSH_Msk // RxFIFO flush */ +#define GRSTCTL_RXFFLSH_Msk (0x1UL << GRSTCTL_RXFFLSH_Pos) // 0x00000010 +#define GRSTCTL_RXFFLSH GRSTCTL_RXFFLSH_Msk // RxFIFO flush #define GRSTCTL_TXFFLSH_Pos (5U) -#define GRSTCTL_TXFFLSH_Msk (0x1UL << GRSTCTL_TXFFLSH_Pos) // 0x00000020 */ -#define GRSTCTL_TXFFLSH GRSTCTL_TXFFLSH_Msk // TxFIFO flush */ +#define GRSTCTL_TXFFLSH_Msk (0x1UL << GRSTCTL_TXFFLSH_Pos) // 0x00000020 +#define GRSTCTL_TXFFLSH GRSTCTL_TXFFLSH_Msk // TxFIFO flush #define GRSTCTL_TXFNUM_Pos (6U) -#define GRSTCTL_TXFNUM_Msk (0x1FUL << GRSTCTL_TXFNUM_Pos) // 0x000007C0 */ -#define GRSTCTL_TXFNUM GRSTCTL_TXFNUM_Msk // TxFIFO number */ -#define GRSTCTL_TXFNUM_0 (0x01UL << GRSTCTL_TXFNUM_Pos) // 0x00000040 */ -#define GRSTCTL_TXFNUM_1 (0x02UL << GRSTCTL_TXFNUM_Pos) // 0x00000080 */ -#define GRSTCTL_TXFNUM_2 (0x04UL << GRSTCTL_TXFNUM_Pos) // 0x00000100 */ -#define GRSTCTL_TXFNUM_3 (0x08UL << GRSTCTL_TXFNUM_Pos) // 0x00000200 */ -#define GRSTCTL_TXFNUM_4 (0x10UL << GRSTCTL_TXFNUM_Pos) // 0x00000400 */ +#define GRSTCTL_TXFNUM_Msk (0x1FUL << GRSTCTL_TXFNUM_Pos) // 0x000007C0 +#define GRSTCTL_TXFNUM GRSTCTL_TXFNUM_Msk // TxFIFO number +#define GRSTCTL_TXFNUM_0 (0x01UL << GRSTCTL_TXFNUM_Pos) // 0x00000040 +#define GRSTCTL_TXFNUM_1 (0x02UL << GRSTCTL_TXFNUM_Pos) // 0x00000080 +#define GRSTCTL_TXFNUM_2 (0x04UL << GRSTCTL_TXFNUM_Pos) // 0x00000100 +#define GRSTCTL_TXFNUM_3 (0x08UL << GRSTCTL_TXFNUM_Pos) // 0x00000200 +#define GRSTCTL_TXFNUM_4 (0x10UL << GRSTCTL_TXFNUM_Pos) // 0x00000400 #define GRSTCTL_CSFTRST_DONE_Pos (29) #define GRSTCTL_CSFTRST_DONE (1u << GRSTCTL_CSFTRST_DONE_Pos) // Reset Done, only available from v4.20a #define GRSTCTL_DMAREQ_Pos (30U) -#define GRSTCTL_DMAREQ_Msk (0x1UL << GRSTCTL_DMAREQ_Pos) // 0x40000000 */ -#define GRSTCTL_DMAREQ GRSTCTL_DMAREQ_Msk // DMA request signal */ +#define GRSTCTL_DMAREQ_Msk (0x1UL << GRSTCTL_DMAREQ_Pos) // 0x40000000 +#define GRSTCTL_DMAREQ GRSTCTL_DMAREQ_Msk // DMA request signal #define GRSTCTL_AHBIDL_Pos (31U) -#define GRSTCTL_AHBIDL_Msk (0x1UL << GRSTCTL_AHBIDL_Pos) // 0x80000000 */ -#define GRSTCTL_AHBIDL GRSTCTL_AHBIDL_Msk // AHB master idle */ +#define GRSTCTL_AHBIDL_Msk (0x1UL << GRSTCTL_AHBIDL_Pos) // 0x80000000 +#define GRSTCTL_AHBIDL GRSTCTL_AHBIDL_Msk // AHB master idle /******************** Bit definition for DIEPMSK register ********************/ #define DIEPMSK_XFRCM_Pos (0U) -#define DIEPMSK_XFRCM_Msk (0x1UL << DIEPMSK_XFRCM_Pos) // 0x00000001 */ -#define DIEPMSK_XFRCM DIEPMSK_XFRCM_Msk // Transfer completed interrupt mask */ +#define DIEPMSK_XFRCM_Msk (0x1UL << DIEPMSK_XFRCM_Pos) // 0x00000001 +#define DIEPMSK_XFRCM DIEPMSK_XFRCM_Msk // Transfer completed interrupt mask #define DIEPMSK_EPDM_Pos (1U) -#define DIEPMSK_EPDM_Msk (0x1UL << DIEPMSK_EPDM_Pos) // 0x00000002 */ -#define DIEPMSK_EPDM DIEPMSK_EPDM_Msk // Endpoint disabled interrupt mask */ +#define DIEPMSK_EPDM_Msk (0x1UL << DIEPMSK_EPDM_Pos) // 0x00000002 +#define DIEPMSK_EPDM DIEPMSK_EPDM_Msk // Endpoint disabled interrupt mask #define DIEPMSK_TOM_Pos (3U) -#define DIEPMSK_TOM_Msk (0x1UL << DIEPMSK_TOM_Pos) // 0x00000008 */ -#define DIEPMSK_TOM DIEPMSK_TOM_Msk // Timeout condition mask (nonisochronous endpoints) */ +#define DIEPMSK_TOM_Msk (0x1UL << DIEPMSK_TOM_Pos) // 0x00000008 +#define DIEPMSK_TOM DIEPMSK_TOM_Msk // Timeout condition mask (nonisochronous endpoints) #define DIEPMSK_ITTXFEMSK_Pos (4U) -#define DIEPMSK_ITTXFEMSK_Msk (0x1UL << DIEPMSK_ITTXFEMSK_Pos) // 0x00000010 */ -#define DIEPMSK_ITTXFEMSK DIEPMSK_ITTXFEMSK_Msk // IN token received when TxFIFO empty mask */ +#define DIEPMSK_ITTXFEMSK_Msk (0x1UL << DIEPMSK_ITTXFEMSK_Pos) // 0x00000010 +#define DIEPMSK_ITTXFEMSK DIEPMSK_ITTXFEMSK_Msk // IN token received when TxFIFO empty mask #define DIEPMSK_INEPNMM_Pos (5U) -#define DIEPMSK_INEPNMM_Msk (0x1UL << DIEPMSK_INEPNMM_Pos) // 0x00000020 */ -#define DIEPMSK_INEPNMM DIEPMSK_INEPNMM_Msk // IN token received with EP mismatch mask */ +#define DIEPMSK_INEPNMM_Msk (0x1UL << DIEPMSK_INEPNMM_Pos) // 0x00000020 +#define DIEPMSK_INEPNMM DIEPMSK_INEPNMM_Msk // IN token received with EP mismatch mask #define DIEPMSK_INEPNEM_Pos (6U) -#define DIEPMSK_INEPNEM_Msk (0x1UL << DIEPMSK_INEPNEM_Pos) // 0x00000040 */ -#define DIEPMSK_INEPNEM DIEPMSK_INEPNEM_Msk // IN endpoint NAK effective mask */ +#define DIEPMSK_INEPNEM_Msk (0x1UL << DIEPMSK_INEPNEM_Pos) // 0x00000040 +#define DIEPMSK_INEPNEM DIEPMSK_INEPNEM_Msk // IN endpoint NAK effective mask #define DIEPMSK_TXFURM_Pos (8U) -#define DIEPMSK_TXFURM_Msk (0x1UL << DIEPMSK_TXFURM_Pos) // 0x00000100 */ -#define DIEPMSK_TXFURM DIEPMSK_TXFURM_Msk // FIFO underrun mask */ +#define DIEPMSK_TXFURM_Msk (0x1UL << DIEPMSK_TXFURM_Pos) // 0x00000100 +#define DIEPMSK_TXFURM DIEPMSK_TXFURM_Msk // FIFO underrun mask #define DIEPMSK_BIM_Pos (9U) -#define DIEPMSK_BIM_Msk (0x1UL << DIEPMSK_BIM_Pos) // 0x00000200 */ -#define DIEPMSK_BIM DIEPMSK_BIM_Msk // BNA interrupt mask */ +#define DIEPMSK_BIM_Msk (0x1UL << DIEPMSK_BIM_Pos) // 0x00000200 +#define DIEPMSK_BIM DIEPMSK_BIM_Msk // BNA interrupt mask /******************** Bit definition for HPTXSTS register ********************/ #define HPTXSTS_PTXFSAVL_Pos (0U) -#define HPTXSTS_PTXFSAVL_Msk (0xFFFFUL << HPTXSTS_PTXFSAVL_Pos) // 0x0000FFFF */ -#define HPTXSTS_PTXFSAVL HPTXSTS_PTXFSAVL_Msk // Periodic transmit data FIFO space available */ +#define HPTXSTS_PTXFSAVL_Msk (0xFFFFUL << HPTXSTS_PTXFSAVL_Pos) // 0x0000FFFF +#define HPTXSTS_PTXFSAVL HPTXSTS_PTXFSAVL_Msk // Periodic transmit data FIFO space available #define HPTXSTS_PTXQSAV_Pos (16U) -#define HPTXSTS_PTXQSAV_Msk (0xFFUL << HPTXSTS_PTXQSAV_Pos) // 0x00FF0000 */ -#define HPTXSTS_PTXQSAV HPTXSTS_PTXQSAV_Msk // Periodic transmit request queue space available */ -#define HPTXSTS_PTXQSAV_0 (0x01UL << HPTXSTS_PTXQSAV_Pos) // 0x00010000 */ -#define HPTXSTS_PTXQSAV_1 (0x02UL << HPTXSTS_PTXQSAV_Pos) // 0x00020000 */ -#define HPTXSTS_PTXQSAV_2 (0x04UL << HPTXSTS_PTXQSAV_Pos) // 0x00040000 */ -#define HPTXSTS_PTXQSAV_3 (0x08UL << HPTXSTS_PTXQSAV_Pos) // 0x00080000 */ -#define HPTXSTS_PTXQSAV_4 (0x10UL << HPTXSTS_PTXQSAV_Pos) // 0x00100000 */ -#define HPTXSTS_PTXQSAV_5 (0x20UL << HPTXSTS_PTXQSAV_Pos) // 0x00200000 */ -#define HPTXSTS_PTXQSAV_6 (0x40UL << HPTXSTS_PTXQSAV_Pos) // 0x00400000 */ -#define HPTXSTS_PTXQSAV_7 (0x80UL << HPTXSTS_PTXQSAV_Pos) // 0x00800000 */ +#define HPTXSTS_PTXQSAV_Msk (0xFFUL << HPTXSTS_PTXQSAV_Pos) // 0x00FF0000 +#define HPTXSTS_PTXQSAV HPTXSTS_PTXQSAV_Msk // Periodic transmit request queue space available +#define HPTXSTS_PTXQSAV_0 (0x01UL << HPTXSTS_PTXQSAV_Pos) // 0x00010000 +#define HPTXSTS_PTXQSAV_1 (0x02UL << HPTXSTS_PTXQSAV_Pos) // 0x00020000 +#define HPTXSTS_PTXQSAV_2 (0x04UL << HPTXSTS_PTXQSAV_Pos) // 0x00040000 +#define HPTXSTS_PTXQSAV_3 (0x08UL << HPTXSTS_PTXQSAV_Pos) // 0x00080000 +#define HPTXSTS_PTXQSAV_4 (0x10UL << HPTXSTS_PTXQSAV_Pos) // 0x00100000 +#define HPTXSTS_PTXQSAV_5 (0x20UL << HPTXSTS_PTXQSAV_Pos) // 0x00200000 +#define HPTXSTS_PTXQSAV_6 (0x40UL << HPTXSTS_PTXQSAV_Pos) // 0x00400000 +#define HPTXSTS_PTXQSAV_7 (0x80UL << HPTXSTS_PTXQSAV_Pos) // 0x00800000 #define HPTXSTS_PTXQTOP_Pos (24U) -#define HPTXSTS_PTXQTOP_Msk (0xFFUL << HPTXSTS_PTXQTOP_Pos) // 0xFF000000 */ -#define HPTXSTS_PTXQTOP HPTXSTS_PTXQTOP_Msk // Top of the periodic transmit request queue */ -#define HPTXSTS_PTXQTOP_0 (0x01UL << HPTXSTS_PTXQTOP_Pos) // 0x01000000 */ -#define HPTXSTS_PTXQTOP_1 (0x02UL << HPTXSTS_PTXQTOP_Pos) // 0x02000000 */ -#define HPTXSTS_PTXQTOP_2 (0x04UL << HPTXSTS_PTXQTOP_Pos) // 0x04000000 */ -#define HPTXSTS_PTXQTOP_3 (0x08UL << HPTXSTS_PTXQTOP_Pos) // 0x08000000 */ -#define HPTXSTS_PTXQTOP_4 (0x10UL << HPTXSTS_PTXQTOP_Pos) // 0x10000000 */ -#define HPTXSTS_PTXQTOP_5 (0x20UL << HPTXSTS_PTXQTOP_Pos) // 0x20000000 */ -#define HPTXSTS_PTXQTOP_6 (0x40UL << HPTXSTS_PTXQTOP_Pos) // 0x40000000 */ -#define HPTXSTS_PTXQTOP_7 (0x80UL << HPTXSTS_PTXQTOP_Pos) // 0x80000000 */ +#define HPTXSTS_PTXQTOP_Msk (0xFFUL << HPTXSTS_PTXQTOP_Pos) // 0xFF000000 +#define HPTXSTS_PTXQTOP HPTXSTS_PTXQTOP_Msk // Top of the periodic transmit request queue +#define HPTXSTS_PTXQTOP_0 (0x01UL << HPTXSTS_PTXQTOP_Pos) // 0x01000000 +#define HPTXSTS_PTXQTOP_1 (0x02UL << HPTXSTS_PTXQTOP_Pos) // 0x02000000 +#define HPTXSTS_PTXQTOP_2 (0x04UL << HPTXSTS_PTXQTOP_Pos) // 0x04000000 +#define HPTXSTS_PTXQTOP_3 (0x08UL << HPTXSTS_PTXQTOP_Pos) // 0x08000000 +#define HPTXSTS_PTXQTOP_4 (0x10UL << HPTXSTS_PTXQTOP_Pos) // 0x10000000 +#define HPTXSTS_PTXQTOP_5 (0x20UL << HPTXSTS_PTXQTOP_Pos) // 0x20000000 +#define HPTXSTS_PTXQTOP_6 (0x40UL << HPTXSTS_PTXQTOP_Pos) // 0x40000000 +#define HPTXSTS_PTXQTOP_7 (0x80UL << HPTXSTS_PTXQTOP_Pos) // 0x80000000 /******************** Bit definition for HAINT register ********************/ #define HAINT_HAINT_Pos (0U) -#define HAINT_HAINT_Msk (0xFFFFUL << HAINT_HAINT_Pos) // 0x0000FFFF */ -#define HAINT_HAINT HAINT_HAINT_Msk // Channel interrupts */ +#define HAINT_HAINT_Msk (0xFFFFUL << HAINT_HAINT_Pos) // 0x0000FFFF +#define HAINT_HAINT HAINT_HAINT_Msk // Channel interrupts /******************** Bit definition for DOEPMSK register ********************/ #define DOEPMSK_XFRCM_Pos (0U) -#define DOEPMSK_XFRCM_Msk (0x1UL << DOEPMSK_XFRCM_Pos) // 0x00000001 */ -#define DOEPMSK_XFRCM DOEPMSK_XFRCM_Msk // Transfer completed interrupt mask */ +#define DOEPMSK_XFRCM_Msk (0x1UL << DOEPMSK_XFRCM_Pos) // 0x00000001 +#define DOEPMSK_XFRCM DOEPMSK_XFRCM_Msk // Transfer completed interrupt mask #define DOEPMSK_EPDM_Pos (1U) -#define DOEPMSK_EPDM_Msk (0x1UL << DOEPMSK_EPDM_Pos) // 0x00000002 */ -#define DOEPMSK_EPDM DOEPMSK_EPDM_Msk // Endpoint disabled interrupt mask */ +#define DOEPMSK_EPDM_Msk (0x1UL << DOEPMSK_EPDM_Pos) // 0x00000002 +#define DOEPMSK_EPDM DOEPMSK_EPDM_Msk // Endpoint disabled interrupt mask #define DOEPMSK_AHBERRM_Pos (2U) -#define DOEPMSK_AHBERRM_Msk (0x1UL << DOEPMSK_AHBERRM_Pos) // 0x00000004 */ -#define DOEPMSK_AHBERRM DOEPMSK_AHBERRM_Msk // OUT transaction AHB Error interrupt mask */ +#define DOEPMSK_AHBERRM_Msk (0x1UL << DOEPMSK_AHBERRM_Pos) // 0x00000004 +#define DOEPMSK_AHBERRM DOEPMSK_AHBERRM_Msk // OUT transaction AHB Error interrupt mask #define DOEPMSK_STUPM_Pos (3U) -#define DOEPMSK_STUPM_Msk (0x1UL << DOEPMSK_STUPM_Pos) // 0x00000008 */ -#define DOEPMSK_STUPM DOEPMSK_STUPM_Msk // SETUP phase done mask */ +#define DOEPMSK_STUPM_Msk (0x1UL << DOEPMSK_STUPM_Pos) // 0x00000008 +#define DOEPMSK_STUPM DOEPMSK_STUPM_Msk // SETUP phase done mask #define DOEPMSK_OTEPDM_Pos (4U) -#define DOEPMSK_OTEPDM_Msk (0x1UL << DOEPMSK_OTEPDM_Pos) // 0x00000010 */ -#define DOEPMSK_OTEPDM DOEPMSK_OTEPDM_Msk // OUT token received when endpoint disabled mask */ +#define DOEPMSK_OTEPDM_Msk (0x1UL << DOEPMSK_OTEPDM_Pos) // 0x00000010 +#define DOEPMSK_OTEPDM DOEPMSK_OTEPDM_Msk // OUT token received when endpoint disabled mask #define DOEPMSK_OTEPSPRM_Pos (5U) -#define DOEPMSK_OTEPSPRM_Msk (0x1UL << DOEPMSK_OTEPSPRM_Pos) // 0x00000020 */ -#define DOEPMSK_OTEPSPRM DOEPMSK_OTEPSPRM_Msk // Status Phase Received mask */ +#define DOEPMSK_OTEPSPRM_Msk (0x1UL << DOEPMSK_OTEPSPRM_Pos) // 0x00000020 +#define DOEPMSK_OTEPSPRM DOEPMSK_OTEPSPRM_Msk // Status Phase Received mask #define DOEPMSK_B2BSTUP_Pos (6U) -#define DOEPMSK_B2BSTUP_Msk (0x1UL << DOEPMSK_B2BSTUP_Pos) // 0x00000040 */ -#define DOEPMSK_B2BSTUP DOEPMSK_B2BSTUP_Msk // Back-to-back SETUP packets received mask */ +#define DOEPMSK_B2BSTUP_Msk (0x1UL << DOEPMSK_B2BSTUP_Pos) // 0x00000040 +#define DOEPMSK_B2BSTUP DOEPMSK_B2BSTUP_Msk // Back-to-back SETUP packets received mask #define DOEPMSK_OPEM_Pos (8U) -#define DOEPMSK_OPEM_Msk (0x1UL << DOEPMSK_OPEM_Pos) // 0x00000100 */ -#define DOEPMSK_OPEM DOEPMSK_OPEM_Msk // OUT packet error mask */ +#define DOEPMSK_OPEM_Msk (0x1UL << DOEPMSK_OPEM_Pos) // 0x00000100 +#define DOEPMSK_OPEM DOEPMSK_OPEM_Msk // OUT packet error mask #define DOEPMSK_BOIM_Pos (9U) -#define DOEPMSK_BOIM_Msk (0x1UL << DOEPMSK_BOIM_Pos) // 0x00000200 */ -#define DOEPMSK_BOIM DOEPMSK_BOIM_Msk // BNA interrupt mask */ +#define DOEPMSK_BOIM_Msk (0x1UL << DOEPMSK_BOIM_Pos) // 0x00000200 +#define DOEPMSK_BOIM DOEPMSK_BOIM_Msk // BNA interrupt mask #define DOEPMSK_BERRM_Pos (12U) -#define DOEPMSK_BERRM_Msk (0x1UL << DOEPMSK_BERRM_Pos) // 0x00001000 */ -#define DOEPMSK_BERRM DOEPMSK_BERRM_Msk // Babble error interrupt mask */ +#define DOEPMSK_BERRM_Msk (0x1UL << DOEPMSK_BERRM_Pos) // 0x00001000 +#define DOEPMSK_BERRM DOEPMSK_BERRM_Msk // Babble error interrupt mask #define DOEPMSK_NAKM_Pos (13U) -#define DOEPMSK_NAKM_Msk (0x1UL << DOEPMSK_NAKM_Pos) // 0x00002000 */ -#define DOEPMSK_NAKM DOEPMSK_NAKM_Msk // OUT Packet NAK interrupt mask */ +#define DOEPMSK_NAKM_Msk (0x1UL << DOEPMSK_NAKM_Pos) // 0x00002000 +#define DOEPMSK_NAKM DOEPMSK_NAKM_Msk // OUT Packet NAK interrupt mask #define DOEPMSK_NYETM_Pos (14U) -#define DOEPMSK_NYETM_Msk (0x1UL << DOEPMSK_NYETM_Pos) // 0x00004000 */ -#define DOEPMSK_NYETM DOEPMSK_NYETM_Msk // NYET interrupt mask */ +#define DOEPMSK_NYETM_Msk (0x1UL << DOEPMSK_NYETM_Pos) // 0x00004000 +#define DOEPMSK_NYETM DOEPMSK_NYETM_Msk // NYET interrupt mask /******************** Bit definition for GINTSTS register ********************/ #define GINTSTS_CMOD_Pos (0U) -#define GINTSTS_CMOD_Msk (0x1UL << GINTSTS_CMOD_Pos) // 0x00000001 */ -#define GINTSTS_CMOD GINTSTS_CMOD_Msk // Current mode of operation */ +#define GINTSTS_CMOD_Msk (0x1UL << GINTSTS_CMOD_Pos) // 0x00000001 +#define GINTSTS_CMOD GINTSTS_CMOD_Msk // Current mode of operation #define GINTSTS_MMIS_Pos (1U) -#define GINTSTS_MMIS_Msk (0x1UL << GINTSTS_MMIS_Pos) // 0x00000002 */ -#define GINTSTS_MMIS GINTSTS_MMIS_Msk // Mode mismatch interrupt */ +#define GINTSTS_MMIS_Msk (0x1UL << GINTSTS_MMIS_Pos) // 0x00000002 +#define GINTSTS_MMIS GINTSTS_MMIS_Msk // Mode mismatch interrupt #define GINTSTS_OTGINT_Pos (2U) -#define GINTSTS_OTGINT_Msk (0x1UL << GINTSTS_OTGINT_Pos) // 0x00000004 */ -#define GINTSTS_OTGINT GINTSTS_OTGINT_Msk // OTG interrupt */ +#define GINTSTS_OTGINT_Msk (0x1UL << GINTSTS_OTGINT_Pos) // 0x00000004 +#define GINTSTS_OTGINT GINTSTS_OTGINT_Msk // OTG interrupt #define GINTSTS_SOF_Pos (3U) -#define GINTSTS_SOF_Msk (0x1UL << GINTSTS_SOF_Pos) // 0x00000008 */ -#define GINTSTS_SOF GINTSTS_SOF_Msk // Start of frame */ +#define GINTSTS_SOF_Msk (0x1UL << GINTSTS_SOF_Pos) // 0x00000008 +#define GINTSTS_SOF GINTSTS_SOF_Msk // Start of frame #define GINTSTS_RXFLVL_Pos (4U) -#define GINTSTS_RXFLVL_Msk (0x1UL << GINTSTS_RXFLVL_Pos) // 0x00000010 */ -#define GINTSTS_RXFLVL GINTSTS_RXFLVL_Msk // RxFIFO nonempty */ +#define GINTSTS_RXFLVL_Msk (0x1UL << GINTSTS_RXFLVL_Pos) // 0x00000010 +#define GINTSTS_RXFLVL GINTSTS_RXFLVL_Msk // RxFIFO nonempty #define GINTSTS_NPTXFE_Pos (5U) -#define GINTSTS_NPTXFE_Msk (0x1UL << GINTSTS_NPTXFE_Pos) // 0x00000020 */ -#define GINTSTS_NPTXFE GINTSTS_NPTXFE_Msk // Nonperiodic TxFIFO empty */ +#define GINTSTS_NPTXFE_Msk (0x1UL << GINTSTS_NPTXFE_Pos) // 0x00000020 +#define GINTSTS_NPTXFE GINTSTS_NPTXFE_Msk // Nonperiodic TxFIFO empty #define GINTSTS_GINAKEFF_Pos (6U) -#define GINTSTS_GINAKEFF_Msk (0x1UL << GINTSTS_GINAKEFF_Pos) // 0x00000040 */ -#define GINTSTS_GINAKEFF GINTSTS_GINAKEFF_Msk // Global IN nonperiodic NAK effective */ +#define GINTSTS_GINAKEFF_Msk (0x1UL << GINTSTS_GINAKEFF_Pos) // 0x00000040 +#define GINTSTS_GINAKEFF GINTSTS_GINAKEFF_Msk // Global IN nonperiodic NAK effective #define GINTSTS_BOUTNAKEFF_Pos (7U) -#define GINTSTS_BOUTNAKEFF_Msk (0x1UL << GINTSTS_BOUTNAKEFF_Pos) // 0x00000080 */ -#define GINTSTS_BOUTNAKEFF GINTSTS_BOUTNAKEFF_Msk // Global OUT NAK effective */ +#define GINTSTS_BOUTNAKEFF_Msk (0x1UL << GINTSTS_BOUTNAKEFF_Pos) // 0x00000080 +#define GINTSTS_BOUTNAKEFF GINTSTS_BOUTNAKEFF_Msk // Global OUT NAK effective #define GINTSTS_ESUSP_Pos (10U) -#define GINTSTS_ESUSP_Msk (0x1UL << GINTSTS_ESUSP_Pos) // 0x00000400 */ -#define GINTSTS_ESUSP GINTSTS_ESUSP_Msk // Early suspend */ +#define GINTSTS_ESUSP_Msk (0x1UL << GINTSTS_ESUSP_Pos) // 0x00000400 +#define GINTSTS_ESUSP GINTSTS_ESUSP_Msk // Early suspend #define GINTSTS_USBSUSP_Pos (11U) -#define GINTSTS_USBSUSP_Msk (0x1UL << GINTSTS_USBSUSP_Pos) // 0x00000800 */ -#define GINTSTS_USBSUSP GINTSTS_USBSUSP_Msk // USB suspend */ +#define GINTSTS_USBSUSP_Msk (0x1UL << GINTSTS_USBSUSP_Pos) // 0x00000800 +#define GINTSTS_USBSUSP GINTSTS_USBSUSP_Msk // USB suspend #define GINTSTS_USBRST_Pos (12U) -#define GINTSTS_USBRST_Msk (0x1UL << GINTSTS_USBRST_Pos) // 0x00001000 */ -#define GINTSTS_USBRST GINTSTS_USBRST_Msk // USB reset */ +#define GINTSTS_USBRST_Msk (0x1UL << GINTSTS_USBRST_Pos) // 0x00001000 +#define GINTSTS_USBRST GINTSTS_USBRST_Msk // USB reset #define GINTSTS_ENUMDNE_Pos (13U) -#define GINTSTS_ENUMDNE_Msk (0x1UL << GINTSTS_ENUMDNE_Pos) // 0x00002000 */ -#define GINTSTS_ENUMDNE GINTSTS_ENUMDNE_Msk // Enumeration done */ +#define GINTSTS_ENUMDNE_Msk (0x1UL << GINTSTS_ENUMDNE_Pos) // 0x00002000 +#define GINTSTS_ENUMDNE GINTSTS_ENUMDNE_Msk // Enumeration done #define GINTSTS_ISOODRP_Pos (14U) -#define GINTSTS_ISOODRP_Msk (0x1UL << GINTSTS_ISOODRP_Pos) // 0x00004000 */ -#define GINTSTS_ISOODRP GINTSTS_ISOODRP_Msk // Isochronous OUT packet dropped interrupt */ +#define GINTSTS_ISOODRP_Msk (0x1UL << GINTSTS_ISOODRP_Pos) // 0x00004000 +#define GINTSTS_ISOODRP GINTSTS_ISOODRP_Msk // Isochronous OUT packet dropped interrupt #define GINTSTS_EOPF_Pos (15U) -#define GINTSTS_EOPF_Msk (0x1UL << GINTSTS_EOPF_Pos) // 0x00008000 */ -#define GINTSTS_EOPF GINTSTS_EOPF_Msk // End of periodic frame interrupt */ +#define GINTSTS_EOPF_Msk (0x1UL << GINTSTS_EOPF_Pos) // 0x00008000 +#define GINTSTS_EOPF GINTSTS_EOPF_Msk // End of periodic frame interrupt #define GINTSTS_IEPINT_Pos (18U) -#define GINTSTS_IEPINT_Msk (0x1UL << GINTSTS_IEPINT_Pos) // 0x00040000 */ -#define GINTSTS_IEPINT GINTSTS_IEPINT_Msk // IN endpoint interrupt */ +#define GINTSTS_IEPINT_Msk (0x1UL << GINTSTS_IEPINT_Pos) // 0x00040000 +#define GINTSTS_IEPINT GINTSTS_IEPINT_Msk // IN endpoint interrupt #define GINTSTS_OEPINT_Pos (19U) -#define GINTSTS_OEPINT_Msk (0x1UL << GINTSTS_OEPINT_Pos) // 0x00080000 */ -#define GINTSTS_OEPINT GINTSTS_OEPINT_Msk // OUT endpoint interrupt */ +#define GINTSTS_OEPINT_Msk (0x1UL << GINTSTS_OEPINT_Pos) // 0x00080000 +#define GINTSTS_OEPINT GINTSTS_OEPINT_Msk // OUT endpoint interrupt #define GINTSTS_IISOIXFR_Pos (20U) -#define GINTSTS_IISOIXFR_Msk (0x1UL << GINTSTS_IISOIXFR_Pos) // 0x00100000 */ -#define GINTSTS_IISOIXFR GINTSTS_IISOIXFR_Msk // Incomplete isochronous IN transfer */ +#define GINTSTS_IISOIXFR_Msk (0x1UL << GINTSTS_IISOIXFR_Pos) // 0x00100000 +#define GINTSTS_IISOIXFR GINTSTS_IISOIXFR_Msk // Incomplete isochronous IN transfer #define GINTSTS_PXFR_INCOMPISOOUT_Pos (21U) -#define GINTSTS_PXFR_INCOMPISOOUT_Msk (0x1UL << GINTSTS_PXFR_INCOMPISOOUT_Pos) // 0x00200000 */ -#define GINTSTS_PXFR_INCOMPISOOUT GINTSTS_PXFR_INCOMPISOOUT_Msk // Incomplete periodic transfer */ +#define GINTSTS_PXFR_INCOMPISOOUT_Msk (0x1UL << GINTSTS_PXFR_INCOMPISOOUT_Pos) // 0x00200000 +#define GINTSTS_PXFR_INCOMPISOOUT GINTSTS_PXFR_INCOMPISOOUT_Msk // Incomplete periodic transfer #define GINTSTS_DATAFSUSP_Pos (22U) -#define GINTSTS_DATAFSUSP_Msk (0x1UL << GINTSTS_DATAFSUSP_Pos) // 0x00400000 */ -#define GINTSTS_DATAFSUSP GINTSTS_DATAFSUSP_Msk // Data fetch suspended */ +#define GINTSTS_DATAFSUSP_Msk (0x1UL << GINTSTS_DATAFSUSP_Pos) // 0x00400000 +#define GINTSTS_DATAFSUSP GINTSTS_DATAFSUSP_Msk // Data fetch suspended #define GINTSTS_RSTDET_Pos (23U) -#define GINTSTS_RSTDET_Msk (0x1UL << GINTSTS_RSTDET_Pos) // 0x00800000 */ -#define GINTSTS_RSTDET GINTSTS_RSTDET_Msk // Reset detected interrupt */ +#define GINTSTS_RSTDET_Msk (0x1UL << GINTSTS_RSTDET_Pos) // 0x00800000 +#define GINTSTS_RSTDET GINTSTS_RSTDET_Msk // Reset detected interrupt #define GINTSTS_HPRTINT_Pos (24U) -#define GINTSTS_HPRTINT_Msk (0x1UL << GINTSTS_HPRTINT_Pos) // 0x01000000 */ -#define GINTSTS_HPRTINT GINTSTS_HPRTINT_Msk // Host port interrupt */ +#define GINTSTS_HPRTINT_Msk (0x1UL << GINTSTS_HPRTINT_Pos) // 0x01000000 +#define GINTSTS_HPRTINT GINTSTS_HPRTINT_Msk // Host port interrupt #define GINTSTS_HCINT_Pos (25U) -#define GINTSTS_HCINT_Msk (0x1UL << GINTSTS_HCINT_Pos) // 0x02000000 */ -#define GINTSTS_HCINT GINTSTS_HCINT_Msk // Host channels interrupt */ +#define GINTSTS_HCINT_Msk (0x1UL << GINTSTS_HCINT_Pos) // 0x02000000 +#define GINTSTS_HCINT GINTSTS_HCINT_Msk // Host channels interrupt #define GINTSTS_PTXFE_Pos (26U) -#define GINTSTS_PTXFE_Msk (0x1UL << GINTSTS_PTXFE_Pos) // 0x04000000 */ -#define GINTSTS_PTXFE GINTSTS_PTXFE_Msk // Periodic TxFIFO empty */ +#define GINTSTS_PTXFE_Msk (0x1UL << GINTSTS_PTXFE_Pos) // 0x04000000 +#define GINTSTS_PTXFE GINTSTS_PTXFE_Msk // Periodic TxFIFO empty #define GINTSTS_LPMINT_Pos (27U) -#define GINTSTS_LPMINT_Msk (0x1UL << GINTSTS_LPMINT_Pos) // 0x08000000 */ -#define GINTSTS_LPMINT GINTSTS_LPMINT_Msk // LPM interrupt */ +#define GINTSTS_LPMINT_Msk (0x1UL << GINTSTS_LPMINT_Pos) // 0x08000000 +#define GINTSTS_LPMINT GINTSTS_LPMINT_Msk // LPM interrupt #define GINTSTS_CIDSCHG_Pos (28U) -#define GINTSTS_CIDSCHG_Msk (0x1UL << GINTSTS_CIDSCHG_Pos) // 0x10000000 */ -#define GINTSTS_CIDSCHG GINTSTS_CIDSCHG_Msk // Connector ID status change */ +#define GINTSTS_CIDSCHG_Msk (0x1UL << GINTSTS_CIDSCHG_Pos) // 0x10000000 +#define GINTSTS_CIDSCHG GINTSTS_CIDSCHG_Msk // Connector ID status change #define GINTSTS_DISCINT_Pos (29U) -#define GINTSTS_DISCINT_Msk (0x1UL << GINTSTS_DISCINT_Pos) // 0x20000000 */ -#define GINTSTS_DISCINT GINTSTS_DISCINT_Msk // Disconnect detected interrupt */ +#define GINTSTS_DISCINT_Msk (0x1UL << GINTSTS_DISCINT_Pos) // 0x20000000 +#define GINTSTS_DISCINT GINTSTS_DISCINT_Msk // Disconnect detected interrupt #define GINTSTS_SRQINT_Pos (30U) -#define GINTSTS_SRQINT_Msk (0x1UL << GINTSTS_SRQINT_Pos) // 0x40000000 */ -#define GINTSTS_SRQINT GINTSTS_SRQINT_Msk // Session request/new session detected interrupt */ +#define GINTSTS_SRQINT_Msk (0x1UL << GINTSTS_SRQINT_Pos) // 0x40000000 +#define GINTSTS_SRQINT GINTSTS_SRQINT_Msk // Session request/new session detected interrupt #define GINTSTS_WKUINT_Pos (31U) -#define GINTSTS_WKUINT_Msk (0x1UL << GINTSTS_WKUINT_Pos) // 0x80000000 */ -#define GINTSTS_WKUINT GINTSTS_WKUINT_Msk // Resume/remote wakeup detected interrupt */ +#define GINTSTS_WKUINT_Msk (0x1UL << GINTSTS_WKUINT_Pos) // 0x80000000 +#define GINTSTS_WKUINT GINTSTS_WKUINT_Msk // Resume/remote wakeup detected interrupt /******************** Bit definition for GINTMSK register ********************/ #define GINTMSK_MMISM_Pos (1U) -#define GINTMSK_MMISM_Msk (0x1UL << GINTMSK_MMISM_Pos) // 0x00000002 */ -#define GINTMSK_MMISM GINTMSK_MMISM_Msk // Mode mismatch interrupt mask */ +#define GINTMSK_MMISM_Msk (0x1UL << GINTMSK_MMISM_Pos) // 0x00000002 +#define GINTMSK_MMISM GINTMSK_MMISM_Msk // Mode mismatch interrupt mask #define GINTMSK_OTGINT_Pos (2U) -#define GINTMSK_OTGINT_Msk (0x1UL << GINTMSK_OTGINT_Pos) // 0x00000004 */ -#define GINTMSK_OTGINT GINTMSK_OTGINT_Msk // OTG interrupt mask */ +#define GINTMSK_OTGINT_Msk (0x1UL << GINTMSK_OTGINT_Pos) // 0x00000004 +#define GINTMSK_OTGINT GINTMSK_OTGINT_Msk // OTG interrupt mask #define GINTMSK_SOFM_Pos (3U) -#define GINTMSK_SOFM_Msk (0x1UL << GINTMSK_SOFM_Pos) // 0x00000008 */ -#define GINTMSK_SOFM GINTMSK_SOFM_Msk // Start of frame mask */ +#define GINTMSK_SOFM_Msk (0x1UL << GINTMSK_SOFM_Pos) // 0x00000008 +#define GINTMSK_SOFM GINTMSK_SOFM_Msk // Start of frame mask #define GINTMSK_RXFLVLM_Pos (4U) -#define GINTMSK_RXFLVLM_Msk (0x1UL << GINTMSK_RXFLVLM_Pos) // 0x00000010 */ -#define GINTMSK_RXFLVLM GINTMSK_RXFLVLM_Msk // Receive FIFO nonempty mask */ +#define GINTMSK_RXFLVLM_Msk (0x1UL << GINTMSK_RXFLVLM_Pos) // 0x00000010 +#define GINTMSK_RXFLVLM GINTMSK_RXFLVLM_Msk // Receive FIFO nonempty mask #define GINTMSK_NPTXFEM_Pos (5U) -#define GINTMSK_NPTXFEM_Msk (0x1UL << GINTMSK_NPTXFEM_Pos) // 0x00000020 */ -#define GINTMSK_NPTXFEM GINTMSK_NPTXFEM_Msk // Nonperiodic TxFIFO empty mask */ +#define GINTMSK_NPTXFEM_Msk (0x1UL << GINTMSK_NPTXFEM_Pos) // 0x00000020 +#define GINTMSK_NPTXFEM GINTMSK_NPTXFEM_Msk // Nonperiodic TxFIFO empty mask #define GINTMSK_GINAKEFFM_Pos (6U) -#define GINTMSK_GINAKEFFM_Msk (0x1UL << GINTMSK_GINAKEFFM_Pos) // 0x00000040 */ -#define GINTMSK_GINAKEFFM GINTMSK_GINAKEFFM_Msk // Global nonperiodic IN NAK effective mask */ +#define GINTMSK_GINAKEFFM_Msk (0x1UL << GINTMSK_GINAKEFFM_Pos) // 0x00000040 +#define GINTMSK_GINAKEFFM GINTMSK_GINAKEFFM_Msk // Global nonperiodic IN NAK effective mask #define GINTMSK_GONAKEFFM_Pos (7U) -#define GINTMSK_GONAKEFFM_Msk (0x1UL << GINTMSK_GONAKEFFM_Pos) // 0x00000080 */ -#define GINTMSK_GONAKEFFM GINTMSK_GONAKEFFM_Msk // Global OUT NAK effective mask */ +#define GINTMSK_GONAKEFFM_Msk (0x1UL << GINTMSK_GONAKEFFM_Pos) // 0x00000080 +#define GINTMSK_GONAKEFFM GINTMSK_GONAKEFFM_Msk // Global OUT NAK effective mask #define GINTMSK_ESUSPM_Pos (10U) -#define GINTMSK_ESUSPM_Msk (0x1UL << GINTMSK_ESUSPM_Pos) // 0x00000400 */ -#define GINTMSK_ESUSPM GINTMSK_ESUSPM_Msk // Early suspend mask */ +#define GINTMSK_ESUSPM_Msk (0x1UL << GINTMSK_ESUSPM_Pos) // 0x00000400 +#define GINTMSK_ESUSPM GINTMSK_ESUSPM_Msk // Early suspend mask #define GINTMSK_USBSUSPM_Pos (11U) -#define GINTMSK_USBSUSPM_Msk (0x1UL << GINTMSK_USBSUSPM_Pos) // 0x00000800 */ -#define GINTMSK_USBSUSPM GINTMSK_USBSUSPM_Msk // USB suspend mask */ +#define GINTMSK_USBSUSPM_Msk (0x1UL << GINTMSK_USBSUSPM_Pos) // 0x00000800 +#define GINTMSK_USBSUSPM GINTMSK_USBSUSPM_Msk // USB suspend mask #define GINTMSK_USBRST_Pos (12U) -#define GINTMSK_USBRST_Msk (0x1UL << GINTMSK_USBRST_Pos) // 0x00001000 */ -#define GINTMSK_USBRST GINTMSK_USBRST_Msk // USB reset mask */ +#define GINTMSK_USBRST_Msk (0x1UL << GINTMSK_USBRST_Pos) // 0x00001000 +#define GINTMSK_USBRST GINTMSK_USBRST_Msk // USB reset mask #define GINTMSK_ENUMDNEM_Pos (13U) -#define GINTMSK_ENUMDNEM_Msk (0x1UL << GINTMSK_ENUMDNEM_Pos) // 0x00002000 */ -#define GINTMSK_ENUMDNEM GINTMSK_ENUMDNEM_Msk // Enumeration done mask */ +#define GINTMSK_ENUMDNEM_Msk (0x1UL << GINTMSK_ENUMDNEM_Pos) // 0x00002000 +#define GINTMSK_ENUMDNEM GINTMSK_ENUMDNEM_Msk // Enumeration done mask #define GINTMSK_ISOODRPM_Pos (14U) -#define GINTMSK_ISOODRPM_Msk (0x1UL << GINTMSK_ISOODRPM_Pos) // 0x00004000 */ -#define GINTMSK_ISOODRPM GINTMSK_ISOODRPM_Msk // Isochronous OUT packet dropped interrupt mask */ +#define GINTMSK_ISOODRPM_Msk (0x1UL << GINTMSK_ISOODRPM_Pos) // 0x00004000 +#define GINTMSK_ISOODRPM GINTMSK_ISOODRPM_Msk // Isochronous OUT packet dropped interrupt mask #define GINTMSK_EOPFM_Pos (15U) -#define GINTMSK_EOPFM_Msk (0x1UL << GINTMSK_EOPFM_Pos) // 0x00008000 */ -#define GINTMSK_EOPFM GINTMSK_EOPFM_Msk // End of periodic frame interrupt mask */ +#define GINTMSK_EOPFM_Msk (0x1UL << GINTMSK_EOPFM_Pos) // 0x00008000 +#define GINTMSK_EOPFM GINTMSK_EOPFM_Msk // End of periodic frame interrupt mask #define GINTMSK_EPMISM_Pos (17U) -#define GINTMSK_EPMISM_Msk (0x1UL << GINTMSK_EPMISM_Pos) // 0x00020000 */ -#define GINTMSK_EPMISM GINTMSK_EPMISM_Msk // Endpoint mismatch interrupt mask */ +#define GINTMSK_EPMISM_Msk (0x1UL << GINTMSK_EPMISM_Pos) // 0x00020000 +#define GINTMSK_EPMISM GINTMSK_EPMISM_Msk // Endpoint mismatch interrupt mask #define GINTMSK_IEPINT_Pos (18U) -#define GINTMSK_IEPINT_Msk (0x1UL << GINTMSK_IEPINT_Pos) // 0x00040000 */ -#define GINTMSK_IEPINT GINTMSK_IEPINT_Msk // IN endpoints interrupt mask */ +#define GINTMSK_IEPINT_Msk (0x1UL << GINTMSK_IEPINT_Pos) // 0x00040000 +#define GINTMSK_IEPINT GINTMSK_IEPINT_Msk // IN endpoints interrupt mask #define GINTMSK_OEPINT_Pos (19U) -#define GINTMSK_OEPINT_Msk (0x1UL << GINTMSK_OEPINT_Pos) // 0x00080000 */ -#define GINTMSK_OEPINT GINTMSK_OEPINT_Msk // OUT endpoints interrupt mask */ +#define GINTMSK_OEPINT_Msk (0x1UL << GINTMSK_OEPINT_Pos) // 0x00080000 +#define GINTMSK_OEPINT GINTMSK_OEPINT_Msk // OUT endpoints interrupt mask #define GINTMSK_IISOIXFRM_Pos (20U) -#define GINTMSK_IISOIXFRM_Msk (0x1UL << GINTMSK_IISOIXFRM_Pos) // 0x00100000 */ -#define GINTMSK_IISOIXFRM GINTMSK_IISOIXFRM_Msk // Incomplete isochronous IN transfer mask */ +#define GINTMSK_IISOIXFRM_Msk (0x1UL << GINTMSK_IISOIXFRM_Pos) // 0x00100000 +#define GINTMSK_IISOIXFRM GINTMSK_IISOIXFRM_Msk // Incomplete isochronous IN transfer mask #define GINTMSK_PXFRM_IISOOXFRM_Pos (21U) -#define GINTMSK_PXFRM_IISOOXFRM_Msk (0x1UL << GINTMSK_PXFRM_IISOOXFRM_Pos) // 0x00200000 */ -#define GINTMSK_PXFRM_IISOOXFRM GINTMSK_PXFRM_IISOOXFRM_Msk // Incomplete periodic transfer mask */ +#define GINTMSK_PXFRM_IISOOXFRM_Msk (0x1UL << GINTMSK_PXFRM_IISOOXFRM_Pos) // 0x00200000 +#define GINTMSK_PXFRM_IISOOXFRM GINTMSK_PXFRM_IISOOXFRM_Msk // Incomplete periodic transfer mask #define GINTMSK_FSUSPM_Pos (22U) -#define GINTMSK_FSUSPM_Msk (0x1UL << GINTMSK_FSUSPM_Pos) // 0x00400000 */ -#define GINTMSK_FSUSPM GINTMSK_FSUSPM_Msk // Data fetch suspended mask */ +#define GINTMSK_FSUSPM_Msk (0x1UL << GINTMSK_FSUSPM_Pos) // 0x00400000 +#define GINTMSK_FSUSPM GINTMSK_FSUSPM_Msk // Data fetch suspended mask #define GINTMSK_RSTDEM_Pos (23U) -#define GINTMSK_RSTDEM_Msk (0x1UL << GINTMSK_RSTDEM_Pos) // 0x00800000 */ -#define GINTMSK_RSTDEM GINTMSK_RSTDEM_Msk // Reset detected interrupt mask */ +#define GINTMSK_RSTDEM_Msk (0x1UL << GINTMSK_RSTDEM_Pos) // 0x00800000 +#define GINTMSK_RSTDEM GINTMSK_RSTDEM_Msk // Reset detected interrupt mask #define GINTMSK_PRTIM_Pos (24U) -#define GINTMSK_PRTIM_Msk (0x1UL << GINTMSK_PRTIM_Pos) // 0x01000000 */ -#define GINTMSK_PRTIM GINTMSK_PRTIM_Msk // Host port interrupt mask */ +#define GINTMSK_PRTIM_Msk (0x1UL << GINTMSK_PRTIM_Pos) // 0x01000000 +#define GINTMSK_PRTIM GINTMSK_PRTIM_Msk // Host port interrupt mask #define GINTMSK_HCIM_Pos (25U) -#define GINTMSK_HCIM_Msk (0x1UL << GINTMSK_HCIM_Pos) // 0x02000000 */ -#define GINTMSK_HCIM GINTMSK_HCIM_Msk // Host channels interrupt mask */ +#define GINTMSK_HCIM_Msk (0x1UL << GINTMSK_HCIM_Pos) // 0x02000000 +#define GINTMSK_HCIM GINTMSK_HCIM_Msk // Host channels interrupt mask #define GINTMSK_PTXFEM_Pos (26U) -#define GINTMSK_PTXFEM_Msk (0x1UL << GINTMSK_PTXFEM_Pos) // 0x04000000 */ -#define GINTMSK_PTXFEM GINTMSK_PTXFEM_Msk // Periodic TxFIFO empty mask */ +#define GINTMSK_PTXFEM_Msk (0x1UL << GINTMSK_PTXFEM_Pos) // 0x04000000 +#define GINTMSK_PTXFEM GINTMSK_PTXFEM_Msk // Periodic TxFIFO empty mask #define GINTMSK_LPMINTM_Pos (27U) -#define GINTMSK_LPMINTM_Msk (0x1UL << GINTMSK_LPMINTM_Pos) // 0x08000000 */ -#define GINTMSK_LPMINTM GINTMSK_LPMINTM_Msk // LPM interrupt Mask */ +#define GINTMSK_LPMINTM_Msk (0x1UL << GINTMSK_LPMINTM_Pos) // 0x08000000 +#define GINTMSK_LPMINTM GINTMSK_LPMINTM_Msk // LPM interrupt Mask #define GINTMSK_CIDSCHGM_Pos (28U) -#define GINTMSK_CIDSCHGM_Msk (0x1UL << GINTMSK_CIDSCHGM_Pos) // 0x10000000 */ -#define GINTMSK_CIDSCHGM GINTMSK_CIDSCHGM_Msk // Connector ID status change mask */ +#define GINTMSK_CIDSCHGM_Msk (0x1UL << GINTMSK_CIDSCHGM_Pos) // 0x10000000 +#define GINTMSK_CIDSCHGM GINTMSK_CIDSCHGM_Msk // Connector ID status change mask #define GINTMSK_DISCINT_Pos (29U) -#define GINTMSK_DISCINT_Msk (0x1UL << GINTMSK_DISCINT_Pos) // 0x20000000 */ -#define GINTMSK_DISCINT GINTMSK_DISCINT_Msk // Disconnect detected interrupt mask */ +#define GINTMSK_DISCINT_Msk (0x1UL << GINTMSK_DISCINT_Pos) // 0x20000000 +#define GINTMSK_DISCINT GINTMSK_DISCINT_Msk // Disconnect detected interrupt mask #define GINTMSK_SRQIM_Pos (30U) -#define GINTMSK_SRQIM_Msk (0x1UL << GINTMSK_SRQIM_Pos) // 0x40000000 */ -#define GINTMSK_SRQIM GINTMSK_SRQIM_Msk // Session request/new session detected interrupt mask */ +#define GINTMSK_SRQIM_Msk (0x1UL << GINTMSK_SRQIM_Pos) // 0x40000000 +#define GINTMSK_SRQIM GINTMSK_SRQIM_Msk // Session request/new session detected interrupt mask #define GINTMSK_WUIM_Pos (31U) -#define GINTMSK_WUIM_Msk (0x1UL << GINTMSK_WUIM_Pos) // 0x80000000 */ -#define GINTMSK_WUIM GINTMSK_WUIM_Msk // Resume/remote wakeup detected interrupt mask */ +#define GINTMSK_WUIM_Msk (0x1UL << GINTMSK_WUIM_Pos) // 0x80000000 +#define GINTMSK_WUIM GINTMSK_WUIM_Msk // Resume/remote wakeup detected interrupt mask /******************** Bit definition for DAINT register ********************/ #define DAINT_IEPINT_Pos (0U) -#define DAINT_IEPINT_Msk (0xFFFFUL << DAINT_IEPINT_Pos) // 0x0000FFFF */ -#define DAINT_IEPINT DAINT_IEPINT_Msk // IN endpoint interrupt bits */ +#define DAINT_IEPINT_Msk (0xFFFFUL << DAINT_IEPINT_Pos) // 0x0000FFFF +#define DAINT_IEPINT DAINT_IEPINT_Msk // IN endpoint interrupt bits #define DAINT_OEPINT_Pos (16U) -#define DAINT_OEPINT_Msk (0xFFFFUL << DAINT_OEPINT_Pos) // 0xFFFF0000 */ -#define DAINT_OEPINT DAINT_OEPINT_Msk // OUT endpoint interrupt bits */ +#define DAINT_OEPINT_Msk (0xFFFFUL << DAINT_OEPINT_Pos) // 0xFFFF0000 +#define DAINT_OEPINT DAINT_OEPINT_Msk // OUT endpoint interrupt bits /******************** Bit definition for HAINTMSK register ********************/ #define HAINTMSK_HAINTM_Pos (0U) -#define HAINTMSK_HAINTM_Msk (0xFFFFUL << HAINTMSK_HAINTM_Pos) // 0x0000FFFF */ -#define HAINTMSK_HAINTM HAINTMSK_HAINTM_Msk // Channel interrupt mask */ +#define HAINTMSK_HAINTM_Msk (0xFFFFUL << HAINTMSK_HAINTM_Pos) // 0x0000FFFF +#define HAINTMSK_HAINTM HAINTMSK_HAINTM_Msk // Channel interrupt mask /******************** Bit definition for GRXSTSP register ********************/ #define GRXSTSP_EPNUM_Pos (0U) -#define GRXSTSP_EPNUM_Msk (0xFUL << GRXSTSP_EPNUM_Pos) // 0x0000000F */ -#define GRXSTSP_EPNUM GRXSTSP_EPNUM_Msk // IN EP interrupt mask bits */ +#define GRXSTSP_EPNUM_Msk (0xFUL << GRXSTSP_EPNUM_Pos) // 0x0000000F +#define GRXSTSP_EPNUM GRXSTSP_EPNUM_Msk // IN EP interrupt mask bits #define GRXSTSP_BCNT_Pos (4U) -#define GRXSTSP_BCNT_Msk (0x7FFUL << GRXSTSP_BCNT_Pos) // 0x00007FF0 */ -#define GRXSTSP_BCNT GRXSTSP_BCNT_Msk // OUT EP interrupt mask bits */ +#define GRXSTSP_BCNT_Msk (0x7FFUL << GRXSTSP_BCNT_Pos) // 0x00007FF0 +#define GRXSTSP_BCNT GRXSTSP_BCNT_Msk // OUT EP interrupt mask bits #define GRXSTSP_DPID_Pos (15U) -#define GRXSTSP_DPID_Msk (0x3UL << GRXSTSP_DPID_Pos) // 0x00018000 */ -#define GRXSTSP_DPID GRXSTSP_DPID_Msk // OUT EP interrupt mask bits */ +#define GRXSTSP_DPID_Msk (0x3UL << GRXSTSP_DPID_Pos) // 0x00018000 +#define GRXSTSP_DPID GRXSTSP_DPID_Msk // OUT EP interrupt mask bits #define GRXSTSP_PKTSTS_Pos (17U) -#define GRXSTSP_PKTSTS_Msk (0xFUL << GRXSTSP_PKTSTS_Pos) // 0x001E0000 */ -#define GRXSTSP_PKTSTS GRXSTSP_PKTSTS_Msk // OUT EP interrupt mask bits */ +#define GRXSTSP_PKTSTS_Msk (0xFUL << GRXSTSP_PKTSTS_Pos) // 0x001E0000 +#define GRXSTSP_PKTSTS GRXSTSP_PKTSTS_Msk // OUT EP interrupt mask bits #define GRXSTS_PKTSTS_GLOBALOUTNAK 1 #define GRXSTS_PKTSTS_OUTRX 2 @@ -934,773 +934,803 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); /******************** Bit definition for DAINTMSK register ********************/ #define DAINTMSK_IEPM_Pos (0U) -#define DAINTMSK_IEPM_Msk (0xFFFFUL << DAINTMSK_IEPM_Pos) // 0x0000FFFF */ -#define DAINTMSK_IEPM DAINTMSK_IEPM_Msk // IN EP interrupt mask bits */ +#define DAINTMSK_IEPM_Msk (0xFFFFUL << DAINTMSK_IEPM_Pos) // 0x0000FFFF +#define DAINTMSK_IEPM DAINTMSK_IEPM_Msk // IN EP interrupt mask bits #define DAINTMSK_OEPM_Pos (16U) -#define DAINTMSK_OEPM_Msk (0xFFFFUL << DAINTMSK_OEPM_Pos) // 0xFFFF0000 */ -#define DAINTMSK_OEPM DAINTMSK_OEPM_Msk // OUT EP interrupt mask bits */ +#define DAINTMSK_OEPM_Msk (0xFFFFUL << DAINTMSK_OEPM_Pos) // 0xFFFF0000 +#define DAINTMSK_OEPM DAINTMSK_OEPM_Msk // OUT EP interrupt mask bits #if 0 /******************** Bit definition for OTG register ********************/ #define CHNUM_Pos (0U) -#define CHNUM_Msk (0xFUL << CHNUM_Pos) // 0x0000000F */ -#define CHNUM CHNUM_Msk // Channel number */ -#define CHNUM_0 (0x1UL << CHNUM_Pos) // 0x00000001 */ -#define CHNUM_1 (0x2UL << CHNUM_Pos) // 0x00000002 */ -#define CHNUM_2 (0x4UL << CHNUM_Pos) // 0x00000004 */ -#define CHNUM_3 (0x8UL << CHNUM_Pos) // 0x00000008 */ +#define CHNUM_Msk (0xFUL << CHNUM_Pos) // 0x0000000F +#define CHNUM CHNUM_Msk // Channel number +#define CHNUM_0 (0x1UL << CHNUM_Pos) // 0x00000001 +#define CHNUM_1 (0x2UL << CHNUM_Pos) // 0x00000002 +#define CHNUM_2 (0x4UL << CHNUM_Pos) // 0x00000004 +#define CHNUM_3 (0x8UL << CHNUM_Pos) // 0x00000008 #define BCNT_Pos (4U) -#define BCNT_Msk (0x7FFUL << BCNT_Pos) // 0x00007FF0 */ -#define BCNT BCNT_Msk // Byte count */ +#define BCNT_Msk (0x7FFUL << BCNT_Pos) // 0x00007FF0 +#define BCNT BCNT_Msk // Byte count #define DPID_Pos (15U) -#define DPID_Msk (0x3UL << DPID_Pos) // 0x00018000 */ -#define DPID DPID_Msk // Data PID */ -#define DPID_0 (0x1UL << DPID_Pos) // 0x00008000 */ -#define DPID_1 (0x2UL << DPID_Pos) // 0x00010000 */ +#define DPID_Msk (0x3UL << DPID_Pos) // 0x00018000 +#define DPID DPID_Msk // Data PID +#define DPID_0 (0x1UL << DPID_Pos) // 0x00008000 +#define DPID_1 (0x2UL << DPID_Pos) // 0x00010000 #define PKTSTS_Pos (17U) -#define PKTSTS_Msk (0xFUL << PKTSTS_Pos) // 0x001E0000 */ -#define PKTSTS PKTSTS_Msk // Packet status */ -#define PKTSTS_0 (0x1UL << PKTSTS_Pos) // 0x00020000 */ -#define PKTSTS_1 (0x2UL << PKTSTS_Pos) // 0x00040000 */ -#define PKTSTS_2 (0x4UL << PKTSTS_Pos) // 0x00080000 */ -#define PKTSTS_3 (0x8UL << PKTSTS_Pos) // 0x00100000 */ +#define PKTSTS_Msk (0xFUL << PKTSTS_Pos) // 0x001E0000 +#define PKTSTS PKTSTS_Msk // Packet status +#define PKTSTS_0 (0x1UL << PKTSTS_Pos) // 0x00020000 +#define PKTSTS_1 (0x2UL << PKTSTS_Pos) // 0x00040000 +#define PKTSTS_2 (0x4UL << PKTSTS_Pos) // 0x00080000 +#define PKTSTS_3 (0x8UL << PKTSTS_Pos) // 0x00100000 #define EPNUM_Pos (0U) -#define EPNUM_Msk (0xFUL << EPNUM_Pos) // 0x0000000F */ -#define EPNUM EPNUM_Msk // Endpoint number */ -#define EPNUM_0 (0x1UL << EPNUM_Pos) // 0x00000001 */ -#define EPNUM_1 (0x2UL << EPNUM_Pos) // 0x00000002 */ -#define EPNUM_2 (0x4UL << EPNUM_Pos) // 0x00000004 */ -#define EPNUM_3 (0x8UL << EPNUM_Pos) // 0x00000008 */ +#define EPNUM_Msk (0xFUL << EPNUM_Pos) // 0x0000000F +#define EPNUM EPNUM_Msk // Endpoint number +#define EPNUM_0 (0x1UL << EPNUM_Pos) // 0x00000001 +#define EPNUM_1 (0x2UL << EPNUM_Pos) // 0x00000002 +#define EPNUM_2 (0x4UL << EPNUM_Pos) // 0x00000004 +#define EPNUM_3 (0x8UL << EPNUM_Pos) // 0x00000008 #define FRMNUM_Pos (21U) -#define FRMNUM_Msk (0xFUL << FRMNUM_Pos) // 0x01E00000 */ -#define FRMNUM FRMNUM_Msk // Frame number */ -#define FRMNUM_0 (0x1UL << FRMNUM_Pos) // 0x00200000 */ -#define FRMNUM_1 (0x2UL << FRMNUM_Pos) // 0x00400000 */ -#define FRMNUM_2 (0x4UL << FRMNUM_Pos) // 0x00800000 */ -#define FRMNUM_3 (0x8UL << FRMNUM_Pos) // 0x01000000 */ +#define FRMNUM_Msk (0xFUL << FRMNUM_Pos) // 0x01E00000 +#define FRMNUM FRMNUM_Msk // Frame number +#define FRMNUM_0 (0x1UL << FRMNUM_Pos) // 0x00200000 +#define FRMNUM_1 (0x2UL << FRMNUM_Pos) // 0x00400000 +#define FRMNUM_2 (0x4UL << FRMNUM_Pos) // 0x00800000 +#define FRMNUM_3 (0x8UL << FRMNUM_Pos) // 0x01000000 #endif /******************** Bit definition for GRXFSIZ register ********************/ #define GRXFSIZ_RXFD_Pos (0U) -#define GRXFSIZ_RXFD_Msk (0xFFFFUL << GRXFSIZ_RXFD_Pos) // 0x0000FFFF */ -#define GRXFSIZ_RXFD GRXFSIZ_RXFD_Msk // RxFIFO depth */ +#define GRXFSIZ_RXFD_Msk (0xFFFFUL << GRXFSIZ_RXFD_Pos) // 0x0000FFFF +#define GRXFSIZ_RXFD GRXFSIZ_RXFD_Msk // RxFIFO depth /******************** Bit definition for DVBUSDIS register ********************/ #define DVBUSDIS_VBUSDT_Pos (0U) -#define DVBUSDIS_VBUSDT_Msk (0xFFFFUL << DVBUSDIS_VBUSDT_Pos) // 0x0000FFFF */ -#define DVBUSDIS_VBUSDT DVBUSDIS_VBUSDT_Msk // Device VBUS discharge time */ +#define DVBUSDIS_VBUSDT_Msk (0xFFFFUL << DVBUSDIS_VBUSDT_Pos) // 0x0000FFFF +#define DVBUSDIS_VBUSDT DVBUSDIS_VBUSDT_Msk // Device VBUS discharge time /******************** Bit definition for OTG register ********************/ #define GNPTXFSIZ_NPTXFSA_Pos (0U) -#define GNPTXFSIZ_NPTXFSA_Msk (0xFFFFUL << GNPTXFSIZ_NPTXFSA_Pos) // 0x0000FFFF */ -#define GNPTXFSIZ_NPTXFSA GNPTXFSIZ_NPTXFSA_Msk // Nonperiodic transmit RAM start address */ +#define GNPTXFSIZ_NPTXFSA_Msk (0xFFFFUL << GNPTXFSIZ_NPTXFSA_Pos) // 0x0000FFFF +#define GNPTXFSIZ_NPTXFSA GNPTXFSIZ_NPTXFSA_Msk // Nonperiodic transmit RAM start address #define GNPTXFSIZ_NPTXFD_Pos (16U) -#define GNPTXFSIZ_NPTXFD_Msk (0xFFFFUL << GNPTXFSIZ_NPTXFD_Pos) // 0xFFFF0000 */ -#define GNPTXFSIZ_NPTXFD GNPTXFSIZ_NPTXFD_Msk // Nonperiodic TxFIFO depth */ +#define GNPTXFSIZ_NPTXFD_Msk (0xFFFFUL << GNPTXFSIZ_NPTXFD_Pos) // 0xFFFF0000 +#define GNPTXFSIZ_NPTXFD GNPTXFSIZ_NPTXFD_Msk // Nonperiodic TxFIFO depth #define DIEPTXF0_TX0FSA_Pos (0U) -#define DIEPTXF0_TX0FSA_Msk (0xFFFFUL << DIEPTXF0_TX0FSA_Pos) // 0x0000FFFF */ -#define DIEPTXF0_TX0FSA DIEPTXF0_TX0FSA_Msk // Endpoint 0 transmit RAM start address */ +#define DIEPTXF0_TX0FSA_Msk (0xFFFFUL << DIEPTXF0_TX0FSA_Pos) // 0x0000FFFF +#define DIEPTXF0_TX0FSA DIEPTXF0_TX0FSA_Msk // Endpoint 0 transmit RAM start address #define DIEPTXF0_TX0FD_Pos (16U) -#define DIEPTXF0_TX0FD_Msk (0xFFFFUL << DIEPTXF0_TX0FD_Pos) // 0xFFFF0000 */ -#define DIEPTXF0_TX0FD DIEPTXF0_TX0FD_Msk // Endpoint 0 TxFIFO depth */ +#define DIEPTXF0_TX0FD_Msk (0xFFFFUL << DIEPTXF0_TX0FD_Pos) // 0xFFFF0000 +#define DIEPTXF0_TX0FD DIEPTXF0_TX0FD_Msk // Endpoint 0 TxFIFO depth /******************** Bit definition for DVBUSPULSE register ********************/ #define DVBUSPULSE_DVBUSP_Pos (0U) -#define DVBUSPULSE_DVBUSP_Msk (0xFFFUL << DVBUSPULSE_DVBUSP_Pos) // 0x00000FFF */ -#define DVBUSPULSE_DVBUSP DVBUSPULSE_DVBUSP_Msk // Device VBUS pulsing time */ +#define DVBUSPULSE_DVBUSP_Msk (0xFFFUL << DVBUSPULSE_DVBUSP_Pos) // 0x00000FFF +#define DVBUSPULSE_DVBUSP DVBUSPULSE_DVBUSP_Msk // Device VBUS pulsing time /******************** Bit definition for GNPTXSTS register ********************/ #define GNPTXSTS_NPTXFSAV_Pos (0U) -#define GNPTXSTS_NPTXFSAV_Msk (0xFFFFUL << GNPTXSTS_NPTXFSAV_Pos) // 0x0000FFFF */ -#define GNPTXSTS_NPTXFSAV GNPTXSTS_NPTXFSAV_Msk // Nonperiodic TxFIFO space available */ +#define GNPTXSTS_NPTXFSAV_Msk (0xFFFFUL << GNPTXSTS_NPTXFSAV_Pos) // 0x0000FFFF +#define GNPTXSTS_NPTXFSAV GNPTXSTS_NPTXFSAV_Msk // Nonperiodic TxFIFO space available #define GNPTXSTS_NPTQXSAV_Pos (16U) -#define GNPTXSTS_NPTQXSAV_Msk (0xFFUL << GNPTXSTS_NPTQXSAV_Pos) // 0x00FF0000 */ -#define GNPTXSTS_NPTQXSAV GNPTXSTS_NPTQXSAV_Msk // Nonperiodic transmit request queue space available */ -#define GNPTXSTS_NPTQXSAV_0 (0x01UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00010000 */ -#define GNPTXSTS_NPTQXSAV_1 (0x02UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00020000 */ -#define GNPTXSTS_NPTQXSAV_2 (0x04UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00040000 */ -#define GNPTXSTS_NPTQXSAV_3 (0x08UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00080000 */ -#define GNPTXSTS_NPTQXSAV_4 (0x10UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00100000 */ -#define GNPTXSTS_NPTQXSAV_5 (0x20UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00200000 */ -#define GNPTXSTS_NPTQXSAV_6 (0x40UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00400000 */ -#define GNPTXSTS_NPTQXSAV_7 (0x80UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00800000 */ +#define GNPTXSTS_NPTQXSAV_Msk (0xFFUL << GNPTXSTS_NPTQXSAV_Pos) // 0x00FF0000 +#define GNPTXSTS_NPTQXSAV GNPTXSTS_NPTQXSAV_Msk // Nonperiodic transmit request queue space available +#define GNPTXSTS_NPTQXSAV_0 (0x01UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00010000 +#define GNPTXSTS_NPTQXSAV_1 (0x02UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00020000 +#define GNPTXSTS_NPTQXSAV_2 (0x04UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00040000 +#define GNPTXSTS_NPTQXSAV_3 (0x08UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00080000 +#define GNPTXSTS_NPTQXSAV_4 (0x10UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00100000 +#define GNPTXSTS_NPTQXSAV_5 (0x20UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00200000 +#define GNPTXSTS_NPTQXSAV_6 (0x40UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00400000 +#define GNPTXSTS_NPTQXSAV_7 (0x80UL << GNPTXSTS_NPTQXSAV_Pos) // 0x00800000 #define GNPTXSTS_NPTXQTOP_Pos (24U) -#define GNPTXSTS_NPTXQTOP_Msk (0x7FUL << GNPTXSTS_NPTXQTOP_Pos) // 0x7F000000 */ -#define GNPTXSTS_NPTXQTOP GNPTXSTS_NPTXQTOP_Msk // Top of the nonperiodic transmit request queue */ -#define GNPTXSTS_NPTXQTOP_0 (0x01UL << GNPTXSTS_NPTXQTOP_Pos) // 0x01000000 */ -#define GNPTXSTS_NPTXQTOP_1 (0x02UL << GNPTXSTS_NPTXQTOP_Pos) // 0x02000000 */ -#define GNPTXSTS_NPTXQTOP_2 (0x04UL << GNPTXSTS_NPTXQTOP_Pos) // 0x04000000 */ -#define GNPTXSTS_NPTXQTOP_3 (0x08UL << GNPTXSTS_NPTXQTOP_Pos) // 0x08000000 */ -#define GNPTXSTS_NPTXQTOP_4 (0x10UL << GNPTXSTS_NPTXQTOP_Pos) // 0x10000000 */ -#define GNPTXSTS_NPTXQTOP_5 (0x20UL << GNPTXSTS_NPTXQTOP_Pos) // 0x20000000 */ -#define GNPTXSTS_NPTXQTOP_6 (0x40UL << GNPTXSTS_NPTXQTOP_Pos) // 0x40000000 */ +#define GNPTXSTS_NPTXQTOP_Msk (0x7FUL << GNPTXSTS_NPTXQTOP_Pos) // 0x7F000000 +#define GNPTXSTS_NPTXQTOP GNPTXSTS_NPTXQTOP_Msk // Top of the nonperiodic transmit request queue +#define GNPTXSTS_NPTXQTOP_0 (0x01UL << GNPTXSTS_NPTXQTOP_Pos) // 0x01000000 +#define GNPTXSTS_NPTXQTOP_1 (0x02UL << GNPTXSTS_NPTXQTOP_Pos) // 0x02000000 +#define GNPTXSTS_NPTXQTOP_2 (0x04UL << GNPTXSTS_NPTXQTOP_Pos) // 0x04000000 +#define GNPTXSTS_NPTXQTOP_3 (0x08UL << GNPTXSTS_NPTXQTOP_Pos) // 0x08000000 +#define GNPTXSTS_NPTXQTOP_4 (0x10UL << GNPTXSTS_NPTXQTOP_Pos) // 0x10000000 +#define GNPTXSTS_NPTXQTOP_5 (0x20UL << GNPTXSTS_NPTXQTOP_Pos) // 0x20000000 +#define GNPTXSTS_NPTXQTOP_6 (0x40UL << GNPTXSTS_NPTXQTOP_Pos) // 0x40000000 /******************** Bit definition for DTHRCTL register ********************/ #define DTHRCTL_NONISOTHREN_Pos (0U) -#define DTHRCTL_NONISOTHREN_Msk (0x1UL << DTHRCTL_NONISOTHREN_Pos) // 0x00000001 */ -#define DTHRCTL_NONISOTHREN DTHRCTL_NONISOTHREN_Msk // Nonisochronous IN endpoints threshold enable */ +#define DTHRCTL_NONISOTHREN_Msk (0x1UL << DTHRCTL_NONISOTHREN_Pos) // 0x00000001 +#define DTHRCTL_NONISOTHREN DTHRCTL_NONISOTHREN_Msk // Nonisochronous IN endpoints threshold enable #define DTHRCTL_ISOTHREN_Pos (1U) -#define DTHRCTL_ISOTHREN_Msk (0x1UL << DTHRCTL_ISOTHREN_Pos) // 0x00000002 */ -#define DTHRCTL_ISOTHREN DTHRCTL_ISOTHREN_Msk // ISO IN endpoint threshold enable */ +#define DTHRCTL_ISOTHREN_Msk (0x1UL << DTHRCTL_ISOTHREN_Pos) // 0x00000002 +#define DTHRCTL_ISOTHREN DTHRCTL_ISOTHREN_Msk // ISO IN endpoint threshold enable #define DTHRCTL_TXTHRLEN_Pos (2U) -#define DTHRCTL_TXTHRLEN_Msk (0x1FFUL << DTHRCTL_TXTHRLEN_Pos) // 0x000007FC */ -#define DTHRCTL_TXTHRLEN DTHRCTL_TXTHRLEN_Msk // Transmit threshold length */ -#define DTHRCTL_TXTHRLEN_0 (0x001UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000004 */ -#define DTHRCTL_TXTHRLEN_1 (0x002UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000008 */ -#define DTHRCTL_TXTHRLEN_2 (0x004UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000010 */ -#define DTHRCTL_TXTHRLEN_3 (0x008UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000020 */ -#define DTHRCTL_TXTHRLEN_4 (0x010UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000040 */ -#define DTHRCTL_TXTHRLEN_5 (0x020UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000080 */ -#define DTHRCTL_TXTHRLEN_6 (0x040UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000100 */ -#define DTHRCTL_TXTHRLEN_7 (0x080UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000200 */ -#define DTHRCTL_TXTHRLEN_8 (0x100UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000400 */ +#define DTHRCTL_TXTHRLEN_Msk (0x1FFUL << DTHRCTL_TXTHRLEN_Pos) // 0x000007FC +#define DTHRCTL_TXTHRLEN DTHRCTL_TXTHRLEN_Msk // Transmit threshold length +#define DTHRCTL_TXTHRLEN_0 (0x001UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000004 +#define DTHRCTL_TXTHRLEN_1 (0x002UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000008 +#define DTHRCTL_TXTHRLEN_2 (0x004UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000010 +#define DTHRCTL_TXTHRLEN_3 (0x008UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000020 +#define DTHRCTL_TXTHRLEN_4 (0x010UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000040 +#define DTHRCTL_TXTHRLEN_5 (0x020UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000080 +#define DTHRCTL_TXTHRLEN_6 (0x040UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000100 +#define DTHRCTL_TXTHRLEN_7 (0x080UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000200 +#define DTHRCTL_TXTHRLEN_8 (0x100UL << DTHRCTL_TXTHRLEN_Pos) // 0x00000400 #define DTHRCTL_RXTHREN_Pos (16U) -#define DTHRCTL_RXTHREN_Msk (0x1UL << DTHRCTL_RXTHREN_Pos) // 0x00010000 */ -#define DTHRCTL_RXTHREN DTHRCTL_RXTHREN_Msk // Receive threshold enable */ +#define DTHRCTL_RXTHREN_Msk (0x1UL << DTHRCTL_RXTHREN_Pos) // 0x00010000 +#define DTHRCTL_RXTHREN DTHRCTL_RXTHREN_Msk // Receive threshold enable #define DTHRCTL_RXTHRLEN_Pos (17U) -#define DTHRCTL_RXTHRLEN_Msk (0x1FFUL << DTHRCTL_RXTHRLEN_Pos) // 0x03FE0000 */ -#define DTHRCTL_RXTHRLEN DTHRCTL_RXTHRLEN_Msk // Receive threshold length */ -#define DTHRCTL_RXTHRLEN_0 (0x001UL << DTHRCTL_RXTHRLEN_Pos) // 0x00020000 */ -#define DTHRCTL_RXTHRLEN_1 (0x002UL << DTHRCTL_RXTHRLEN_Pos) // 0x00040000 */ -#define DTHRCTL_RXTHRLEN_2 (0x004UL << DTHRCTL_RXTHRLEN_Pos) // 0x00080000 */ -#define DTHRCTL_RXTHRLEN_3 (0x008UL << DTHRCTL_RXTHRLEN_Pos) // 0x00100000 */ -#define DTHRCTL_RXTHRLEN_4 (0x010UL << DTHRCTL_RXTHRLEN_Pos) // 0x00200000 */ -#define DTHRCTL_RXTHRLEN_5 (0x020UL << DTHRCTL_RXTHRLEN_Pos) // 0x00400000 */ -#define DTHRCTL_RXTHRLEN_6 (0x040UL << DTHRCTL_RXTHRLEN_Pos) // 0x00800000 */ -#define DTHRCTL_RXTHRLEN_7 (0x080UL << DTHRCTL_RXTHRLEN_Pos) // 0x01000000 */ -#define DTHRCTL_RXTHRLEN_8 (0x100UL << DTHRCTL_RXTHRLEN_Pos) // 0x02000000 */ +#define DTHRCTL_RXTHRLEN_Msk (0x1FFUL << DTHRCTL_RXTHRLEN_Pos) // 0x03FE0000 +#define DTHRCTL_RXTHRLEN DTHRCTL_RXTHRLEN_Msk // Receive threshold length +#define DTHRCTL_RXTHRLEN_0 (0x001UL << DTHRCTL_RXTHRLEN_Pos) // 0x00020000 +#define DTHRCTL_RXTHRLEN_1 (0x002UL << DTHRCTL_RXTHRLEN_Pos) // 0x00040000 +#define DTHRCTL_RXTHRLEN_2 (0x004UL << DTHRCTL_RXTHRLEN_Pos) // 0x00080000 +#define DTHRCTL_RXTHRLEN_3 (0x008UL << DTHRCTL_RXTHRLEN_Pos) // 0x00100000 +#define DTHRCTL_RXTHRLEN_4 (0x010UL << DTHRCTL_RXTHRLEN_Pos) // 0x00200000 +#define DTHRCTL_RXTHRLEN_5 (0x020UL << DTHRCTL_RXTHRLEN_Pos) // 0x00400000 +#define DTHRCTL_RXTHRLEN_6 (0x040UL << DTHRCTL_RXTHRLEN_Pos) // 0x00800000 +#define DTHRCTL_RXTHRLEN_7 (0x080UL << DTHRCTL_RXTHRLEN_Pos) // 0x01000000 +#define DTHRCTL_RXTHRLEN_8 (0x100UL << DTHRCTL_RXTHRLEN_Pos) // 0x02000000 #define DTHRCTL_ARPEN_Pos (27U) -#define DTHRCTL_ARPEN_Msk (0x1UL << DTHRCTL_ARPEN_Pos) // 0x08000000 */ -#define DTHRCTL_ARPEN DTHRCTL_ARPEN_Msk // Arbiter parking enable */ +#define DTHRCTL_ARPEN_Msk (0x1UL << DTHRCTL_ARPEN_Pos) // 0x08000000 +#define DTHRCTL_ARPEN DTHRCTL_ARPEN_Msk // Arbiter parking enable /******************** Bit definition for DIEPEMPMSK register ********************/ #define DIEPEMPMSK_INEPTXFEM_Pos (0U) -#define DIEPEMPMSK_INEPTXFEM_Msk (0xFFFFUL << DIEPEMPMSK_INEPTXFEM_Pos) // 0x0000FFFF */ -#define DIEPEMPMSK_INEPTXFEM DIEPEMPMSK_INEPTXFEM_Msk // IN EP Tx FIFO empty interrupt mask bits */ +#define DIEPEMPMSK_INEPTXFEM_Msk (0xFFFFUL << DIEPEMPMSK_INEPTXFEM_Pos) // 0x0000FFFF +#define DIEPEMPMSK_INEPTXFEM DIEPEMPMSK_INEPTXFEM_Msk // IN EP Tx FIFO empty interrupt mask bits /******************** Bit definition for DEACHINT register ********************/ #define DEACHINT_IEP1INT_Pos (1U) -#define DEACHINT_IEP1INT_Msk (0x1UL << DEACHINT_IEP1INT_Pos) // 0x00000002 */ -#define DEACHINT_IEP1INT DEACHINT_IEP1INT_Msk // IN endpoint 1interrupt bit */ +#define DEACHINT_IEP1INT_Msk (0x1UL << DEACHINT_IEP1INT_Pos) // 0x00000002 +#define DEACHINT_IEP1INT DEACHINT_IEP1INT_Msk // IN endpoint 1interrupt bit #define DEACHINT_OEP1INT_Pos (17U) -#define DEACHINT_OEP1INT_Msk (0x1UL << DEACHINT_OEP1INT_Pos) // 0x00020000 */ -#define DEACHINT_OEP1INT DEACHINT_OEP1INT_Msk // OUT endpoint 1 interrupt bit */ +#define DEACHINT_OEP1INT_Msk (0x1UL << DEACHINT_OEP1INT_Pos) // 0x00020000 +#define DEACHINT_OEP1INT DEACHINT_OEP1INT_Msk // OUT endpoint 1 interrupt bit /******************** Bit definition for GCCFG register ********************/ #define STM32_GCCFG_DCDET_Pos (0U) -#define STM32_GCCFG_DCDET_Msk (0x1UL << STM32_GCCFG_DCDET_Pos) // 0x00000001 */ -#define STM32_GCCFG_DCDET STM32_GCCFG_DCDET_Msk // Data contact detection (DCD) status */ +#define STM32_GCCFG_DCDET_Msk (0x1UL << STM32_GCCFG_DCDET_Pos) // 0x00000001 +#define STM32_GCCFG_DCDET STM32_GCCFG_DCDET_Msk // Data contact detection (DCD) status + #define STM32_GCCFG_PDET_Pos (1U) -#define STM32_GCCFG_PDET_Msk (0x1UL << STM32_GCCFG_PDET_Pos) // 0x00000002 */ -#define STM32_GCCFG_PDET STM32_GCCFG_PDET_Msk // Primary detection (PD) status */ +#define STM32_GCCFG_PDET_Msk (0x1UL << STM32_GCCFG_PDET_Pos) // 0x00000002 +#define STM32_GCCFG_PDET STM32_GCCFG_PDET_Msk // Primary detection (PD) status + #define STM32_GCCFG_SDET_Pos (2U) -#define STM32_GCCFG_SDET_Msk (0x1UL << STM32_GCCFG_SDET_Pos) // 0x00000004 */ -#define STM32_GCCFG_SDET STM32_GCCFG_SDET_Msk // Secondary detection (SD) status */ +#define STM32_GCCFG_SDET_Msk (0x1UL << STM32_GCCFG_SDET_Pos) // 0x00000004 +#define STM32_GCCFG_SDET STM32_GCCFG_SDET_Msk // Secondary detection (SD) status + #define STM32_GCCFG_PS2DET_Pos (3U) -#define STM32_GCCFG_PS2DET_Msk (0x1UL << STM32_GCCFG_PS2DET_Pos) // 0x00000008 */ -#define STM32_GCCFG_PS2DET STM32_GCCFG_PS2DET_Msk // DM pull-up detection status */ +#define STM32_GCCFG_PS2DET_Msk (0x1UL << STM32_GCCFG_PS2DET_Pos) // 0x00000008 +#define STM32_GCCFG_PS2DET STM32_GCCFG_PS2DET_Msk // DM pull-up detection status + #define STM32_GCCFG_PWRDWN_Pos (16U) -#define STM32_GCCFG_PWRDWN_Msk (0x1UL << STM32_GCCFG_PWRDWN_Pos) // 0x00010000 */ -#define STM32_GCCFG_PWRDWN STM32_GCCFG_PWRDWN_Msk // Power down */ +#define STM32_GCCFG_PWRDWN_Msk (0x1UL << STM32_GCCFG_PWRDWN_Pos) // 0x00010000 +#define STM32_GCCFG_PWRDWN STM32_GCCFG_PWRDWN_Msk // Power down + #define STM32_GCCFG_BCDEN_Pos (17U) -#define STM32_GCCFG_BCDEN_Msk (0x1UL << STM32_GCCFG_BCDEN_Pos) // 0x00020000 */ -#define STM32_GCCFG_BCDEN STM32_GCCFG_BCDEN_Msk // Battery charging detector (BCD) enable */ +#define STM32_GCCFG_BCDEN_Msk (0x1UL << STM32_GCCFG_BCDEN_Pos) // 0x00020000 +#define STM32_GCCFG_BCDEN STM32_GCCFG_BCDEN_Msk // Battery charging detector (BCD) enable + #define STM32_GCCFG_DCDEN_Pos (18U) -#define STM32_GCCFG_DCDEN_Msk (0x1UL << STM32_GCCFG_DCDEN_Pos) // 0x00040000 */ +#define STM32_GCCFG_DCDEN_Msk (0x1UL << STM32_GCCFG_DCDEN_Pos) // 0x00040000 #define STM32_GCCFG_DCDEN STM32_GCCFG_DCDEN_Msk // Data contact detection (DCD) mode enable*/ + #define STM32_GCCFG_PDEN_Pos (19U) -#define STM32_GCCFG_PDEN_Msk (0x1UL << STM32_GCCFG_PDEN_Pos) // 0x00080000 */ +#define STM32_GCCFG_PDEN_Msk (0x1UL << STM32_GCCFG_PDEN_Pos) // 0x00080000 #define STM32_GCCFG_PDEN STM32_GCCFG_PDEN_Msk // Primary detection (PD) mode enable*/ + #define STM32_GCCFG_SDEN_Pos (20U) -#define STM32_GCCFG_SDEN_Msk (0x1UL << STM32_GCCFG_SDEN_Pos) // 0x00100000 */ -#define STM32_GCCFG_SDEN STM32_GCCFG_SDEN_Msk // Secondary detection (SD) mode enable */ +#define STM32_GCCFG_SDEN_Msk (0x1UL << STM32_GCCFG_SDEN_Pos) // 0x00100000 +#define STM32_GCCFG_SDEN STM32_GCCFG_SDEN_Msk // Secondary detection (SD) mode enable + #define STM32_GCCFG_VBDEN_Pos (21U) -#define STM32_GCCFG_VBDEN_Msk (0x1UL << STM32_GCCFG_VBDEN_Pos) // 0x00200000 */ -#define STM32_GCCFG_VBDEN STM32_GCCFG_VBDEN_Msk // VBUS mode enable */ +#define STM32_GCCFG_VBDEN_Msk (0x1UL << STM32_GCCFG_VBDEN_Pos) // 0x00200000 +#define STM32_GCCFG_VBDEN STM32_GCCFG_VBDEN_Msk // VBUS mode enable + #define STM32_GCCFG_OTGIDEN_Pos (22U) -#define STM32_GCCFG_OTGIDEN_Msk (0x1UL << STM32_GCCFG_OTGIDEN_Pos) // 0x00400000 */ -#define STM32_GCCFG_OTGIDEN STM32_GCCFG_OTGIDEN_Msk // OTG Id enable */ +#define STM32_GCCFG_OTGIDEN_Msk (0x1UL << STM32_GCCFG_OTGIDEN_Pos) // 0x00400000 +#define STM32_GCCFG_OTGIDEN STM32_GCCFG_OTGIDEN_Msk // OTG Id enable + #define STM32_GCCFG_PHYHSEN_Pos (23U) -#define STM32_GCCFG_PHYHSEN_Msk (0x1UL << STM32_GCCFG_PHYHSEN_Pos) // 0x00800000 */ -#define STM32_GCCFG_PHYHSEN STM32_GCCFG_PHYHSEN_Msk // HS PHY enable */ +#define STM32_GCCFG_PHYHSEN_Msk (0x1UL << STM32_GCCFG_PHYHSEN_Pos) // 0x00800000 +#define STM32_GCCFG_PHYHSEN STM32_GCCFG_PHYHSEN_Msk // HS PHY enable + +// TODO stm32u5a5 SDEN is 22nd bit, conflict with 20th bit above +//#define STM32_GCCFG_SDEN_Pos (22U) +//#define STM32_GCCFG_SDEN_Msk (0x1U << STM32_GCCFG_SDEN_Pos) // 0x00400000 +//#define STM32_GCCFG_SDEN STM32_GCCFG_SDEN_Msk // Secondary detection (PD) mode enable + +// TODO stm32u5a5 VBVALOVA is 23rd bit, conflict with PHYHSEN bit above +#define STM32_GCCFG_VBVALOVAL_Pos (23U) +#define STM32_GCCFG_VBVALOVAL_Msk (0x1U << STM32_GCCFG_VBVALOVAL_Pos) // 0x00800000 +#define STM32_GCCFG_VBVALOVAL STM32_GCCFG_VBVALOVAL_Msk // Value of VBUSVLDEXT0 femtoPHY input + +#define STM32_GCCFG_VBVALEXTOEN_Pos (24U) +#define STM32_GCCFG_VBVALEXTOEN_Msk (0x1U << STM32_GCCFG_VBVALEXTOEN_Pos) // 0x01000000 +#define STM32_GCCFG_VBVALEXTOEN STM32_GCCFG_VBVALEXTOEN_Msk // Enables of VBUSVLDEXT0 femtoPHY input override + +#define STM32_GCCFG_PULLDOWNEN_Pos (25U) +#define STM32_GCCFG_PULLDOWNEN_Msk (0x1U << STM32_GCCFG_PULLDOWNEN_Pos) // 0x02000000 +#define STM32_GCCFG_PULLDOWNEN STM32_GCCFG_PULLDOWNEN_Msk // Enables of femtoPHY pulldown resistors, used when ID PAD is disabled + /******************** Bit definition for DEACHINTMSK register ********************/ #define DEACHINTMSK_IEP1INTM_Pos (1U) -#define DEACHINTMSK_IEP1INTM_Msk (0x1UL << DEACHINTMSK_IEP1INTM_Pos) // 0x00000002 */ -#define DEACHINTMSK_IEP1INTM DEACHINTMSK_IEP1INTM_Msk // IN Endpoint 1 interrupt mask bit */ +#define DEACHINTMSK_IEP1INTM_Msk (0x1UL << DEACHINTMSK_IEP1INTM_Pos) // 0x00000002 +#define DEACHINTMSK_IEP1INTM DEACHINTMSK_IEP1INTM_Msk // IN Endpoint 1 interrupt mask bit #define DEACHINTMSK_OEP1INTM_Pos (17U) -#define DEACHINTMSK_OEP1INTM_Msk (0x1UL << DEACHINTMSK_OEP1INTM_Pos) // 0x00020000 */ -#define DEACHINTMSK_OEP1INTM DEACHINTMSK_OEP1INTM_Msk // OUT Endpoint 1 interrupt mask bit */ +#define DEACHINTMSK_OEP1INTM_Msk (0x1UL << DEACHINTMSK_OEP1INTM_Pos) // 0x00020000 +#define DEACHINTMSK_OEP1INTM DEACHINTMSK_OEP1INTM_Msk // OUT Endpoint 1 interrupt mask bit /******************** Bit definition for CID register ********************/ #define CID_PRODUCT_ID_Pos (0U) -#define CID_PRODUCT_ID_Msk (0xFFFFFFFFUL << CID_PRODUCT_ID_Pos) // 0xFFFFFFFF */ -#define CID_PRODUCT_ID CID_PRODUCT_ID_Msk // Product ID field */ +#define CID_PRODUCT_ID_Msk (0xFFFFFFFFUL << CID_PRODUCT_ID_Pos) // 0xFFFFFFFF +#define CID_PRODUCT_ID CID_PRODUCT_ID_Msk // Product ID field /******************** Bit definition for GLPMCFG register ********************/ #define GLPMCFG_LPMEN_Pos (0U) -#define GLPMCFG_LPMEN_Msk (0x1UL << GLPMCFG_LPMEN_Pos) // 0x00000001 */ -#define GLPMCFG_LPMEN GLPMCFG_LPMEN_Msk // LPM support enable */ +#define GLPMCFG_LPMEN_Msk (0x1UL << GLPMCFG_LPMEN_Pos) // 0x00000001 +#define GLPMCFG_LPMEN GLPMCFG_LPMEN_Msk // LPM support enable #define GLPMCFG_LPMACK_Pos (1U) -#define GLPMCFG_LPMACK_Msk (0x1UL << GLPMCFG_LPMACK_Pos) // 0x00000002 */ -#define GLPMCFG_LPMACK GLPMCFG_LPMACK_Msk // LPM Token acknowledge enable */ +#define GLPMCFG_LPMACK_Msk (0x1UL << GLPMCFG_LPMACK_Pos) // 0x00000002 +#define GLPMCFG_LPMACK GLPMCFG_LPMACK_Msk // LPM Token acknowledge enable #define GLPMCFG_BESL_Pos (2U) -#define GLPMCFG_BESL_Msk (0xFUL << GLPMCFG_BESL_Pos) // 0x0000003C */ -#define GLPMCFG_BESL GLPMCFG_BESL_Msk // BESL value received with last ACKed LPM Token */ +#define GLPMCFG_BESL_Msk (0xFUL << GLPMCFG_BESL_Pos) // 0x0000003C +#define GLPMCFG_BESL GLPMCFG_BESL_Msk // BESL value received with last ACKed LPM Token #define GLPMCFG_REMWAKE_Pos (6U) -#define GLPMCFG_REMWAKE_Msk (0x1UL << GLPMCFG_REMWAKE_Pos) // 0x00000040 */ -#define GLPMCFG_REMWAKE GLPMCFG_REMWAKE_Msk // bRemoteWake value received with last ACKed LPM Token */ +#define GLPMCFG_REMWAKE_Msk (0x1UL << GLPMCFG_REMWAKE_Pos) // 0x00000040 +#define GLPMCFG_REMWAKE GLPMCFG_REMWAKE_Msk // bRemoteWake value received with last ACKed LPM Token #define GLPMCFG_L1SSEN_Pos (7U) -#define GLPMCFG_L1SSEN_Msk (0x1UL << GLPMCFG_L1SSEN_Pos) // 0x00000080 */ -#define GLPMCFG_L1SSEN GLPMCFG_L1SSEN_Msk // L1 shallow sleep enable */ +#define GLPMCFG_L1SSEN_Msk (0x1UL << GLPMCFG_L1SSEN_Pos) // 0x00000080 +#define GLPMCFG_L1SSEN GLPMCFG_L1SSEN_Msk // L1 shallow sleep enable #define GLPMCFG_BESLTHRS_Pos (8U) -#define GLPMCFG_BESLTHRS_Msk (0xFUL << GLPMCFG_BESLTHRS_Pos) // 0x00000F00 */ -#define GLPMCFG_BESLTHRS GLPMCFG_BESLTHRS_Msk // BESL threshold */ +#define GLPMCFG_BESLTHRS_Msk (0xFUL << GLPMCFG_BESLTHRS_Pos) // 0x00000F00 +#define GLPMCFG_BESLTHRS GLPMCFG_BESLTHRS_Msk // BESL threshold #define GLPMCFG_L1DSEN_Pos (12U) -#define GLPMCFG_L1DSEN_Msk (0x1UL << GLPMCFG_L1DSEN_Pos) // 0x00001000 */ -#define GLPMCFG_L1DSEN GLPMCFG_L1DSEN_Msk // L1 deep sleep enable */ +#define GLPMCFG_L1DSEN_Msk (0x1UL << GLPMCFG_L1DSEN_Pos) // 0x00001000 +#define GLPMCFG_L1DSEN GLPMCFG_L1DSEN_Msk // L1 deep sleep enable #define GLPMCFG_LPMRSP_Pos (13U) -#define GLPMCFG_LPMRSP_Msk (0x3UL << GLPMCFG_LPMRSP_Pos) // 0x00006000 */ -#define GLPMCFG_LPMRSP GLPMCFG_LPMRSP_Msk // LPM response */ +#define GLPMCFG_LPMRSP_Msk (0x3UL << GLPMCFG_LPMRSP_Pos) // 0x00006000 +#define GLPMCFG_LPMRSP GLPMCFG_LPMRSP_Msk // LPM response #define GLPMCFG_SLPSTS_Pos (15U) -#define GLPMCFG_SLPSTS_Msk (0x1UL << GLPMCFG_SLPSTS_Pos) // 0x00008000 */ -#define GLPMCFG_SLPSTS GLPMCFG_SLPSTS_Msk // Port sleep status */ +#define GLPMCFG_SLPSTS_Msk (0x1UL << GLPMCFG_SLPSTS_Pos) // 0x00008000 +#define GLPMCFG_SLPSTS GLPMCFG_SLPSTS_Msk // Port sleep status #define GLPMCFG_L1RSMOK_Pos (16U) -#define GLPMCFG_L1RSMOK_Msk (0x1UL << GLPMCFG_L1RSMOK_Pos) // 0x00010000 */ -#define GLPMCFG_L1RSMOK GLPMCFG_L1RSMOK_Msk // Sleep State Resume OK */ +#define GLPMCFG_L1RSMOK_Msk (0x1UL << GLPMCFG_L1RSMOK_Pos) // 0x00010000 +#define GLPMCFG_L1RSMOK GLPMCFG_L1RSMOK_Msk // Sleep State Resume OK #define GLPMCFG_LPMCHIDX_Pos (17U) -#define GLPMCFG_LPMCHIDX_Msk (0xFUL << GLPMCFG_LPMCHIDX_Pos) // 0x001E0000 */ -#define GLPMCFG_LPMCHIDX GLPMCFG_LPMCHIDX_Msk // LPM Channel Index */ +#define GLPMCFG_LPMCHIDX_Msk (0xFUL << GLPMCFG_LPMCHIDX_Pos) // 0x001E0000 +#define GLPMCFG_LPMCHIDX GLPMCFG_LPMCHIDX_Msk // LPM Channel Index #define GLPMCFG_LPMRCNT_Pos (21U) -#define GLPMCFG_LPMRCNT_Msk (0x7UL << GLPMCFG_LPMRCNT_Pos) // 0x00E00000 */ -#define GLPMCFG_LPMRCNT GLPMCFG_LPMRCNT_Msk // LPM retry count */ +#define GLPMCFG_LPMRCNT_Msk (0x7UL << GLPMCFG_LPMRCNT_Pos) // 0x00E00000 +#define GLPMCFG_LPMRCNT GLPMCFG_LPMRCNT_Msk // LPM retry count #define GLPMCFG_SNDLPM_Pos (24U) -#define GLPMCFG_SNDLPM_Msk (0x1UL << GLPMCFG_SNDLPM_Pos) // 0x01000000 */ -#define GLPMCFG_SNDLPM GLPMCFG_SNDLPM_Msk // Send LPM transaction */ +#define GLPMCFG_SNDLPM_Msk (0x1UL << GLPMCFG_SNDLPM_Pos) // 0x01000000 +#define GLPMCFG_SNDLPM GLPMCFG_SNDLPM_Msk // Send LPM transaction #define GLPMCFG_LPMRCNTSTS_Pos (25U) -#define GLPMCFG_LPMRCNTSTS_Msk (0x7UL << GLPMCFG_LPMRCNTSTS_Pos) // 0x0E000000 */ -#define GLPMCFG_LPMRCNTSTS GLPMCFG_LPMRCNTSTS_Msk // LPM retry count status */ +#define GLPMCFG_LPMRCNTSTS_Msk (0x7UL << GLPMCFG_LPMRCNTSTS_Pos) // 0x0E000000 +#define GLPMCFG_LPMRCNTSTS GLPMCFG_LPMRCNTSTS_Msk // LPM retry count status #define GLPMCFG_ENBESL_Pos (28U) -#define GLPMCFG_ENBESL_Msk (0x1UL << GLPMCFG_ENBESL_Pos) // 0x10000000 */ -#define GLPMCFG_ENBESL GLPMCFG_ENBESL_Msk // Enable best effort service latency */ +#define GLPMCFG_ENBESL_Msk (0x1UL << GLPMCFG_ENBESL_Pos) // 0x10000000 +#define GLPMCFG_ENBESL GLPMCFG_ENBESL_Msk // Enable best effort service latency /******************** Bit definition for DIEPEACHMSK1 register ********************/ #define DIEPEACHMSK1_XFRCM_Pos (0U) -#define DIEPEACHMSK1_XFRCM_Msk (0x1UL << DIEPEACHMSK1_XFRCM_Pos) // 0x00000001 */ -#define DIEPEACHMSK1_XFRCM DIEPEACHMSK1_XFRCM_Msk // Transfer completed interrupt mask */ +#define DIEPEACHMSK1_XFRCM_Msk (0x1UL << DIEPEACHMSK1_XFRCM_Pos) // 0x00000001 +#define DIEPEACHMSK1_XFRCM DIEPEACHMSK1_XFRCM_Msk // Transfer completed interrupt mask #define DIEPEACHMSK1_EPDM_Pos (1U) -#define DIEPEACHMSK1_EPDM_Msk (0x1UL << DIEPEACHMSK1_EPDM_Pos) // 0x00000002 */ -#define DIEPEACHMSK1_EPDM DIEPEACHMSK1_EPDM_Msk // Endpoint disabled interrupt mask */ +#define DIEPEACHMSK1_EPDM_Msk (0x1UL << DIEPEACHMSK1_EPDM_Pos) // 0x00000002 +#define DIEPEACHMSK1_EPDM DIEPEACHMSK1_EPDM_Msk // Endpoint disabled interrupt mask #define DIEPEACHMSK1_TOM_Pos (3U) -#define DIEPEACHMSK1_TOM_Msk (0x1UL << DIEPEACHMSK1_TOM_Pos) // 0x00000008 */ -#define DIEPEACHMSK1_TOM DIEPEACHMSK1_TOM_Msk // Timeout condition mask (nonisochronous endpoints) */ +#define DIEPEACHMSK1_TOM_Msk (0x1UL << DIEPEACHMSK1_TOM_Pos) // 0x00000008 +#define DIEPEACHMSK1_TOM DIEPEACHMSK1_TOM_Msk // Timeout condition mask (nonisochronous endpoints) #define DIEPEACHMSK1_ITTXFEMSK_Pos (4U) -#define DIEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << DIEPEACHMSK1_ITTXFEMSK_Pos) // 0x00000010 */ -#define DIEPEACHMSK1_ITTXFEMSK DIEPEACHMSK1_ITTXFEMSK_Msk // IN token received when TxFIFO empty mask */ +#define DIEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << DIEPEACHMSK1_ITTXFEMSK_Pos) // 0x00000010 +#define DIEPEACHMSK1_ITTXFEMSK DIEPEACHMSK1_ITTXFEMSK_Msk // IN token received when TxFIFO empty mask #define DIEPEACHMSK1_INEPNMM_Pos (5U) -#define DIEPEACHMSK1_INEPNMM_Msk (0x1UL << DIEPEACHMSK1_INEPNMM_Pos) // 0x00000020 */ -#define DIEPEACHMSK1_INEPNMM DIEPEACHMSK1_INEPNMM_Msk // IN token received with EP mismatch mask */ +#define DIEPEACHMSK1_INEPNMM_Msk (0x1UL << DIEPEACHMSK1_INEPNMM_Pos) // 0x00000020 +#define DIEPEACHMSK1_INEPNMM DIEPEACHMSK1_INEPNMM_Msk // IN token received with EP mismatch mask #define DIEPEACHMSK1_INEPNEM_Pos (6U) -#define DIEPEACHMSK1_INEPNEM_Msk (0x1UL << DIEPEACHMSK1_INEPNEM_Pos) // 0x00000040 */ -#define DIEPEACHMSK1_INEPNEM DIEPEACHMSK1_INEPNEM_Msk // IN endpoint NAK effective mask */ +#define DIEPEACHMSK1_INEPNEM_Msk (0x1UL << DIEPEACHMSK1_INEPNEM_Pos) // 0x00000040 +#define DIEPEACHMSK1_INEPNEM DIEPEACHMSK1_INEPNEM_Msk // IN endpoint NAK effective mask #define DIEPEACHMSK1_TXFURM_Pos (8U) -#define DIEPEACHMSK1_TXFURM_Msk (0x1UL << DIEPEACHMSK1_TXFURM_Pos) // 0x00000100 */ -#define DIEPEACHMSK1_TXFURM DIEPEACHMSK1_TXFURM_Msk // FIFO underrun mask */ +#define DIEPEACHMSK1_TXFURM_Msk (0x1UL << DIEPEACHMSK1_TXFURM_Pos) // 0x00000100 +#define DIEPEACHMSK1_TXFURM DIEPEACHMSK1_TXFURM_Msk // FIFO underrun mask #define DIEPEACHMSK1_BIM_Pos (9U) -#define DIEPEACHMSK1_BIM_Msk (0x1UL << DIEPEACHMSK1_BIM_Pos) // 0x00000200 */ -#define DIEPEACHMSK1_BIM DIEPEACHMSK1_BIM_Msk // BNA interrupt mask */ +#define DIEPEACHMSK1_BIM_Msk (0x1UL << DIEPEACHMSK1_BIM_Pos) // 0x00000200 +#define DIEPEACHMSK1_BIM DIEPEACHMSK1_BIM_Msk // BNA interrupt mask #define DIEPEACHMSK1_NAKM_Pos (13U) -#define DIEPEACHMSK1_NAKM_Msk (0x1UL << DIEPEACHMSK1_NAKM_Pos) // 0x00002000 */ -#define DIEPEACHMSK1_NAKM DIEPEACHMSK1_NAKM_Msk // NAK interrupt mask */ +#define DIEPEACHMSK1_NAKM_Msk (0x1UL << DIEPEACHMSK1_NAKM_Pos) // 0x00002000 +#define DIEPEACHMSK1_NAKM DIEPEACHMSK1_NAKM_Msk // NAK interrupt mask /******************** Bit definition for HPRT register ********************/ #define HPRT_PCSTS_Pos (0U) -#define HPRT_PCSTS_Msk (0x1UL << HPRT_PCSTS_Pos) // 0x00000001 */ -#define HPRT_PCSTS HPRT_PCSTS_Msk // Port connect status */ +#define HPRT_PCSTS_Msk (0x1UL << HPRT_PCSTS_Pos) // 0x00000001 +#define HPRT_PCSTS HPRT_PCSTS_Msk // Port connect status #define HPRT_PCDET_Pos (1U) -#define HPRT_PCDET_Msk (0x1UL << HPRT_PCDET_Pos) // 0x00000002 */ -#define HPRT_PCDET HPRT_PCDET_Msk // Port connect detected */ +#define HPRT_PCDET_Msk (0x1UL << HPRT_PCDET_Pos) // 0x00000002 +#define HPRT_PCDET HPRT_PCDET_Msk // Port connect detected #define HPRT_PENA_Pos (2U) -#define HPRT_PENA_Msk (0x1UL << HPRT_PENA_Pos) // 0x00000004 */ -#define HPRT_PENA HPRT_PENA_Msk // Port enable */ +#define HPRT_PENA_Msk (0x1UL << HPRT_PENA_Pos) // 0x00000004 +#define HPRT_PENA HPRT_PENA_Msk // Port enable #define HPRT_PENCHNG_Pos (3U) -#define HPRT_PENCHNG_Msk (0x1UL << HPRT_PENCHNG_Pos) // 0x00000008 */ -#define HPRT_PENCHNG HPRT_PENCHNG_Msk // Port enable/disable change */ +#define HPRT_PENCHNG_Msk (0x1UL << HPRT_PENCHNG_Pos) // 0x00000008 +#define HPRT_PENCHNG HPRT_PENCHNG_Msk // Port enable/disable change #define HPRT_POCA_Pos (4U) -#define HPRT_POCA_Msk (0x1UL << HPRT_POCA_Pos) // 0x00000010 */ -#define HPRT_POCA HPRT_POCA_Msk // Port overcurrent active */ +#define HPRT_POCA_Msk (0x1UL << HPRT_POCA_Pos) // 0x00000010 +#define HPRT_POCA HPRT_POCA_Msk // Port overcurrent active #define HPRT_POCCHNG_Pos (5U) -#define HPRT_POCCHNG_Msk (0x1UL << HPRT_POCCHNG_Pos) // 0x00000020 */ -#define HPRT_POCCHNG HPRT_POCCHNG_Msk // Port overcurrent change */ +#define HPRT_POCCHNG_Msk (0x1UL << HPRT_POCCHNG_Pos) // 0x00000020 +#define HPRT_POCCHNG HPRT_POCCHNG_Msk // Port overcurrent change #define HPRT_PRES_Pos (6U) -#define HPRT_PRES_Msk (0x1UL << HPRT_PRES_Pos) // 0x00000040 */ -#define HPRT_PRES HPRT_PRES_Msk // Port resume */ +#define HPRT_PRES_Msk (0x1UL << HPRT_PRES_Pos) // 0x00000040 +#define HPRT_PRES HPRT_PRES_Msk // Port resume #define HPRT_PSUSP_Pos (7U) -#define HPRT_PSUSP_Msk (0x1UL << HPRT_PSUSP_Pos) // 0x00000080 */ -#define HPRT_PSUSP HPRT_PSUSP_Msk // Port suspend */ +#define HPRT_PSUSP_Msk (0x1UL << HPRT_PSUSP_Pos) // 0x00000080 +#define HPRT_PSUSP HPRT_PSUSP_Msk // Port suspend #define HPRT_PRST_Pos (8U) -#define HPRT_PRST_Msk (0x1UL << HPRT_PRST_Pos) // 0x00000100 */ -#define HPRT_PRST HPRT_PRST_Msk // Port reset */ +#define HPRT_PRST_Msk (0x1UL << HPRT_PRST_Pos) // 0x00000100 +#define HPRT_PRST HPRT_PRST_Msk // Port reset #define HPRT_PLSTS_Pos (10U) -#define HPRT_PLSTS_Msk (0x3UL << HPRT_PLSTS_Pos) // 0x00000C00 */ -#define HPRT_PLSTS HPRT_PLSTS_Msk // Port line status */ -#define HPRT_PLSTS_0 (0x1UL << HPRT_PLSTS_Pos) // 0x00000400 */ -#define HPRT_PLSTS_1 (0x2UL << HPRT_PLSTS_Pos) // 0x00000800 */ +#define HPRT_PLSTS_Msk (0x3UL << HPRT_PLSTS_Pos) // 0x00000C00 +#define HPRT_PLSTS HPRT_PLSTS_Msk // Port line status +#define HPRT_PLSTS_0 (0x1UL << HPRT_PLSTS_Pos) // 0x00000400 +#define HPRT_PLSTS_1 (0x2UL << HPRT_PLSTS_Pos) // 0x00000800 #define HPRT_PPWR_Pos (12U) -#define HPRT_PPWR_Msk (0x1UL << HPRT_PPWR_Pos) // 0x00001000 */ -#define HPRT_PPWR HPRT_PPWR_Msk // Port power */ +#define HPRT_PPWR_Msk (0x1UL << HPRT_PPWR_Pos) // 0x00001000 +#define HPRT_PPWR HPRT_PPWR_Msk // Port power #define HPRT_PTCTL_Pos (13U) -#define HPRT_PTCTL_Msk (0xFUL << HPRT_PTCTL_Pos) // 0x0001E000 */ -#define HPRT_PTCTL HPRT_PTCTL_Msk // Port test control */ -#define HPRT_PTCTL_0 (0x1UL << HPRT_PTCTL_Pos) // 0x00002000 */ -#define HPRT_PTCTL_1 (0x2UL << HPRT_PTCTL_Pos) // 0x00004000 */ -#define HPRT_PTCTL_2 (0x4UL << HPRT_PTCTL_Pos) // 0x00008000 */ -#define HPRT_PTCTL_3 (0x8UL << HPRT_PTCTL_Pos) // 0x00010000 */ +#define HPRT_PTCTL_Msk (0xFUL << HPRT_PTCTL_Pos) // 0x0001E000 +#define HPRT_PTCTL HPRT_PTCTL_Msk // Port test control +#define HPRT_PTCTL_0 (0x1UL << HPRT_PTCTL_Pos) // 0x00002000 +#define HPRT_PTCTL_1 (0x2UL << HPRT_PTCTL_Pos) // 0x00004000 +#define HPRT_PTCTL_2 (0x4UL << HPRT_PTCTL_Pos) // 0x00008000 +#define HPRT_PTCTL_3 (0x8UL << HPRT_PTCTL_Pos) // 0x00010000 #define HPRT_PSPD_Pos (17U) -#define HPRT_PSPD_Msk (0x3UL << HPRT_PSPD_Pos) // 0x00060000 */ -#define HPRT_PSPD HPRT_PSPD_Msk // Port speed */ -#define HPRT_PSPD_0 (0x1UL << HPRT_PSPD_Pos) // 0x00020000 */ -#define HPRT_PSPD_1 (0x2UL << HPRT_PSPD_Pos) // 0x00040000 */ +#define HPRT_PSPD_Msk (0x3UL << HPRT_PSPD_Pos) // 0x00060000 +#define HPRT_PSPD HPRT_PSPD_Msk // Port speed +#define HPRT_PSPD_0 (0x1UL << HPRT_PSPD_Pos) // 0x00020000 +#define HPRT_PSPD_1 (0x2UL << HPRT_PSPD_Pos) // 0x00040000 /******************** Bit definition for DOEPEACHMSK1 register ********************/ #define DOEPEACHMSK1_XFRCM_Pos (0U) -#define DOEPEACHMSK1_XFRCM_Msk (0x1UL << DOEPEACHMSK1_XFRCM_Pos) // 0x00000001 */ -#define DOEPEACHMSK1_XFRCM DOEPEACHMSK1_XFRCM_Msk // Transfer completed interrupt mask */ +#define DOEPEACHMSK1_XFRCM_Msk (0x1UL << DOEPEACHMSK1_XFRCM_Pos) // 0x00000001 +#define DOEPEACHMSK1_XFRCM DOEPEACHMSK1_XFRCM_Msk // Transfer completed interrupt mask #define DOEPEACHMSK1_EPDM_Pos (1U) -#define DOEPEACHMSK1_EPDM_Msk (0x1UL << DOEPEACHMSK1_EPDM_Pos) // 0x00000002 */ -#define DOEPEACHMSK1_EPDM DOEPEACHMSK1_EPDM_Msk // Endpoint disabled interrupt mask */ +#define DOEPEACHMSK1_EPDM_Msk (0x1UL << DOEPEACHMSK1_EPDM_Pos) // 0x00000002 +#define DOEPEACHMSK1_EPDM DOEPEACHMSK1_EPDM_Msk // Endpoint disabled interrupt mask #define DOEPEACHMSK1_TOM_Pos (3U) -#define DOEPEACHMSK1_TOM_Msk (0x1UL << DOEPEACHMSK1_TOM_Pos) // 0x00000008 */ -#define DOEPEACHMSK1_TOM DOEPEACHMSK1_TOM_Msk // Timeout condition mask */ +#define DOEPEACHMSK1_TOM_Msk (0x1UL << DOEPEACHMSK1_TOM_Pos) // 0x00000008 +#define DOEPEACHMSK1_TOM DOEPEACHMSK1_TOM_Msk // Timeout condition mask #define DOEPEACHMSK1_ITTXFEMSK_Pos (4U) -#define DOEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << DOEPEACHMSK1_ITTXFEMSK_Pos) // 0x00000010 */ -#define DOEPEACHMSK1_ITTXFEMSK DOEPEACHMSK1_ITTXFEMSK_Msk // IN token received when TxFIFO empty mask */ +#define DOEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << DOEPEACHMSK1_ITTXFEMSK_Pos) // 0x00000010 +#define DOEPEACHMSK1_ITTXFEMSK DOEPEACHMSK1_ITTXFEMSK_Msk // IN token received when TxFIFO empty mask #define DOEPEACHMSK1_INEPNMM_Pos (5U) -#define DOEPEACHMSK1_INEPNMM_Msk (0x1UL << DOEPEACHMSK1_INEPNMM_Pos) // 0x00000020 */ -#define DOEPEACHMSK1_INEPNMM DOEPEACHMSK1_INEPNMM_Msk // IN token received with EP mismatch mask */ +#define DOEPEACHMSK1_INEPNMM_Msk (0x1UL << DOEPEACHMSK1_INEPNMM_Pos) // 0x00000020 +#define DOEPEACHMSK1_INEPNMM DOEPEACHMSK1_INEPNMM_Msk // IN token received with EP mismatch mask #define DOEPEACHMSK1_INEPNEM_Pos (6U) -#define DOEPEACHMSK1_INEPNEM_Msk (0x1UL << DOEPEACHMSK1_INEPNEM_Pos) // 0x00000040 */ -#define DOEPEACHMSK1_INEPNEM DOEPEACHMSK1_INEPNEM_Msk // IN endpoint NAK effective mask */ +#define DOEPEACHMSK1_INEPNEM_Msk (0x1UL << DOEPEACHMSK1_INEPNEM_Pos) // 0x00000040 +#define DOEPEACHMSK1_INEPNEM DOEPEACHMSK1_INEPNEM_Msk // IN endpoint NAK effective mask #define DOEPEACHMSK1_TXFURM_Pos (8U) -#define DOEPEACHMSK1_TXFURM_Msk (0x1UL << DOEPEACHMSK1_TXFURM_Pos) // 0x00000100 */ -#define DOEPEACHMSK1_TXFURM DOEPEACHMSK1_TXFURM_Msk // OUT packet error mask */ +#define DOEPEACHMSK1_TXFURM_Msk (0x1UL << DOEPEACHMSK1_TXFURM_Pos) // 0x00000100 +#define DOEPEACHMSK1_TXFURM DOEPEACHMSK1_TXFURM_Msk // OUT packet error mask #define DOEPEACHMSK1_BIM_Pos (9U) -#define DOEPEACHMSK1_BIM_Msk (0x1UL << DOEPEACHMSK1_BIM_Pos) // 0x00000200 */ -#define DOEPEACHMSK1_BIM DOEPEACHMSK1_BIM_Msk // BNA interrupt mask */ +#define DOEPEACHMSK1_BIM_Msk (0x1UL << DOEPEACHMSK1_BIM_Pos) // 0x00000200 +#define DOEPEACHMSK1_BIM DOEPEACHMSK1_BIM_Msk // BNA interrupt mask #define DOEPEACHMSK1_BERRM_Pos (12U) -#define DOEPEACHMSK1_BERRM_Msk (0x1UL << DOEPEACHMSK1_BERRM_Pos) // 0x00001000 */ -#define DOEPEACHMSK1_BERRM DOEPEACHMSK1_BERRM_Msk // Bubble error interrupt mask */ +#define DOEPEACHMSK1_BERRM_Msk (0x1UL << DOEPEACHMSK1_BERRM_Pos) // 0x00001000 +#define DOEPEACHMSK1_BERRM DOEPEACHMSK1_BERRM_Msk // Bubble error interrupt mask #define DOEPEACHMSK1_NAKM_Pos (13U) -#define DOEPEACHMSK1_NAKM_Msk (0x1UL << DOEPEACHMSK1_NAKM_Pos) // 0x00002000 */ -#define DOEPEACHMSK1_NAKM DOEPEACHMSK1_NAKM_Msk // NAK interrupt mask */ +#define DOEPEACHMSK1_NAKM_Msk (0x1UL << DOEPEACHMSK1_NAKM_Pos) // 0x00002000 +#define DOEPEACHMSK1_NAKM DOEPEACHMSK1_NAKM_Msk // NAK interrupt mask #define DOEPEACHMSK1_NYETM_Pos (14U) -#define DOEPEACHMSK1_NYETM_Msk (0x1UL << DOEPEACHMSK1_NYETM_Pos) // 0x00004000 */ -#define DOEPEACHMSK1_NYETM DOEPEACHMSK1_NYETM_Msk // NYET interrupt mask */ +#define DOEPEACHMSK1_NYETM_Msk (0x1UL << DOEPEACHMSK1_NYETM_Pos) // 0x00004000 +#define DOEPEACHMSK1_NYETM DOEPEACHMSK1_NYETM_Msk // NYET interrupt mask /******************** Bit definition for HPTXFSIZ register ********************/ #define HPTXFSIZ_PTXSA_Pos (0U) -#define HPTXFSIZ_PTXSA_Msk (0xFFFFUL << HPTXFSIZ_PTXSA_Pos) // 0x0000FFFF */ -#define HPTXFSIZ_PTXSA HPTXFSIZ_PTXSA_Msk // Host periodic TxFIFO start address */ +#define HPTXFSIZ_PTXSA_Msk (0xFFFFUL << HPTXFSIZ_PTXSA_Pos) // 0x0000FFFF +#define HPTXFSIZ_PTXSA HPTXFSIZ_PTXSA_Msk // Host periodic TxFIFO start address #define HPTXFSIZ_PTXFD_Pos (16U) -#define HPTXFSIZ_PTXFD_Msk (0xFFFFUL << HPTXFSIZ_PTXFD_Pos) // 0xFFFF0000 */ -#define HPTXFSIZ_PTXFD HPTXFSIZ_PTXFD_Msk // Host periodic TxFIFO depth */ +#define HPTXFSIZ_PTXFD_Msk (0xFFFFUL << HPTXFSIZ_PTXFD_Pos) // 0xFFFF0000 +#define HPTXFSIZ_PTXFD HPTXFSIZ_PTXFD_Msk // Host periodic TxFIFO depth /******************** Bit definition for DIEPCTL register ********************/ #define DIEPCTL_MPSIZ_Pos (0U) -#define DIEPCTL_MPSIZ_Msk (0x7FFUL << DIEPCTL_MPSIZ_Pos) // 0x000007FF */ -#define DIEPCTL_MPSIZ DIEPCTL_MPSIZ_Msk // Maximum packet size */ +#define DIEPCTL_MPSIZ_Msk (0x7FFUL << DIEPCTL_MPSIZ_Pos) // 0x000007FF +#define DIEPCTL_MPSIZ DIEPCTL_MPSIZ_Msk // Maximum packet size #define DIEPCTL_USBAEP_Pos (15U) -#define DIEPCTL_USBAEP_Msk (0x1UL << DIEPCTL_USBAEP_Pos) // 0x00008000 */ -#define DIEPCTL_USBAEP DIEPCTL_USBAEP_Msk // USB active endpoint */ +#define DIEPCTL_USBAEP_Msk (0x1UL << DIEPCTL_USBAEP_Pos) // 0x00008000 +#define DIEPCTL_USBAEP DIEPCTL_USBAEP_Msk // USB active endpoint #define DIEPCTL_EONUM_DPID_Pos (16U) -#define DIEPCTL_EONUM_DPID_Msk (0x1UL << DIEPCTL_EONUM_DPID_Pos) // 0x00010000 */ -#define DIEPCTL_EONUM_DPID DIEPCTL_EONUM_DPID_Msk // Even/odd frame */ +#define DIEPCTL_EONUM_DPID_Msk (0x1UL << DIEPCTL_EONUM_DPID_Pos) // 0x00010000 +#define DIEPCTL_EONUM_DPID DIEPCTL_EONUM_DPID_Msk // Even/odd frame #define DIEPCTL_NAKSTS_Pos (17U) -#define DIEPCTL_NAKSTS_Msk (0x1UL << DIEPCTL_NAKSTS_Pos) // 0x00020000 */ -#define DIEPCTL_NAKSTS DIEPCTL_NAKSTS_Msk // NAK status */ +#define DIEPCTL_NAKSTS_Msk (0x1UL << DIEPCTL_NAKSTS_Pos) // 0x00020000 +#define DIEPCTL_NAKSTS DIEPCTL_NAKSTS_Msk // NAK status #define DIEPCTL_EPTYP_Pos (18U) -#define DIEPCTL_EPTYP_Msk (0x3UL << DIEPCTL_EPTYP_Pos) // 0x000C0000 */ -#define DIEPCTL_EPTYP DIEPCTL_EPTYP_Msk // Endpoint type */ -#define DIEPCTL_EPTYP_0 (0x1UL << DIEPCTL_EPTYP_Pos) // 0x00040000 */ -#define DIEPCTL_EPTYP_1 (0x2UL << DIEPCTL_EPTYP_Pos) // 0x00080000 */ +#define DIEPCTL_EPTYP_Msk (0x3UL << DIEPCTL_EPTYP_Pos) // 0x000C0000 +#define DIEPCTL_EPTYP DIEPCTL_EPTYP_Msk // Endpoint type +#define DIEPCTL_EPTYP_0 (0x1UL << DIEPCTL_EPTYP_Pos) // 0x00040000 +#define DIEPCTL_EPTYP_1 (0x2UL << DIEPCTL_EPTYP_Pos) // 0x00080000 #define DIEPCTL_STALL_Pos (21U) -#define DIEPCTL_STALL_Msk (0x1UL << DIEPCTL_STALL_Pos) // 0x00200000 */ -#define DIEPCTL_STALL DIEPCTL_STALL_Msk // STALL handshake */ +#define DIEPCTL_STALL_Msk (0x1UL << DIEPCTL_STALL_Pos) // 0x00200000 +#define DIEPCTL_STALL DIEPCTL_STALL_Msk // STALL handshake #define DIEPCTL_TXFNUM_Pos (22U) -#define DIEPCTL_TXFNUM_Msk (0xFUL << DIEPCTL_TXFNUM_Pos) // 0x03C00000 */ -#define DIEPCTL_TXFNUM DIEPCTL_TXFNUM_Msk // TxFIFO number */ -#define DIEPCTL_TXFNUM_0 (0x1UL << DIEPCTL_TXFNUM_Pos) // 0x00400000 */ -#define DIEPCTL_TXFNUM_1 (0x2UL << DIEPCTL_TXFNUM_Pos) // 0x00800000 */ -#define DIEPCTL_TXFNUM_2 (0x4UL << DIEPCTL_TXFNUM_Pos) // 0x01000000 */ -#define DIEPCTL_TXFNUM_3 (0x8UL << DIEPCTL_TXFNUM_Pos) // 0x02000000 */ +#define DIEPCTL_TXFNUM_Msk (0xFUL << DIEPCTL_TXFNUM_Pos) // 0x03C00000 +#define DIEPCTL_TXFNUM DIEPCTL_TXFNUM_Msk // TxFIFO number +#define DIEPCTL_TXFNUM_0 (0x1UL << DIEPCTL_TXFNUM_Pos) // 0x00400000 +#define DIEPCTL_TXFNUM_1 (0x2UL << DIEPCTL_TXFNUM_Pos) // 0x00800000 +#define DIEPCTL_TXFNUM_2 (0x4UL << DIEPCTL_TXFNUM_Pos) // 0x01000000 +#define DIEPCTL_TXFNUM_3 (0x8UL << DIEPCTL_TXFNUM_Pos) // 0x02000000 #define DIEPCTL_CNAK_Pos (26U) -#define DIEPCTL_CNAK_Msk (0x1UL << DIEPCTL_CNAK_Pos) // 0x04000000 */ -#define DIEPCTL_CNAK DIEPCTL_CNAK_Msk // Clear NAK */ +#define DIEPCTL_CNAK_Msk (0x1UL << DIEPCTL_CNAK_Pos) // 0x04000000 +#define DIEPCTL_CNAK DIEPCTL_CNAK_Msk // Clear NAK #define DIEPCTL_SNAK_Pos (27U) -#define DIEPCTL_SNAK_Msk (0x1UL << DIEPCTL_SNAK_Pos) // 0x08000000 */ -#define DIEPCTL_SNAK DIEPCTL_SNAK_Msk // Set NAK */ +#define DIEPCTL_SNAK_Msk (0x1UL << DIEPCTL_SNAK_Pos) // 0x08000000 +#define DIEPCTL_SNAK DIEPCTL_SNAK_Msk // Set NAK #define DIEPCTL_SD0PID_SEVNFRM_Pos (28U) -#define DIEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << DIEPCTL_SD0PID_SEVNFRM_Pos) // 0x10000000 */ -#define DIEPCTL_SD0PID_SEVNFRM DIEPCTL_SD0PID_SEVNFRM_Msk // Set DATA0 PID */ +#define DIEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << DIEPCTL_SD0PID_SEVNFRM_Pos) // 0x10000000 +#define DIEPCTL_SD0PID_SEVNFRM DIEPCTL_SD0PID_SEVNFRM_Msk // Set DATA0 PID #define DIEPCTL_SODDFRM_Pos (29U) -#define DIEPCTL_SODDFRM_Msk (0x1UL << DIEPCTL_SODDFRM_Pos) // 0x20000000 */ -#define DIEPCTL_SODDFRM DIEPCTL_SODDFRM_Msk // Set odd frame */ +#define DIEPCTL_SODDFRM_Msk (0x1UL << DIEPCTL_SODDFRM_Pos) // 0x20000000 +#define DIEPCTL_SODDFRM DIEPCTL_SODDFRM_Msk // Set odd frame #define DIEPCTL_EPDIS_Pos (30U) -#define DIEPCTL_EPDIS_Msk (0x1UL << DIEPCTL_EPDIS_Pos) // 0x40000000 */ -#define DIEPCTL_EPDIS DIEPCTL_EPDIS_Msk // Endpoint disable */ +#define DIEPCTL_EPDIS_Msk (0x1UL << DIEPCTL_EPDIS_Pos) // 0x40000000 +#define DIEPCTL_EPDIS DIEPCTL_EPDIS_Msk // Endpoint disable #define DIEPCTL_EPENA_Pos (31U) -#define DIEPCTL_EPENA_Msk (0x1UL << DIEPCTL_EPENA_Pos) // 0x80000000 */ -#define DIEPCTL_EPENA DIEPCTL_EPENA_Msk // Endpoint enable */ +#define DIEPCTL_EPENA_Msk (0x1UL << DIEPCTL_EPENA_Pos) // 0x80000000 +#define DIEPCTL_EPENA DIEPCTL_EPENA_Msk // Endpoint enable /******************** Bit definition for HCCHAR register ********************/ #define HCCHAR_MPSIZ_Pos (0U) -#define HCCHAR_MPSIZ_Msk (0x7FFUL << HCCHAR_MPSIZ_Pos) // 0x000007FF */ -#define HCCHAR_MPSIZ HCCHAR_MPSIZ_Msk // Maximum packet size */ +#define HCCHAR_MPSIZ_Msk (0x7FFUL << HCCHAR_MPSIZ_Pos) // 0x000007FF +#define HCCHAR_MPSIZ HCCHAR_MPSIZ_Msk // Maximum packet size #define HCCHAR_EPNUM_Pos (11U) -#define HCCHAR_EPNUM_Msk (0xFUL << HCCHAR_EPNUM_Pos) // 0x00007800 */ -#define HCCHAR_EPNUM HCCHAR_EPNUM_Msk // Endpoint number */ -#define HCCHAR_EPNUM_0 (0x1UL << HCCHAR_EPNUM_Pos) // 0x00000800 */ -#define HCCHAR_EPNUM_1 (0x2UL << HCCHAR_EPNUM_Pos) // 0x00001000 */ -#define HCCHAR_EPNUM_2 (0x4UL << HCCHAR_EPNUM_Pos) // 0x00002000 */ -#define HCCHAR_EPNUM_3 (0x8UL << HCCHAR_EPNUM_Pos) // 0x00004000 */ +#define HCCHAR_EPNUM_Msk (0xFUL << HCCHAR_EPNUM_Pos) // 0x00007800 +#define HCCHAR_EPNUM HCCHAR_EPNUM_Msk // Endpoint number +#define HCCHAR_EPNUM_0 (0x1UL << HCCHAR_EPNUM_Pos) // 0x00000800 +#define HCCHAR_EPNUM_1 (0x2UL << HCCHAR_EPNUM_Pos) // 0x00001000 +#define HCCHAR_EPNUM_2 (0x4UL << HCCHAR_EPNUM_Pos) // 0x00002000 +#define HCCHAR_EPNUM_3 (0x8UL << HCCHAR_EPNUM_Pos) // 0x00004000 #define HCCHAR_EPDIR_Pos (15U) -#define HCCHAR_EPDIR_Msk (0x1UL << HCCHAR_EPDIR_Pos) // 0x00008000 */ -#define HCCHAR_EPDIR HCCHAR_EPDIR_Msk // Endpoint direction */ +#define HCCHAR_EPDIR_Msk (0x1UL << HCCHAR_EPDIR_Pos) // 0x00008000 +#define HCCHAR_EPDIR HCCHAR_EPDIR_Msk // Endpoint direction #define HCCHAR_LSDEV_Pos (17U) -#define HCCHAR_LSDEV_Msk (0x1UL << HCCHAR_LSDEV_Pos) // 0x00020000 */ -#define HCCHAR_LSDEV HCCHAR_LSDEV_Msk // Low-speed device */ +#define HCCHAR_LSDEV_Msk (0x1UL << HCCHAR_LSDEV_Pos) // 0x00020000 +#define HCCHAR_LSDEV HCCHAR_LSDEV_Msk // Low-speed device #define HCCHAR_EPTYP_Pos (18U) -#define HCCHAR_EPTYP_Msk (0x3UL << HCCHAR_EPTYP_Pos) // 0x000C0000 */ -#define HCCHAR_EPTYP HCCHAR_EPTYP_Msk // Endpoint type */ -#define HCCHAR_EPTYP_0 (0x1UL << HCCHAR_EPTYP_Pos) // 0x00040000 */ -#define HCCHAR_EPTYP_1 (0x2UL << HCCHAR_EPTYP_Pos) // 0x00080000 */ +#define HCCHAR_EPTYP_Msk (0x3UL << HCCHAR_EPTYP_Pos) // 0x000C0000 +#define HCCHAR_EPTYP HCCHAR_EPTYP_Msk // Endpoint type +#define HCCHAR_EPTYP_0 (0x1UL << HCCHAR_EPTYP_Pos) // 0x00040000 +#define HCCHAR_EPTYP_1 (0x2UL << HCCHAR_EPTYP_Pos) // 0x00080000 #define HCCHAR_MC_Pos (20U) -#define HCCHAR_MC_Msk (0x3UL << HCCHAR_MC_Pos) // 0x00300000 */ -#define HCCHAR_MC HCCHAR_MC_Msk // Multi Count (MC) / Error Count (EC) */ -#define HCCHAR_MC_0 (0x1UL << HCCHAR_MC_Pos) // 0x00100000 */ -#define HCCHAR_MC_1 (0x2UL << HCCHAR_MC_Pos) // 0x00200000 */ +#define HCCHAR_MC_Msk (0x3UL << HCCHAR_MC_Pos) // 0x00300000 +#define HCCHAR_MC HCCHAR_MC_Msk // Multi Count (MC) / Error Count (EC) +#define HCCHAR_MC_0 (0x1UL << HCCHAR_MC_Pos) // 0x00100000 +#define HCCHAR_MC_1 (0x2UL << HCCHAR_MC_Pos) // 0x00200000 #define HCCHAR_DAD_Pos (22U) -#define HCCHAR_DAD_Msk (0x7FUL << HCCHAR_DAD_Pos) // 0x1FC00000 */ -#define HCCHAR_DAD HCCHAR_DAD_Msk // Device address */ -#define HCCHAR_DAD_0 (0x01UL << HCCHAR_DAD_Pos) // 0x00400000 */ -#define HCCHAR_DAD_1 (0x02UL << HCCHAR_DAD_Pos) // 0x00800000 */ -#define HCCHAR_DAD_2 (0x04UL << HCCHAR_DAD_Pos) // 0x01000000 */ -#define HCCHAR_DAD_3 (0x08UL << HCCHAR_DAD_Pos) // 0x02000000 */ -#define HCCHAR_DAD_4 (0x10UL << HCCHAR_DAD_Pos) // 0x04000000 */ -#define HCCHAR_DAD_5 (0x20UL << HCCHAR_DAD_Pos) // 0x08000000 */ -#define HCCHAR_DAD_6 (0x40UL << HCCHAR_DAD_Pos) // 0x10000000 */ +#define HCCHAR_DAD_Msk (0x7FUL << HCCHAR_DAD_Pos) // 0x1FC00000 +#define HCCHAR_DAD HCCHAR_DAD_Msk // Device address +#define HCCHAR_DAD_0 (0x01UL << HCCHAR_DAD_Pos) // 0x00400000 +#define HCCHAR_DAD_1 (0x02UL << HCCHAR_DAD_Pos) // 0x00800000 +#define HCCHAR_DAD_2 (0x04UL << HCCHAR_DAD_Pos) // 0x01000000 +#define HCCHAR_DAD_3 (0x08UL << HCCHAR_DAD_Pos) // 0x02000000 +#define HCCHAR_DAD_4 (0x10UL << HCCHAR_DAD_Pos) // 0x04000000 +#define HCCHAR_DAD_5 (0x20UL << HCCHAR_DAD_Pos) // 0x08000000 +#define HCCHAR_DAD_6 (0x40UL << HCCHAR_DAD_Pos) // 0x10000000 #define HCCHAR_ODDFRM_Pos (29U) -#define HCCHAR_ODDFRM_Msk (0x1UL << HCCHAR_ODDFRM_Pos) // 0x20000000 */ -#define HCCHAR_ODDFRM HCCHAR_ODDFRM_Msk // Odd frame */ +#define HCCHAR_ODDFRM_Msk (0x1UL << HCCHAR_ODDFRM_Pos) // 0x20000000 +#define HCCHAR_ODDFRM HCCHAR_ODDFRM_Msk // Odd frame #define HCCHAR_CHDIS_Pos (30U) -#define HCCHAR_CHDIS_Msk (0x1UL << HCCHAR_CHDIS_Pos) // 0x40000000 */ -#define HCCHAR_CHDIS HCCHAR_CHDIS_Msk // Channel disable */ +#define HCCHAR_CHDIS_Msk (0x1UL << HCCHAR_CHDIS_Pos) // 0x40000000 +#define HCCHAR_CHDIS HCCHAR_CHDIS_Msk // Channel disable #define HCCHAR_CHENA_Pos (31U) -#define HCCHAR_CHENA_Msk (0x1UL << HCCHAR_CHENA_Pos) // 0x80000000 */ -#define HCCHAR_CHENA HCCHAR_CHENA_Msk // Channel enable */ +#define HCCHAR_CHENA_Msk (0x1UL << HCCHAR_CHENA_Pos) // 0x80000000 +#define HCCHAR_CHENA HCCHAR_CHENA_Msk // Channel enable /******************** Bit definition for HCSPLT register ********************/ #define HCSPLT_PRTADDR_Pos (0U) -#define HCSPLT_PRTADDR_Msk (0x7FUL << HCSPLT_PRTADDR_Pos) // 0x0000007F */ -#define HCSPLT_PRTADDR HCSPLT_PRTADDR_Msk // Port address */ -#define HCSPLT_PRTADDR_0 (0x01UL << HCSPLT_PRTADDR_Pos) // 0x00000001 */ -#define HCSPLT_PRTADDR_1 (0x02UL << HCSPLT_PRTADDR_Pos) // 0x00000002 */ -#define HCSPLT_PRTADDR_2 (0x04UL << HCSPLT_PRTADDR_Pos) // 0x00000004 */ -#define HCSPLT_PRTADDR_3 (0x08UL << HCSPLT_PRTADDR_Pos) // 0x00000008 */ -#define HCSPLT_PRTADDR_4 (0x10UL << HCSPLT_PRTADDR_Pos) // 0x00000010 */ -#define HCSPLT_PRTADDR_5 (0x20UL << HCSPLT_PRTADDR_Pos) // 0x00000020 */ -#define HCSPLT_PRTADDR_6 (0x40UL << HCSPLT_PRTADDR_Pos) // 0x00000040 */ +#define HCSPLT_PRTADDR_Msk (0x7FUL << HCSPLT_PRTADDR_Pos) // 0x0000007F +#define HCSPLT_PRTADDR HCSPLT_PRTADDR_Msk // Port address +#define HCSPLT_PRTADDR_0 (0x01UL << HCSPLT_PRTADDR_Pos) // 0x00000001 +#define HCSPLT_PRTADDR_1 (0x02UL << HCSPLT_PRTADDR_Pos) // 0x00000002 +#define HCSPLT_PRTADDR_2 (0x04UL << HCSPLT_PRTADDR_Pos) // 0x00000004 +#define HCSPLT_PRTADDR_3 (0x08UL << HCSPLT_PRTADDR_Pos) // 0x00000008 +#define HCSPLT_PRTADDR_4 (0x10UL << HCSPLT_PRTADDR_Pos) // 0x00000010 +#define HCSPLT_PRTADDR_5 (0x20UL << HCSPLT_PRTADDR_Pos) // 0x00000020 +#define HCSPLT_PRTADDR_6 (0x40UL << HCSPLT_PRTADDR_Pos) // 0x00000040 #define HCSPLT_HUBADDR_Pos (7U) -#define HCSPLT_HUBADDR_Msk (0x7FUL << HCSPLT_HUBADDR_Pos) // 0x00003F80 */ -#define HCSPLT_HUBADDR HCSPLT_HUBADDR_Msk // Hub address */ -#define HCSPLT_HUBADDR_0 (0x01UL << HCSPLT_HUBADDR_Pos) // 0x00000080 */ -#define HCSPLT_HUBADDR_1 (0x02UL << HCSPLT_HUBADDR_Pos) // 0x00000100 */ -#define HCSPLT_HUBADDR_2 (0x04UL << HCSPLT_HUBADDR_Pos) // 0x00000200 */ -#define HCSPLT_HUBADDR_3 (0x08UL << HCSPLT_HUBADDR_Pos) // 0x00000400 */ -#define HCSPLT_HUBADDR_4 (0x10UL << HCSPLT_HUBADDR_Pos) // 0x00000800 */ -#define HCSPLT_HUBADDR_5 (0x20UL << HCSPLT_HUBADDR_Pos) // 0x00001000 */ -#define HCSPLT_HUBADDR_6 (0x40UL << HCSPLT_HUBADDR_Pos) // 0x00002000 */ +#define HCSPLT_HUBADDR_Msk (0x7FUL << HCSPLT_HUBADDR_Pos) // 0x00003F80 +#define HCSPLT_HUBADDR HCSPLT_HUBADDR_Msk // Hub address +#define HCSPLT_HUBADDR_0 (0x01UL << HCSPLT_HUBADDR_Pos) // 0x00000080 +#define HCSPLT_HUBADDR_1 (0x02UL << HCSPLT_HUBADDR_Pos) // 0x00000100 +#define HCSPLT_HUBADDR_2 (0x04UL << HCSPLT_HUBADDR_Pos) // 0x00000200 +#define HCSPLT_HUBADDR_3 (0x08UL << HCSPLT_HUBADDR_Pos) // 0x00000400 +#define HCSPLT_HUBADDR_4 (0x10UL << HCSPLT_HUBADDR_Pos) // 0x00000800 +#define HCSPLT_HUBADDR_5 (0x20UL << HCSPLT_HUBADDR_Pos) // 0x00001000 +#define HCSPLT_HUBADDR_6 (0x40UL << HCSPLT_HUBADDR_Pos) // 0x00002000 #define HCSPLT_XACTPOS_Pos (14U) -#define HCSPLT_XACTPOS_Msk (0x3UL << HCSPLT_XACTPOS_Pos) // 0x0000C000 */ -#define HCSPLT_XACTPOS HCSPLT_XACTPOS_Msk // XACTPOS */ -#define HCSPLT_XACTPOS_0 (0x1UL << HCSPLT_XACTPOS_Pos) // 0x00004000 */ -#define HCSPLT_XACTPOS_1 (0x2UL << HCSPLT_XACTPOS_Pos) // 0x00008000 */ +#define HCSPLT_XACTPOS_Msk (0x3UL << HCSPLT_XACTPOS_Pos) // 0x0000C000 +#define HCSPLT_XACTPOS HCSPLT_XACTPOS_Msk // XACTPOS +#define HCSPLT_XACTPOS_0 (0x1UL << HCSPLT_XACTPOS_Pos) // 0x00004000 +#define HCSPLT_XACTPOS_1 (0x2UL << HCSPLT_XACTPOS_Pos) // 0x00008000 #define HCSPLT_COMPLSPLT_Pos (16U) -#define HCSPLT_COMPLSPLT_Msk (0x1UL << HCSPLT_COMPLSPLT_Pos) // 0x00010000 */ -#define HCSPLT_COMPLSPLT HCSPLT_COMPLSPLT_Msk // Do complete split */ +#define HCSPLT_COMPLSPLT_Msk (0x1UL << HCSPLT_COMPLSPLT_Pos) // 0x00010000 +#define HCSPLT_COMPLSPLT HCSPLT_COMPLSPLT_Msk // Do complete split #define HCSPLT_SPLITEN_Pos (31U) -#define HCSPLT_SPLITEN_Msk (0x1UL << HCSPLT_SPLITEN_Pos) // 0x80000000 */ -#define HCSPLT_SPLITEN HCSPLT_SPLITEN_Msk // Split enable */ +#define HCSPLT_SPLITEN_Msk (0x1UL << HCSPLT_SPLITEN_Pos) // 0x80000000 +#define HCSPLT_SPLITEN HCSPLT_SPLITEN_Msk // Split enable /******************** Bit definition for HCINT register ********************/ #define HCINT_XFRC_Pos (0U) -#define HCINT_XFRC_Msk (0x1UL << HCINT_XFRC_Pos) // 0x00000001 */ -#define HCINT_XFRC HCINT_XFRC_Msk // Transfer completed */ +#define HCINT_XFRC_Msk (0x1UL << HCINT_XFRC_Pos) // 0x00000001 +#define HCINT_XFRC HCINT_XFRC_Msk // Transfer completed #define HCINT_CHH_Pos (1U) -#define HCINT_CHH_Msk (0x1UL << HCINT_CHH_Pos) // 0x00000002 */ -#define HCINT_CHH HCINT_CHH_Msk // Channel halted */ +#define HCINT_CHH_Msk (0x1UL << HCINT_CHH_Pos) // 0x00000002 +#define HCINT_CHH HCINT_CHH_Msk // Channel halted #define HCINT_AHBERR_Pos (2U) -#define HCINT_AHBERR_Msk (0x1UL << HCINT_AHBERR_Pos) // 0x00000004 */ -#define HCINT_AHBERR HCINT_AHBERR_Msk // AHB error */ +#define HCINT_AHBERR_Msk (0x1UL << HCINT_AHBERR_Pos) // 0x00000004 +#define HCINT_AHBERR HCINT_AHBERR_Msk // AHB error #define HCINT_STALL_Pos (3U) -#define HCINT_STALL_Msk (0x1UL << HCINT_STALL_Pos) // 0x00000008 */ -#define HCINT_STALL HCINT_STALL_Msk // STALL response received interrupt */ +#define HCINT_STALL_Msk (0x1UL << HCINT_STALL_Pos) // 0x00000008 +#define HCINT_STALL HCINT_STALL_Msk // STALL response received interrupt #define HCINT_NAK_Pos (4U) -#define HCINT_NAK_Msk (0x1UL << HCINT_NAK_Pos) // 0x00000010 */ -#define HCINT_NAK HCINT_NAK_Msk // NAK response received interrupt */ +#define HCINT_NAK_Msk (0x1UL << HCINT_NAK_Pos) // 0x00000010 +#define HCINT_NAK HCINT_NAK_Msk // NAK response received interrupt #define HCINT_ACK_Pos (5U) -#define HCINT_ACK_Msk (0x1UL << HCINT_ACK_Pos) // 0x00000020 */ -#define HCINT_ACK HCINT_ACK_Msk // ACK response received/transmitted interrupt */ +#define HCINT_ACK_Msk (0x1UL << HCINT_ACK_Pos) // 0x00000020 +#define HCINT_ACK HCINT_ACK_Msk // ACK response received/transmitted interrupt #define HCINT_NYET_Pos (6U) -#define HCINT_NYET_Msk (0x1UL << HCINT_NYET_Pos) // 0x00000040 */ -#define HCINT_NYET HCINT_NYET_Msk // Response received interrupt */ +#define HCINT_NYET_Msk (0x1UL << HCINT_NYET_Pos) // 0x00000040 +#define HCINT_NYET HCINT_NYET_Msk // Response received interrupt #define HCINT_TXERR_Pos (7U) -#define HCINT_TXERR_Msk (0x1UL << HCINT_TXERR_Pos) // 0x00000080 */ -#define HCINT_TXERR HCINT_TXERR_Msk // Transaction error */ +#define HCINT_TXERR_Msk (0x1UL << HCINT_TXERR_Pos) // 0x00000080 +#define HCINT_TXERR HCINT_TXERR_Msk // Transaction error #define HCINT_BBERR_Pos (8U) -#define HCINT_BBERR_Msk (0x1UL << HCINT_BBERR_Pos) // 0x00000100 */ -#define HCINT_BBERR HCINT_BBERR_Msk // Babble error */ +#define HCINT_BBERR_Msk (0x1UL << HCINT_BBERR_Pos) // 0x00000100 +#define HCINT_BBERR HCINT_BBERR_Msk // Babble error #define HCINT_FRMOR_Pos (9U) -#define HCINT_FRMOR_Msk (0x1UL << HCINT_FRMOR_Pos) // 0x00000200 */ -#define HCINT_FRMOR HCINT_FRMOR_Msk // Frame overrun */ +#define HCINT_FRMOR_Msk (0x1UL << HCINT_FRMOR_Pos) // 0x00000200 +#define HCINT_FRMOR HCINT_FRMOR_Msk // Frame overrun #define HCINT_DTERR_Pos (10U) -#define HCINT_DTERR_Msk (0x1UL << HCINT_DTERR_Pos) // 0x00000400 */ -#define HCINT_DTERR HCINT_DTERR_Msk // Data toggle error */ +#define HCINT_DTERR_Msk (0x1UL << HCINT_DTERR_Pos) // 0x00000400 +#define HCINT_DTERR HCINT_DTERR_Msk // Data toggle error /******************** Bit definition for DIEPINT register ********************/ #define DIEPINT_XFRC_Pos (0U) -#define DIEPINT_XFRC_Msk (0x1UL << DIEPINT_XFRC_Pos) // 0x00000001 */ -#define DIEPINT_XFRC DIEPINT_XFRC_Msk // Transfer completed interrupt */ +#define DIEPINT_XFRC_Msk (0x1UL << DIEPINT_XFRC_Pos) // 0x00000001 +#define DIEPINT_XFRC DIEPINT_XFRC_Msk // Transfer completed interrupt #define DIEPINT_EPDISD_Pos (1U) -#define DIEPINT_EPDISD_Msk (0x1UL << DIEPINT_EPDISD_Pos) // 0x00000002 */ -#define DIEPINT_EPDISD DIEPINT_EPDISD_Msk // Endpoint disabled interrupt */ +#define DIEPINT_EPDISD_Msk (0x1UL << DIEPINT_EPDISD_Pos) // 0x00000002 +#define DIEPINT_EPDISD DIEPINT_EPDISD_Msk // Endpoint disabled interrupt #define DIEPINT_AHBERR_Pos (2U) -#define DIEPINT_AHBERR_Msk (0x1UL << DIEPINT_AHBERR_Pos) // 0x00000004 */ -#define DIEPINT_AHBERR DIEPINT_AHBERR_Msk // AHB Error (AHBErr) during an IN transaction */ +#define DIEPINT_AHBERR_Msk (0x1UL << DIEPINT_AHBERR_Pos) // 0x00000004 +#define DIEPINT_AHBERR DIEPINT_AHBERR_Msk // AHB Error (AHBErr) during an IN transaction #define DIEPINT_TOC_Pos (3U) -#define DIEPINT_TOC_Msk (0x1UL << DIEPINT_TOC_Pos) // 0x00000008 */ -#define DIEPINT_TOC DIEPINT_TOC_Msk // Timeout condition */ +#define DIEPINT_TOC_Msk (0x1UL << DIEPINT_TOC_Pos) // 0x00000008 +#define DIEPINT_TOC DIEPINT_TOC_Msk // Timeout condition #define DIEPINT_ITTXFE_Pos (4U) -#define DIEPINT_ITTXFE_Msk (0x1UL << DIEPINT_ITTXFE_Pos) // 0x00000010 */ -#define DIEPINT_ITTXFE DIEPINT_ITTXFE_Msk // IN token received when TxFIFO is empty */ +#define DIEPINT_ITTXFE_Msk (0x1UL << DIEPINT_ITTXFE_Pos) // 0x00000010 +#define DIEPINT_ITTXFE DIEPINT_ITTXFE_Msk // IN token received when TxFIFO is empty #define DIEPINT_INEPNM_Pos (5U) -#define DIEPINT_INEPNM_Msk (0x1UL << DIEPINT_INEPNM_Pos) // 0x00000020 */ -#define DIEPINT_INEPNM DIEPINT_INEPNM_Msk // IN token received with EP mismatch */ +#define DIEPINT_INEPNM_Msk (0x1UL << DIEPINT_INEPNM_Pos) // 0x00000020 +#define DIEPINT_INEPNM DIEPINT_INEPNM_Msk // IN token received with EP mismatch #define DIEPINT_INEPNE_Pos (6U) -#define DIEPINT_INEPNE_Msk (0x1UL << DIEPINT_INEPNE_Pos) // 0x00000040 */ -#define DIEPINT_INEPNE DIEPINT_INEPNE_Msk // IN endpoint NAK effective */ +#define DIEPINT_INEPNE_Msk (0x1UL << DIEPINT_INEPNE_Pos) // 0x00000040 +#define DIEPINT_INEPNE DIEPINT_INEPNE_Msk // IN endpoint NAK effective #define DIEPINT_TXFE_Pos (7U) -#define DIEPINT_TXFE_Msk (0x1UL << DIEPINT_TXFE_Pos) // 0x00000080 */ -#define DIEPINT_TXFE DIEPINT_TXFE_Msk // Transmit FIFO empty */ +#define DIEPINT_TXFE_Msk (0x1UL << DIEPINT_TXFE_Pos) // 0x00000080 +#define DIEPINT_TXFE DIEPINT_TXFE_Msk // Transmit FIFO empty #define DIEPINT_TXFIFOUDRN_Pos (8U) -#define DIEPINT_TXFIFOUDRN_Msk (0x1UL << DIEPINT_TXFIFOUDRN_Pos) // 0x00000100 */ -#define DIEPINT_TXFIFOUDRN DIEPINT_TXFIFOUDRN_Msk // Transmit Fifo Underrun */ +#define DIEPINT_TXFIFOUDRN_Msk (0x1UL << DIEPINT_TXFIFOUDRN_Pos) // 0x00000100 +#define DIEPINT_TXFIFOUDRN DIEPINT_TXFIFOUDRN_Msk // Transmit Fifo Underrun #define DIEPINT_BNA_Pos (9U) -#define DIEPINT_BNA_Msk (0x1UL << DIEPINT_BNA_Pos) // 0x00000200 */ -#define DIEPINT_BNA DIEPINT_BNA_Msk // Buffer not available interrupt */ +#define DIEPINT_BNA_Msk (0x1UL << DIEPINT_BNA_Pos) // 0x00000200 +#define DIEPINT_BNA DIEPINT_BNA_Msk // Buffer not available interrupt #define DIEPINT_PKTDRPSTS_Pos (11U) -#define DIEPINT_PKTDRPSTS_Msk (0x1UL << DIEPINT_PKTDRPSTS_Pos) // 0x00000800 */ -#define DIEPINT_PKTDRPSTS DIEPINT_PKTDRPSTS_Msk // Packet dropped status */ +#define DIEPINT_PKTDRPSTS_Msk (0x1UL << DIEPINT_PKTDRPSTS_Pos) // 0x00000800 +#define DIEPINT_PKTDRPSTS DIEPINT_PKTDRPSTS_Msk // Packet dropped status #define DIEPINT_BERR_Pos (12U) -#define DIEPINT_BERR_Msk (0x1UL << DIEPINT_BERR_Pos) // 0x00001000 */ -#define DIEPINT_BERR DIEPINT_BERR_Msk // Babble error interrupt */ +#define DIEPINT_BERR_Msk (0x1UL << DIEPINT_BERR_Pos) // 0x00001000 +#define DIEPINT_BERR DIEPINT_BERR_Msk // Babble error interrupt #define DIEPINT_NAK_Pos (13U) -#define DIEPINT_NAK_Msk (0x1UL << DIEPINT_NAK_Pos) // 0x00002000 */ -#define DIEPINT_NAK DIEPINT_NAK_Msk // NAK interrupt */ +#define DIEPINT_NAK_Msk (0x1UL << DIEPINT_NAK_Pos) // 0x00002000 +#define DIEPINT_NAK DIEPINT_NAK_Msk // NAK interrupt /******************** Bit definition for HCINTMSK register ********************/ #define HCINTMSK_XFRCM_Pos (0U) -#define HCINTMSK_XFRCM_Msk (0x1UL << HCINTMSK_XFRCM_Pos) // 0x00000001 */ -#define HCINTMSK_XFRCM HCINTMSK_XFRCM_Msk // Transfer completed mask */ +#define HCINTMSK_XFRCM_Msk (0x1UL << HCINTMSK_XFRCM_Pos) // 0x00000001 +#define HCINTMSK_XFRCM HCINTMSK_XFRCM_Msk // Transfer completed mask #define HCINTMSK_CHHM_Pos (1U) -#define HCINTMSK_CHHM_Msk (0x1UL << HCINTMSK_CHHM_Pos) // 0x00000002 */ -#define HCINTMSK_CHHM HCINTMSK_CHHM_Msk // Channel halted mask */ +#define HCINTMSK_CHHM_Msk (0x1UL << HCINTMSK_CHHM_Pos) // 0x00000002 +#define HCINTMSK_CHHM HCINTMSK_CHHM_Msk // Channel halted mask #define HCINTMSK_AHBERR_Pos (2U) -#define HCINTMSK_AHBERR_Msk (0x1UL << HCINTMSK_AHBERR_Pos) // 0x00000004 */ -#define HCINTMSK_AHBERR HCINTMSK_AHBERR_Msk // AHB error */ +#define HCINTMSK_AHBERR_Msk (0x1UL << HCINTMSK_AHBERR_Pos) // 0x00000004 +#define HCINTMSK_AHBERR HCINTMSK_AHBERR_Msk // AHB error #define HCINTMSK_STALLM_Pos (3U) -#define HCINTMSK_STALLM_Msk (0x1UL << HCINTMSK_STALLM_Pos) // 0x00000008 */ -#define HCINTMSK_STALLM HCINTMSK_STALLM_Msk // STALL response received interrupt mask */ +#define HCINTMSK_STALLM_Msk (0x1UL << HCINTMSK_STALLM_Pos) // 0x00000008 +#define HCINTMSK_STALLM HCINTMSK_STALLM_Msk // STALL response received interrupt mask #define HCINTMSK_NAKM_Pos (4U) -#define HCINTMSK_NAKM_Msk (0x1UL << HCINTMSK_NAKM_Pos) // 0x00000010 */ -#define HCINTMSK_NAKM HCINTMSK_NAKM_Msk // NAK response received interrupt mask */ +#define HCINTMSK_NAKM_Msk (0x1UL << HCINTMSK_NAKM_Pos) // 0x00000010 +#define HCINTMSK_NAKM HCINTMSK_NAKM_Msk // NAK response received interrupt mask #define HCINTMSK_ACKM_Pos (5U) -#define HCINTMSK_ACKM_Msk (0x1UL << HCINTMSK_ACKM_Pos) // 0x00000020 */ -#define HCINTMSK_ACKM HCINTMSK_ACKM_Msk // ACK response received/transmitted interrupt mask */ +#define HCINTMSK_ACKM_Msk (0x1UL << HCINTMSK_ACKM_Pos) // 0x00000020 +#define HCINTMSK_ACKM HCINTMSK_ACKM_Msk // ACK response received/transmitted interrupt mask #define HCINTMSK_NYET_Pos (6U) -#define HCINTMSK_NYET_Msk (0x1UL << HCINTMSK_NYET_Pos) // 0x00000040 */ -#define HCINTMSK_NYET HCINTMSK_NYET_Msk // response received interrupt mask */ +#define HCINTMSK_NYET_Msk (0x1UL << HCINTMSK_NYET_Pos) // 0x00000040 +#define HCINTMSK_NYET HCINTMSK_NYET_Msk // response received interrupt mask #define HCINTMSK_TXERRM_Pos (7U) -#define HCINTMSK_TXERRM_Msk (0x1UL << HCINTMSK_TXERRM_Pos) // 0x00000080 */ -#define HCINTMSK_TXERRM HCINTMSK_TXERRM_Msk // Transaction error mask */ +#define HCINTMSK_TXERRM_Msk (0x1UL << HCINTMSK_TXERRM_Pos) // 0x00000080 +#define HCINTMSK_TXERRM HCINTMSK_TXERRM_Msk // Transaction error mask #define HCINTMSK_BBERRM_Pos (8U) -#define HCINTMSK_BBERRM_Msk (0x1UL << HCINTMSK_BBERRM_Pos) // 0x00000100 */ -#define HCINTMSK_BBERRM HCINTMSK_BBERRM_Msk // Babble error mask */ +#define HCINTMSK_BBERRM_Msk (0x1UL << HCINTMSK_BBERRM_Pos) // 0x00000100 +#define HCINTMSK_BBERRM HCINTMSK_BBERRM_Msk // Babble error mask #define HCINTMSK_FRMORM_Pos (9U) -#define HCINTMSK_FRMORM_Msk (0x1UL << HCINTMSK_FRMORM_Pos) // 0x00000200 */ -#define HCINTMSK_FRMORM HCINTMSK_FRMORM_Msk // Frame overrun mask */ +#define HCINTMSK_FRMORM_Msk (0x1UL << HCINTMSK_FRMORM_Pos) // 0x00000200 +#define HCINTMSK_FRMORM HCINTMSK_FRMORM_Msk // Frame overrun mask #define HCINTMSK_DTERRM_Pos (10U) -#define HCINTMSK_DTERRM_Msk (0x1UL << HCINTMSK_DTERRM_Pos) // 0x00000400 */ -#define HCINTMSK_DTERRM HCINTMSK_DTERRM_Msk // Data toggle error mask */ +#define HCINTMSK_DTERRM_Msk (0x1UL << HCINTMSK_DTERRM_Pos) // 0x00000400 +#define HCINTMSK_DTERRM HCINTMSK_DTERRM_Msk // Data toggle error mask /******************** Bit definition for DIEPTSIZ register ********************/ #define DIEPTSIZ_XFRSIZ_Pos (0U) -#define DIEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << DIEPTSIZ_XFRSIZ_Pos) // 0x0007FFFF */ -#define DIEPTSIZ_XFRSIZ DIEPTSIZ_XFRSIZ_Msk // Transfer size */ +#define DIEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << DIEPTSIZ_XFRSIZ_Pos) // 0x0007FFFF +#define DIEPTSIZ_XFRSIZ DIEPTSIZ_XFRSIZ_Msk // Transfer size #define DIEPTSIZ_PKTCNT_Pos (19U) -#define DIEPTSIZ_PKTCNT_Msk (0x3FFUL << DIEPTSIZ_PKTCNT_Pos) // 0x1FF80000 */ -#define DIEPTSIZ_PKTCNT DIEPTSIZ_PKTCNT_Msk // Packet count */ +#define DIEPTSIZ_PKTCNT_Msk (0x3FFUL << DIEPTSIZ_PKTCNT_Pos) // 0x1FF80000 +#define DIEPTSIZ_PKTCNT DIEPTSIZ_PKTCNT_Msk // Packet count #define DIEPTSIZ_MULCNT_Pos (29U) -#define DIEPTSIZ_MULCNT_Msk (0x3UL << DIEPTSIZ_MULCNT_Pos) // 0x60000000 */ -#define DIEPTSIZ_MULCNT DIEPTSIZ_MULCNT_Msk // Packet count */ +#define DIEPTSIZ_MULCNT_Msk (0x3UL << DIEPTSIZ_MULCNT_Pos) // 0x60000000 +#define DIEPTSIZ_MULCNT DIEPTSIZ_MULCNT_Msk // Packet count /******************** Bit definition for HCTSIZ register ********************/ #define HCTSIZ_XFRSIZ_Pos (0U) -#define HCTSIZ_XFRSIZ_Msk (0x7FFFFUL << HCTSIZ_XFRSIZ_Pos) // 0x0007FFFF */ -#define HCTSIZ_XFRSIZ HCTSIZ_XFRSIZ_Msk // Transfer size */ +#define HCTSIZ_XFRSIZ_Msk (0x7FFFFUL << HCTSIZ_XFRSIZ_Pos) // 0x0007FFFF +#define HCTSIZ_XFRSIZ HCTSIZ_XFRSIZ_Msk // Transfer size #define HCTSIZ_PKTCNT_Pos (19U) -#define HCTSIZ_PKTCNT_Msk (0x3FFUL << HCTSIZ_PKTCNT_Pos) // 0x1FF80000 */ -#define HCTSIZ_PKTCNT HCTSIZ_PKTCNT_Msk // Packet count */ +#define HCTSIZ_PKTCNT_Msk (0x3FFUL << HCTSIZ_PKTCNT_Pos) // 0x1FF80000 +#define HCTSIZ_PKTCNT HCTSIZ_PKTCNT_Msk // Packet count #define HCTSIZ_DOPING_Pos (31U) -#define HCTSIZ_DOPING_Msk (0x1UL << HCTSIZ_DOPING_Pos) // 0x80000000 */ -#define HCTSIZ_DOPING HCTSIZ_DOPING_Msk // Do PING */ +#define HCTSIZ_DOPING_Msk (0x1UL << HCTSIZ_DOPING_Pos) // 0x80000000 +#define HCTSIZ_DOPING HCTSIZ_DOPING_Msk // Do PING #define HCTSIZ_DPID_Pos (29U) -#define HCTSIZ_DPID_Msk (0x3UL << HCTSIZ_DPID_Pos) // 0x60000000 */ -#define HCTSIZ_DPID HCTSIZ_DPID_Msk // Data PID */ -#define HCTSIZ_DPID_0 (0x1UL << HCTSIZ_DPID_Pos) // 0x20000000 */ -#define HCTSIZ_DPID_1 (0x2UL << HCTSIZ_DPID_Pos) // 0x40000000 */ +#define HCTSIZ_DPID_Msk (0x3UL << HCTSIZ_DPID_Pos) // 0x60000000 +#define HCTSIZ_DPID HCTSIZ_DPID_Msk // Data PID +#define HCTSIZ_DPID_0 (0x1UL << HCTSIZ_DPID_Pos) // 0x20000000 +#define HCTSIZ_DPID_1 (0x2UL << HCTSIZ_DPID_Pos) // 0x40000000 /******************** Bit definition for DIEPDMA register ********************/ #define DIEPDMA_DMAADDR_Pos (0U) -#define DIEPDMA_DMAADDR_Msk (0xFFFFFFFFUL << DIEPDMA_DMAADDR_Pos) // 0xFFFFFFFF */ -#define DIEPDMA_DMAADDR DIEPDMA_DMAADDR_Msk // DMA address */ +#define DIEPDMA_DMAADDR_Msk (0xFFFFFFFFUL << DIEPDMA_DMAADDR_Pos) // 0xFFFFFFFF +#define DIEPDMA_DMAADDR DIEPDMA_DMAADDR_Msk // DMA address /******************** Bit definition for HCDMA register ********************/ #define HCDMA_DMAADDR_Pos (0U) -#define HCDMA_DMAADDR_Msk (0xFFFFFFFFUL << HCDMA_DMAADDR_Pos) // 0xFFFFFFFF */ -#define HCDMA_DMAADDR HCDMA_DMAADDR_Msk // DMA address */ +#define HCDMA_DMAADDR_Msk (0xFFFFFFFFUL << HCDMA_DMAADDR_Pos) // 0xFFFFFFFF +#define HCDMA_DMAADDR HCDMA_DMAADDR_Msk // DMA address /******************** Bit definition for DTXFSTS register ********************/ #define DTXFSTS_INEPTFSAV_Pos (0U) -#define DTXFSTS_INEPTFSAV_Msk (0xFFFFUL << DTXFSTS_INEPTFSAV_Pos) // 0x0000FFFF */ -#define DTXFSTS_INEPTFSAV DTXFSTS_INEPTFSAV_Msk // IN endpoint TxFIFO space available */ +#define DTXFSTS_INEPTFSAV_Msk (0xFFFFUL << DTXFSTS_INEPTFSAV_Pos) // 0x0000FFFF +#define DTXFSTS_INEPTFSAV DTXFSTS_INEPTFSAV_Msk // IN endpoint TxFIFO space available /******************** Bit definition for DIEPTXF register ********************/ #define DIEPTXF_INEPTXSA_Pos (0U) -#define DIEPTXF_INEPTXSA_Msk (0xFFFFUL << DIEPTXF_INEPTXSA_Pos) // 0x0000FFFF */ -#define DIEPTXF_INEPTXSA DIEPTXF_INEPTXSA_Msk // IN endpoint FIFOx transmit RAM start address */ +#define DIEPTXF_INEPTXSA_Msk (0xFFFFUL << DIEPTXF_INEPTXSA_Pos) // 0x0000FFFF +#define DIEPTXF_INEPTXSA DIEPTXF_INEPTXSA_Msk // IN endpoint FIFOx transmit RAM start address #define DIEPTXF_INEPTXFD_Pos (16U) -#define DIEPTXF_INEPTXFD_Msk (0xFFFFUL << DIEPTXF_INEPTXFD_Pos) // 0xFFFF0000 */ -#define DIEPTXF_INEPTXFD DIEPTXF_INEPTXFD_Msk // IN endpoint TxFIFO depth */ +#define DIEPTXF_INEPTXFD_Msk (0xFFFFUL << DIEPTXF_INEPTXFD_Pos) // 0xFFFF0000 +#define DIEPTXF_INEPTXFD DIEPTXF_INEPTXFD_Msk // IN endpoint TxFIFO depth /******************** Bit definition for DOEPCTL register ********************/ #define DOEPCTL_MPSIZ_Pos (0U) -#define DOEPCTL_MPSIZ_Msk (0x7FFUL << DOEPCTL_MPSIZ_Pos) // 0x000007FF */ -#define DOEPCTL_MPSIZ DOEPCTL_MPSIZ_Msk // Maximum packet size */ //Bit 1 */ +#define DOEPCTL_MPSIZ_Msk (0x7FFUL << DOEPCTL_MPSIZ_Pos) // 0x000007FF +#define DOEPCTL_MPSIZ DOEPCTL_MPSIZ_Msk // Maximum packet size //Bit 1 #define DOEPCTL_USBAEP_Pos (15U) -#define DOEPCTL_USBAEP_Msk (0x1UL << DOEPCTL_USBAEP_Pos) // 0x00008000 */ -#define DOEPCTL_USBAEP DOEPCTL_USBAEP_Msk // USB active endpoint */ +#define DOEPCTL_USBAEP_Msk (0x1UL << DOEPCTL_USBAEP_Pos) // 0x00008000 +#define DOEPCTL_USBAEP DOEPCTL_USBAEP_Msk // USB active endpoint #define DOEPCTL_NAKSTS_Pos (17U) -#define DOEPCTL_NAKSTS_Msk (0x1UL << DOEPCTL_NAKSTS_Pos) // 0x00020000 */ -#define DOEPCTL_NAKSTS DOEPCTL_NAKSTS_Msk // NAK status */ +#define DOEPCTL_NAKSTS_Msk (0x1UL << DOEPCTL_NAKSTS_Pos) // 0x00020000 +#define DOEPCTL_NAKSTS DOEPCTL_NAKSTS_Msk // NAK status #define DOEPCTL_SD0PID_SEVNFRM_Pos (28U) -#define DOEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << DOEPCTL_SD0PID_SEVNFRM_Pos) // 0x10000000 */ -#define DOEPCTL_SD0PID_SEVNFRM DOEPCTL_SD0PID_SEVNFRM_Msk // Set DATA0 PID */ +#define DOEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << DOEPCTL_SD0PID_SEVNFRM_Pos) // 0x10000000 +#define DOEPCTL_SD0PID_SEVNFRM DOEPCTL_SD0PID_SEVNFRM_Msk // Set DATA0 PID #define DOEPCTL_SODDFRM_Pos (29U) -#define DOEPCTL_SODDFRM_Msk (0x1UL << DOEPCTL_SODDFRM_Pos) // 0x20000000 */ -#define DOEPCTL_SODDFRM DOEPCTL_SODDFRM_Msk // Set odd frame */ +#define DOEPCTL_SODDFRM_Msk (0x1UL << DOEPCTL_SODDFRM_Pos) // 0x20000000 +#define DOEPCTL_SODDFRM DOEPCTL_SODDFRM_Msk // Set odd frame #define DOEPCTL_EPTYP_Pos (18U) -#define DOEPCTL_EPTYP_Msk (0x3UL << DOEPCTL_EPTYP_Pos) // 0x000C0000 */ -#define DOEPCTL_EPTYP DOEPCTL_EPTYP_Msk // Endpoint type */ -#define DOEPCTL_EPTYP_0 (0x1UL << DOEPCTL_EPTYP_Pos) // 0x00040000 */ -#define DOEPCTL_EPTYP_1 (0x2UL << DOEPCTL_EPTYP_Pos) // 0x00080000 */ +#define DOEPCTL_EPTYP_Msk (0x3UL << DOEPCTL_EPTYP_Pos) // 0x000C0000 +#define DOEPCTL_EPTYP DOEPCTL_EPTYP_Msk // Endpoint type +#define DOEPCTL_EPTYP_0 (0x1UL << DOEPCTL_EPTYP_Pos) // 0x00040000 +#define DOEPCTL_EPTYP_1 (0x2UL << DOEPCTL_EPTYP_Pos) // 0x00080000 #define DOEPCTL_SNPM_Pos (20U) -#define DOEPCTL_SNPM_Msk (0x1UL << DOEPCTL_SNPM_Pos) // 0x00100000 */ -#define DOEPCTL_SNPM DOEPCTL_SNPM_Msk // Snoop mode */ +#define DOEPCTL_SNPM_Msk (0x1UL << DOEPCTL_SNPM_Pos) // 0x00100000 +#define DOEPCTL_SNPM DOEPCTL_SNPM_Msk // Snoop mode #define DOEPCTL_STALL_Pos (21U) -#define DOEPCTL_STALL_Msk (0x1UL << DOEPCTL_STALL_Pos) // 0x00200000 */ -#define DOEPCTL_STALL DOEPCTL_STALL_Msk // STALL handshake */ +#define DOEPCTL_STALL_Msk (0x1UL << DOEPCTL_STALL_Pos) // 0x00200000 +#define DOEPCTL_STALL DOEPCTL_STALL_Msk // STALL handshake #define DOEPCTL_CNAK_Pos (26U) -#define DOEPCTL_CNAK_Msk (0x1UL << DOEPCTL_CNAK_Pos) // 0x04000000 */ -#define DOEPCTL_CNAK DOEPCTL_CNAK_Msk // Clear NAK */ +#define DOEPCTL_CNAK_Msk (0x1UL << DOEPCTL_CNAK_Pos) // 0x04000000 +#define DOEPCTL_CNAK DOEPCTL_CNAK_Msk // Clear NAK #define DOEPCTL_SNAK_Pos (27U) -#define DOEPCTL_SNAK_Msk (0x1UL << DOEPCTL_SNAK_Pos) // 0x08000000 */ -#define DOEPCTL_SNAK DOEPCTL_SNAK_Msk // Set NAK */ +#define DOEPCTL_SNAK_Msk (0x1UL << DOEPCTL_SNAK_Pos) // 0x08000000 +#define DOEPCTL_SNAK DOEPCTL_SNAK_Msk // Set NAK #define DOEPCTL_EPDIS_Pos (30U) -#define DOEPCTL_EPDIS_Msk (0x1UL << DOEPCTL_EPDIS_Pos) // 0x40000000 */ -#define DOEPCTL_EPDIS DOEPCTL_EPDIS_Msk // Endpoint disable */ +#define DOEPCTL_EPDIS_Msk (0x1UL << DOEPCTL_EPDIS_Pos) // 0x40000000 +#define DOEPCTL_EPDIS DOEPCTL_EPDIS_Msk // Endpoint disable #define DOEPCTL_EPENA_Pos (31U) -#define DOEPCTL_EPENA_Msk (0x1UL << DOEPCTL_EPENA_Pos) // 0x80000000 */ -#define DOEPCTL_EPENA DOEPCTL_EPENA_Msk // Endpoint enable */ +#define DOEPCTL_EPENA_Msk (0x1UL << DOEPCTL_EPENA_Pos) // 0x80000000 +#define DOEPCTL_EPENA DOEPCTL_EPENA_Msk // Endpoint enable /******************** Bit definition for DOEPINT register ********************/ #define DOEPINT_XFRC_Pos (0U) -#define DOEPINT_XFRC_Msk (0x1UL << DOEPINT_XFRC_Pos) // 0x00000001 */ -#define DOEPINT_XFRC DOEPINT_XFRC_Msk // Transfer completed interrupt */ +#define DOEPINT_XFRC_Msk (0x1UL << DOEPINT_XFRC_Pos) // 0x00000001 +#define DOEPINT_XFRC DOEPINT_XFRC_Msk // Transfer completed interrupt #define DOEPINT_EPDISD_Pos (1U) -#define DOEPINT_EPDISD_Msk (0x1UL << DOEPINT_EPDISD_Pos) // 0x00000002 */ -#define DOEPINT_EPDISD DOEPINT_EPDISD_Msk // Endpoint disabled interrupt */ +#define DOEPINT_EPDISD_Msk (0x1UL << DOEPINT_EPDISD_Pos) // 0x00000002 +#define DOEPINT_EPDISD DOEPINT_EPDISD_Msk // Endpoint disabled interrupt #define DOEPINT_AHBERR_Pos (2U) -#define DOEPINT_AHBERR_Msk (0x1UL << DOEPINT_AHBERR_Pos) // 0x00000004 */ -#define DOEPINT_AHBERR DOEPINT_AHBERR_Msk // AHB Error (AHBErr) during an OUT transaction */ +#define DOEPINT_AHBERR_Msk (0x1UL << DOEPINT_AHBERR_Pos) // 0x00000004 +#define DOEPINT_AHBERR DOEPINT_AHBERR_Msk // AHB Error (AHBErr) during an OUT transaction #define DOEPINT_STUP_Pos (3U) -#define DOEPINT_STUP_Msk (0x1UL << DOEPINT_STUP_Pos) // 0x00000008 */ -#define DOEPINT_STUP DOEPINT_STUP_Msk // SETUP phase done */ +#define DOEPINT_STUP_Msk (0x1UL << DOEPINT_STUP_Pos) // 0x00000008 +#define DOEPINT_STUP DOEPINT_STUP_Msk // SETUP phase done #define DOEPINT_OTEPDIS_Pos (4U) -#define DOEPINT_OTEPDIS_Msk (0x1UL << DOEPINT_OTEPDIS_Pos) // 0x00000010 */ -#define DOEPINT_OTEPDIS DOEPINT_OTEPDIS_Msk // OUT token received when endpoint disabled */ +#define DOEPINT_OTEPDIS_Msk (0x1UL << DOEPINT_OTEPDIS_Pos) // 0x00000010 +#define DOEPINT_OTEPDIS DOEPINT_OTEPDIS_Msk // OUT token received when endpoint disabled #define DOEPINT_OTEPSPR_Pos (5U) -#define DOEPINT_OTEPSPR_Msk (0x1UL << DOEPINT_OTEPSPR_Pos) // 0x00000020 */ -#define DOEPINT_OTEPSPR DOEPINT_OTEPSPR_Msk // Status Phase Received For Control Write */ +#define DOEPINT_OTEPSPR_Msk (0x1UL << DOEPINT_OTEPSPR_Pos) // 0x00000020 +#define DOEPINT_OTEPSPR DOEPINT_OTEPSPR_Msk // Status Phase Received For Control Write #define DOEPINT_B2BSTUP_Pos (6U) -#define DOEPINT_B2BSTUP_Msk (0x1UL << DOEPINT_B2BSTUP_Pos) // 0x00000040 */ -#define DOEPINT_B2BSTUP DOEPINT_B2BSTUP_Msk // Back-to-back SETUP packets received */ +#define DOEPINT_B2BSTUP_Msk (0x1UL << DOEPINT_B2BSTUP_Pos) // 0x00000040 +#define DOEPINT_B2BSTUP DOEPINT_B2BSTUP_Msk // Back-to-back SETUP packets received #define DOEPINT_OUTPKTERR_Pos (8U) -#define DOEPINT_OUTPKTERR_Msk (0x1UL << DOEPINT_OUTPKTERR_Pos) // 0x00000100 */ -#define DOEPINT_OUTPKTERR DOEPINT_OUTPKTERR_Msk // OUT packet error */ +#define DOEPINT_OUTPKTERR_Msk (0x1UL << DOEPINT_OUTPKTERR_Pos) // 0x00000100 +#define DOEPINT_OUTPKTERR DOEPINT_OUTPKTERR_Msk // OUT packet error #define DOEPINT_NAK_Pos (13U) -#define DOEPINT_NAK_Msk (0x1UL << DOEPINT_NAK_Pos) // 0x00002000 */ -#define DOEPINT_NAK DOEPINT_NAK_Msk // NAK Packet is transmitted by the device */ +#define DOEPINT_NAK_Msk (0x1UL << DOEPINT_NAK_Pos) // 0x00002000 +#define DOEPINT_NAK DOEPINT_NAK_Msk // NAK Packet is transmitted by the device #define DOEPINT_NYET_Pos (14U) -#define DOEPINT_NYET_Msk (0x1UL << DOEPINT_NYET_Pos) // 0x00004000 */ -#define DOEPINT_NYET DOEPINT_NYET_Msk // NYET interrupt */ +#define DOEPINT_NYET_Msk (0x1UL << DOEPINT_NYET_Pos) // 0x00004000 +#define DOEPINT_NYET DOEPINT_NYET_Msk // NYET interrupt #define DOEPINT_STPKTRX_Pos (15U) -#define DOEPINT_STPKTRX_Msk (0x1UL << DOEPINT_STPKTRX_Pos) // 0x00008000 */ -#define DOEPINT_STPKTRX DOEPINT_STPKTRX_Msk // Setup Packet Received */ +#define DOEPINT_STPKTRX_Msk (0x1UL << DOEPINT_STPKTRX_Pos) // 0x00008000 +#define DOEPINT_STPKTRX DOEPINT_STPKTRX_Msk // Setup Packet Received /******************** Bit definition for DOEPTSIZ register ********************/ #define DOEPTSIZ_XFRSIZ_Pos (0U) -#define DOEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << DOEPTSIZ_XFRSIZ_Pos) // 0x0007FFFF */ -#define DOEPTSIZ_XFRSIZ DOEPTSIZ_XFRSIZ_Msk // Transfer size */ +#define DOEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << DOEPTSIZ_XFRSIZ_Pos) // 0x0007FFFF +#define DOEPTSIZ_XFRSIZ DOEPTSIZ_XFRSIZ_Msk // Transfer size #define DOEPTSIZ_PKTCNT_Pos (19U) -#define DOEPTSIZ_PKTCNT_Msk (0x3FFUL << DOEPTSIZ_PKTCNT_Pos) // 0x1FF80000 */ -#define DOEPTSIZ_PKTCNT DOEPTSIZ_PKTCNT_Msk // Packet count */ +#define DOEPTSIZ_PKTCNT_Msk (0x3FFUL << DOEPTSIZ_PKTCNT_Pos) // 0x1FF80000 +#define DOEPTSIZ_PKTCNT DOEPTSIZ_PKTCNT_Msk // Packet count #define DOEPTSIZ_STUPCNT_Pos (29U) -#define DOEPTSIZ_STUPCNT_Msk (0x3UL << DOEPTSIZ_STUPCNT_Pos) // 0x60000000 */ -#define DOEPTSIZ_STUPCNT DOEPTSIZ_STUPCNT_Msk // SETUP packet count */ -#define DOEPTSIZ_STUPCNT_0 (0x1UL << DOEPTSIZ_STUPCNT_Pos) // 0x20000000 */ -#define DOEPTSIZ_STUPCNT_1 (0x2UL << DOEPTSIZ_STUPCNT_Pos) // 0x40000000 */ +#define DOEPTSIZ_STUPCNT_Msk (0x3UL << DOEPTSIZ_STUPCNT_Pos) // 0x60000000 +#define DOEPTSIZ_STUPCNT DOEPTSIZ_STUPCNT_Msk // SETUP packet count +#define DOEPTSIZ_STUPCNT_0 (0x1UL << DOEPTSIZ_STUPCNT_Pos) // 0x20000000 +#define DOEPTSIZ_STUPCNT_1 (0x2UL << DOEPTSIZ_STUPCNT_Pos) // 0x40000000 /******************** Bit definition for PCGCTL register ********************/ #define PCGCTL_IF_DEV_MODE TU_BIT(31) From db3ff4b3527b9b81d381ecc21a74e76e81b2a8e9 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 11:26:31 +0700 Subject: [PATCH 28/82] usb on u5a5 hs work well with correct VBVALEXTOEN/VBVALOVAL set --- hw/bsp/family_support.cmake | 2 +- .../boards/stm32u5a5nucleo/board.cmake | 1 + hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 6 ++-- .../stm32u5/boards/stm32u5a5nucleo/board.mk | 1 + hw/bsp/stm32u5/family.c | 28 +++++++++---------- src/portable/synopsys/dwc2/dcd_dwc2.c | 3 +- src/portable/synopsys/dwc2/dwc2_stm32.h | 25 +++++++++-------- 7 files changed, 37 insertions(+), 29 deletions(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 9c625b58e..eec42160e 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -217,7 +217,7 @@ function(family_configure_common TARGET RTOS) if (NOT TARGET segger_rtt) add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) - target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) + #target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) endif() target_link_libraries(${TARGET} PUBLIC segger_rtt) endif () diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake index 24d4ef95a..230c3b722 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32U5A5ZJTXQ_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32U5A5xx + HSE_VALUE=16000000UL ) endfunction() diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index c4eb94dd8..1cc61d6bb 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -38,8 +38,8 @@ extern "C" #define LED_STATE_ON 1 // BUTTON -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 #define BUTTON_STATE_ACTIVE 1 // UART Enable for STLink VCOM @@ -101,6 +101,8 @@ static void SystemClock_Config(void) { HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); // USB Clock + __HAL_RCC_SYSCFG_CLK_ENABLE(); + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USBPHY; PeriphClkInit.UsbPhyClockSelection = RCC_USBPHYCLKSOURCE_HSE; diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk index 13025efa6..e759cec24 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk @@ -1,5 +1,6 @@ CFLAGS += \ -DSTM32U5A5xx \ + -DHSE_VALUE=16000000UL \ # All source paths should be relative to the top level. LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 3fbc50d93..94294b25d 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -124,7 +124,7 @@ void board_init(void) { HAL_UART_Init(&UartHandle); - /* Configure USB FS GPIOs */ + /* Configure USB GPIOs */ /* Configure DM DP Pins */ GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; @@ -153,6 +153,12 @@ void board_init(void) { GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + /* USB clock enable */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + // Enable VBUS sense (B device) via pin PA9 USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; #else @@ -164,11 +170,6 @@ void board_init(void) { USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense - /* Enable USB power on Pwrctrl CR2 register */ - HAL_PWREx_EnableVddUSB(); - - /* USB clock enable */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); #else // STM59x/Ax/Fx/Gx only have 1 USB HS port @@ -177,15 +178,7 @@ void board_init(void) { NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - /* USB clock enable */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); __HAL_RCC_USBPHYC_CLK_ENABLE(); @@ -195,6 +188,13 @@ void board_init(void) { /*Configuring the SYSCFG registers OTG_HS PHY*/ HAL_SYSCFG_EnableOTGPHY(SYSCFG_OTG_HS_PHY_ENABLE); + + // Disable VBUS sense (B device) + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; #endif // USB_OTG_FS diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 7b50a7d54..5c5450ac2 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1074,7 +1074,6 @@ void dcd_int_handler(uint8_t rhport) { if (int_status & GINTSTS_ENUMDNE) { // ENUMDNE is the end of reset where speed of the link is detected - dwc2->gintsts = GINTSTS_ENUMDNE; tusb_speed_t speed; @@ -1094,6 +1093,8 @@ void dcd_int_handler(uint8_t rhport) { break; } + // TODO must update GUSBCFG_TRDT according to link speed + dcd_event_bus_reset(rhport, speed, true); } diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 57df4e941..2070c3943 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _DWC2_STM32_H_ -#define _DWC2_STM32_H_ +#ifndef DWC2_STM32_H_ +#define DWC2_STM32_H_ #ifdef __cplusplus extern "C" { @@ -124,35 +124,36 @@ static const dwc2_controller_t _dwc2_controller[] = { // SystemCoreClock is already included by family header // extern uint32_t SystemCoreClock; -TU_ATTR_ALWAYS_INLINE -static inline void dwc2_dcd_int_enable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_enable(uint8_t rhport) { NVIC_EnableIRQ((IRQn_Type) _dwc2_controller[rhport].irqnum); } -TU_ATTR_ALWAYS_INLINE -static inline void dwc2_dcd_int_disable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_disable(uint8_t rhport) { NVIC_DisableIRQ((IRQn_Type) _dwc2_controller[rhport].irqnum); } -TU_ATTR_ALWAYS_INLINE -static inline void dwc2_remote_wakeup_delay(void) { +TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { // try to delay for 1 ms uint32_t count = SystemCoreClock / 1000; while (count--) __NOP(); } // MCU specific PHY init, called BEFORE core reset +// - dwc2 3.30a (H5) use USB_HS_PHYC +// - dwc2 4.11a (U5) use femtoPHY static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { if (hs_phy_type == HS_PHY_TYPE_NONE) { // Enable on-chip FS PHY dwc2->stm32_gccfg |= STM32_GCCFG_PWRDWN; } else { +#if CFG_TUSB_MCU != OPT_MCU_STM32U5 // Disable FS PHY, TODO on U5A5 (dwc2 4.11a) 16th bit is 'Host CDP behavior enable' dwc2->stm32_gccfg &= ~STM32_GCCFG_PWRDWN; +#endif // Enable on-chip HS PHY if (hs_phy_type == HS_PHY_TYPE_UTMI || hs_phy_type == HS_PHY_TYPE_UTMI_ULPI) { -#ifdef USB_HS_PHYC + #ifdef USB_HS_PHYC // Enable UTMI HS PHY dwc2->stm32_gccfg |= STM32_GCCFG_PHYHSEN; @@ -184,7 +185,9 @@ static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { // Enable PLL internal PHY USB_HS_PHYC->USB_HS_PHYC_PLL |= USB_HS_PHYC_PLL_PLLEN; -#endif + #else + + #endif } } } @@ -232,4 +235,4 @@ static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { } #endif -#endif /* _DWC2_STM32_H_ */ +#endif From 6ab7875aab3e677fb3bafa8595b7eb90598c2d58 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 11:39:20 +0700 Subject: [PATCH 29/82] uart working on u5a5 --- examples/device/board_test/src/main.c | 22 ++++----------- hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 28 ++++++++++++------- hw/bsp/stm32u5/family.c | 5 +--- 3 files changed, 25 insertions(+), 30 deletions(-) diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 0a134a2e6..91799eb89 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -26,39 +26,31 @@ #include #include #include - #include "bsp/board_api.h" -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF PROTOTYPES -//--------------------------------------------------------------------+ - /* Blink pattern * - 250 ms : button is not pressed * - 1000 ms : button is pressed (and hold) */ -enum { +enum { BLINK_PRESSED = 250, BLINK_UNPRESSED = 1000 }; #define HELLO_STR "Hello from TinyUSB\r\n" -int main(void) -{ +int main(void) { board_init(); board_led_write(true); uint32_t start_ms = 0; bool led_state = false; - while (1) - { + while (1) { uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED; // Blink and print every interval ms - if ( !(board_millis() - start_ms < interval_ms) ) - { + if (!(board_millis() - start_ms < interval_ms)) { board_uart_write(HELLO_STR, strlen(HELLO_STR)); start_ms = board_millis(); @@ -69,16 +61,14 @@ int main(void) // echo uint8_t ch; - if ( board_uart_read(&ch, 1) > 0 ) - { + if (board_uart_read(&ch, 1) > 0) { board_uart_write(&ch, 1); } } } #if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 -void app_main(void) -{ +void app_main(void) { main(); } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 1cc61d6bb..062fb807f 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -43,12 +43,12 @@ extern "C" #define BUTTON_STATE_ACTIVE 1 // UART Enable for STLink VCOM -#define UART_DEV LPUART1 -#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOG -#define UART_GPIO_AF GPIO_AF8_LPUART1 -#define UART_TX_PIN GPIO_PIN_7 -#define UART_RX_PIN GPIO_PIN_8 +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF7_USART1 +#define UART_TX_PIN GPIO_PIN_9 +#define UART_RX_PIN GPIO_PIN_10 //--------------------------------------------------------------------+ // RCC Clock @@ -103,16 +103,24 @@ static void SystemClock_Config(void) { // USB Clock __HAL_RCC_SYSCFG_CLK_ENABLE(); - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USBPHY; - PeriphClkInit.UsbPhyClockSelection = RCC_USBPHYCLKSOURCE_HSE; - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + RCC_PeriphCLKInitTypeDef usb_clk_init = { 0}; + usb_clk_init.PeriphClockSelection = RCC_PERIPHCLK_USBPHY; + usb_clk_init.UsbPhyClockSelection = RCC_USBPHYCLKSOURCE_HSE; + if (HAL_RCCEx_PeriphCLKConfig(&usb_clk_init) != HAL_OK) { Error_Handler(); } /** Set the OTG PHY reference clock selection */ HAL_SYSCFG_SetOTGPHYReferenceClockSelection(SYSCFG_OTG_HS_PHY_CLK_SELECT_1); + + // USART clock + RCC_PeriphCLKInitTypeDef uart_clk_init = { 0}; + uart_clk_init.PeriphClockSelection = RCC_PERIPHCLK_USART1; + uart_clk_init.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; + if (HAL_RCCEx_PeriphCLKConfig(&uart_clk_init) != HAL_OK) { + Error_Handler(); + } } static void SystemPower_Config(void) { diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 94294b25d..dd22b7d45 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -106,7 +106,7 @@ void board_init(void) { GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM; GPIO_InitStruct.Alternate = UART_GPIO_AF; HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); @@ -121,7 +121,6 @@ void board_init(void) { UartHandle.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; UartHandle.Init.ClockPrescaler = UART_PRESCALER_DIV1; UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; - HAL_UART_Init(&UartHandle); /* Configure USB GPIOs */ @@ -196,8 +195,6 @@ void board_init(void) { USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; #endif // USB_OTG_FS - - } //--------------------------------------------------------------------+ From 214a4afa6aafe9daac6c1c304eb305b44e8cf86d Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 11:53:40 +0700 Subject: [PATCH 30/82] dwc2 flush tx,rx fifo in dcd_init() --- src/portable/synopsys/dwc2/dcd_dwc2.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 5c5450ac2..ac93632be 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -447,6 +447,14 @@ void dcd_init(uint8_t rhport) { // (non zero-length packet), send STALL back and discard. dwc2->dcfg |= DCFG_NZLSOHSK; + // flush all TX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_TXFFLSH | (0x10u << GRSTCTL_TXFNUM_Pos); + while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} + + // flush RX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_RXFFLSH; + while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} + // Clear all interrupts uint32_t int_mask = dwc2->gintsts; dwc2->gintsts |= int_mask; From 3e140756dc5e3761209bf5b399621e6c0ed1dadd Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 12:08:45 +0700 Subject: [PATCH 31/82] update stm32u5xx_hal_driver, fix build with old u575 board --- hw/bsp/stm32u5/family.c | 17 +++++++++-------- tools/get_deps.py | 2 +- 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index dd22b7d45..d2287e9fc 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -37,10 +37,11 @@ #pragma GCC diagnostic pop #endif -static void Error_Handler(void) { +#include "bsp/board_api.h" + +TU_ATTR_UNUSED static void Error_Handler(void) { } -#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ @@ -152,12 +153,6 @@ void board_init(void) { GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - /* Enable USB power on Pwrctrl CR2 register */ - HAL_PWREx_EnableVddUSB(); - - /* USB clock enable */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - // Enable VBUS sense (B device) via pin PA9 USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; #else @@ -169,6 +164,12 @@ void board_init(void) { USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + /* USB clock enable */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + #else // STM59x/Ax/Fx/Gx only have 1 USB HS port diff --git a/tools/get_deps.py b/tools/get_deps.py index 8f93ca61f..a0121f400 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -153,7 +153,7 @@ deps_optional = { '675c32a75df37f39d50d61f51cb0dcf53f07e1cb', 'stm32l5'], 'hw/mcu/st/stm32u5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git', - '2e1d4cdb386e33391cb261dfff4fefa92e4aa35a', + '4d93097a67928e9377e655ddd14622adc31b9770', 'stm32u5'], 'hw/mcu/st/stm32wbxx_hal_driver': ['https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git', '2c5f06638be516c1b772f768456ba637f077bac8', From 765ba4b9ac3f4670d80e81ec2a9d5a44c70939dc Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 16:21:45 +0700 Subject: [PATCH 32/82] update doc to add supported mcus --- README.rst | 3 +- docs/reference/supported.rst | 56 ++++++++++++++++++++++++------------ 2 files changed, 40 insertions(+), 19 deletions(-) diff --git a/README.rst b/README.rst index aef310b98..08bc78654 100644 --- a/README.rst +++ b/README.rst @@ -34,6 +34,7 @@ The stack supports the following MCUs: - **Allwinner:** F1C100s/F1C200s - **Analog:** MAX3421e (aka Arduino usb host shield) +- **Bridgetek:** FT90x - **Broadcom:** BCM2837, BCM2711 - **Dialog:** DA1469x - **Espressif:** ESP32-S2, ESP32-S3 @@ -57,7 +58,7 @@ The stack supports the following MCUs: - **Silabs:** EFM32GG - **Sony:** CXD56 -- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+, WB +- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+ U5, WB - **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri - **WCH:** CH32V307 diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index aed64782c..76b1d993e 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -8,6 +8,12 @@ Supported MCUs +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Manufacturer | Family | Device | Host | Highspeed | Driver | Note | +==============+=======================+========+======+===========+===================+==============+ +| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Brigetek | FT90x | ✔ | | ✔ | ft9xx | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | @@ -17,36 +23,46 @@ Supported MCUs | GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Infineon | XMC4500 | ✔ | | ✖ | dwc2 | | ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ +| MicroChip | SAM | D11, D21 | ✔ | | ✖ | samd | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | D51, E5x | ✔ | | ✖ | samd | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | G55 | ✔ | | ✖ | samg | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | L21, L22 | ✔ | | ✖ | samd | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | | +| +-----+-----------------+--------+------+-----------+-------------------+--------------+ +| | PIC | 24 | ✔ | | | pic | ci_fs variant| +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant| +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | dsPIC33 | ✔ | | | pic | ci_fs variant| +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | 32mz | ✔ | | | pic32mz | musb variant | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| MicroChip | SAM D11, D21 | ✔ | | ✖ | samd | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM D51, E5x | ✔ | | ✖ | samd | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM G55 | ✔ | | ✖ | samg | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM L21, L22 | ✔ | | ✖ | samd | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM E70,S70,V70,V71 | ✔ | | ✔ | samx7x | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant| ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | NordicSemi | nRF52833, nRF52840 | ✔ | ✖ | ✖ | nrf5x | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | nRF5340 | ✔ | ✖ | ✖ | nrf5x | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Nuvoton | NUC120 | ✔ | ✖ | ✖ | | | +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC121/NUC125 | ✔ | ✖ | ✖ | | | +| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC126 | ✔ | ✖ | ✖ | | | +| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC505 | ✔ | | ✔ | | | +| | NUC505 | ✔ | | ✔ | nuc505 | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | | | +-------------+--------+------+-----------+-------------------+--------------+ | | | RT11xx | ✔ | ✔ | ✔ | ci_hs | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | Kinetis | KL25 | ✔ | ⚠ | ✖ | | | +| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | | | +-------------+--------+------+-----------+-------------------+--------------+ -| | | K32L2 | ✔ | | ✖ | | | +| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant| | +---------+-------------+--------+------+-----------+-------------------+--------------+ | | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------+--------+------+-----------+-------------------+--------------+ @@ -59,12 +75,16 @@ Supported MCUs | | | 54 | ✔ | | ✔ | lpc_ip3511 | | | | +-------------+--------+------+-----------+-------------------+--------------+ | | | 55 | ✔ | | ✔ | lpc_ip3511 | | +| +---------+-------------+--------+------+-----------+-------------------+--------------+ +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | | +-----+-----------------+--------+------+-----------+-------------------+--------------+ -| | RA | XXX | ✔ | ✔ | | rusb2 | | +| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ @@ -96,7 +116,7 @@ Supported MCUs | +----+------------------+--------+------+-----------+-------------------+--------------+ | | L4+ | ✔ | | | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | U5 | ⚠ | | | dwc2 | | +| | U5 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | WBx5 | ✔ | | | stm32_fsdev | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ From 86f00f6b499208d2e1254709ad6f80878f73a825 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 31 Oct 2023 20:45:06 +0100 Subject: [PATCH 33/82] Fix STM32F7 OTG_HS GPIO alt mapping. --- hw/bsp/stm32f7/family.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 18cee073d..61f1d2a7f 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -182,7 +182,7 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + GPIO_InitStruct.Alternate = GPIO_AF12_OTG_HS_FS; HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); // Enable HS VBUS sense (B device) via pin PB13 @@ -192,8 +192,8 @@ void board_init(void) { GPIO_InitStruct.Pin = GPIO_PIN_13; GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + GPIO_InitStruct.Alternate = GPIO_AF12_OTG_HS_FS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); /* Enable PHYC Clocks */ __HAL_RCC_OTGPHYC_CLK_ENABLE(); From bf2e54e3d31150e62a86f092c97959a2c9b97924 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 31 Oct 2023 20:46:55 +0100 Subject: [PATCH 34/82] Add STM32F4 OTG_FS pin to BSP. --- hw/bsp/stm32f4/family.c | 38 +++++++++++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 5 deletions(-) diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 2a599e5c4..fb0347aba 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -99,6 +99,7 @@ void board_init(void) { HAL_UART_Init(&UartHandle); #endif +#if BOARD_TUD_RHPORT == 0 /* Configure USB FS GPIOs */ __HAL_RCC_GPIOA_CLK_ENABLE(); @@ -124,6 +125,38 @@ void board_init(void) { GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + // Enable USB OTG clock + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); +#else + /* Configure USB HS GPIOs */ + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /* Configure USB D+ D- Pins */ + GPIO_InitStruct.Pin = GPIO_PIN_14 | GPIO_PIN_15; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF12_OTG_HS_FS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_13; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* ID Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_OTG_HS_FS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + // Enable USB OTG clock + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); +#endif + #ifdef STM32F412Zx /* Configure POWER_SWITCH IO pin */ __HAL_RCC_GPIOG_CLK_ENABLE(); @@ -133,11 +166,6 @@ void board_init(void) { HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); #endif - // Enable USB OTG clock - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - -// __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); - board_vbus_sense_init(); } From de02748504922eba1032da8afb736a7bd75c8ea4 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 31 Oct 2023 21:09:58 +0100 Subject: [PATCH 35/82] Update make --- hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake | 1 + hw/bsp/stm32f4/boards/pyboardv11/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f407disco/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f411disco/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f412disco/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake | 1 + hw/bsp/stm32f4/family.mk | 5 ++++- 10 files changed, 13 insertions(+), 1 deletion(-) diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake b/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake index 4910d3a88..fff6c502d 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F405RGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F405xx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.cmake b/hw/bsp/stm32f4/boards/pyboardv11/board.cmake index 4910d3a88..fff6c502d 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.cmake +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F405RGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F405xx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake index fab6a42d2..bf2bef38b 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F401VCTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F405xx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake index c8f0330ed..b2514dc5e 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F407VGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F407xx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake index d16db508f..185507d7f 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411CEUx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F411xE + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake index d7c32c27d..80cf94160 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411VETx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F411xE + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake index 805332db8..f9e834409 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F412ZGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F412Zx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake index 805332db8..f9e834409 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F412ZGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F412Zx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake index 31ec6f700..524ff8786 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F439ZITX_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F439xx + BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 38592ecb0..0f4c792ab 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -8,11 +8,14 @@ ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 +PORT ?= 0 + # -------------- # Compiler Flags # -------------- CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F4 + -DCFG_TUSB_MCU=OPT_MCU_STM32F4 \ + -DBOARD_TUD_RHPORT=$(PORT) # GCC Flags CFLAGS_GCC += \ From 484937a042a5786ec0ed60bb9093bd71f0f6a549 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 1 Nov 2023 10:40:20 +0700 Subject: [PATCH 36/82] update readme, add sponsor section --- README.rst | 39 +++++++++++++++++++++-------------- docs/assets/adafruit_logo.svg | 20 ++++++++++++++++++ 2 files changed, 44 insertions(+), 15 deletions(-) create mode 100644 docs/assets/adafruit_logo.svg diff --git a/README.rst b/README.rst index 08bc78654..25c53bd75 100644 --- a/README.rst +++ b/README.rst @@ -1,14 +1,15 @@ +|Build Status| |Documentation Status| |Fuzzing Status| |License| + +TinyUSB +======= + .. figure:: docs/assets/logo.svg :alt: TinyUSB -|Build Status| |Documentation Status| |Fuzzing Status| |License| - TinyUSB is an open-source cross-platform USB Host/Device stack for embedded system, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events are deferred then handled in -the non-ISR task function. - -Please take a look at the online `documentation `__. +the non-ISR task function. Check out the online `documentation `__ for more details. .. figure:: docs/assets/stack.svg :width: 500px @@ -16,16 +17,24 @@ Please take a look at the online `documentation `__. :: - . - ├── docs # Documentation - ├── examples # Sample with Makefile build support - ├── hw - │ ├── bsp # Supported boards source files - │ └── mcu # Low level mcu core & peripheral drivers - ├── lib # Sources from 3rd party such as freeRTOS, fatfs ... - ├── src # All sources files for TinyUSB stack itself. - ├── test # Unit tests for the stack - └── tools # Files used internally + . + ├── docs # Documentation + ├── examples # Sample with Makefile build support + ├── hw + │ ├── bsp # Supported boards source files + │ └── mcu # Low level mcu core & peripheral drivers + ├── lib # Sources from 3rd party such as freeRTOS, fatfs ... + ├── src # All sources files for TinyUSB stack itself. + ├── test # Unit tests for the stack + └── tools # Files used internally + +Sponsors +======== + +TinyUSB is funded by + +.. figure:: docs/assets/adafruit_logo.svg + :alt: Adafruit Supported MCUs ============== diff --git a/docs/assets/adafruit_logo.svg b/docs/assets/adafruit_logo.svg new file mode 100644 index 000000000..48ec76b93 --- /dev/null +++ b/docs/assets/adafruit_logo.svg @@ -0,0 +1,20 @@ + + + + + + + + + + + + + + + + + + From 0ff327f25fddb4174f32d1d9fbf428f149dcd974 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 1 Nov 2023 11:20:18 +0700 Subject: [PATCH 37/82] resize logo, add white background --- docs/assets/adafruit_logo.svg | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/assets/adafruit_logo.svg b/docs/assets/adafruit_logo.svg index 48ec76b93..cafd5a10e 100644 --- a/docs/assets/adafruit_logo.svg +++ b/docs/assets/adafruit_logo.svg @@ -1,7 +1,8 @@ - + + From 04c12d302ea57d1844add290bf51f83231280e47 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 1 Nov 2023 11:23:01 +0700 Subject: [PATCH 38/82] add target link to adafruit logo --- README.rst | 1 + 1 file changed, 1 insertion(+) diff --git a/README.rst b/README.rst index 25c53bd75..130da402b 100644 --- a/README.rst +++ b/README.rst @@ -35,6 +35,7 @@ TinyUSB is funded by .. figure:: docs/assets/adafruit_logo.svg :alt: Adafruit + :target: https://www.adafruit.com Supported MCUs ============== From 7c56c05c9abbb018bef2ef0b4ca4978644e7b267 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 1 Nov 2023 11:51:34 +0700 Subject: [PATCH 39/82] more readme --- README.rst | 99 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 61 insertions(+), 38 deletions(-) diff --git a/README.rst b/README.rst index 130da402b..bb1555a1a 100644 --- a/README.rst +++ b/README.rst @@ -37,44 +37,6 @@ TinyUSB is funded by :alt: Adafruit :target: https://www.adafruit.com -Supported MCUs -============== - -The stack supports the following MCUs: - -- **Allwinner:** F1C100s/F1C200s -- **Analog:** MAX3421e (aka Arduino usb host shield) -- **Bridgetek:** FT90x -- **Broadcom:** BCM2837, BCM2711 -- **Dialog:** DA1469x -- **Espressif:** ESP32-S2, ESP32-S3 -- **GigaDevice:** GD32VF103 -- **Infineon:** XMC4500 -- **MicroChip:** SAMD11, SAMD21, SAMD51, SAME5x, SAMG55, SAML21, SAML22, SAME7x -- **NordicSemi:** nRF52833, nRF52840, nRF5340 -- **Nuvoton:** NUC120, NUC121/NUC125, NUC126, NUC505 -- **NXP:** - - - iMX RT Series: RT10xx, RT11xx - - Kinetis: KL25, K32L2 - - LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 - - MCX: N9x - -- **Raspberry Pi:** RP2040 -- **Renesas:** - - - RX Series: 63n, 65n, 72n - - RA Series: 4m1, 4m3, 6m1, 6m5 - -- **Silabs:** EFM32GG -- **Sony:** CXD56 -- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+ U5, WB -- **TI:** MSP430, MSP432E4, TM4C123 -- **ValentyUSB:** eptri -- **WCH:** CH32V307 - -Here is the list of `Supported Devices`_ that can be used with provided examples. - Device Stack ============ @@ -123,6 +85,67 @@ TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) - `RT-Thread `_: `repo `_ - **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its `own repo `_ +Supported CPUs +============== + +Following CPUs are supported, check out `Supported Devices`_ for comprehensive list of driver, features for each CPU. + ++--------------+------------------------------------------------------------+ +| Manufacturer | Family | ++==============+============================================================+ +| Allwinner | F1C100s/F1C200s | ++--------------+------------------------------------------------------------+ +| Analog | MAX3421E (usb host shield) | ++--------------+------------------------------------------------------------+ +| Brigetek | FT90x | ++--------------+------------------------------------------------------------+ +| Broadcom | BCM2711, BCM2837 | ++--------------+------------------------------------------------------------+ +| Dialog | DA1469x | ++--------------+------------------------------------------------------------+ +| Espressif | ESP32 S2, S3 | ++--------------+------------------------------------------------------------+ +| GigaDevice | GD32VF103 | ++--------------+------------------------------------------------------------+ +| Infineon | XMC4500 | ++--------------+-----+------------------------------------------------------+ +| MicroChip | SAM | D11, D21, D51, E5x, G55, L2x, E7x, S7x, V7x | +| +-----+------------------------------------------------------+ +| | PIC | 24, 32mm, 32mk, 32mx, 32mz, dsPIC33 | ++--------------+-----+------------------------------------------------------+ +| Mind Montion | mm32 | ++--------------+------------------------------------------------------------+ +| NordicSemi | nRF52833, nRF52840, nRF5340 | ++--------------+------------------------------------------------------------+ +| Nuvoton | NUC 120, 121, 125, 126, 505 | ++--------------+---------+--------------------------------------------------+ +| NXP | iMXRT | RT10xx, RT11xx | +| +---------+--------------------------------------------------+ +| | Kinetis | KL, K32L2 | +| +---------+--------------------------------------------------+ +| | LPC | 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 | +| +---------+--------------------------------------------------+ +| | MCX | N9 | ++--------------+---------+--------------------------------------------------+ +| Raspberry Pi | RP2040 | ++--------------+-----+------------------------------------------------------+ +| Renesas | RX | 63N, 65N, 72N | ++--------------+-----+------------------------------------------------------+ +| | RA | 4M1, 4M3, 6M1, 6M5 | ++--------------+-----+------------------------------------------------------+ +| Silabs | EFM32GG12 | ++--------------+------------------------------------------------------------+ +| Sony | CXD56 | ++--------------+------------------------------------------------------------+ +| ST STM32 | F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+ U5, WB | ++--------------+------------------------------------------------------------+ +| TI | MSP430, MSP432E4, TM4C123 | ++--------------+------------------------------------------------------------+ +| ValentyUSB | eptri | ++--------------+------------------------------------------------------------+ +| WCH | CH32V307 | ++--------------+------------------------------------------------------------+ + Docs ==== From 06c9d9a79a4426ece73052edca885f890b997fc4 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 1 Nov 2023 16:36:28 +0700 Subject: [PATCH 40/82] remove legacy driver st/synopsys --- src/portable/st/synopsys/dcd_synopsys.c | 1240 ----------------- src/portable/st/synopsys/synopsys_common.h | 1465 -------------------- 2 files changed, 2705 deletions(-) delete mode 100644 src/portable/st/synopsys/dcd_synopsys.c delete mode 100644 src/portable/st/synopsys/synopsys_common.h diff --git a/src/portable/st/synopsys/dcd_synopsys.c b/src/portable/st/synopsys/dcd_synopsys.c deleted file mode 100644 index 2fc3adb4f..000000000 --- a/src/portable/st/synopsys/dcd_synopsys.c +++ /dev/null @@ -1,1240 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018 Scott Shawcroft, 2019 William D. Jones for Adafruit Industries - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * Copyright (c) 2020 Jan Duempelmann - * Copyright (c) 2020 Reinhard Panhuber - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -// Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) -// We disable SOF for now until needed later on -#define USE_SOF 0 - -#if defined (STM32F105x8) || defined (STM32F105xB) || defined (STM32F105xC) || \ - defined (STM32F107xB) || defined (STM32F107xC) -#define STM32F1_SYNOPSYS -#endif - -#if defined (STM32L475xx) || defined (STM32L476xx) || \ - defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || \ - defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define STM32L4_SYNOPSYS -#endif - -#if CFG_TUD_ENABLED && \ - ( (CFG_TUSB_MCU == OPT_MCU_STM32F1 && defined(STM32F1_SYNOPSYS)) || \ - CFG_TUSB_MCU == OPT_MCU_STM32F2 || \ - CFG_TUSB_MCU == OPT_MCU_STM32F4 || \ - CFG_TUSB_MCU == OPT_MCU_STM32F7 || \ - CFG_TUSB_MCU == OPT_MCU_STM32H7 || \ - (CFG_TUSB_MCU == OPT_MCU_STM32L4 && defined(STM32L4_SYNOPSYS) || \ - CFG_TUSB_MCU == OPT_MCU_GD32VF103 ) \ - ) - -// EP_MAX : Max number of bi-directional endpoints including EP0 -// EP_FIFO_SIZE : Size of dedicated USB SRAM -#if CFG_TUSB_MCU == OPT_MCU_STM32F1 -#include "stm32f1xx.h" -#define EP_MAX_FS 4 -#define EP_FIFO_SIZE_FS 1280 - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F2 -#include "stm32f2xx.h" -#define EP_MAX_FS USB_OTG_FS_MAX_IN_ENDPOINTS -#define EP_FIFO_SIZE_FS USB_OTG_FS_TOTAL_FIFO_SIZE - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F4 -#include "stm32f4xx.h" -#define EP_MAX_FS USB_OTG_FS_MAX_IN_ENDPOINTS -#define EP_FIFO_SIZE_FS USB_OTG_FS_TOTAL_FIFO_SIZE -#define EP_MAX_HS USB_OTG_HS_MAX_IN_ENDPOINTS -#define EP_FIFO_SIZE_HS USB_OTG_HS_TOTAL_FIFO_SIZE - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H7 -#include "stm32h7xx.h" -#define EP_MAX_FS 9 -#define EP_FIFO_SIZE_FS 4096 -#define EP_MAX_HS 9 -#define EP_FIFO_SIZE_HS 4096 - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F7 -#include "stm32f7xx.h" -#define EP_MAX_FS 6 -#define EP_FIFO_SIZE_FS 1280 -#define EP_MAX_HS 9 -#define EP_FIFO_SIZE_HS 4096 - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 -#include "stm32l4xx.h" -#define EP_MAX_FS 6 -#define EP_FIFO_SIZE_FS 1280 - -#elif CFG_TUSB_MCU == OPT_MCU_GD32VF103 -#include "synopsys_common.h" - -// for remote wakeup delay -#define __NOP() __asm volatile ("nop") - -// These numbers are the same for the whole GD32VF103 family. -#define OTG_FS_IRQn 86 -#define EP_MAX_FS 4 -#define EP_FIFO_SIZE_FS 1280 - -// The GD32VF103 is a RISC-V MCU, which implements the ECLIC Core-Local -// Interrupt Controller by Nuclei. It is nearly API compatible to the -// NVIC used by ARM MCUs. -#define ECLIC_INTERRUPT_ENABLE_BASE 0xD2001001UL - -#define NVIC_EnableIRQ __eclic_enable_interrupt -#define NVIC_DisableIRQ __eclic_disable_interrupt - -static inline void __eclic_enable_interrupt (uint32_t irq) { - *(volatile uint8_t*)(ECLIC_INTERRUPT_ENABLE_BASE + (irq * 4)) = 1; -} - -static inline void __eclic_disable_interrupt (uint32_t irq){ - *(volatile uint8_t*)(ECLIC_INTERRUPT_ENABLE_BASE + (irq * 4)) = 0; -} - -#else -#error "Unsupported MCUs" -#endif - -#include "device/dcd.h" - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -// On STM32 we associate Port0 to OTG_FS, and Port1 to OTG_HS -#if TUD_OPT_RHPORT == 0 -#define EP_MAX EP_MAX_FS -#define EP_FIFO_SIZE EP_FIFO_SIZE_FS -#define RHPORT_REGS_BASE USB_OTG_FS_PERIPH_BASE -#define RHPORT_IRQn OTG_FS_IRQn - -#else -#define EP_MAX EP_MAX_HS -#define EP_FIFO_SIZE EP_FIFO_SIZE_HS -#define RHPORT_REGS_BASE USB_OTG_HS_PERIPH_BASE -#define RHPORT_IRQn OTG_HS_IRQn - -#endif - -#define GLOBAL_BASE(_port) ((USB_OTG_GlobalTypeDef*) RHPORT_REGS_BASE) -#define DEVICE_BASE(_port) (USB_OTG_DeviceTypeDef *) (RHPORT_REGS_BASE + USB_OTG_DEVICE_BASE) -#define OUT_EP_BASE(_port) (USB_OTG_OUTEndpointTypeDef *) (RHPORT_REGS_BASE + USB_OTG_OUT_ENDPOINT_BASE) -#define IN_EP_BASE(_port) (USB_OTG_INEndpointTypeDef *) (RHPORT_REGS_BASE + USB_OTG_IN_ENDPOINT_BASE) -#define FIFO_BASE(_port, _x) ((volatile uint32_t *) (RHPORT_REGS_BASE + USB_OTG_FIFO_BASE + (_x) * USB_OTG_FIFO_SIZE)) - -enum -{ - DCD_HIGH_SPEED = 0, // Highspeed mode - DCD_FULL_SPEED_USE_HS = 1, // Full speed in Highspeed port (probably with internal PHY) - DCD_FULL_SPEED = 3, // Full speed with internal PHY -}; - -static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[2]; - -typedef struct { - uint8_t * buffer; - tu_fifo_t * ff; - uint16_t total_len; - uint16_t max_size; - uint8_t interval; -} xfer_ctl_t; - -typedef volatile uint32_t * usb_fifo_t; - -xfer_ctl_t xfer_status[EP_MAX][2]; -#define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir] - -// EP0 transfers are limited to 1 packet - larger sizes has to be split -static uint16_t ep0_pending[2]; // Index determines direction as tusb_dir_t type - -// TX FIFO RAM allocation so far in words - RX FIFO size is readily available from usb_otg->GRXFSIZ -static uint16_t _allocated_fifo_words_tx; // TX FIFO size in words (IN EPs) -static bool _out_ep_closed; // Flag to check if RX FIFO size needs an update (reduce its size) - -// Calculate the RX FIFO size according to recommendations from reference manual -static inline uint16_t calc_rx_ff_size(uint16_t ep_size) -{ - return 15 + 2*(ep_size/4) + 2*EP_MAX; -} - -static void update_grxfsiz(uint8_t rhport) -{ - (void) rhport; - - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - - // Determine largest EP size for RX FIFO - uint16_t max_epsize = 0; - for (uint8_t epnum = 0; epnum < EP_MAX; epnum++) - { - max_epsize = tu_max16(max_epsize, xfer_status[epnum][TUSB_DIR_OUT].max_size); - } - - // Update size of RX FIFO - usb_otg->GRXFSIZ = calc_rx_ff_size(max_epsize); -} - -// Setup the control endpoint 0. -static void bus_reset(uint8_t rhport) -{ - (void) rhport; - - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - tu_memclr(xfer_status, sizeof(xfer_status)); - _out_ep_closed = false; - - // clear device address - dev->DCFG &= ~USB_OTG_DCFG_DAD_Msk; - - // 1. NAK for all OUT endpoints - for(uint8_t n = 0; n < EP_MAX; n++) { - out_ep[n].DOEPCTL |= USB_OTG_DOEPCTL_SNAK; - } - - // 2. Un-mask interrupt bits - dev->DAINTMSK = (1 << USB_OTG_DAINTMSK_OEPM_Pos) | (1 << USB_OTG_DAINTMSK_IEPM_Pos); - dev->DOEPMSK = USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM; - dev->DIEPMSK = USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM; - - // "USB Data FIFOs" section in reference manual - // Peripheral FIFO architecture - // - // The FIFO is split up in a lower part where the RX FIFO is located and an upper part where the TX FIFOs start. - // We do this to allow the RX FIFO to grow dynamically which is possible since the free space is located - // between the RX and TX FIFOs. This is required by ISO OUT EPs which need a bigger FIFO than the standard - // configuration done below. - // - // Dynamically FIFO sizes are of interest only for ISO EPs since all others are usually not opened and closed. - // All EPs other than ISO are opened as soon as the driver starts up i.e. when the host sends a - // configure interface command. Hence, all IN EPs other the ISO will be located at the top. IN ISO EPs are usually - // opened when the host sends an additional command: setInterface. At this point in time - // the ISO EP will be located next to the free space and can change its size. In case more IN EPs change its size - // an additional memory - // - // --------------- 320 or 1024 ( 1280 or 4096 bytes ) - // | IN FIFO 0 | - // --------------- (320 or 1024) - 16 - // | IN FIFO 1 | - // --------------- (320 or 1024) - 16 - x - // | . . . . | - // --------------- (320 or 1024) - 16 - x - y - ... - z - // | IN FIFO MAX | - // --------------- - // | FREE | - // --------------- GRXFSIZ - // | OUT FIFO | - // | ( Shared ) | - // --------------- 0 - // - // According to "FIFO RAM allocation" section in RM, FIFO RAM are allocated as follows (each word 32-bits): - // - Each EP IN needs at least max packet size, 16 words is sufficient for EP0 IN - // - // - All EP OUT shared a unique OUT FIFO which uses - // - 13 for setup packets + control words (up to 3 setup packets). - // - 1 for global NAK (not required/used here). - // - Largest-EPsize / 4 + 1. ( FS: 64 bytes, HS: 512 bytes). Recommended is "2 x (Largest-EPsize/4) + 1" - // - 2 for each used OUT endpoint - // - // Therefore GRXFSIZ = 13 + 1 + 1 + 2 x (Largest-EPsize/4) + 2 x EPOUTnum - // - FullSpeed (64 Bytes ): GRXFSIZ = 15 + 2 x 16 + 2 x EP_MAX = 47 + 2 x EP_MAX - // - Highspeed (512 bytes): GRXFSIZ = 15 + 2 x 128 + 2 x EP_MAX = 271 + 2 x EP_MAX - // - // NOTE: Largest-EPsize & EPOUTnum is actual used endpoints in configuration. Since DCD has no knowledge - // of the overall picture yet. We will use the worst scenario: largest possible + EP_MAX - // - // For Isochronous, largest EP size can be 1023/1024 for FS/HS respectively. In addition if multiple ISO - // are enabled at least "2 x (Largest-EPsize/4) + 1" are recommended. Maybe provide a macro for application to - // overwrite this. - - usb_otg->GRXFSIZ = calc_rx_ff_size(TUD_OPT_HIGH_SPEED ? 512 : 64); - - _allocated_fifo_words_tx = 16; - - // Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word ) - usb_otg->DIEPTXF0_HNPTXFSIZ = (16 << USB_OTG_TX0FD_Pos) | (EP_FIFO_SIZE/4 - _allocated_fifo_words_tx); - - // Fixed control EP0 size to 64 bytes - in_ep[0].DIEPCTL &= ~(0x03 << USB_OTG_DIEPCTL_MPSIZ_Pos); - xfer_status[0][TUSB_DIR_OUT].max_size = xfer_status[0][TUSB_DIR_IN].max_size = 64; - - out_ep[0].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos); - - usb_otg->GINTMSK |= USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IEPINT; -} - -// Set turn-around timeout according to link speed -extern uint32_t SystemCoreClock; -static void set_turnaround(USB_OTG_GlobalTypeDef * usb_otg, tusb_speed_t speed) -{ - usb_otg->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; - - if ( speed == TUSB_SPEED_HIGH ) - { - // Use fixed 0x09 for Highspeed - usb_otg->GUSBCFG |= (0x09 << USB_OTG_GUSBCFG_TRDT_Pos); - } - else - { - // Turnaround timeout depends on the MCU clock - uint32_t turnaround; - - if ( SystemCoreClock >= 32000000U ) - turnaround = 0x6U; - else if ( SystemCoreClock >= 27500000U ) - turnaround = 0x7U; - else if ( SystemCoreClock >= 24000000U ) - turnaround = 0x8U; - else if ( SystemCoreClock >= 21800000U ) - turnaround = 0x9U; - else if ( SystemCoreClock >= 20000000U ) - turnaround = 0xAU; - else if ( SystemCoreClock >= 18500000U ) - turnaround = 0xBU; - else if ( SystemCoreClock >= 17200000U ) - turnaround = 0xCU; - else if ( SystemCoreClock >= 16000000U ) - turnaround = 0xDU; - else if ( SystemCoreClock >= 15000000U ) - turnaround = 0xEU; - else - turnaround = 0xFU; - - // Fullspeed depends on MCU clocks, but we will use 0x06 for 32+ Mhz - usb_otg->GUSBCFG |= (turnaround << USB_OTG_GUSBCFG_TRDT_Pos); - } -} - -static tusb_speed_t get_speed(uint8_t rhport) -{ - (void) rhport; - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - uint32_t const enum_spd = (dev->DSTS & USB_OTG_DSTS_ENUMSPD_Msk) >> USB_OTG_DSTS_ENUMSPD_Pos; - return (enum_spd == DCD_HIGH_SPEED) ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL; -} - -static void set_speed(uint8_t rhport, tusb_speed_t speed) -{ - uint32_t bitvalue; - - if ( rhport == 1 ) - { - bitvalue = ((TUSB_SPEED_HIGH == speed) ? DCD_HIGH_SPEED : DCD_FULL_SPEED_USE_HS); - } - else - { - bitvalue = DCD_FULL_SPEED; - } - - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - - // Clear and set speed bits - dev->DCFG &= ~(3 << USB_OTG_DCFG_DSPD_Pos); - dev->DCFG |= (bitvalue << USB_OTG_DCFG_DSPD_Pos); -} - -#if defined(USB_HS_PHYC) -static bool USB_HS_PHYCInit(void) -{ - USB_HS_PHYC_GlobalTypeDef *usb_hs_phyc = (USB_HS_PHYC_GlobalTypeDef*) USB_HS_PHYC_CONTROLLER_BASE; - - // Enable LDO: Note STM32F72/3xx Reference Manual rev 3 June 2018 incorrectly defined this bit as Disabled !! - usb_hs_phyc->USB_HS_PHYC_LDO |= USB_HS_PHYC_LDO_ENABLE; - - // Wait until LDO ready - while ( 0 == (usb_hs_phyc->USB_HS_PHYC_LDO & USB_HS_PHYC_LDO_STATUS) ) {} - - uint32_t phyc_pll = 0; - - // TODO Try to get HSE_VALUE from registers instead of depending CFLAGS - switch ( HSE_VALUE ) - { - case 12000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_12MHZ ; break; - case 12500000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_12_5MHZ ; break; - case 16000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_16MHZ ; break; - case 24000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_24MHZ ; break; - case 25000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_25MHZ ; break; - case 32000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_Msk ; break; // Value not defined in header - default: - TU_ASSERT(0); - } - usb_hs_phyc->USB_HS_PHYC_PLL = phyc_pll; - - // Control the tuning interface of the High Speed PHY - // Use magic value (USB_HS_PHYC_TUNE_VALUE) from ST driver - usb_hs_phyc->USB_HS_PHYC_TUNE |= 0x00000F13U; - - // Enable PLL internal PHY - usb_hs_phyc->USB_HS_PHYC_PLL |= USB_HS_PHYC_PLL_PLLEN; - - // Original ST code has 2 ms delay for PLL stabilization. - // Primitive test shows that more than 10 USB un/replug cycle showed no error with enumeration - - return true; -} -#endif - -static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t const dir, uint16_t const num_packets, uint16_t total_bytes) -{ - (void) rhport; - - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - // EP0 is limited to one packet each xfer - // We use multiple transaction of xfer->max_size length to get a whole transfer done - if(epnum == 0) { - xfer_ctl_t * const xfer = XFER_CTL_BASE(epnum, dir); - total_bytes = tu_min16(ep0_pending[dir], xfer->max_size); - ep0_pending[dir] -= total_bytes; - } - - // IN and OUT endpoint xfers are interrupt-driven, we just schedule them here. - if(dir == TUSB_DIR_IN) { - // A full IN transfer (multiple packets, possibly) triggers XFRC. - in_ep[epnum].DIEPTSIZ = (num_packets << USB_OTG_DIEPTSIZ_PKTCNT_Pos) | - ((total_bytes << USB_OTG_DIEPTSIZ_XFRSIZ_Pos) & USB_OTG_DIEPTSIZ_XFRSIZ_Msk); - - in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_EPENA | USB_OTG_DIEPCTL_CNAK; - // For ISO endpoint set correct odd/even bit for next frame. - if ((in_ep[epnum].DIEPCTL & USB_OTG_DIEPCTL_EPTYP) == USB_OTG_DIEPCTL_EPTYP_0 && (XFER_CTL_BASE(epnum, dir))->interval == 1) - { - // Take odd/even bit from frame counter. - uint32_t const odd_frame_now = (dev->DSTS & (1u << USB_OTG_DSTS_FNSOF_Pos)); - in_ep[epnum].DIEPCTL |= (odd_frame_now ? USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk : USB_OTG_DIEPCTL_SODDFRM_Msk); - } - // Enable fifo empty interrupt only if there are something to put in the fifo. - if(total_bytes != 0) { - dev->DIEPEMPMSK |= (1 << epnum); - } - } else { - // A full OUT transfer (multiple packets, possibly) triggers XFRC. - out_ep[epnum].DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT_Msk | USB_OTG_DOEPTSIZ_XFRSIZ); - out_ep[epnum].DOEPTSIZ |= (num_packets << USB_OTG_DOEPTSIZ_PKTCNT_Pos) | - ((total_bytes << USB_OTG_DOEPTSIZ_XFRSIZ_Pos) & USB_OTG_DOEPTSIZ_XFRSIZ_Msk); - - out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK; - if ((out_ep[epnum].DOEPCTL & USB_OTG_DOEPCTL_EPTYP) == USB_OTG_DOEPCTL_EPTYP_0 && (XFER_CTL_BASE(epnum, dir))->interval == 1) - { - // Take odd/even bit from frame counter. - uint32_t const odd_frame_now = (dev->DSTS & (1u << USB_OTG_DSTS_FNSOF_Pos)); - out_ep[epnum].DOEPCTL |= (odd_frame_now ? USB_OTG_DOEPCTL_SD0PID_SEVNFRM_Msk : USB_OTG_DOEPCTL_SODDFRM_Msk); - } - } -} - -/*------------------------------------------------------------------*/ -/* Controller API - *------------------------------------------------------------------*/ -void dcd_init (uint8_t rhport) -{ - // Programming model begins in the last section of the chapter on the USB - // peripheral in each Reference Manual. - - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - - // No HNP/SRP (no OTG support), program timeout later. - if ( rhport == 1 ) - { - // On selected MCUs HS port1 can be used with external PHY via ULPI interface -#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED - // deactivate internal PHY - usb_otg->GCCFG &= ~USB_OTG_GCCFG_PWRDWN; - - // Init The UTMI Interface - usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); - - // Select default internal VBUS Indicator and Drive for ULPI - usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); -#else - usb_otg->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; -#endif - -#if defined(USB_HS_PHYC) - // Highspeed with embedded UTMI PHYC - - // Select UTMI Interface - usb_otg->GUSBCFG &= ~USB_OTG_GUSBCFG_ULPI_UTMI_SEL; - usb_otg->GCCFG |= USB_OTG_GCCFG_PHYHSEN; - - // Enables control of a High Speed USB PHY - USB_HS_PHYCInit(); -#endif - } else - { - // Enable internal PHY - usb_otg->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; - } - - // Reset core after selecting PHY - // Wait AHB IDLE, reset then wait until it is cleared - while ((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U) {} - usb_otg->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; - while ((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST) {} - - // Restart PHY clock - *((volatile uint32_t *)(RHPORT_REGS_BASE + USB_OTG_PCGCCTL_BASE)) = 0; - - // Clear all interrupts - usb_otg->GINTSTS |= usb_otg->GINTSTS; - - // Required as part of core initialization. - // TODO: How should mode mismatch be handled? It will cause - // the core to stop working/require reset. - usb_otg->GINTMSK |= USB_OTG_GINTMSK_OTGINT | USB_OTG_GINTMSK_MMISM; - - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - - // If USB host misbehaves during status portion of control xfer - // (non zero-length packet), send STALL back and discard. - dev->DCFG |= USB_OTG_DCFG_NZLSOHSK; - - set_speed(rhport, TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL); - - // Enable internal USB transceiver, unless using HS core (port 1) with external PHY. - if (!(rhport == 1 && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED))) usb_otg->GCCFG |= USB_OTG_GCCFG_PWRDWN; - - usb_otg->GINTMSK |= USB_OTG_GINTMSK_USBRST | USB_OTG_GINTMSK_ENUMDNEM | - USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_WUIM | - USB_OTG_GINTMSK_RXFLVLM | (USE_SOF ? USB_OTG_GINTMSK_SOFM : 0); - - // Enable global interrupt - usb_otg->GAHBCFG |= USB_OTG_GAHBCFG_GINT; - - dcd_connect(rhport); -} - -void dcd_int_enable (uint8_t rhport) -{ - (void) rhport; - NVIC_EnableIRQ(RHPORT_IRQn); -} - -void dcd_int_disable (uint8_t rhport) -{ - (void) rhport; - NVIC_DisableIRQ(RHPORT_IRQn); -} - -void dcd_set_address (uint8_t rhport, uint8_t dev_addr) -{ - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - dev->DCFG = (dev->DCFG & ~USB_OTG_DCFG_DAD_Msk) | (dev_addr << USB_OTG_DCFG_DAD_Pos); - - // Response with status after changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); -} - -static void remote_wakeup_delay(void) -{ - // try to delay for 1 ms - uint32_t count = SystemCoreClock / 1000; - while ( count-- ) - { - __NOP(); - } -} - -void dcd_remote_wakeup(uint8_t rhport) -{ - (void) rhport; - - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - - // set remote wakeup - dev->DCTL |= USB_OTG_DCTL_RWUSIG; - - // enable SOF to detect bus resume - usb_otg->GINTSTS = USB_OTG_GINTSTS_SOF; - usb_otg->GINTMSK |= USB_OTG_GINTMSK_SOFM; - - // Per specs: remote wakeup signal bit must be clear within 1-15ms - remote_wakeup_delay(); - - dev->DCTL &= ~USB_OTG_DCTL_RWUSIG; -} - -void dcd_connect(uint8_t rhport) -{ - (void) rhport; - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - dev->DCTL &= ~USB_OTG_DCTL_SDIS; -} - -void dcd_disconnect(uint8_t rhport) -{ - (void) rhport; - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - dev->DCTL |= USB_OTG_DCTL_SDIS; -} - -void dcd_sof_enable(uint8_t rhport, bool en) -{ - (void) rhport; - (void) en; - - // TODO implement later -} - -/*------------------------------------------------------------------*/ -/* DCD Endpoint port - *------------------------------------------------------------------*/ - -bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) -{ - (void) rhport; - - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); - - TU_ASSERT(epnum < EP_MAX); - - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); - xfer->max_size = tu_edpt_packet_size(desc_edpt); - xfer->interval = desc_edpt->bInterval; - - uint16_t const fifo_size = (xfer->max_size + 3) / 4; // Round up to next full word - - if(dir == TUSB_DIR_OUT) - { - // Calculate required size of RX FIFO - uint16_t const sz = calc_rx_ff_size(4*fifo_size); - - // If size_rx needs to be extended check if possible and if so enlarge it - if (usb_otg->GRXFSIZ < sz) - { - TU_ASSERT(sz + _allocated_fifo_words_tx <= EP_FIFO_SIZE/4); - - // Enlarge RX FIFO - usb_otg->GRXFSIZ = sz; - } - - out_ep[epnum].DOEPCTL |= (1 << USB_OTG_DOEPCTL_USBAEP_Pos) | - (desc_edpt->bmAttributes.xfer << USB_OTG_DOEPCTL_EPTYP_Pos) | - (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DOEPCTL_SD0PID_SEVNFRM : 0) | - (xfer->max_size << USB_OTG_DOEPCTL_MPSIZ_Pos); - - dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_OEPM_Pos + epnum)); - } - else - { - // "USB Data FIFOs" section in reference manual - // Peripheral FIFO architecture - // - // --------------- 320 or 1024 ( 1280 or 4096 bytes ) - // | IN FIFO 0 | - // --------------- (320 or 1024) - 16 - // | IN FIFO 1 | - // --------------- (320 or 1024) - 16 - x - // | . . . . | - // --------------- (320 or 1024) - 16 - x - y - ... - z - // | IN FIFO MAX | - // --------------- - // | FREE | - // --------------- GRXFSIZ - // | OUT FIFO | - // | ( Shared ) | - // --------------- 0 - // - // In FIFO is allocated by following rules: - // - IN EP 1 gets FIFO 1, IN EP "n" gets FIFO "n". - - // Check if free space is available - TU_ASSERT(_allocated_fifo_words_tx + fifo_size + usb_otg->GRXFSIZ <= EP_FIFO_SIZE/4); - - _allocated_fifo_words_tx += fifo_size; - - TU_LOG(2, " Allocated %u bytes at offset %u", fifo_size*4, EP_FIFO_SIZE-_allocated_fifo_words_tx*4); - - // DIEPTXF starts at FIFO #1. - // Both TXFD and TXSA are in unit of 32-bit words. - usb_otg->DIEPTXF[epnum - 1] = (fifo_size << USB_OTG_DIEPTXF_INEPTXFD_Pos) | (EP_FIFO_SIZE/4 - _allocated_fifo_words_tx); - - in_ep[epnum].DIEPCTL |= (1 << USB_OTG_DIEPCTL_USBAEP_Pos) | - (epnum << USB_OTG_DIEPCTL_TXFNUM_Pos) | - (desc_edpt->bmAttributes.xfer << USB_OTG_DIEPCTL_EPTYP_Pos) | - (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DIEPCTL_SD0PID_SEVNFRM : 0) | - (xfer->max_size << USB_OTG_DIEPCTL_MPSIZ_Pos); - - dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_IEPM_Pos + epnum)); - } - - return true; -} - -// Close all non-control endpoints, cancel all pending transfers if any. -void dcd_edpt_close_all (uint8_t rhport) -{ - (void) rhport; - -// USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - // Disable non-control interrupt - dev->DAINTMSK = (1 << USB_OTG_DAINTMSK_OEPM_Pos) | (1 << USB_OTG_DAINTMSK_IEPM_Pos); - - for(uint8_t n = 1; n < EP_MAX; n++) - { - // disable OUT endpoint - out_ep[n].DOEPCTL = 0; - xfer_status[n][TUSB_DIR_OUT].max_size = 0; - - // disable IN endpoint - in_ep[n].DIEPCTL = 0; - xfer_status[n][TUSB_DIR_IN].max_size = 0; - } - - // reset allocated fifo IN - _allocated_fifo_words_tx = 16; -} - -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); - xfer->buffer = buffer; - xfer->ff = NULL; - xfer->total_len = total_bytes; - - // EP0 can only handle one packet - if(epnum == 0) { - ep0_pending[dir] = total_bytes; - // Schedule the first transaction for EP0 transfer - edpt_schedule_packets(rhport, epnum, dir, 1, ep0_pending[dir]); - return true; - } - - uint16_t num_packets = (total_bytes / xfer->max_size); - uint16_t const short_packet_size = total_bytes % xfer->max_size; - - // Zero-size packet is special case. - if(short_packet_size > 0 || (total_bytes == 0)) { - num_packets++; - } - - // Schedule packets to be sent within interrupt - edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes); - - return true; -} - -// The number of bytes has to be given explicitly to allow more flexible control of how many -// bytes should be written and second to keep the return value free to give back a boolean -// success message. If total_bytes is too big, the FIFO will copy only what is available -// into the USB buffer! -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) -{ - // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 - TU_ASSERT(ff->item_size == 1); - - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); - xfer->buffer = NULL; - xfer->ff = ff; - xfer->total_len = total_bytes; - - uint16_t num_packets = (total_bytes / xfer->max_size); - uint16_t const short_packet_size = total_bytes % xfer->max_size; - - // Zero-size packet is special case. - if(short_packet_size > 0 || (total_bytes == 0)) num_packets++; - - // Schedule packets to be sent within interrupt - edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes); - - return true; -} - -static void dcd_edpt_disable (uint8_t rhport, uint8_t ep_addr, bool stall) -{ - (void) rhport; - - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - if(dir == TUSB_DIR_IN) { - // Only disable currently enabled non-control endpoint - if ( (epnum == 0) || !(in_ep[epnum].DIEPCTL & USB_OTG_DIEPCTL_EPENA) ){ - in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SNAK | (stall ? USB_OTG_DIEPCTL_STALL : 0); - } else { - // Stop transmitting packets and NAK IN xfers. - in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SNAK; - while((in_ep[epnum].DIEPINT & USB_OTG_DIEPINT_INEPNE) == 0); - - // Disable the endpoint. - in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_EPDIS | (stall ? USB_OTG_DIEPCTL_STALL : 0); - while((in_ep[epnum].DIEPINT & USB_OTG_DIEPINT_EPDISD_Msk) == 0); - in_ep[epnum].DIEPINT = USB_OTG_DIEPINT_EPDISD; - } - - // Flush the FIFO, and wait until we have confirmed it cleared. - usb_otg->GRSTCTL |= (epnum << USB_OTG_GRSTCTL_TXFNUM_Pos); - usb_otg->GRSTCTL |= USB_OTG_GRSTCTL_TXFFLSH; - while((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH_Msk) != 0); - } else { - // Only disable currently enabled non-control endpoint - if ( (epnum == 0) || !(out_ep[epnum].DOEPCTL & USB_OTG_DOEPCTL_EPENA) ){ - out_ep[epnum].DOEPCTL |= stall ? USB_OTG_DOEPCTL_STALL : 0; - } else { - // Asserting GONAK is required to STALL an OUT endpoint. - // Simpler to use polling here, we don't use the "B"OUTNAKEFF interrupt - // anyway, and it can't be cleared by user code. If this while loop never - // finishes, we have bigger problems than just the stack. - dev->DCTL |= USB_OTG_DCTL_SGONAK; - while((usb_otg->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF_Msk) == 0); - - // Ditto here- disable the endpoint. - out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_EPDIS | (stall ? USB_OTG_DOEPCTL_STALL : 0); - while((out_ep[epnum].DOEPINT & USB_OTG_DOEPINT_EPDISD_Msk) == 0); - out_ep[epnum].DOEPINT = USB_OTG_DOEPINT_EPDISD; - - // Allow other OUT endpoints to keep receiving. - dev->DCTL |= USB_OTG_DCTL_CGONAK; - } - } -} - -/** - * Close an endpoint. - */ -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) -{ - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - dcd_edpt_disable(rhport, ep_addr, false); - - // Update max_size - xfer_status[epnum][dir].max_size = 0; // max_size = 0 marks a disabled EP - required for changing FIFO allocation - - if (dir == TUSB_DIR_IN) - { - uint16_t const fifo_size = (usb_otg->DIEPTXF[epnum - 1] & USB_OTG_DIEPTXF_INEPTXFD_Msk) >> USB_OTG_DIEPTXF_INEPTXFD_Pos; - uint16_t const fifo_start = (usb_otg->DIEPTXF[epnum - 1] & USB_OTG_DIEPTXF_INEPTXSA_Msk) >> USB_OTG_DIEPTXF_INEPTXSA_Pos; - // For now only the last opened endpoint can be closed without fuss. - TU_ASSERT(fifo_start == EP_FIFO_SIZE/4 - _allocated_fifo_words_tx,); - _allocated_fifo_words_tx -= fifo_size; - } - else - { - _out_ep_closed = true; // Set flag such that RX FIFO gets reduced in size once RX FIFO is empty - } -} - -void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) -{ - dcd_edpt_disable(rhport, ep_addr, true); -} - -void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; - - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - // Clear stall and reset data toggle - if(dir == TUSB_DIR_IN) { - in_ep[epnum].DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; - in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } else { - out_ep[epnum].DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; - out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; - } -} - -/*------------------------------------------------------------------*/ - -// Read a single data packet from receive FIFO -static void read_fifo_packet(uint8_t rhport, uint8_t * dst, uint16_t len) -{ - (void) rhport; - - usb_fifo_t rx_fifo = FIFO_BASE(rhport, 0); - - // Reading full available 32 bit words from fifo - uint16_t full_words = len >> 2; - for(uint16_t i = 0; i < full_words; i++) { - uint32_t tmp = *rx_fifo; - dst[0] = tmp & 0x000000FF; - dst[1] = (tmp & 0x0000FF00) >> 8; - dst[2] = (tmp & 0x00FF0000) >> 16; - dst[3] = (tmp & 0xFF000000) >> 24; - dst += 4; - } - - // Read the remaining 1-3 bytes from fifo - uint8_t bytes_rem = len & 0x03; - if(bytes_rem != 0) { - uint32_t tmp = *rx_fifo; - dst[0] = tmp & 0x000000FF; - if(bytes_rem > 1) { - dst[1] = (tmp & 0x0000FF00) >> 8; - } - if(bytes_rem > 2) { - dst[2] = (tmp & 0x00FF0000) >> 16; - } - } -} - -// Write a single data packet to EPIN FIFO -static void write_fifo_packet(uint8_t rhport, uint8_t fifo_num, uint8_t * src, uint16_t len) -{ - (void) rhport; - - usb_fifo_t tx_fifo = FIFO_BASE(rhport, fifo_num); - - // Pushing full available 32 bit words to fifo - uint16_t full_words = len >> 2; - for(uint16_t i = 0; i < full_words; i++){ - *tx_fifo = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; - src += 4; - } - - // Write the remaining 1-3 bytes into fifo - uint8_t bytes_rem = len & 0x03; - if(bytes_rem){ - uint32_t tmp_word = 0; - tmp_word |= src[0]; - if(bytes_rem > 1){ - tmp_word |= src[1] << 8; - } - if(bytes_rem > 2){ - tmp_word |= src[2] << 16; - } - *tx_fifo = tmp_word; - } -} - -static void handle_rxflvl_ints(uint8_t rhport, USB_OTG_OUTEndpointTypeDef * out_ep) { - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - usb_fifo_t rx_fifo = FIFO_BASE(rhport, 0); - - // Pop control word off FIFO - uint32_t ctl_word = usb_otg->GRXSTSP; - uint8_t pktsts = (ctl_word & USB_OTG_GRXSTSP_PKTSTS_Msk) >> USB_OTG_GRXSTSP_PKTSTS_Pos; - uint8_t epnum = (ctl_word & USB_OTG_GRXSTSP_EPNUM_Msk) >> USB_OTG_GRXSTSP_EPNUM_Pos; - uint16_t bcnt = (ctl_word & USB_OTG_GRXSTSP_BCNT_Msk) >> USB_OTG_GRXSTSP_BCNT_Pos; - - switch(pktsts) { - case 0x01: // Global OUT NAK (Interrupt) - break; - - case 0x02: // Out packet recvd - { - xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); - - // Read packet off RxFIFO - if (xfer->ff) - { - // Ring buffer - tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *)(uintptr_t) rx_fifo, bcnt); - } - else - { - // Linear buffer - read_fifo_packet(rhport, xfer->buffer, bcnt); - - // Increment pointer to xfer data - xfer->buffer += bcnt; - } - - // Truncate transfer length in case of short packet - if(bcnt < xfer->max_size) { - xfer->total_len -= (out_ep[epnum].DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DOEPTSIZ_XFRSIZ_Pos; - if(epnum == 0) { - xfer->total_len -= ep0_pending[TUSB_DIR_OUT]; - ep0_pending[TUSB_DIR_OUT] = 0; - } - } - } - break; - - case 0x03: // Out packet done (Interrupt) - break; - - case 0x04: // Setup packet done (Interrupt) - out_ep[epnum].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos); - break; - - case 0x06: // Setup packet recvd - // We can receive up to three setup packets in succession, but - // only the last one is valid. - _setup_packet[0] = (* rx_fifo); - _setup_packet[1] = (* rx_fifo); - break; - - default: // Invalid - TU_BREAKPOINT(); - break; - } -} - -static void handle_epout_ints(uint8_t rhport, USB_OTG_DeviceTypeDef * dev, USB_OTG_OUTEndpointTypeDef * out_ep) { - // DAINT for a given EP clears when DOEPINTx is cleared. - // OEPINT will be cleared when DAINT's out bits are cleared. - for(uint8_t n = 0; n < EP_MAX; n++) { - xfer_ctl_t * xfer = XFER_CTL_BASE(n, TUSB_DIR_OUT); - - if(dev->DAINT & (1 << (USB_OTG_DAINT_OEPINT_Pos + n))) { - // SETUP packet Setup Phase done. - if(out_ep[n].DOEPINT & USB_OTG_DOEPINT_STUP) { - out_ep[n].DOEPINT = USB_OTG_DOEPINT_STUP; - dcd_event_setup_received(rhport, (uint8_t*) &_setup_packet[0], true); - } - - // OUT XFER complete - if(out_ep[n].DOEPINT & USB_OTG_DOEPINT_XFRC) { - out_ep[n].DOEPINT = USB_OTG_DOEPINT_XFRC; - - // EP0 can only handle one packet - if((n == 0) && ep0_pending[TUSB_DIR_OUT]) { - // Schedule another packet to be received. - edpt_schedule_packets(rhport, n, TUSB_DIR_OUT, 1, ep0_pending[TUSB_DIR_OUT]); - } else { - dcd_event_xfer_complete(rhport, n, xfer->total_len, XFER_RESULT_SUCCESS, true); - } - } - } - } -} - -static void handle_epin_ints(uint8_t rhport, USB_OTG_DeviceTypeDef * dev, USB_OTG_INEndpointTypeDef * in_ep) { - // DAINT for a given EP clears when DIEPINTx is cleared. - // IEPINT will be cleared when DAINT's out bits are cleared. - for ( uint8_t n = 0; n < EP_MAX; n++ ) - { - xfer_ctl_t *xfer = XFER_CTL_BASE(n, TUSB_DIR_IN); - - if ( dev->DAINT & (1 << (USB_OTG_DAINT_IEPINT_Pos + n)) ) - { - // IN XFER complete (entire xfer). - if ( in_ep[n].DIEPINT & USB_OTG_DIEPINT_XFRC ) - { - in_ep[n].DIEPINT = USB_OTG_DIEPINT_XFRC; - - // EP0 can only handle one packet - if((n == 0) && ep0_pending[TUSB_DIR_IN]) { - // Schedule another packet to be transmitted. - edpt_schedule_packets(rhport, n, TUSB_DIR_IN, 1, ep0_pending[TUSB_DIR_IN]); - } else { - dcd_event_xfer_complete(rhport, n | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true); - } - } - - // XFER FIFO empty - if ( (in_ep[n].DIEPINT & USB_OTG_DIEPINT_TXFE) && (dev->DIEPEMPMSK & (1 << n)) ) - { - // DIEPINT's TXFE bit is read-only, software cannot clear it. - // It will only be cleared by hardware when written bytes is more than - // - 64 bytes or - // - Half of TX FIFO size (configured by DIEPTXF) - - uint16_t remaining_packets = (in_ep[n].DIEPTSIZ & USB_OTG_DIEPTSIZ_PKTCNT_Msk) >> USB_OTG_DIEPTSIZ_PKTCNT_Pos; - - // Process every single packet (only whole packets can be written to fifo) - for(uint16_t i = 0; i < remaining_packets; i++) - { - uint16_t const remaining_bytes = (in_ep[n].DIEPTSIZ & USB_OTG_DIEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DIEPTSIZ_XFRSIZ_Pos; - - // Packet can not be larger than ep max size - uint16_t const packet_size = tu_min16(remaining_bytes, xfer->max_size); - - // It's only possible to write full packets into FIFO. Therefore DTXFSTS register of current - // EP has to be checked if the buffer can take another WHOLE packet - if(packet_size > ((in_ep[n].DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV_Msk) << 2)) break; - - // Push packet to Tx-FIFO - if (xfer->ff) - { - usb_fifo_t tx_fifo = FIFO_BASE(rhport, n); - tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *)(uintptr_t) tx_fifo, packet_size); - } - else - { - write_fifo_packet(rhport, n, xfer->buffer, packet_size); - - // Increment pointer to xfer data - xfer->buffer += packet_size; - } - } - - // Turn off TXFE if all bytes are written. - if (((in_ep[n].DIEPTSIZ & USB_OTG_DIEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DIEPTSIZ_XFRSIZ_Pos) == 0) - { - dev->DIEPEMPMSK &= ~(1 << n); - } - } - } - } -} - -void dcd_int_handler(uint8_t rhport) -{ - USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport); - USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport); - USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport); - USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport); - - uint32_t const int_status = usb_otg->GINTSTS & usb_otg->GINTMSK; - - if(int_status & USB_OTG_GINTSTS_USBRST) - { - // USBRST is start of reset. - usb_otg->GINTSTS = USB_OTG_GINTSTS_USBRST; - bus_reset(rhport); - } - - if(int_status & USB_OTG_GINTSTS_ENUMDNE) - { - // ENUMDNE is the end of reset where speed of the link is detected - - usb_otg->GINTSTS = USB_OTG_GINTSTS_ENUMDNE; - - tusb_speed_t const speed = get_speed(rhport); - - set_turnaround(usb_otg, speed); - dcd_event_bus_reset(rhport, speed, true); - } - - if(int_status & USB_OTG_GINTSTS_USBSUSP) - { - usb_otg->GINTSTS = USB_OTG_GINTSTS_USBSUSP; - dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); - } - - if(int_status & USB_OTG_GINTSTS_WKUINT) - { - usb_otg->GINTSTS = USB_OTG_GINTSTS_WKUINT; - dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); - } - - // TODO check USB_OTG_GINTSTS_DISCINT for disconnect detection - // if(int_status & USB_OTG_GINTSTS_DISCINT) - - if(int_status & USB_OTG_GINTSTS_OTGINT) - { - // OTG INT bit is read-only - uint32_t const otg_int = usb_otg->GOTGINT; - - if (otg_int & USB_OTG_GOTGINT_SEDET) - { - dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true); - } - - usb_otg->GOTGINT = otg_int; - } - - if(int_status & USB_OTG_GINTSTS_SOF) - { - usb_otg->GINTSTS = USB_OTG_GINTSTS_SOF; - - // Disable SOF interrupt since currently only used for remote wakeup detection - usb_otg->GINTMSK &= ~USB_OTG_GINTMSK_SOFM; - - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); - } - - // RxFIFO non-empty interrupt handling. - if(int_status & USB_OTG_GINTSTS_RXFLVL) - { - // RXFLVL bit is read-only - - // Mask out RXFLVL while reading data from FIFO - usb_otg->GINTMSK &= ~USB_OTG_GINTMSK_RXFLVLM; - - // Loop until all available packets were handled - do - { - handle_rxflvl_ints(rhport, out_ep); - } while(usb_otg->GINTSTS & USB_OTG_GINTSTS_RXFLVL); - - // Manage RX FIFO size - if (_out_ep_closed) - { - update_grxfsiz(rhport); - - // Disable flag - _out_ep_closed = false; - } - - usb_otg->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } - - // OUT endpoint interrupt handling. - if(int_status & USB_OTG_GINTSTS_OEPINT) - { - // OEPINT is read-only - handle_epout_ints(rhport, dev, out_ep); - } - - // IN endpoint interrupt handling. - if(int_status & USB_OTG_GINTSTS_IEPINT) - { - // IEPINT bit read-only - handle_epin_ints(rhport, dev, in_ep); - } - - // // Check for Incomplete isochronous IN transfer - // if(int_status & USB_OTG_GINTSTS_IISOIXFR) { - // printf(" IISOIXFR!\r\n"); - //// TU_LOG2(" IISOIXFR!\r\n"); - // } -} - -#endif diff --git a/src/portable/st/synopsys/synopsys_common.h b/src/portable/st/synopsys/synopsys_common.h deleted file mode 100644 index ce3195b23..000000000 --- a/src/portable/st/synopsys/synopsys_common.h +++ /dev/null @@ -1,1465 +0,0 @@ -/** - ****************************************************************************** - * @file synopsys_common.h - * @author MCD Application Team - * @brief CMSIS Cortex-M3 Device USB OTG peripheral Header File. - * This file contains the USB OTG peripheral register's definitions, bits - * definitions and memory mapping for STM32F1xx devices. - * - * This file contains: - * - Data structures and the address mapping for the USB OTG peripheral - * - The Peripheral's registers declarations and bits definition - * - Macros to access the peripheral's registers hardware - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -#include "stdint.h" - -#pragma once - -#ifdef __cplusplus - #define __I volatile -#else - #define __I volatile const -#endif -#define __O volatile -#define __IO volatile -#define __IM volatile const -#define __OM volatile -#define __IOM volatile - -/** - * @brief __USB_OTG_Core_register - */ - -typedef struct -{ - __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset: 000h */ - __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset: 004h */ - __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset: 008h */ - __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset: 00Ch */ - __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset: 010h */ - __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset: 014h */ - __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset: 018h */ - __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset: 01Ch */ - __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset: 020h */ - __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register Address offset: 024h */ - __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset: 028h */ - __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset: 02Ch */ - uint32_t Reserved30[2]; /*!< Reserved 030h*/ - __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset: 038h */ - __IO uint32_t CID; /*!< User ID Register Address offset: 03Ch */ - uint32_t Reserved40[48]; /*!< Reserved 040h-0FFh */ - __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset: 100h */ - __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 0x104 */ -} USB_OTG_GlobalTypeDef; - -/** - * @brief __device_Registers - */ - -typedef struct -{ - __IO uint32_t DCFG; /*!< dev Configuration Register Address offset: 800h*/ - __IO uint32_t DCTL; /*!< dev Control Register Address offset: 804h*/ - __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset: 808h*/ - uint32_t Reserved0C; /*!< Reserved 80Ch*/ - __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset: 810h*/ - __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset: 814h*/ - __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset: 818h*/ - __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset: 81Ch*/ - uint32_t Reserved20; /*!< Reserved 820h*/ - uint32_t Reserved9; /*!< Reserved 824h*/ - __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset: 828h*/ - __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset: 82Ch*/ - __IO uint32_t DTHRCTL; /*!< dev thr Address offset: 830h*/ - __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset: 834h*/ - __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset: 838h*/ - __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ - uint32_t Reserved40; /*!< dedicated EP mask Address offset: 840h*/ - __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset: 844h*/ - uint32_t Reserved44[15]; /*!< Reserved 844-87Ch*/ - __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset: 884h*/ -} USB_OTG_DeviceTypeDef; - -/** - * @brief __IN_Endpoint-Specific_Register - */ - -typedef struct -{ - __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h*/ - __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ - __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ - __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ - uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ -} USB_OTG_INEndpointTypeDef; - -/** - * @brief __OUT_Endpoint-Specific_Registers - */ - -typedef struct -{ - __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h*/ - __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ - __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ - uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ -} USB_OTG_OUTEndpointTypeDef; - -/** - * @brief __Host_Mode_Register_Structures - */ - -typedef struct -{ - __IO uint32_t HCFG; /*!< Host Configuration Register 400h*/ - __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h*/ - __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h*/ - uint32_t Reserved40C; /*!< Reserved 40Ch*/ - __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h*/ - __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h*/ - __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h*/ -} USB_OTG_HostTypeDef; - -/** - * @brief __Host_Channel_Specific_Registers - */ - -typedef struct -{ - __IO uint32_t HCCHAR; - __IO uint32_t HCSPLT; - __IO uint32_t HCINT; - __IO uint32_t HCINTMSK; - __IO uint32_t HCTSIZ; - __IO uint32_t HCDMA; - uint32_t Reserved[2]; -} USB_OTG_HostChannelTypeDef; - -/*!< USB registers base address */ -#define USB_OTG_FS_PERIPH_BASE 0x50000000UL - -#define USB_OTG_GLOBAL_BASE 0x00000000UL -#define USB_OTG_DEVICE_BASE 0x00000800UL -#define USB_OTG_IN_ENDPOINT_BASE 0x00000900UL -#define USB_OTG_OUT_ENDPOINT_BASE 0x00000B00UL -#define USB_OTG_EP_REG_SIZE 0x00000020UL -#define USB_OTG_HOST_BASE 0x00000400UL -#define USB_OTG_HOST_PORT_BASE 0x00000440UL -#define USB_OTG_HOST_CHANNEL_BASE 0x00000500UL -#define USB_OTG_HOST_CHANNEL_SIZE 0x00000020UL -#define USB_OTG_PCGCCTL_BASE 0x00000E00UL -#define USB_OTG_FIFO_BASE 0x00001000UL -#define USB_OTG_FIFO_SIZE 0x00001000UL - -/******************************************************************************/ -/* */ -/* USB_OTG */ -/* */ -/******************************************************************************/ -/******************** Bit definition for USB_OTG_GOTGCTL register ***********/ -#define USB_OTG_GOTGCTL_SRQSCS_Pos (0U) -#define USB_OTG_GOTGCTL_SRQSCS_Msk (0x1UL << USB_OTG_GOTGCTL_SRQSCS_Pos) /*!< 0x00000001 */ -#define USB_OTG_GOTGCTL_SRQSCS USB_OTG_GOTGCTL_SRQSCS_Msk /*!< Session request success */ -#define USB_OTG_GOTGCTL_SRQ_Pos (1U) -#define USB_OTG_GOTGCTL_SRQ_Msk (0x1UL << USB_OTG_GOTGCTL_SRQ_Pos) /*!< 0x00000002 */ -#define USB_OTG_GOTGCTL_SRQ USB_OTG_GOTGCTL_SRQ_Msk /*!< Session request */ -#define USB_OTG_GOTGCTL_HNGSCS_Pos (8U) -#define USB_OTG_GOTGCTL_HNGSCS_Msk (0x1UL << USB_OTG_GOTGCTL_HNGSCS_Pos) /*!< 0x00000100 */ -#define USB_OTG_GOTGCTL_HNGSCS USB_OTG_GOTGCTL_HNGSCS_Msk /*!< Host set HNP enable */ -#define USB_OTG_GOTGCTL_HNPRQ_Pos (9U) -#define USB_OTG_GOTGCTL_HNPRQ_Msk (0x1UL << USB_OTG_GOTGCTL_HNPRQ_Pos) /*!< 0x00000200 */ -#define USB_OTG_GOTGCTL_HNPRQ USB_OTG_GOTGCTL_HNPRQ_Msk /*!< HNP request */ -#define USB_OTG_GOTGCTL_HSHNPEN_Pos (10U) -#define USB_OTG_GOTGCTL_HSHNPEN_Msk (0x1UL << USB_OTG_GOTGCTL_HSHNPEN_Pos) /*!< 0x00000400 */ -#define USB_OTG_GOTGCTL_HSHNPEN USB_OTG_GOTGCTL_HSHNPEN_Msk /*!< Host set HNP enable */ -#define USB_OTG_GOTGCTL_DHNPEN_Pos (11U) -#define USB_OTG_GOTGCTL_DHNPEN_Msk (0x1UL << USB_OTG_GOTGCTL_DHNPEN_Pos) /*!< 0x00000800 */ -#define USB_OTG_GOTGCTL_DHNPEN USB_OTG_GOTGCTL_DHNPEN_Msk /*!< Device HNP enabled */ -#define USB_OTG_GOTGCTL_CIDSTS_Pos (16U) -#define USB_OTG_GOTGCTL_CIDSTS_Msk (0x1UL << USB_OTG_GOTGCTL_CIDSTS_Pos) /*!< 0x00010000 */ -#define USB_OTG_GOTGCTL_CIDSTS USB_OTG_GOTGCTL_CIDSTS_Msk /*!< Connector ID status */ -#define USB_OTG_GOTGCTL_DBCT_Pos (17U) -#define USB_OTG_GOTGCTL_DBCT_Msk (0x1UL << USB_OTG_GOTGCTL_DBCT_Pos) /*!< 0x00020000 */ -#define USB_OTG_GOTGCTL_DBCT USB_OTG_GOTGCTL_DBCT_Msk /*!< Long/short debounce time */ -#define USB_OTG_GOTGCTL_ASVLD_Pos (18U) -#define USB_OTG_GOTGCTL_ASVLD_Msk (0x1UL << USB_OTG_GOTGCTL_ASVLD_Pos) /*!< 0x00040000 */ -#define USB_OTG_GOTGCTL_ASVLD USB_OTG_GOTGCTL_ASVLD_Msk /*!< A-session valid */ -#define USB_OTG_GOTGCTL_BSVLD_Pos (19U) -#define USB_OTG_GOTGCTL_BSVLD_Msk (0x1UL << USB_OTG_GOTGCTL_BSVLD_Pos) /*!< 0x00080000 */ -#define USB_OTG_GOTGCTL_BSVLD USB_OTG_GOTGCTL_BSVLD_Msk /*!< B-session valid */ - -/******************** Bit definition for USB_OTG_HCFG register ********************/ - -#define USB_OTG_HCFG_FSLSPCS_Pos (0U) -#define USB_OTG_HCFG_FSLSPCS_Msk (0x3UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000003 */ -#define USB_OTG_HCFG_FSLSPCS USB_OTG_HCFG_FSLSPCS_Msk /*!< FS/LS PHY clock select */ -#define USB_OTG_HCFG_FSLSPCS_0 (0x1UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000001 */ -#define USB_OTG_HCFG_FSLSPCS_1 (0x2UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000002 */ -#define USB_OTG_HCFG_FSLSS_Pos (2U) -#define USB_OTG_HCFG_FSLSS_Msk (0x1UL << USB_OTG_HCFG_FSLSS_Pos) /*!< 0x00000004 */ -#define USB_OTG_HCFG_FSLSS USB_OTG_HCFG_FSLSS_Msk /*!< FS- and LS-only support */ - -/******************** Bit definition for USB_OTG_DCFG register ********************/ - -#define USB_OTG_DCFG_DSPD_Pos (0U) -#define USB_OTG_DCFG_DSPD_Msk (0x3UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000003 */ -#define USB_OTG_DCFG_DSPD USB_OTG_DCFG_DSPD_Msk /*!< Device speed */ -#define USB_OTG_DCFG_DSPD_0 (0x1UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000001 */ -#define USB_OTG_DCFG_DSPD_1 (0x2UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000002 */ -#define USB_OTG_DCFG_NZLSOHSK_Pos (2U) -#define USB_OTG_DCFG_NZLSOHSK_Msk (0x1UL << USB_OTG_DCFG_NZLSOHSK_Pos) /*!< 0x00000004 */ -#define USB_OTG_DCFG_NZLSOHSK USB_OTG_DCFG_NZLSOHSK_Msk /*!< Nonzero-length status OUT handshake */ - -#define USB_OTG_DCFG_DAD_Pos (4U) -#define USB_OTG_DCFG_DAD_Msk (0x7FUL << USB_OTG_DCFG_DAD_Pos) /*!< 0x000007F0 */ -#define USB_OTG_DCFG_DAD USB_OTG_DCFG_DAD_Msk /*!< Device address */ -#define USB_OTG_DCFG_DAD_0 (0x01UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000010 */ -#define USB_OTG_DCFG_DAD_1 (0x02UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000020 */ -#define USB_OTG_DCFG_DAD_2 (0x04UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000040 */ -#define USB_OTG_DCFG_DAD_3 (0x08UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000080 */ -#define USB_OTG_DCFG_DAD_4 (0x10UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000100 */ -#define USB_OTG_DCFG_DAD_5 (0x20UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000200 */ -#define USB_OTG_DCFG_DAD_6 (0x40UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000400 */ - -#define USB_OTG_DCFG_PFIVL_Pos (11U) -#define USB_OTG_DCFG_PFIVL_Msk (0x3UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001800 */ -#define USB_OTG_DCFG_PFIVL USB_OTG_DCFG_PFIVL_Msk /*!< Periodic (micro)frame interval */ -#define USB_OTG_DCFG_PFIVL_0 (0x1UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00000800 */ -#define USB_OTG_DCFG_PFIVL_1 (0x2UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001000 */ - -#define USB_OTG_DCFG_PERSCHIVL_Pos (24U) -#define USB_OTG_DCFG_PERSCHIVL_Msk (0x3UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x03000000 */ -#define USB_OTG_DCFG_PERSCHIVL USB_OTG_DCFG_PERSCHIVL_Msk /*!< Periodic scheduling interval */ -#define USB_OTG_DCFG_PERSCHIVL_0 (0x1UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x01000000 */ -#define USB_OTG_DCFG_PERSCHIVL_1 (0x2UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x02000000 */ - -/******************** Bit definition for USB_OTG_PCGCR register ********************/ -#define USB_OTG_PCGCR_STPPCLK_Pos (0U) -#define USB_OTG_PCGCR_STPPCLK_Msk (0x1UL << USB_OTG_PCGCR_STPPCLK_Pos) /*!< 0x00000001 */ -#define USB_OTG_PCGCR_STPPCLK USB_OTG_PCGCR_STPPCLK_Msk /*!< Stop PHY clock */ -#define USB_OTG_PCGCR_GATEHCLK_Pos (1U) -#define USB_OTG_PCGCR_GATEHCLK_Msk (0x1UL << USB_OTG_PCGCR_GATEHCLK_Pos) /*!< 0x00000002 */ -#define USB_OTG_PCGCR_GATEHCLK USB_OTG_PCGCR_GATEHCLK_Msk /*!< Gate HCLK */ -#define USB_OTG_PCGCR_PHYSUSP_Pos (4U) -#define USB_OTG_PCGCR_PHYSUSP_Msk (0x1UL << USB_OTG_PCGCR_PHYSUSP_Pos) /*!< 0x00000010 */ -#define USB_OTG_PCGCR_PHYSUSP USB_OTG_PCGCR_PHYSUSP_Msk /*!< PHY suspended */ - -/******************** Bit definition for USB_OTG_GOTGINT register ********************/ -#define USB_OTG_GOTGINT_SEDET_Pos (2U) -#define USB_OTG_GOTGINT_SEDET_Msk (0x1UL << USB_OTG_GOTGINT_SEDET_Pos) /*!< 0x00000004 */ -#define USB_OTG_GOTGINT_SEDET USB_OTG_GOTGINT_SEDET_Msk /*!< Session end detected */ -#define USB_OTG_GOTGINT_SRSSCHG_Pos (8U) -#define USB_OTG_GOTGINT_SRSSCHG_Msk (0x1UL << USB_OTG_GOTGINT_SRSSCHG_Pos) /*!< 0x00000100 */ -#define USB_OTG_GOTGINT_SRSSCHG USB_OTG_GOTGINT_SRSSCHG_Msk /*!< Session request success status change */ -#define USB_OTG_GOTGINT_HNSSCHG_Pos (9U) -#define USB_OTG_GOTGINT_HNSSCHG_Msk (0x1UL << USB_OTG_GOTGINT_HNSSCHG_Pos) /*!< 0x00000200 */ -#define USB_OTG_GOTGINT_HNSSCHG USB_OTG_GOTGINT_HNSSCHG_Msk /*!< Host negotiation success status change */ -#define USB_OTG_GOTGINT_HNGDET_Pos (17U) -#define USB_OTG_GOTGINT_HNGDET_Msk (0x1UL << USB_OTG_GOTGINT_HNGDET_Pos) /*!< 0x00020000 */ -#define USB_OTG_GOTGINT_HNGDET USB_OTG_GOTGINT_HNGDET_Msk /*!< Host negotiation detected */ -#define USB_OTG_GOTGINT_ADTOCHG_Pos (18U) -#define USB_OTG_GOTGINT_ADTOCHG_Msk (0x1UL << USB_OTG_GOTGINT_ADTOCHG_Pos) /*!< 0x00040000 */ -#define USB_OTG_GOTGINT_ADTOCHG USB_OTG_GOTGINT_ADTOCHG_Msk /*!< A-device timeout change */ -#define USB_OTG_GOTGINT_DBCDNE_Pos (19U) -#define USB_OTG_GOTGINT_DBCDNE_Msk (0x1UL << USB_OTG_GOTGINT_DBCDNE_Pos) /*!< 0x00080000 */ -#define USB_OTG_GOTGINT_DBCDNE USB_OTG_GOTGINT_DBCDNE_Msk /*!< Debounce done */ - -/******************** Bit definition for USB_OTG_DCTL register ********************/ -#define USB_OTG_DCTL_RWUSIG_Pos (0U) -#define USB_OTG_DCTL_RWUSIG_Msk (0x1UL << USB_OTG_DCTL_RWUSIG_Pos) /*!< 0x00000001 */ -#define USB_OTG_DCTL_RWUSIG USB_OTG_DCTL_RWUSIG_Msk /*!< Remote wakeup signaling */ -#define USB_OTG_DCTL_SDIS_Pos (1U) -#define USB_OTG_DCTL_SDIS_Msk (0x1UL << USB_OTG_DCTL_SDIS_Pos) /*!< 0x00000002 */ -#define USB_OTG_DCTL_SDIS USB_OTG_DCTL_SDIS_Msk /*!< Soft disconnect */ -#define USB_OTG_DCTL_GINSTS_Pos (2U) -#define USB_OTG_DCTL_GINSTS_Msk (0x1UL << USB_OTG_DCTL_GINSTS_Pos) /*!< 0x00000004 */ -#define USB_OTG_DCTL_GINSTS USB_OTG_DCTL_GINSTS_Msk /*!< Global IN NAK status */ -#define USB_OTG_DCTL_GONSTS_Pos (3U) -#define USB_OTG_DCTL_GONSTS_Msk (0x1UL << USB_OTG_DCTL_GONSTS_Pos) /*!< 0x00000008 */ -#define USB_OTG_DCTL_GONSTS USB_OTG_DCTL_GONSTS_Msk /*!< Global OUT NAK status */ - -#define USB_OTG_DCTL_TCTL_Pos (4U) -#define USB_OTG_DCTL_TCTL_Msk (0x7UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000070 */ -#define USB_OTG_DCTL_TCTL USB_OTG_DCTL_TCTL_Msk /*!< Test control */ -#define USB_OTG_DCTL_TCTL_0 (0x1UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000010 */ -#define USB_OTG_DCTL_TCTL_1 (0x2UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000020 */ -#define USB_OTG_DCTL_TCTL_2 (0x4UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000040 */ -#define USB_OTG_DCTL_SGINAK_Pos (7U) -#define USB_OTG_DCTL_SGINAK_Msk (0x1UL << USB_OTG_DCTL_SGINAK_Pos) /*!< 0x00000080 */ -#define USB_OTG_DCTL_SGINAK USB_OTG_DCTL_SGINAK_Msk /*!< Set global IN NAK */ -#define USB_OTG_DCTL_CGINAK_Pos (8U) -#define USB_OTG_DCTL_CGINAK_Msk (0x1UL << USB_OTG_DCTL_CGINAK_Pos) /*!< 0x00000100 */ -#define USB_OTG_DCTL_CGINAK USB_OTG_DCTL_CGINAK_Msk /*!< Clear global IN NAK */ -#define USB_OTG_DCTL_SGONAK_Pos (9U) -#define USB_OTG_DCTL_SGONAK_Msk (0x1UL << USB_OTG_DCTL_SGONAK_Pos) /*!< 0x00000200 */ -#define USB_OTG_DCTL_SGONAK USB_OTG_DCTL_SGONAK_Msk /*!< Set global OUT NAK */ -#define USB_OTG_DCTL_CGONAK_Pos (10U) -#define USB_OTG_DCTL_CGONAK_Msk (0x1UL << USB_OTG_DCTL_CGONAK_Pos) /*!< 0x00000400 */ -#define USB_OTG_DCTL_CGONAK USB_OTG_DCTL_CGONAK_Msk /*!< Clear global OUT NAK */ -#define USB_OTG_DCTL_POPRGDNE_Pos (11U) -#define USB_OTG_DCTL_POPRGDNE_Msk (0x1UL << USB_OTG_DCTL_POPRGDNE_Pos) /*!< 0x00000800 */ -#define USB_OTG_DCTL_POPRGDNE USB_OTG_DCTL_POPRGDNE_Msk /*!< Power-on programming done */ - -/******************** Bit definition for USB_OTG_HFIR register ********************/ -#define USB_OTG_HFIR_FRIVL_Pos (0U) -#define USB_OTG_HFIR_FRIVL_Msk (0xFFFFUL << USB_OTG_HFIR_FRIVL_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_HFIR_FRIVL USB_OTG_HFIR_FRIVL_Msk /*!< Frame interval */ - -/******************** Bit definition for USB_OTG_HFNUM register ********************/ -#define USB_OTG_HFNUM_FRNUM_Pos (0U) -#define USB_OTG_HFNUM_FRNUM_Msk (0xFFFFUL << USB_OTG_HFNUM_FRNUM_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_HFNUM_FRNUM USB_OTG_HFNUM_FRNUM_Msk /*!< Frame number */ -#define USB_OTG_HFNUM_FTREM_Pos (16U) -#define USB_OTG_HFNUM_FTREM_Msk (0xFFFFUL << USB_OTG_HFNUM_FTREM_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_HFNUM_FTREM USB_OTG_HFNUM_FTREM_Msk /*!< Frame time remaining */ - -/******************** Bit definition for USB_OTG_DSTS register ********************/ -#define USB_OTG_DSTS_SUSPSTS_Pos (0U) -#define USB_OTG_DSTS_SUSPSTS_Msk (0x1UL << USB_OTG_DSTS_SUSPSTS_Pos) /*!< 0x00000001 */ -#define USB_OTG_DSTS_SUSPSTS USB_OTG_DSTS_SUSPSTS_Msk /*!< Suspend status */ - -#define USB_OTG_DSTS_ENUMSPD_Pos (1U) -#define USB_OTG_DSTS_ENUMSPD_Msk (0x3UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000006 */ -#define USB_OTG_DSTS_ENUMSPD USB_OTG_DSTS_ENUMSPD_Msk /*!< Enumerated speed */ -#define USB_OTG_DSTS_ENUMSPD_0 (0x1UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000002 */ -#define USB_OTG_DSTS_ENUMSPD_1 (0x2UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000004 */ -#define USB_OTG_DSTS_EERR_Pos (3U) -#define USB_OTG_DSTS_EERR_Msk (0x1UL << USB_OTG_DSTS_EERR_Pos) /*!< 0x00000008 */ -#define USB_OTG_DSTS_EERR USB_OTG_DSTS_EERR_Msk /*!< Erratic error */ -#define USB_OTG_DSTS_FNSOF_Pos (8U) -#define USB_OTG_DSTS_FNSOF_Msk (0x3FFFUL << USB_OTG_DSTS_FNSOF_Pos) /*!< 0x003FFF00 */ -#define USB_OTG_DSTS_FNSOF USB_OTG_DSTS_FNSOF_Msk /*!< Frame number of the received SOF */ - -/******************** Bit definition for USB_OTG_GAHBCFG register ********************/ -#define USB_OTG_GAHBCFG_GINT_Pos (0U) -#define USB_OTG_GAHBCFG_GINT_Msk (0x1UL << USB_OTG_GAHBCFG_GINT_Pos) /*!< 0x00000001 */ -#define USB_OTG_GAHBCFG_GINT USB_OTG_GAHBCFG_GINT_Msk /*!< Global interrupt mask */ -#define USB_OTG_GAHBCFG_HBSTLEN_Pos (1U) -#define USB_OTG_GAHBCFG_HBSTLEN_Msk (0xFUL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< 0x0000001E */ -#define USB_OTG_GAHBCFG_HBSTLEN USB_OTG_GAHBCFG_HBSTLEN_Msk /*!< Burst length/type */ -#define USB_OTG_GAHBCFG_HBSTLEN_0 (0x0UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< Single */ -#define USB_OTG_GAHBCFG_HBSTLEN_1 (0x1UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR */ -#define USB_OTG_GAHBCFG_HBSTLEN_2 (0x3UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR4 */ -#define USB_OTG_GAHBCFG_HBSTLEN_3 (0x5UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR8 */ -#define USB_OTG_GAHBCFG_HBSTLEN_4 (0x7UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR16 */ -#define USB_OTG_GAHBCFG_DMAEN_Pos (5U) -#define USB_OTG_GAHBCFG_DMAEN_Msk (0x1UL << USB_OTG_GAHBCFG_DMAEN_Pos) /*!< 0x00000020 */ -#define USB_OTG_GAHBCFG_DMAEN USB_OTG_GAHBCFG_DMAEN_Msk /*!< DMA enable */ -#define USB_OTG_GAHBCFG_TXFELVL_Pos (7U) -#define USB_OTG_GAHBCFG_TXFELVL_Msk (0x1UL << USB_OTG_GAHBCFG_TXFELVL_Pos) /*!< 0x00000080 */ -#define USB_OTG_GAHBCFG_TXFELVL USB_OTG_GAHBCFG_TXFELVL_Msk /*!< TxFIFO empty level */ -#define USB_OTG_GAHBCFG_PTXFELVL_Pos (8U) -#define USB_OTG_GAHBCFG_PTXFELVL_Msk (0x1UL << USB_OTG_GAHBCFG_PTXFELVL_Pos) /*!< 0x00000100 */ -#define USB_OTG_GAHBCFG_PTXFELVL USB_OTG_GAHBCFG_PTXFELVL_Msk /*!< Periodic TxFIFO empty level */ - -/******************** Bit definition for USB_OTG_GUSBCFG register ********************/ - -#define USB_OTG_GUSBCFG_TOCAL_Pos (0U) -#define USB_OTG_GUSBCFG_TOCAL_Msk (0x7UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000007 */ -#define USB_OTG_GUSBCFG_TOCAL USB_OTG_GUSBCFG_TOCAL_Msk /*!< FS timeout calibration */ -#define USB_OTG_GUSBCFG_TOCAL_0 (0x1UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000001 */ -#define USB_OTG_GUSBCFG_TOCAL_1 (0x2UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000002 */ -#define USB_OTG_GUSBCFG_TOCAL_2 (0x4UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000004 */ -#define USB_OTG_GUSBCFG_PHYSEL_Pos (6U) -#define USB_OTG_GUSBCFG_PHYSEL_Msk (0x1UL << USB_OTG_GUSBCFG_PHYSEL_Pos) /*!< 0x00000040 */ -#define USB_OTG_GUSBCFG_PHYSEL USB_OTG_GUSBCFG_PHYSEL_Msk /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */ -#define USB_OTG_GUSBCFG_SRPCAP_Pos (8U) -#define USB_OTG_GUSBCFG_SRPCAP_Msk (0x1UL << USB_OTG_GUSBCFG_SRPCAP_Pos) /*!< 0x00000100 */ -#define USB_OTG_GUSBCFG_SRPCAP USB_OTG_GUSBCFG_SRPCAP_Msk /*!< SRP-capable */ -#define USB_OTG_GUSBCFG_HNPCAP_Pos (9U) -#define USB_OTG_GUSBCFG_HNPCAP_Msk (0x1UL << USB_OTG_GUSBCFG_HNPCAP_Pos) /*!< 0x00000200 */ -#define USB_OTG_GUSBCFG_HNPCAP USB_OTG_GUSBCFG_HNPCAP_Msk /*!< HNP-capable */ -#define USB_OTG_GUSBCFG_TRDT_Pos (10U) -#define USB_OTG_GUSBCFG_TRDT_Msk (0xFUL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00003C00 */ -#define USB_OTG_GUSBCFG_TRDT USB_OTG_GUSBCFG_TRDT_Msk /*!< USB turnaround time */ -#define USB_OTG_GUSBCFG_TRDT_0 (0x1UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000400 */ -#define USB_OTG_GUSBCFG_TRDT_1 (0x2UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000800 */ -#define USB_OTG_GUSBCFG_TRDT_2 (0x4UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00001000 */ -#define USB_OTG_GUSBCFG_TRDT_3 (0x8UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00002000 */ -#define USB_OTG_GUSBCFG_PHYLPCS_Pos (15U) -#define USB_OTG_GUSBCFG_PHYLPCS_Msk (0x1UL << USB_OTG_GUSBCFG_PHYLPCS_Pos) /*!< 0x00008000 */ -#define USB_OTG_GUSBCFG_PHYLPCS USB_OTG_GUSBCFG_PHYLPCS_Msk /*!< PHY Low-power clock select */ -#define USB_OTG_GUSBCFG_ULPIFSLS_Pos (17U) -#define USB_OTG_GUSBCFG_ULPIFSLS_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIFSLS_Pos) /*!< 0x00020000 */ -#define USB_OTG_GUSBCFG_ULPIFSLS USB_OTG_GUSBCFG_ULPIFSLS_Msk /*!< ULPI FS/LS select */ -#define USB_OTG_GUSBCFG_ULPIAR_Pos (18U) -#define USB_OTG_GUSBCFG_ULPIAR_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIAR_Pos) /*!< 0x00040000 */ -#define USB_OTG_GUSBCFG_ULPIAR USB_OTG_GUSBCFG_ULPIAR_Msk /*!< ULPI Auto-resume */ -#define USB_OTG_GUSBCFG_ULPICSM_Pos (19U) -#define USB_OTG_GUSBCFG_ULPICSM_Msk (0x1UL << USB_OTG_GUSBCFG_ULPICSM_Pos) /*!< 0x00080000 */ -#define USB_OTG_GUSBCFG_ULPICSM USB_OTG_GUSBCFG_ULPICSM_Msk /*!< ULPI Clock SuspendM */ -#define USB_OTG_GUSBCFG_ULPIEVBUSD_Pos (20U) -#define USB_OTG_GUSBCFG_ULPIEVBUSD_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSD_Pos) /*!< 0x00100000 */ -#define USB_OTG_GUSBCFG_ULPIEVBUSD USB_OTG_GUSBCFG_ULPIEVBUSD_Msk /*!< ULPI External VBUS Drive */ -#define USB_OTG_GUSBCFG_ULPIEVBUSI_Pos (21U) -#define USB_OTG_GUSBCFG_ULPIEVBUSI_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSI_Pos) /*!< 0x00200000 */ -#define USB_OTG_GUSBCFG_ULPIEVBUSI USB_OTG_GUSBCFG_ULPIEVBUSI_Msk /*!< ULPI external VBUS indicator */ -#define USB_OTG_GUSBCFG_TSDPS_Pos (22U) -#define USB_OTG_GUSBCFG_TSDPS_Msk (0x1UL << USB_OTG_GUSBCFG_TSDPS_Pos) /*!< 0x00400000 */ -#define USB_OTG_GUSBCFG_TSDPS USB_OTG_GUSBCFG_TSDPS_Msk /*!< TermSel DLine pulsing selection */ -#define USB_OTG_GUSBCFG_PCCI_Pos (23U) -#define USB_OTG_GUSBCFG_PCCI_Msk (0x1UL << USB_OTG_GUSBCFG_PCCI_Pos) /*!< 0x00800000 */ -#define USB_OTG_GUSBCFG_PCCI USB_OTG_GUSBCFG_PCCI_Msk /*!< Indicator complement */ -#define USB_OTG_GUSBCFG_PTCI_Pos (24U) -#define USB_OTG_GUSBCFG_PTCI_Msk (0x1UL << USB_OTG_GUSBCFG_PTCI_Pos) /*!< 0x01000000 */ -#define USB_OTG_GUSBCFG_PTCI USB_OTG_GUSBCFG_PTCI_Msk /*!< Indicator pass through */ -#define USB_OTG_GUSBCFG_ULPIIPD_Pos (25U) -#define USB_OTG_GUSBCFG_ULPIIPD_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIIPD_Pos) /*!< 0x02000000 */ -#define USB_OTG_GUSBCFG_ULPIIPD USB_OTG_GUSBCFG_ULPIIPD_Msk /*!< ULPI interface protect disable */ -#define USB_OTG_GUSBCFG_FHMOD_Pos (29U) -#define USB_OTG_GUSBCFG_FHMOD_Msk (0x1UL << USB_OTG_GUSBCFG_FHMOD_Pos) /*!< 0x20000000 */ -#define USB_OTG_GUSBCFG_FHMOD USB_OTG_GUSBCFG_FHMOD_Msk /*!< Forced host mode */ -#define USB_OTG_GUSBCFG_FDMOD_Pos (30U) -#define USB_OTG_GUSBCFG_FDMOD_Msk (0x1UL << USB_OTG_GUSBCFG_FDMOD_Pos) /*!< 0x40000000 */ -#define USB_OTG_GUSBCFG_FDMOD USB_OTG_GUSBCFG_FDMOD_Msk /*!< Forced peripheral mode */ -#define USB_OTG_GUSBCFG_CTXPKT_Pos (31U) -#define USB_OTG_GUSBCFG_CTXPKT_Msk (0x1UL << USB_OTG_GUSBCFG_CTXPKT_Pos) /*!< 0x80000000 */ -#define USB_OTG_GUSBCFG_CTXPKT USB_OTG_GUSBCFG_CTXPKT_Msk /*!< Corrupt Tx packet */ - -/******************** Bit definition for USB_OTG_GRSTCTL register ********************/ -#define USB_OTG_GRSTCTL_CSRST_Pos (0U) -#define USB_OTG_GRSTCTL_CSRST_Msk (0x1UL << USB_OTG_GRSTCTL_CSRST_Pos) /*!< 0x00000001 */ -#define USB_OTG_GRSTCTL_CSRST USB_OTG_GRSTCTL_CSRST_Msk /*!< Core soft reset */ -#define USB_OTG_GRSTCTL_HSRST_Pos (1U) -#define USB_OTG_GRSTCTL_HSRST_Msk (0x1UL << USB_OTG_GRSTCTL_HSRST_Pos) /*!< 0x00000002 */ -#define USB_OTG_GRSTCTL_HSRST USB_OTG_GRSTCTL_HSRST_Msk /*!< HCLK soft reset */ -#define USB_OTG_GRSTCTL_FCRST_Pos (2U) -#define USB_OTG_GRSTCTL_FCRST_Msk (0x1UL << USB_OTG_GRSTCTL_FCRST_Pos) /*!< 0x00000004 */ -#define USB_OTG_GRSTCTL_FCRST USB_OTG_GRSTCTL_FCRST_Msk /*!< Host frame counter reset */ -#define USB_OTG_GRSTCTL_RXFFLSH_Pos (4U) -#define USB_OTG_GRSTCTL_RXFFLSH_Msk (0x1UL << USB_OTG_GRSTCTL_RXFFLSH_Pos) /*!< 0x00000010 */ -#define USB_OTG_GRSTCTL_RXFFLSH USB_OTG_GRSTCTL_RXFFLSH_Msk /*!< RxFIFO flush */ -#define USB_OTG_GRSTCTL_TXFFLSH_Pos (5U) -#define USB_OTG_GRSTCTL_TXFFLSH_Msk (0x1UL << USB_OTG_GRSTCTL_TXFFLSH_Pos) /*!< 0x00000020 */ -#define USB_OTG_GRSTCTL_TXFFLSH USB_OTG_GRSTCTL_TXFFLSH_Msk /*!< TxFIFO flush */ - - -#define USB_OTG_GRSTCTL_TXFNUM_Pos (6U) -#define USB_OTG_GRSTCTL_TXFNUM_Msk (0x1FUL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x000007C0 */ -#define USB_OTG_GRSTCTL_TXFNUM USB_OTG_GRSTCTL_TXFNUM_Msk /*!< TxFIFO number */ -#define USB_OTG_GRSTCTL_TXFNUM_0 (0x01UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000040 */ -#define USB_OTG_GRSTCTL_TXFNUM_1 (0x02UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000080 */ -#define USB_OTG_GRSTCTL_TXFNUM_2 (0x04UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000100 */ -#define USB_OTG_GRSTCTL_TXFNUM_3 (0x08UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000200 */ -#define USB_OTG_GRSTCTL_TXFNUM_4 (0x10UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000400 */ -#define USB_OTG_GRSTCTL_DMAREQ_Pos (30U) -#define USB_OTG_GRSTCTL_DMAREQ_Msk (0x1UL << USB_OTG_GRSTCTL_DMAREQ_Pos) /*!< 0x40000000 */ -#define USB_OTG_GRSTCTL_DMAREQ USB_OTG_GRSTCTL_DMAREQ_Msk /*!< DMA request signal */ -#define USB_OTG_GRSTCTL_AHBIDL_Pos (31U) -#define USB_OTG_GRSTCTL_AHBIDL_Msk (0x1UL << USB_OTG_GRSTCTL_AHBIDL_Pos) /*!< 0x80000000 */ -#define USB_OTG_GRSTCTL_AHBIDL USB_OTG_GRSTCTL_AHBIDL_Msk /*!< AHB master idle */ - -/******************** Bit definition for USB_OTG_DIEPMSK register ********************/ -#define USB_OTG_DIEPMSK_XFRCM_Pos (0U) -#define USB_OTG_DIEPMSK_XFRCM_Msk (0x1UL << USB_OTG_DIEPMSK_XFRCM_Pos) /*!< 0x00000001 */ -#define USB_OTG_DIEPMSK_XFRCM USB_OTG_DIEPMSK_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DIEPMSK_EPDM_Pos (1U) -#define USB_OTG_DIEPMSK_EPDM_Msk (0x1UL << USB_OTG_DIEPMSK_EPDM_Pos) /*!< 0x00000002 */ -#define USB_OTG_DIEPMSK_EPDM USB_OTG_DIEPMSK_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DIEPMSK_TOM_Pos (3U) -#define USB_OTG_DIEPMSK_TOM_Msk (0x1UL << USB_OTG_DIEPMSK_TOM_Pos) /*!< 0x00000008 */ -#define USB_OTG_DIEPMSK_TOM USB_OTG_DIEPMSK_TOM_Msk /*!< Timeout condition mask (nonisochronous endpoints) */ -#define USB_OTG_DIEPMSK_ITTXFEMSK_Pos (4U) -#define USB_OTG_DIEPMSK_ITTXFEMSK_Msk (0x1UL << USB_OTG_DIEPMSK_ITTXFEMSK_Pos) /*!< 0x00000010 */ -#define USB_OTG_DIEPMSK_ITTXFEMSK USB_OTG_DIEPMSK_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DIEPMSK_INEPNMM_Pos (5U) -#define USB_OTG_DIEPMSK_INEPNMM_Msk (0x1UL << USB_OTG_DIEPMSK_INEPNMM_Pos) /*!< 0x00000020 */ -#define USB_OTG_DIEPMSK_INEPNMM USB_OTG_DIEPMSK_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DIEPMSK_INEPNEM_Pos (6U) -#define USB_OTG_DIEPMSK_INEPNEM_Msk (0x1UL << USB_OTG_DIEPMSK_INEPNEM_Pos) /*!< 0x00000040 */ -#define USB_OTG_DIEPMSK_INEPNEM USB_OTG_DIEPMSK_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DIEPMSK_TXFURM_Pos (8U) -#define USB_OTG_DIEPMSK_TXFURM_Msk (0x1UL << USB_OTG_DIEPMSK_TXFURM_Pos) /*!< 0x00000100 */ -#define USB_OTG_DIEPMSK_TXFURM USB_OTG_DIEPMSK_TXFURM_Msk /*!< FIFO underrun mask */ -#define USB_OTG_DIEPMSK_BIM_Pos (9U) -#define USB_OTG_DIEPMSK_BIM_Msk (0x1UL << USB_OTG_DIEPMSK_BIM_Pos) /*!< 0x00000200 */ -#define USB_OTG_DIEPMSK_BIM USB_OTG_DIEPMSK_BIM_Msk /*!< BNA interrupt mask */ - -/******************** Bit definition for USB_OTG_HPTXSTS register ********************/ -#define USB_OTG_HPTXSTS_PTXFSAVL_Pos (0U) -#define USB_OTG_HPTXSTS_PTXFSAVL_Msk (0xFFFFUL << USB_OTG_HPTXSTS_PTXFSAVL_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_HPTXSTS_PTXFSAVL USB_OTG_HPTXSTS_PTXFSAVL_Msk /*!< Periodic transmit data FIFO space available */ -#define USB_OTG_HPTXSTS_PTXQSAV_Pos (16U) -#define USB_OTG_HPTXSTS_PTXQSAV_Msk (0xFFUL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00FF0000 */ -#define USB_OTG_HPTXSTS_PTXQSAV USB_OTG_HPTXSTS_PTXQSAV_Msk /*!< Periodic transmit request queue space available */ -#define USB_OTG_HPTXSTS_PTXQSAV_0 (0x01UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00010000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_1 (0x02UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00020000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_2 (0x04UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00040000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_3 (0x08UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00080000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_4 (0x10UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00100000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_5 (0x20UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00200000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_6 (0x40UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00400000 */ -#define USB_OTG_HPTXSTS_PTXQSAV_7 (0x80UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00800000 */ - -#define USB_OTG_HPTXSTS_PTXQTOP_Pos (24U) -#define USB_OTG_HPTXSTS_PTXQTOP_Msk (0xFFUL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0xFF000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP USB_OTG_HPTXSTS_PTXQTOP_Msk /*!< Top of the periodic transmit request queue */ -#define USB_OTG_HPTXSTS_PTXQTOP_0 (0x01UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x01000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_1 (0x02UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x02000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_2 (0x04UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x04000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_3 (0x08UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x08000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_4 (0x10UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x10000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_5 (0x20UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x20000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_6 (0x40UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x40000000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_7 (0x80UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x80000000 */ - -/******************** Bit definition for USB_OTG_HAINT register ********************/ -#define USB_OTG_HAINT_HAINT_Pos (0U) -#define USB_OTG_HAINT_HAINT_Msk (0xFFFFUL << USB_OTG_HAINT_HAINT_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_HAINT_HAINT USB_OTG_HAINT_HAINT_Msk /*!< Channel interrupts */ - -/******************** Bit definition for USB_OTG_DOEPMSK register ********************/ -#define USB_OTG_DOEPMSK_XFRCM_Pos (0U) -#define USB_OTG_DOEPMSK_XFRCM_Msk (0x1UL << USB_OTG_DOEPMSK_XFRCM_Pos) /*!< 0x00000001 */ -#define USB_OTG_DOEPMSK_XFRCM USB_OTG_DOEPMSK_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DOEPMSK_EPDM_Pos (1U) -#define USB_OTG_DOEPMSK_EPDM_Msk (0x1UL << USB_OTG_DOEPMSK_EPDM_Pos) /*!< 0x00000002 */ -#define USB_OTG_DOEPMSK_EPDM USB_OTG_DOEPMSK_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DOEPMSK_AHBERRM_Pos (2U) -#define USB_OTG_DOEPMSK_AHBERRM_Msk (0x1UL << USB_OTG_DOEPMSK_AHBERRM_Pos) /*!< 0x00000004 */ -#define USB_OTG_DOEPMSK_AHBERRM USB_OTG_DOEPMSK_AHBERRM_Msk /*!< OUT transaction AHB Error interrupt mask */ -#define USB_OTG_DOEPMSK_STUPM_Pos (3U) -#define USB_OTG_DOEPMSK_STUPM_Msk (0x1UL << USB_OTG_DOEPMSK_STUPM_Pos) /*!< 0x00000008 */ -#define USB_OTG_DOEPMSK_STUPM USB_OTG_DOEPMSK_STUPM_Msk /*!< SETUP phase done mask */ -#define USB_OTG_DOEPMSK_OTEPDM_Pos (4U) -#define USB_OTG_DOEPMSK_OTEPDM_Msk (0x1UL << USB_OTG_DOEPMSK_OTEPDM_Pos) /*!< 0x00000010 */ -#define USB_OTG_DOEPMSK_OTEPDM USB_OTG_DOEPMSK_OTEPDM_Msk /*!< OUT token received when endpoint disabled mask */ -#define USB_OTG_DOEPMSK_OTEPSPRM_Pos (5U) -#define USB_OTG_DOEPMSK_OTEPSPRM_Msk (0x1UL << USB_OTG_DOEPMSK_OTEPSPRM_Pos) /*!< 0x00000020 */ -#define USB_OTG_DOEPMSK_OTEPSPRM USB_OTG_DOEPMSK_OTEPSPRM_Msk /*!< Status Phase Received mask */ -#define USB_OTG_DOEPMSK_B2BSTUP_Pos (6U) -#define USB_OTG_DOEPMSK_B2BSTUP_Msk (0x1UL << USB_OTG_DOEPMSK_B2BSTUP_Pos) /*!< 0x00000040 */ -#define USB_OTG_DOEPMSK_B2BSTUP USB_OTG_DOEPMSK_B2BSTUP_Msk /*!< Back-to-back SETUP packets received mask */ -#define USB_OTG_DOEPMSK_OPEM_Pos (8U) -#define USB_OTG_DOEPMSK_OPEM_Msk (0x1UL << USB_OTG_DOEPMSK_OPEM_Pos) /*!< 0x00000100 */ -#define USB_OTG_DOEPMSK_OPEM USB_OTG_DOEPMSK_OPEM_Msk /*!< OUT packet error mask */ -#define USB_OTG_DOEPMSK_BOIM_Pos (9U) -#define USB_OTG_DOEPMSK_BOIM_Msk (0x1UL << USB_OTG_DOEPMSK_BOIM_Pos) /*!< 0x00000200 */ -#define USB_OTG_DOEPMSK_BOIM USB_OTG_DOEPMSK_BOIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DOEPMSK_BERRM_Pos (12U) -#define USB_OTG_DOEPMSK_BERRM_Msk (0x1UL << USB_OTG_DOEPMSK_BERRM_Pos) /*!< 0x00001000 */ -#define USB_OTG_DOEPMSK_BERRM USB_OTG_DOEPMSK_BERRM_Msk /*!< Babble error interrupt mask */ -#define USB_OTG_DOEPMSK_NAKM_Pos (13U) -#define USB_OTG_DOEPMSK_NAKM_Msk (0x1UL << USB_OTG_DOEPMSK_NAKM_Pos) /*!< 0x00002000 */ -#define USB_OTG_DOEPMSK_NAKM USB_OTG_DOEPMSK_NAKM_Msk /*!< OUT Packet NAK interrupt mask */ -#define USB_OTG_DOEPMSK_NYETM_Pos (14U) -#define USB_OTG_DOEPMSK_NYETM_Msk (0x1UL << USB_OTG_DOEPMSK_NYETM_Pos) /*!< 0x00004000 */ -#define USB_OTG_DOEPMSK_NYETM USB_OTG_DOEPMSK_NYETM_Msk /*!< NYET interrupt mask */ -/******************** Bit definition for USB_OTG_GINTSTS register ********************/ -#define USB_OTG_GINTSTS_CMOD_Pos (0U) -#define USB_OTG_GINTSTS_CMOD_Msk (0x1UL << USB_OTG_GINTSTS_CMOD_Pos) /*!< 0x00000001 */ -#define USB_OTG_GINTSTS_CMOD USB_OTG_GINTSTS_CMOD_Msk /*!< Current mode of operation */ -#define USB_OTG_GINTSTS_MMIS_Pos (1U) -#define USB_OTG_GINTSTS_MMIS_Msk (0x1UL << USB_OTG_GINTSTS_MMIS_Pos) /*!< 0x00000002 */ -#define USB_OTG_GINTSTS_MMIS USB_OTG_GINTSTS_MMIS_Msk /*!< Mode mismatch interrupt */ -#define USB_OTG_GINTSTS_OTGINT_Pos (2U) -#define USB_OTG_GINTSTS_OTGINT_Msk (0x1UL << USB_OTG_GINTSTS_OTGINT_Pos) /*!< 0x00000004 */ -#define USB_OTG_GINTSTS_OTGINT USB_OTG_GINTSTS_OTGINT_Msk /*!< OTG interrupt */ -#define USB_OTG_GINTSTS_SOF_Pos (3U) -#define USB_OTG_GINTSTS_SOF_Msk (0x1UL << USB_OTG_GINTSTS_SOF_Pos) /*!< 0x00000008 */ -#define USB_OTG_GINTSTS_SOF USB_OTG_GINTSTS_SOF_Msk /*!< Start of frame */ -#define USB_OTG_GINTSTS_RXFLVL_Pos (4U) -#define USB_OTG_GINTSTS_RXFLVL_Msk (0x1UL << USB_OTG_GINTSTS_RXFLVL_Pos) /*!< 0x00000010 */ -#define USB_OTG_GINTSTS_RXFLVL USB_OTG_GINTSTS_RXFLVL_Msk /*!< RxFIFO nonempty */ -#define USB_OTG_GINTSTS_NPTXFE_Pos (5U) -#define USB_OTG_GINTSTS_NPTXFE_Msk (0x1UL << USB_OTG_GINTSTS_NPTXFE_Pos) /*!< 0x00000020 */ -#define USB_OTG_GINTSTS_NPTXFE USB_OTG_GINTSTS_NPTXFE_Msk /*!< Nonperiodic TxFIFO empty */ -#define USB_OTG_GINTSTS_GINAKEFF_Pos (6U) -#define USB_OTG_GINTSTS_GINAKEFF_Msk (0x1UL << USB_OTG_GINTSTS_GINAKEFF_Pos) /*!< 0x00000040 */ -#define USB_OTG_GINTSTS_GINAKEFF USB_OTG_GINTSTS_GINAKEFF_Msk /*!< Global IN nonperiodic NAK effective */ -#define USB_OTG_GINTSTS_BOUTNAKEFF_Pos (7U) -#define USB_OTG_GINTSTS_BOUTNAKEFF_Msk (0x1UL << USB_OTG_GINTSTS_BOUTNAKEFF_Pos) /*!< 0x00000080 */ -#define USB_OTG_GINTSTS_BOUTNAKEFF USB_OTG_GINTSTS_BOUTNAKEFF_Msk /*!< Global OUT NAK effective */ -#define USB_OTG_GINTSTS_ESUSP_Pos (10U) -#define USB_OTG_GINTSTS_ESUSP_Msk (0x1UL << USB_OTG_GINTSTS_ESUSP_Pos) /*!< 0x00000400 */ -#define USB_OTG_GINTSTS_ESUSP USB_OTG_GINTSTS_ESUSP_Msk /*!< Early suspend */ -#define USB_OTG_GINTSTS_USBSUSP_Pos (11U) -#define USB_OTG_GINTSTS_USBSUSP_Msk (0x1UL << USB_OTG_GINTSTS_USBSUSP_Pos) /*!< 0x00000800 */ -#define USB_OTG_GINTSTS_USBSUSP USB_OTG_GINTSTS_USBSUSP_Msk /*!< USB suspend */ -#define USB_OTG_GINTSTS_USBRST_Pos (12U) -#define USB_OTG_GINTSTS_USBRST_Msk (0x1UL << USB_OTG_GINTSTS_USBRST_Pos) /*!< 0x00001000 */ -#define USB_OTG_GINTSTS_USBRST USB_OTG_GINTSTS_USBRST_Msk /*!< USB reset */ -#define USB_OTG_GINTSTS_ENUMDNE_Pos (13U) -#define USB_OTG_GINTSTS_ENUMDNE_Msk (0x1UL << USB_OTG_GINTSTS_ENUMDNE_Pos) /*!< 0x00002000 */ -#define USB_OTG_GINTSTS_ENUMDNE USB_OTG_GINTSTS_ENUMDNE_Msk /*!< Enumeration done */ -#define USB_OTG_GINTSTS_ISOODRP_Pos (14U) -#define USB_OTG_GINTSTS_ISOODRP_Msk (0x1UL << USB_OTG_GINTSTS_ISOODRP_Pos) /*!< 0x00004000 */ -#define USB_OTG_GINTSTS_ISOODRP USB_OTG_GINTSTS_ISOODRP_Msk /*!< Isochronous OUT packet dropped interrupt */ -#define USB_OTG_GINTSTS_EOPF_Pos (15U) -#define USB_OTG_GINTSTS_EOPF_Msk (0x1UL << USB_OTG_GINTSTS_EOPF_Pos) /*!< 0x00008000 */ -#define USB_OTG_GINTSTS_EOPF USB_OTG_GINTSTS_EOPF_Msk /*!< End of periodic frame interrupt */ -#define USB_OTG_GINTSTS_IEPINT_Pos (18U) -#define USB_OTG_GINTSTS_IEPINT_Msk (0x1UL << USB_OTG_GINTSTS_IEPINT_Pos) /*!< 0x00040000 */ -#define USB_OTG_GINTSTS_IEPINT USB_OTG_GINTSTS_IEPINT_Msk /*!< IN endpoint interrupt */ -#define USB_OTG_GINTSTS_OEPINT_Pos (19U) -#define USB_OTG_GINTSTS_OEPINT_Msk (0x1UL << USB_OTG_GINTSTS_OEPINT_Pos) /*!< 0x00080000 */ -#define USB_OTG_GINTSTS_OEPINT USB_OTG_GINTSTS_OEPINT_Msk /*!< OUT endpoint interrupt */ -#define USB_OTG_GINTSTS_IISOIXFR_Pos (20U) -#define USB_OTG_GINTSTS_IISOIXFR_Msk (0x1UL << USB_OTG_GINTSTS_IISOIXFR_Pos) /*!< 0x00100000 */ -#define USB_OTG_GINTSTS_IISOIXFR USB_OTG_GINTSTS_IISOIXFR_Msk /*!< Incomplete isochronous IN transfer */ -#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos (21U) -#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk (0x1UL << USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos) /*!< 0x00200000 */ -#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk /*!< Incomplete periodic transfer */ -#define USB_OTG_GINTSTS_DATAFSUSP_Pos (22U) -#define USB_OTG_GINTSTS_DATAFSUSP_Msk (0x1UL << USB_OTG_GINTSTS_DATAFSUSP_Pos) /*!< 0x00400000 */ -#define USB_OTG_GINTSTS_DATAFSUSP USB_OTG_GINTSTS_DATAFSUSP_Msk /*!< Data fetch suspended */ -#define USB_OTG_GINTSTS_HPRTINT_Pos (24U) -#define USB_OTG_GINTSTS_HPRTINT_Msk (0x1UL << USB_OTG_GINTSTS_HPRTINT_Pos) /*!< 0x01000000 */ -#define USB_OTG_GINTSTS_HPRTINT USB_OTG_GINTSTS_HPRTINT_Msk /*!< Host port interrupt */ -#define USB_OTG_GINTSTS_HCINT_Pos (25U) -#define USB_OTG_GINTSTS_HCINT_Msk (0x1UL << USB_OTG_GINTSTS_HCINT_Pos) /*!< 0x02000000 */ -#define USB_OTG_GINTSTS_HCINT USB_OTG_GINTSTS_HCINT_Msk /*!< Host channels interrupt */ -#define USB_OTG_GINTSTS_PTXFE_Pos (26U) -#define USB_OTG_GINTSTS_PTXFE_Msk (0x1UL << USB_OTG_GINTSTS_PTXFE_Pos) /*!< 0x04000000 */ -#define USB_OTG_GINTSTS_PTXFE USB_OTG_GINTSTS_PTXFE_Msk /*!< Periodic TxFIFO empty */ -#define USB_OTG_GINTSTS_CIDSCHG_Pos (28U) -#define USB_OTG_GINTSTS_CIDSCHG_Msk (0x1UL << USB_OTG_GINTSTS_CIDSCHG_Pos) /*!< 0x10000000 */ -#define USB_OTG_GINTSTS_CIDSCHG USB_OTG_GINTSTS_CIDSCHG_Msk /*!< Connector ID status change */ -#define USB_OTG_GINTSTS_DISCINT_Pos (29U) -#define USB_OTG_GINTSTS_DISCINT_Msk (0x1UL << USB_OTG_GINTSTS_DISCINT_Pos) /*!< 0x20000000 */ -#define USB_OTG_GINTSTS_DISCINT USB_OTG_GINTSTS_DISCINT_Msk /*!< Disconnect detected interrupt */ -#define USB_OTG_GINTSTS_SRQINT_Pos (30U) -#define USB_OTG_GINTSTS_SRQINT_Msk (0x1UL << USB_OTG_GINTSTS_SRQINT_Pos) /*!< 0x40000000 */ -#define USB_OTG_GINTSTS_SRQINT USB_OTG_GINTSTS_SRQINT_Msk /*!< Session request/new session detected interrupt */ -#define USB_OTG_GINTSTS_WKUINT_Pos (31U) -#define USB_OTG_GINTSTS_WKUINT_Msk (0x1UL << USB_OTG_GINTSTS_WKUINT_Pos) /*!< 0x80000000 */ -#define USB_OTG_GINTSTS_WKUINT USB_OTG_GINTSTS_WKUINT_Msk /*!< Resume/remote wakeup detected interrupt */ - -/******************** Bit definition for USB_OTG_GINTMSK register ********************/ -#define USB_OTG_GINTMSK_MMISM_Pos (1U) -#define USB_OTG_GINTMSK_MMISM_Msk (0x1UL << USB_OTG_GINTMSK_MMISM_Pos) /*!< 0x00000002 */ -#define USB_OTG_GINTMSK_MMISM USB_OTG_GINTMSK_MMISM_Msk /*!< Mode mismatch interrupt mask */ -#define USB_OTG_GINTMSK_OTGINT_Pos (2U) -#define USB_OTG_GINTMSK_OTGINT_Msk (0x1UL << USB_OTG_GINTMSK_OTGINT_Pos) /*!< 0x00000004 */ -#define USB_OTG_GINTMSK_OTGINT USB_OTG_GINTMSK_OTGINT_Msk /*!< OTG interrupt mask */ -#define USB_OTG_GINTMSK_SOFM_Pos (3U) -#define USB_OTG_GINTMSK_SOFM_Msk (0x1UL << USB_OTG_GINTMSK_SOFM_Pos) /*!< 0x00000008 */ -#define USB_OTG_GINTMSK_SOFM USB_OTG_GINTMSK_SOFM_Msk /*!< Start of frame mask */ -#define USB_OTG_GINTMSK_RXFLVLM_Pos (4U) -#define USB_OTG_GINTMSK_RXFLVLM_Msk (0x1UL << USB_OTG_GINTMSK_RXFLVLM_Pos) /*!< 0x00000010 */ -#define USB_OTG_GINTMSK_RXFLVLM USB_OTG_GINTMSK_RXFLVLM_Msk /*!< Receive FIFO nonempty mask */ -#define USB_OTG_GINTMSK_NPTXFEM_Pos (5U) -#define USB_OTG_GINTMSK_NPTXFEM_Msk (0x1UL << USB_OTG_GINTMSK_NPTXFEM_Pos) /*!< 0x00000020 */ -#define USB_OTG_GINTMSK_NPTXFEM USB_OTG_GINTMSK_NPTXFEM_Msk /*!< Nonperiodic TxFIFO empty mask */ -#define USB_OTG_GINTMSK_GINAKEFFM_Pos (6U) -#define USB_OTG_GINTMSK_GINAKEFFM_Msk (0x1UL << USB_OTG_GINTMSK_GINAKEFFM_Pos) /*!< 0x00000040 */ -#define USB_OTG_GINTMSK_GINAKEFFM USB_OTG_GINTMSK_GINAKEFFM_Msk /*!< Global nonperiodic IN NAK effective mask */ -#define USB_OTG_GINTMSK_GONAKEFFM_Pos (7U) -#define USB_OTG_GINTMSK_GONAKEFFM_Msk (0x1UL << USB_OTG_GINTMSK_GONAKEFFM_Pos) /*!< 0x00000080 */ -#define USB_OTG_GINTMSK_GONAKEFFM USB_OTG_GINTMSK_GONAKEFFM_Msk /*!< Global OUT NAK effective mask */ -#define USB_OTG_GINTMSK_ESUSPM_Pos (10U) -#define USB_OTG_GINTMSK_ESUSPM_Msk (0x1UL << USB_OTG_GINTMSK_ESUSPM_Pos) /*!< 0x00000400 */ -#define USB_OTG_GINTMSK_ESUSPM USB_OTG_GINTMSK_ESUSPM_Msk /*!< Early suspend mask */ -#define USB_OTG_GINTMSK_USBSUSPM_Pos (11U) -#define USB_OTG_GINTMSK_USBSUSPM_Msk (0x1UL << USB_OTG_GINTMSK_USBSUSPM_Pos) /*!< 0x00000800 */ -#define USB_OTG_GINTMSK_USBSUSPM USB_OTG_GINTMSK_USBSUSPM_Msk /*!< USB suspend mask */ -#define USB_OTG_GINTMSK_USBRST_Pos (12U) -#define USB_OTG_GINTMSK_USBRST_Msk (0x1UL << USB_OTG_GINTMSK_USBRST_Pos) /*!< 0x00001000 */ -#define USB_OTG_GINTMSK_USBRST USB_OTG_GINTMSK_USBRST_Msk /*!< USB reset mask */ -#define USB_OTG_GINTMSK_ENUMDNEM_Pos (13U) -#define USB_OTG_GINTMSK_ENUMDNEM_Msk (0x1UL << USB_OTG_GINTMSK_ENUMDNEM_Pos) /*!< 0x00002000 */ -#define USB_OTG_GINTMSK_ENUMDNEM USB_OTG_GINTMSK_ENUMDNEM_Msk /*!< Enumeration done mask */ -#define USB_OTG_GINTMSK_ISOODRPM_Pos (14U) -#define USB_OTG_GINTMSK_ISOODRPM_Msk (0x1UL << USB_OTG_GINTMSK_ISOODRPM_Pos) /*!< 0x00004000 */ -#define USB_OTG_GINTMSK_ISOODRPM USB_OTG_GINTMSK_ISOODRPM_Msk /*!< Isochronous OUT packet dropped interrupt mask */ -#define USB_OTG_GINTMSK_EOPFM_Pos (15U) -#define USB_OTG_GINTMSK_EOPFM_Msk (0x1UL << USB_OTG_GINTMSK_EOPFM_Pos) /*!< 0x00008000 */ -#define USB_OTG_GINTMSK_EOPFM USB_OTG_GINTMSK_EOPFM_Msk /*!< End of periodic frame interrupt mask */ -#define USB_OTG_GINTMSK_EPMISM_Pos (17U) -#define USB_OTG_GINTMSK_EPMISM_Msk (0x1UL << USB_OTG_GINTMSK_EPMISM_Pos) /*!< 0x00020000 */ -#define USB_OTG_GINTMSK_EPMISM USB_OTG_GINTMSK_EPMISM_Msk /*!< Endpoint mismatch interrupt mask */ -#define USB_OTG_GINTMSK_IEPINT_Pos (18U) -#define USB_OTG_GINTMSK_IEPINT_Msk (0x1UL << USB_OTG_GINTMSK_IEPINT_Pos) /*!< 0x00040000 */ -#define USB_OTG_GINTMSK_IEPINT USB_OTG_GINTMSK_IEPINT_Msk /*!< IN endpoints interrupt mask */ -#define USB_OTG_GINTMSK_OEPINT_Pos (19U) -#define USB_OTG_GINTMSK_OEPINT_Msk (0x1UL << USB_OTG_GINTMSK_OEPINT_Pos) /*!< 0x00080000 */ -#define USB_OTG_GINTMSK_OEPINT USB_OTG_GINTMSK_OEPINT_Msk /*!< OUT endpoints interrupt mask */ -#define USB_OTG_GINTMSK_IISOIXFRM_Pos (20U) -#define USB_OTG_GINTMSK_IISOIXFRM_Msk (0x1UL << USB_OTG_GINTMSK_IISOIXFRM_Pos) /*!< 0x00100000 */ -#define USB_OTG_GINTMSK_IISOIXFRM USB_OTG_GINTMSK_IISOIXFRM_Msk /*!< Incomplete isochronous IN transfer mask */ -#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos (21U) -#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk (0x1UL << USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos) /*!< 0x00200000 */ -#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk /*!< Incomplete periodic transfer mask */ -#define USB_OTG_GINTMSK_FSUSPM_Pos (22U) -#define USB_OTG_GINTMSK_FSUSPM_Msk (0x1UL << USB_OTG_GINTMSK_FSUSPM_Pos) /*!< 0x00400000 */ -#define USB_OTG_GINTMSK_FSUSPM USB_OTG_GINTMSK_FSUSPM_Msk /*!< Data fetch suspended mask */ -#define USB_OTG_GINTMSK_PRTIM_Pos (24U) -#define USB_OTG_GINTMSK_PRTIM_Msk (0x1UL << USB_OTG_GINTMSK_PRTIM_Pos) /*!< 0x01000000 */ -#define USB_OTG_GINTMSK_PRTIM USB_OTG_GINTMSK_PRTIM_Msk /*!< Host port interrupt mask */ -#define USB_OTG_GINTMSK_HCIM_Pos (25U) -#define USB_OTG_GINTMSK_HCIM_Msk (0x1UL << USB_OTG_GINTMSK_HCIM_Pos) /*!< 0x02000000 */ -#define USB_OTG_GINTMSK_HCIM USB_OTG_GINTMSK_HCIM_Msk /*!< Host channels interrupt mask */ -#define USB_OTG_GINTMSK_PTXFEM_Pos (26U) -#define USB_OTG_GINTMSK_PTXFEM_Msk (0x1UL << USB_OTG_GINTMSK_PTXFEM_Pos) /*!< 0x04000000 */ -#define USB_OTG_GINTMSK_PTXFEM USB_OTG_GINTMSK_PTXFEM_Msk /*!< Periodic TxFIFO empty mask */ -#define USB_OTG_GINTMSK_CIDSCHGM_Pos (28U) -#define USB_OTG_GINTMSK_CIDSCHGM_Msk (0x1UL << USB_OTG_GINTMSK_CIDSCHGM_Pos) /*!< 0x10000000 */ -#define USB_OTG_GINTMSK_CIDSCHGM USB_OTG_GINTMSK_CIDSCHGM_Msk /*!< Connector ID status change mask */ -#define USB_OTG_GINTMSK_DISCINT_Pos (29U) -#define USB_OTG_GINTMSK_DISCINT_Msk (0x1UL << USB_OTG_GINTMSK_DISCINT_Pos) /*!< 0x20000000 */ -#define USB_OTG_GINTMSK_DISCINT USB_OTG_GINTMSK_DISCINT_Msk /*!< Disconnect detected interrupt mask */ -#define USB_OTG_GINTMSK_SRQIM_Pos (30U) -#define USB_OTG_GINTMSK_SRQIM_Msk (0x1UL << USB_OTG_GINTMSK_SRQIM_Pos) /*!< 0x40000000 */ -#define USB_OTG_GINTMSK_SRQIM USB_OTG_GINTMSK_SRQIM_Msk /*!< Session request/new session detected interrupt mask */ -#define USB_OTG_GINTMSK_WUIM_Pos (31U) -#define USB_OTG_GINTMSK_WUIM_Msk (0x1UL << USB_OTG_GINTMSK_WUIM_Pos) /*!< 0x80000000 */ -#define USB_OTG_GINTMSK_WUIM USB_OTG_GINTMSK_WUIM_Msk /*!< Resume/remote wakeup detected interrupt mask */ - -/******************** Bit definition for USB_OTG_DAINT register ********************/ -#define USB_OTG_DAINT_IEPINT_Pos (0U) -#define USB_OTG_DAINT_IEPINT_Msk (0xFFFFUL << USB_OTG_DAINT_IEPINT_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_DAINT_IEPINT USB_OTG_DAINT_IEPINT_Msk /*!< IN endpoint interrupt bits */ -#define USB_OTG_DAINT_OEPINT_Pos (16U) -#define USB_OTG_DAINT_OEPINT_Msk (0xFFFFUL << USB_OTG_DAINT_OEPINT_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_DAINT_OEPINT USB_OTG_DAINT_OEPINT_Msk /*!< OUT endpoint interrupt bits */ - -/******************** Bit definition for USB_OTG_HAINTMSK register ********************/ -#define USB_OTG_HAINTMSK_HAINTM_Pos (0U) -#define USB_OTG_HAINTMSK_HAINTM_Msk (0xFFFFUL << USB_OTG_HAINTMSK_HAINTM_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_HAINTMSK_HAINTM USB_OTG_HAINTMSK_HAINTM_Msk /*!< Channel interrupt mask */ - -/******************** Bit definition for USB_OTG_GRXSTSP register ********************/ -#define USB_OTG_GRXSTSP_EPNUM_Pos (0U) -#define USB_OTG_GRXSTSP_EPNUM_Msk (0xFUL << USB_OTG_GRXSTSP_EPNUM_Pos) /*!< 0x0000000F */ -#define USB_OTG_GRXSTSP_EPNUM USB_OTG_GRXSTSP_EPNUM_Msk /*!< IN EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_BCNT_Pos (4U) -#define USB_OTG_GRXSTSP_BCNT_Msk (0x7FFUL << USB_OTG_GRXSTSP_BCNT_Pos) /*!< 0x00007FF0 */ -#define USB_OTG_GRXSTSP_BCNT USB_OTG_GRXSTSP_BCNT_Msk /*!< OUT EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_DPID_Pos (15U) -#define USB_OTG_GRXSTSP_DPID_Msk (0x3UL << USB_OTG_GRXSTSP_DPID_Pos) /*!< 0x00018000 */ -#define USB_OTG_GRXSTSP_DPID USB_OTG_GRXSTSP_DPID_Msk /*!< OUT EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_PKTSTS_Pos (17U) -#define USB_OTG_GRXSTSP_PKTSTS_Msk (0xFUL << USB_OTG_GRXSTSP_PKTSTS_Pos) /*!< 0x001E0000 */ -#define USB_OTG_GRXSTSP_PKTSTS USB_OTG_GRXSTSP_PKTSTS_Msk /*!< OUT EP interrupt mask bits */ - -/******************** Bit definition for USB_OTG_DAINTMSK register ********************/ -#define USB_OTG_DAINTMSK_IEPM_Pos (0U) -#define USB_OTG_DAINTMSK_IEPM_Msk (0xFFFFUL << USB_OTG_DAINTMSK_IEPM_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_DAINTMSK_IEPM USB_OTG_DAINTMSK_IEPM_Msk /*!< IN EP interrupt mask bits */ -#define USB_OTG_DAINTMSK_OEPM_Pos (16U) -#define USB_OTG_DAINTMSK_OEPM_Msk (0xFFFFUL << USB_OTG_DAINTMSK_OEPM_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_DAINTMSK_OEPM USB_OTG_DAINTMSK_OEPM_Msk /*!< OUT EP interrupt mask bits */ - -/******************** Bit definition for USB_OTG_GRXFSIZ register ********************/ -#define USB_OTG_GRXFSIZ_RXFD_Pos (0U) -#define USB_OTG_GRXFSIZ_RXFD_Msk (0xFFFFUL << USB_OTG_GRXFSIZ_RXFD_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_GRXFSIZ_RXFD USB_OTG_GRXFSIZ_RXFD_Msk /*!< RxFIFO depth */ - -/******************** Bit definition for USB_OTG_DVBUSDIS register ********************/ -#define USB_OTG_DVBUSDIS_VBUSDT_Pos (0U) -#define USB_OTG_DVBUSDIS_VBUSDT_Msk (0xFFFFUL << USB_OTG_DVBUSDIS_VBUSDT_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_DVBUSDIS_VBUSDT USB_OTG_DVBUSDIS_VBUSDT_Msk /*!< Device VBUS discharge time */ - -/******************** Bit definition for OTG register ********************/ -#define USB_OTG_NPTXFSA_Pos (0U) -#define USB_OTG_NPTXFSA_Msk (0xFFFFUL << USB_OTG_NPTXFSA_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_NPTXFSA USB_OTG_NPTXFSA_Msk /*!< Nonperiodic transmit RAM start address */ -#define USB_OTG_NPTXFD_Pos (16U) -#define USB_OTG_NPTXFD_Msk (0xFFFFUL << USB_OTG_NPTXFD_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_NPTXFD USB_OTG_NPTXFD_Msk /*!< Nonperiodic TxFIFO depth */ -#define USB_OTG_TX0FSA_Pos (0U) -#define USB_OTG_TX0FSA_Msk (0xFFFFUL << USB_OTG_TX0FSA_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_TX0FSA USB_OTG_TX0FSA_Msk /*!< Endpoint 0 transmit RAM start address */ -#define USB_OTG_TX0FD_Pos (16U) -#define USB_OTG_TX0FD_Msk (0xFFFFUL << USB_OTG_TX0FD_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_TX0FD USB_OTG_TX0FD_Msk /*!< Endpoint 0 TxFIFO depth */ - -/******************** Bit definition for USB_OTG_DVBUSPULSE register ********************/ -#define USB_OTG_DVBUSPULSE_DVBUSP_Pos (0U) -#define USB_OTG_DVBUSPULSE_DVBUSP_Msk (0xFFFUL << USB_OTG_DVBUSPULSE_DVBUSP_Pos) /*!< 0x00000FFF */ -#define USB_OTG_DVBUSPULSE_DVBUSP USB_OTG_DVBUSPULSE_DVBUSP_Msk /*!< Device VBUS pulsing time */ - -/******************** Bit definition for USB_OTG_GNPTXSTS register ********************/ -#define USB_OTG_GNPTXSTS_NPTXFSAV_Pos (0U) -#define USB_OTG_GNPTXSTS_NPTXFSAV_Msk (0xFFFFUL << USB_OTG_GNPTXSTS_NPTXFSAV_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_GNPTXSTS_NPTXFSAV USB_OTG_GNPTXSTS_NPTXFSAV_Msk /*!< Nonperiodic TxFIFO space available */ - -#define USB_OTG_GNPTXSTS_NPTQXSAV_Pos (16U) -#define USB_OTG_GNPTXSTS_NPTQXSAV_Msk (0xFFUL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00FF0000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV USB_OTG_GNPTXSTS_NPTQXSAV_Msk /*!< Nonperiodic transmit request queue space available */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_0 (0x01UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00010000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_1 (0x02UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00020000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_2 (0x04UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00040000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_3 (0x08UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00080000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_4 (0x10UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00100000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_5 (0x20UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00200000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_6 (0x40UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00400000 */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_7 (0x80UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00800000 */ - -#define USB_OTG_GNPTXSTS_NPTXQTOP_Pos (24U) -#define USB_OTG_GNPTXSTS_NPTXQTOP_Msk (0x7FUL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x7F000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP USB_OTG_GNPTXSTS_NPTXQTOP_Msk /*!< Top of the nonperiodic transmit request queue */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_0 (0x01UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x01000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_1 (0x02UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x02000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_2 (0x04UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x04000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_3 (0x08UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x08000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_4 (0x10UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x10000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_5 (0x20UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x20000000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_6 (0x40UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x40000000 */ - -/******************** Bit definition for USB_OTG_DTHRCTL register ********************/ -#define USB_OTG_DTHRCTL_NONISOTHREN_Pos (0U) -#define USB_OTG_DTHRCTL_NONISOTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_NONISOTHREN_Pos) /*!< 0x00000001 */ -#define USB_OTG_DTHRCTL_NONISOTHREN USB_OTG_DTHRCTL_NONISOTHREN_Msk /*!< Nonisochronous IN endpoints threshold enable */ -#define USB_OTG_DTHRCTL_ISOTHREN_Pos (1U) -#define USB_OTG_DTHRCTL_ISOTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_ISOTHREN_Pos) /*!< 0x00000002 */ -#define USB_OTG_DTHRCTL_ISOTHREN USB_OTG_DTHRCTL_ISOTHREN_Msk /*!< ISO IN endpoint threshold enable */ - -#define USB_OTG_DTHRCTL_TXTHRLEN_Pos (2U) -#define USB_OTG_DTHRCTL_TXTHRLEN_Msk (0x1FFUL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x000007FC */ -#define USB_OTG_DTHRCTL_TXTHRLEN USB_OTG_DTHRCTL_TXTHRLEN_Msk /*!< Transmit threshold length */ -#define USB_OTG_DTHRCTL_TXTHRLEN_0 (0x001UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000004 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_1 (0x002UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000008 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_2 (0x004UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000010 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_3 (0x008UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000020 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_4 (0x010UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000040 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_5 (0x020UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000080 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_6 (0x040UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000100 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_7 (0x080UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000200 */ -#define USB_OTG_DTHRCTL_TXTHRLEN_8 (0x100UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000400 */ -#define USB_OTG_DTHRCTL_RXTHREN_Pos (16U) -#define USB_OTG_DTHRCTL_RXTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_RXTHREN_Pos) /*!< 0x00010000 */ -#define USB_OTG_DTHRCTL_RXTHREN USB_OTG_DTHRCTL_RXTHREN_Msk /*!< Receive threshold enable */ - -#define USB_OTG_DTHRCTL_RXTHRLEN_Pos (17U) -#define USB_OTG_DTHRCTL_RXTHRLEN_Msk (0x1FFUL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x03FE0000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN USB_OTG_DTHRCTL_RXTHRLEN_Msk /*!< Receive threshold length */ -#define USB_OTG_DTHRCTL_RXTHRLEN_0 (0x001UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00020000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_1 (0x002UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00040000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_2 (0x004UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00080000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_3 (0x008UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00100000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_4 (0x010UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00200000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_5 (0x020UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00400000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_6 (0x040UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00800000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_7 (0x080UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x01000000 */ -#define USB_OTG_DTHRCTL_RXTHRLEN_8 (0x100UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x02000000 */ -#define USB_OTG_DTHRCTL_ARPEN_Pos (27U) -#define USB_OTG_DTHRCTL_ARPEN_Msk (0x1UL << USB_OTG_DTHRCTL_ARPEN_Pos) /*!< 0x08000000 */ -#define USB_OTG_DTHRCTL_ARPEN USB_OTG_DTHRCTL_ARPEN_Msk /*!< Arbiter parking enable */ - -/******************** Bit definition for USB_OTG_DIEPEMPMSK register ********************/ -#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos (0U) -#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk (0xFFFFUL << USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_DIEPEMPMSK_INEPTXFEM USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk /*!< IN EP Tx FIFO empty interrupt mask bits */ - -/******************** Bit definition for USB_OTG_DEACHINT register ********************/ -#define USB_OTG_DEACHINT_IEP1INT_Pos (1U) -#define USB_OTG_DEACHINT_IEP1INT_Msk (0x1UL << USB_OTG_DEACHINT_IEP1INT_Pos) /*!< 0x00000002 */ -#define USB_OTG_DEACHINT_IEP1INT USB_OTG_DEACHINT_IEP1INT_Msk /*!< IN endpoint 1interrupt bit */ -#define USB_OTG_DEACHINT_OEP1INT_Pos (17U) -#define USB_OTG_DEACHINT_OEP1INT_Msk (0x1UL << USB_OTG_DEACHINT_OEP1INT_Pos) /*!< 0x00020000 */ -#define USB_OTG_DEACHINT_OEP1INT USB_OTG_DEACHINT_OEP1INT_Msk /*!< OUT endpoint 1 interrupt bit */ - -/******************** Bit definition for USB_OTG_GCCFG register ********************/ -#define USB_OTG_GCCFG_PWRDWN_Pos (16U) -#define USB_OTG_GCCFG_PWRDWN_Msk (0x1UL << USB_OTG_GCCFG_PWRDWN_Pos) /*!< 0x00010000 */ -#define USB_OTG_GCCFG_PWRDWN USB_OTG_GCCFG_PWRDWN_Msk /*!< Power down */ -#define USB_OTG_GCCFG_VBUSASEN_Pos (18U) -#define USB_OTG_GCCFG_VBUSASEN_Msk (0x1UL << USB_OTG_GCCFG_VBUSASEN_Pos) /*!< 0x00040000 */ -#define USB_OTG_GCCFG_VBUSASEN USB_OTG_GCCFG_VBUSASEN_Msk /*!< Enable the VBUS sensing device */ -#define USB_OTG_GCCFG_VBUSBSEN_Pos (19U) -#define USB_OTG_GCCFG_VBUSBSEN_Msk (0x1UL << USB_OTG_GCCFG_VBUSBSEN_Pos) /*!< 0x00080000 */ -#define USB_OTG_GCCFG_VBUSBSEN USB_OTG_GCCFG_VBUSBSEN_Msk /*!< Enable the VBUS sensing device */ -#define USB_OTG_GCCFG_SOFOUTEN_Pos (20U) -#define USB_OTG_GCCFG_SOFOUTEN_Msk (0x1UL << USB_OTG_GCCFG_SOFOUTEN_Pos) /*!< 0x00100000 */ -#define USB_OTG_GCCFG_SOFOUTEN USB_OTG_GCCFG_SOFOUTEN_Msk /*!< SOF output enable */ - -/******************** Bit definition for USB_OTG_DEACHINTMSK register ********************/ -#define USB_OTG_DEACHINTMSK_IEP1INTM_Pos (1U) -#define USB_OTG_DEACHINTMSK_IEP1INTM_Msk (0x1UL << USB_OTG_DEACHINTMSK_IEP1INTM_Pos) /*!< 0x00000002 */ -#define USB_OTG_DEACHINTMSK_IEP1INTM USB_OTG_DEACHINTMSK_IEP1INTM_Msk /*!< IN Endpoint 1 interrupt mask bit */ -#define USB_OTG_DEACHINTMSK_OEP1INTM_Pos (17U) -#define USB_OTG_DEACHINTMSK_OEP1INTM_Msk (0x1UL << USB_OTG_DEACHINTMSK_OEP1INTM_Pos) /*!< 0x00020000 */ -#define USB_OTG_DEACHINTMSK_OEP1INTM USB_OTG_DEACHINTMSK_OEP1INTM_Msk /*!< OUT Endpoint 1 interrupt mask bit */ - -/******************** Bit definition for USB_OTG_CID register ********************/ -#define USB_OTG_CID_PRODUCT_ID_Pos (0U) -#define USB_OTG_CID_PRODUCT_ID_Msk (0xFFFFFFFFUL << USB_OTG_CID_PRODUCT_ID_Pos) /*!< 0xFFFFFFFF */ -#define USB_OTG_CID_PRODUCT_ID USB_OTG_CID_PRODUCT_ID_Msk /*!< Product ID field */ - -/******************** Bit definition for USB_OTG_DIEPEACHMSK1 register ********************/ -#define USB_OTG_DIEPEACHMSK1_XFRCM_Pos (0U) -#define USB_OTG_DIEPEACHMSK1_XFRCM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */ -#define USB_OTG_DIEPEACHMSK1_XFRCM USB_OTG_DIEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_EPDM_Pos (1U) -#define USB_OTG_DIEPEACHMSK1_EPDM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */ -#define USB_OTG_DIEPEACHMSK1_EPDM USB_OTG_DIEPEACHMSK1_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_TOM_Pos (3U) -#define USB_OTG_DIEPEACHMSK1_TOM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */ -#define USB_OTG_DIEPEACHMSK1_TOM USB_OTG_DIEPEACHMSK1_TOM_Msk /*!< Timeout condition mask (nonisochronous endpoints) */ -#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos (4U) -#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */ -#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DIEPEACHMSK1_INEPNMM_Pos (5U) -#define USB_OTG_DIEPEACHMSK1_INEPNMM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */ -#define USB_OTG_DIEPEACHMSK1_INEPNMM USB_OTG_DIEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DIEPEACHMSK1_INEPNEM_Pos (6U) -#define USB_OTG_DIEPEACHMSK1_INEPNEM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */ -#define USB_OTG_DIEPEACHMSK1_INEPNEM USB_OTG_DIEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DIEPEACHMSK1_TXFURM_Pos (8U) -#define USB_OTG_DIEPEACHMSK1_TXFURM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */ -#define USB_OTG_DIEPEACHMSK1_TXFURM USB_OTG_DIEPEACHMSK1_TXFURM_Msk /*!< FIFO underrun mask */ -#define USB_OTG_DIEPEACHMSK1_BIM_Pos (9U) -#define USB_OTG_DIEPEACHMSK1_BIM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */ -#define USB_OTG_DIEPEACHMSK1_BIM USB_OTG_DIEPEACHMSK1_BIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_NAKM_Pos (13U) -#define USB_OTG_DIEPEACHMSK1_NAKM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */ -#define USB_OTG_DIEPEACHMSK1_NAKM USB_OTG_DIEPEACHMSK1_NAKM_Msk /*!< NAK interrupt mask */ - -/******************** Bit definition for USB_OTG_HPRT register ********************/ -#define USB_OTG_HPRT_PCSTS_Pos (0U) -#define USB_OTG_HPRT_PCSTS_Msk (0x1UL << USB_OTG_HPRT_PCSTS_Pos) /*!< 0x00000001 */ -#define USB_OTG_HPRT_PCSTS USB_OTG_HPRT_PCSTS_Msk /*!< Port connect status */ -#define USB_OTG_HPRT_PCDET_Pos (1U) -#define USB_OTG_HPRT_PCDET_Msk (0x1UL << USB_OTG_HPRT_PCDET_Pos) /*!< 0x00000002 */ -#define USB_OTG_HPRT_PCDET USB_OTG_HPRT_PCDET_Msk /*!< Port connect detected */ -#define USB_OTG_HPRT_PENA_Pos (2U) -#define USB_OTG_HPRT_PENA_Msk (0x1UL << USB_OTG_HPRT_PENA_Pos) /*!< 0x00000004 */ -#define USB_OTG_HPRT_PENA USB_OTG_HPRT_PENA_Msk /*!< Port enable */ -#define USB_OTG_HPRT_PENCHNG_Pos (3U) -#define USB_OTG_HPRT_PENCHNG_Msk (0x1UL << USB_OTG_HPRT_PENCHNG_Pos) /*!< 0x00000008 */ -#define USB_OTG_HPRT_PENCHNG USB_OTG_HPRT_PENCHNG_Msk /*!< Port enable/disable change */ -#define USB_OTG_HPRT_POCA_Pos (4U) -#define USB_OTG_HPRT_POCA_Msk (0x1UL << USB_OTG_HPRT_POCA_Pos) /*!< 0x00000010 */ -#define USB_OTG_HPRT_POCA USB_OTG_HPRT_POCA_Msk /*!< Port overcurrent active */ -#define USB_OTG_HPRT_POCCHNG_Pos (5U) -#define USB_OTG_HPRT_POCCHNG_Msk (0x1UL << USB_OTG_HPRT_POCCHNG_Pos) /*!< 0x00000020 */ -#define USB_OTG_HPRT_POCCHNG USB_OTG_HPRT_POCCHNG_Msk /*!< Port overcurrent change */ -#define USB_OTG_HPRT_PRES_Pos (6U) -#define USB_OTG_HPRT_PRES_Msk (0x1UL << USB_OTG_HPRT_PRES_Pos) /*!< 0x00000040 */ -#define USB_OTG_HPRT_PRES USB_OTG_HPRT_PRES_Msk /*!< Port resume */ -#define USB_OTG_HPRT_PSUSP_Pos (7U) -#define USB_OTG_HPRT_PSUSP_Msk (0x1UL << USB_OTG_HPRT_PSUSP_Pos) /*!< 0x00000080 */ -#define USB_OTG_HPRT_PSUSP USB_OTG_HPRT_PSUSP_Msk /*!< Port suspend */ -#define USB_OTG_HPRT_PRST_Pos (8U) -#define USB_OTG_HPRT_PRST_Msk (0x1UL << USB_OTG_HPRT_PRST_Pos) /*!< 0x00000100 */ -#define USB_OTG_HPRT_PRST USB_OTG_HPRT_PRST_Msk /*!< Port reset */ - -#define USB_OTG_HPRT_PLSTS_Pos (10U) -#define USB_OTG_HPRT_PLSTS_Msk (0x3UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000C00 */ -#define USB_OTG_HPRT_PLSTS USB_OTG_HPRT_PLSTS_Msk /*!< Port line status */ -#define USB_OTG_HPRT_PLSTS_0 (0x1UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000400 */ -#define USB_OTG_HPRT_PLSTS_1 (0x2UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000800 */ -#define USB_OTG_HPRT_PPWR_Pos (12U) -#define USB_OTG_HPRT_PPWR_Msk (0x1UL << USB_OTG_HPRT_PPWR_Pos) /*!< 0x00001000 */ -#define USB_OTG_HPRT_PPWR USB_OTG_HPRT_PPWR_Msk /*!< Port power */ - -#define USB_OTG_HPRT_PTCTL_Pos (13U) -#define USB_OTG_HPRT_PTCTL_Msk (0xFUL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x0001E000 */ -#define USB_OTG_HPRT_PTCTL USB_OTG_HPRT_PTCTL_Msk /*!< Port test control */ -#define USB_OTG_HPRT_PTCTL_0 (0x1UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00002000 */ -#define USB_OTG_HPRT_PTCTL_1 (0x2UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00004000 */ -#define USB_OTG_HPRT_PTCTL_2 (0x4UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00008000 */ -#define USB_OTG_HPRT_PTCTL_3 (0x8UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00010000 */ - -#define USB_OTG_HPRT_PSPD_Pos (17U) -#define USB_OTG_HPRT_PSPD_Msk (0x3UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00060000 */ -#define USB_OTG_HPRT_PSPD USB_OTG_HPRT_PSPD_Msk /*!< Port speed */ -#define USB_OTG_HPRT_PSPD_0 (0x1UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00020000 */ -#define USB_OTG_HPRT_PSPD_1 (0x2UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00040000 */ - -/******************** Bit definition for USB_OTG_DOEPEACHMSK1 register ********************/ -#define USB_OTG_DOEPEACHMSK1_XFRCM_Pos (0U) -#define USB_OTG_DOEPEACHMSK1_XFRCM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */ -#define USB_OTG_DOEPEACHMSK1_XFRCM USB_OTG_DOEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_EPDM_Pos (1U) -#define USB_OTG_DOEPEACHMSK1_EPDM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */ -#define USB_OTG_DOEPEACHMSK1_EPDM USB_OTG_DOEPEACHMSK1_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_TOM_Pos (3U) -#define USB_OTG_DOEPEACHMSK1_TOM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */ -#define USB_OTG_DOEPEACHMSK1_TOM USB_OTG_DOEPEACHMSK1_TOM_Msk /*!< Timeout condition mask */ -#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos (4U) -#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */ -#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DOEPEACHMSK1_INEPNMM_Pos (5U) -#define USB_OTG_DOEPEACHMSK1_INEPNMM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */ -#define USB_OTG_DOEPEACHMSK1_INEPNMM USB_OTG_DOEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DOEPEACHMSK1_INEPNEM_Pos (6U) -#define USB_OTG_DOEPEACHMSK1_INEPNEM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */ -#define USB_OTG_DOEPEACHMSK1_INEPNEM USB_OTG_DOEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DOEPEACHMSK1_TXFURM_Pos (8U) -#define USB_OTG_DOEPEACHMSK1_TXFURM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */ -#define USB_OTG_DOEPEACHMSK1_TXFURM USB_OTG_DOEPEACHMSK1_TXFURM_Msk /*!< OUT packet error mask */ -#define USB_OTG_DOEPEACHMSK1_BIM_Pos (9U) -#define USB_OTG_DOEPEACHMSK1_BIM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */ -#define USB_OTG_DOEPEACHMSK1_BIM USB_OTG_DOEPEACHMSK1_BIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_BERRM_Pos (12U) -#define USB_OTG_DOEPEACHMSK1_BERRM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_BERRM_Pos) /*!< 0x00001000 */ -#define USB_OTG_DOEPEACHMSK1_BERRM USB_OTG_DOEPEACHMSK1_BERRM_Msk /*!< Bubble error interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_NAKM_Pos (13U) -#define USB_OTG_DOEPEACHMSK1_NAKM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */ -#define USB_OTG_DOEPEACHMSK1_NAKM USB_OTG_DOEPEACHMSK1_NAKM_Msk /*!< NAK interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_NYETM_Pos (14U) -#define USB_OTG_DOEPEACHMSK1_NYETM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_NYETM_Pos) /*!< 0x00004000 */ -#define USB_OTG_DOEPEACHMSK1_NYETM USB_OTG_DOEPEACHMSK1_NYETM_Msk /*!< NYET interrupt mask */ - -/******************** Bit definition for USB_OTG_HPTXFSIZ register ********************/ -#define USB_OTG_HPTXFSIZ_PTXSA_Pos (0U) -#define USB_OTG_HPTXFSIZ_PTXSA_Msk (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXSA_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_HPTXFSIZ_PTXSA USB_OTG_HPTXFSIZ_PTXSA_Msk /*!< Host periodic TxFIFO start address */ -#define USB_OTG_HPTXFSIZ_PTXFD_Pos (16U) -#define USB_OTG_HPTXFSIZ_PTXFD_Msk (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXFD_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_HPTXFSIZ_PTXFD USB_OTG_HPTXFSIZ_PTXFD_Msk /*!< Host periodic TxFIFO depth */ - -/******************** Bit definition for USB_OTG_DIEPCTL register ********************/ -#define USB_OTG_DIEPCTL_MPSIZ_Pos (0U) -#define USB_OTG_DIEPCTL_MPSIZ_Msk (0x7FFUL << USB_OTG_DIEPCTL_MPSIZ_Pos) /*!< 0x000007FF */ -#define USB_OTG_DIEPCTL_MPSIZ USB_OTG_DIEPCTL_MPSIZ_Msk /*!< Maximum packet size */ -#define USB_OTG_DIEPCTL_USBAEP_Pos (15U) -#define USB_OTG_DIEPCTL_USBAEP_Msk (0x1UL << USB_OTG_DIEPCTL_USBAEP_Pos) /*!< 0x00008000 */ -#define USB_OTG_DIEPCTL_USBAEP USB_OTG_DIEPCTL_USBAEP_Msk /*!< USB active endpoint */ -#define USB_OTG_DIEPCTL_EONUM_DPID_Pos (16U) -#define USB_OTG_DIEPCTL_EONUM_DPID_Msk (0x1UL << USB_OTG_DIEPCTL_EONUM_DPID_Pos) /*!< 0x00010000 */ -#define USB_OTG_DIEPCTL_EONUM_DPID USB_OTG_DIEPCTL_EONUM_DPID_Msk /*!< Even/odd frame */ -#define USB_OTG_DIEPCTL_NAKSTS_Pos (17U) -#define USB_OTG_DIEPCTL_NAKSTS_Msk (0x1UL << USB_OTG_DIEPCTL_NAKSTS_Pos) /*!< 0x00020000 */ -#define USB_OTG_DIEPCTL_NAKSTS USB_OTG_DIEPCTL_NAKSTS_Msk /*!< NAK status */ - -#define USB_OTG_DIEPCTL_EPTYP_Pos (18U) -#define USB_OTG_DIEPCTL_EPTYP_Msk (0x3UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x000C0000 */ -#define USB_OTG_DIEPCTL_EPTYP USB_OTG_DIEPCTL_EPTYP_Msk /*!< Endpoint type */ -#define USB_OTG_DIEPCTL_EPTYP_0 (0x1UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00040000 */ -#define USB_OTG_DIEPCTL_EPTYP_1 (0x2UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00080000 */ -#define USB_OTG_DIEPCTL_STALL_Pos (21U) -#define USB_OTG_DIEPCTL_STALL_Msk (0x1UL << USB_OTG_DIEPCTL_STALL_Pos) /*!< 0x00200000 */ -#define USB_OTG_DIEPCTL_STALL USB_OTG_DIEPCTL_STALL_Msk /*!< STALL handshake */ - -#define USB_OTG_DIEPCTL_TXFNUM_Pos (22U) -#define USB_OTG_DIEPCTL_TXFNUM_Msk (0xFUL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x03C00000 */ -#define USB_OTG_DIEPCTL_TXFNUM USB_OTG_DIEPCTL_TXFNUM_Msk /*!< TxFIFO number */ -#define USB_OTG_DIEPCTL_TXFNUM_0 (0x1UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00400000 */ -#define USB_OTG_DIEPCTL_TXFNUM_1 (0x2UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00800000 */ -#define USB_OTG_DIEPCTL_TXFNUM_2 (0x4UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x01000000 */ -#define USB_OTG_DIEPCTL_TXFNUM_3 (0x8UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x02000000 */ -#define USB_OTG_DIEPCTL_CNAK_Pos (26U) -#define USB_OTG_DIEPCTL_CNAK_Msk (0x1UL << USB_OTG_DIEPCTL_CNAK_Pos) /*!< 0x04000000 */ -#define USB_OTG_DIEPCTL_CNAK USB_OTG_DIEPCTL_CNAK_Msk /*!< Clear NAK */ -#define USB_OTG_DIEPCTL_SNAK_Pos (27U) -#define USB_OTG_DIEPCTL_SNAK_Msk (0x1UL << USB_OTG_DIEPCTL_SNAK_Pos) /*!< 0x08000000 */ -#define USB_OTG_DIEPCTL_SNAK USB_OTG_DIEPCTL_SNAK_Msk /*!< Set NAK */ -#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos (28U) -#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos) /*!< 0x10000000 */ -#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk /*!< Set DATA0 PID */ -#define USB_OTG_DIEPCTL_SODDFRM_Pos (29U) -#define USB_OTG_DIEPCTL_SODDFRM_Msk (0x1UL << USB_OTG_DIEPCTL_SODDFRM_Pos) /*!< 0x20000000 */ -#define USB_OTG_DIEPCTL_SODDFRM USB_OTG_DIEPCTL_SODDFRM_Msk /*!< Set odd frame */ -#define USB_OTG_DIEPCTL_EPDIS_Pos (30U) -#define USB_OTG_DIEPCTL_EPDIS_Msk (0x1UL << USB_OTG_DIEPCTL_EPDIS_Pos) /*!< 0x40000000 */ -#define USB_OTG_DIEPCTL_EPDIS USB_OTG_DIEPCTL_EPDIS_Msk /*!< Endpoint disable */ -#define USB_OTG_DIEPCTL_EPENA_Pos (31U) -#define USB_OTG_DIEPCTL_EPENA_Msk (0x1UL << USB_OTG_DIEPCTL_EPENA_Pos) /*!< 0x80000000 */ -#define USB_OTG_DIEPCTL_EPENA USB_OTG_DIEPCTL_EPENA_Msk /*!< Endpoint enable */ - -/******************** Bit definition for USB_OTG_HCCHAR register ********************/ -#define USB_OTG_HCCHAR_MPSIZ_Pos (0U) -#define USB_OTG_HCCHAR_MPSIZ_Msk (0x7FFUL << USB_OTG_HCCHAR_MPSIZ_Pos) /*!< 0x000007FF */ -#define USB_OTG_HCCHAR_MPSIZ USB_OTG_HCCHAR_MPSIZ_Msk /*!< Maximum packet size */ - -#define USB_OTG_HCCHAR_EPNUM_Pos (11U) -#define USB_OTG_HCCHAR_EPNUM_Msk (0xFUL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00007800 */ -#define USB_OTG_HCCHAR_EPNUM USB_OTG_HCCHAR_EPNUM_Msk /*!< Endpoint number */ -#define USB_OTG_HCCHAR_EPNUM_0 (0x1UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00000800 */ -#define USB_OTG_HCCHAR_EPNUM_1 (0x2UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00001000 */ -#define USB_OTG_HCCHAR_EPNUM_2 (0x4UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00002000 */ -#define USB_OTG_HCCHAR_EPNUM_3 (0x8UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00004000 */ -#define USB_OTG_HCCHAR_EPDIR_Pos (15U) -#define USB_OTG_HCCHAR_EPDIR_Msk (0x1UL << USB_OTG_HCCHAR_EPDIR_Pos) /*!< 0x00008000 */ -#define USB_OTG_HCCHAR_EPDIR USB_OTG_HCCHAR_EPDIR_Msk /*!< Endpoint direction */ -#define USB_OTG_HCCHAR_LSDEV_Pos (17U) -#define USB_OTG_HCCHAR_LSDEV_Msk (0x1UL << USB_OTG_HCCHAR_LSDEV_Pos) /*!< 0x00020000 */ -#define USB_OTG_HCCHAR_LSDEV USB_OTG_HCCHAR_LSDEV_Msk /*!< Low-speed device */ - -#define USB_OTG_HCCHAR_EPTYP_Pos (18U) -#define USB_OTG_HCCHAR_EPTYP_Msk (0x3UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x000C0000 */ -#define USB_OTG_HCCHAR_EPTYP USB_OTG_HCCHAR_EPTYP_Msk /*!< Endpoint type */ -#define USB_OTG_HCCHAR_EPTYP_0 (0x1UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00040000 */ -#define USB_OTG_HCCHAR_EPTYP_1 (0x2UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00080000 */ - -#define USB_OTG_HCCHAR_MC_Pos (20U) -#define USB_OTG_HCCHAR_MC_Msk (0x3UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00300000 */ -#define USB_OTG_HCCHAR_MC USB_OTG_HCCHAR_MC_Msk /*!< Multi Count (MC) / Error Count (EC) */ -#define USB_OTG_HCCHAR_MC_0 (0x1UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00100000 */ -#define USB_OTG_HCCHAR_MC_1 (0x2UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00200000 */ - -#define USB_OTG_HCCHAR_DAD_Pos (22U) -#define USB_OTG_HCCHAR_DAD_Msk (0x7FUL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x1FC00000 */ -#define USB_OTG_HCCHAR_DAD USB_OTG_HCCHAR_DAD_Msk /*!< Device address */ -#define USB_OTG_HCCHAR_DAD_0 (0x01UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x00400000 */ -#define USB_OTG_HCCHAR_DAD_1 (0x02UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x00800000 */ -#define USB_OTG_HCCHAR_DAD_2 (0x04UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x01000000 */ -#define USB_OTG_HCCHAR_DAD_3 (0x08UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x02000000 */ -#define USB_OTG_HCCHAR_DAD_4 (0x10UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x04000000 */ -#define USB_OTG_HCCHAR_DAD_5 (0x20UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x08000000 */ -#define USB_OTG_HCCHAR_DAD_6 (0x40UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x10000000 */ -#define USB_OTG_HCCHAR_ODDFRM_Pos (29U) -#define USB_OTG_HCCHAR_ODDFRM_Msk (0x1UL << USB_OTG_HCCHAR_ODDFRM_Pos) /*!< 0x20000000 */ -#define USB_OTG_HCCHAR_ODDFRM USB_OTG_HCCHAR_ODDFRM_Msk /*!< Odd frame */ -#define USB_OTG_HCCHAR_CHDIS_Pos (30U) -#define USB_OTG_HCCHAR_CHDIS_Msk (0x1UL << USB_OTG_HCCHAR_CHDIS_Pos) /*!< 0x40000000 */ -#define USB_OTG_HCCHAR_CHDIS USB_OTG_HCCHAR_CHDIS_Msk /*!< Channel disable */ -#define USB_OTG_HCCHAR_CHENA_Pos (31U) -#define USB_OTG_HCCHAR_CHENA_Msk (0x1UL << USB_OTG_HCCHAR_CHENA_Pos) /*!< 0x80000000 */ -#define USB_OTG_HCCHAR_CHENA USB_OTG_HCCHAR_CHENA_Msk /*!< Channel enable */ - -/******************** Bit definition for USB_OTG_HCSPLT register ********************/ - -#define USB_OTG_HCSPLT_PRTADDR_Pos (0U) -#define USB_OTG_HCSPLT_PRTADDR_Msk (0x7FUL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x0000007F */ -#define USB_OTG_HCSPLT_PRTADDR USB_OTG_HCSPLT_PRTADDR_Msk /*!< Port address */ -#define USB_OTG_HCSPLT_PRTADDR_0 (0x01UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000001 */ -#define USB_OTG_HCSPLT_PRTADDR_1 (0x02UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000002 */ -#define USB_OTG_HCSPLT_PRTADDR_2 (0x04UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000004 */ -#define USB_OTG_HCSPLT_PRTADDR_3 (0x08UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000008 */ -#define USB_OTG_HCSPLT_PRTADDR_4 (0x10UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000010 */ -#define USB_OTG_HCSPLT_PRTADDR_5 (0x20UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000020 */ -#define USB_OTG_HCSPLT_PRTADDR_6 (0x40UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000040 */ - -#define USB_OTG_HCSPLT_HUBADDR_Pos (7U) -#define USB_OTG_HCSPLT_HUBADDR_Msk (0x7FUL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00003F80 */ -#define USB_OTG_HCSPLT_HUBADDR USB_OTG_HCSPLT_HUBADDR_Msk /*!< Hub address */ -#define USB_OTG_HCSPLT_HUBADDR_0 (0x01UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000080 */ -#define USB_OTG_HCSPLT_HUBADDR_1 (0x02UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000100 */ -#define USB_OTG_HCSPLT_HUBADDR_2 (0x04UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000200 */ -#define USB_OTG_HCSPLT_HUBADDR_3 (0x08UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000400 */ -#define USB_OTG_HCSPLT_HUBADDR_4 (0x10UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000800 */ -#define USB_OTG_HCSPLT_HUBADDR_5 (0x20UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00001000 */ -#define USB_OTG_HCSPLT_HUBADDR_6 (0x40UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00002000 */ - -#define USB_OTG_HCSPLT_XACTPOS_Pos (14U) -#define USB_OTG_HCSPLT_XACTPOS_Msk (0x3UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x0000C000 */ -#define USB_OTG_HCSPLT_XACTPOS USB_OTG_HCSPLT_XACTPOS_Msk /*!< XACTPOS */ -#define USB_OTG_HCSPLT_XACTPOS_0 (0x1UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00004000 */ -#define USB_OTG_HCSPLT_XACTPOS_1 (0x2UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00008000 */ -#define USB_OTG_HCSPLT_COMPLSPLT_Pos (16U) -#define USB_OTG_HCSPLT_COMPLSPLT_Msk (0x1UL << USB_OTG_HCSPLT_COMPLSPLT_Pos) /*!< 0x00010000 */ -#define USB_OTG_HCSPLT_COMPLSPLT USB_OTG_HCSPLT_COMPLSPLT_Msk /*!< Do complete split */ -#define USB_OTG_HCSPLT_SPLITEN_Pos (31U) -#define USB_OTG_HCSPLT_SPLITEN_Msk (0x1UL << USB_OTG_HCSPLT_SPLITEN_Pos) /*!< 0x80000000 */ -#define USB_OTG_HCSPLT_SPLITEN USB_OTG_HCSPLT_SPLITEN_Msk /*!< Split enable */ - -/******************** Bit definition for USB_OTG_HCINT register ********************/ -#define USB_OTG_HCINT_XFRC_Pos (0U) -#define USB_OTG_HCINT_XFRC_Msk (0x1UL << USB_OTG_HCINT_XFRC_Pos) /*!< 0x00000001 */ -#define USB_OTG_HCINT_XFRC USB_OTG_HCINT_XFRC_Msk /*!< Transfer completed */ -#define USB_OTG_HCINT_CHH_Pos (1U) -#define USB_OTG_HCINT_CHH_Msk (0x1UL << USB_OTG_HCINT_CHH_Pos) /*!< 0x00000002 */ -#define USB_OTG_HCINT_CHH USB_OTG_HCINT_CHH_Msk /*!< Channel halted */ -#define USB_OTG_HCINT_AHBERR_Pos (2U) -#define USB_OTG_HCINT_AHBERR_Msk (0x1UL << USB_OTG_HCINT_AHBERR_Pos) /*!< 0x00000004 */ -#define USB_OTG_HCINT_AHBERR USB_OTG_HCINT_AHBERR_Msk /*!< AHB error */ -#define USB_OTG_HCINT_STALL_Pos (3U) -#define USB_OTG_HCINT_STALL_Msk (0x1UL << USB_OTG_HCINT_STALL_Pos) /*!< 0x00000008 */ -#define USB_OTG_HCINT_STALL USB_OTG_HCINT_STALL_Msk /*!< STALL response received interrupt */ -#define USB_OTG_HCINT_NAK_Pos (4U) -#define USB_OTG_HCINT_NAK_Msk (0x1UL << USB_OTG_HCINT_NAK_Pos) /*!< 0x00000010 */ -#define USB_OTG_HCINT_NAK USB_OTG_HCINT_NAK_Msk /*!< NAK response received interrupt */ -#define USB_OTG_HCINT_ACK_Pos (5U) -#define USB_OTG_HCINT_ACK_Msk (0x1UL << USB_OTG_HCINT_ACK_Pos) /*!< 0x00000020 */ -#define USB_OTG_HCINT_ACK USB_OTG_HCINT_ACK_Msk /*!< ACK response received/transmitted interrupt */ -#define USB_OTG_HCINT_NYET_Pos (6U) -#define USB_OTG_HCINT_NYET_Msk (0x1UL << USB_OTG_HCINT_NYET_Pos) /*!< 0x00000040 */ -#define USB_OTG_HCINT_NYET USB_OTG_HCINT_NYET_Msk /*!< Response received interrupt */ -#define USB_OTG_HCINT_TXERR_Pos (7U) -#define USB_OTG_HCINT_TXERR_Msk (0x1UL << USB_OTG_HCINT_TXERR_Pos) /*!< 0x00000080 */ -#define USB_OTG_HCINT_TXERR USB_OTG_HCINT_TXERR_Msk /*!< Transaction error */ -#define USB_OTG_HCINT_BBERR_Pos (8U) -#define USB_OTG_HCINT_BBERR_Msk (0x1UL << USB_OTG_HCINT_BBERR_Pos) /*!< 0x00000100 */ -#define USB_OTG_HCINT_BBERR USB_OTG_HCINT_BBERR_Msk /*!< Babble error */ -#define USB_OTG_HCINT_FRMOR_Pos (9U) -#define USB_OTG_HCINT_FRMOR_Msk (0x1UL << USB_OTG_HCINT_FRMOR_Pos) /*!< 0x00000200 */ -#define USB_OTG_HCINT_FRMOR USB_OTG_HCINT_FRMOR_Msk /*!< Frame overrun */ -#define USB_OTG_HCINT_DTERR_Pos (10U) -#define USB_OTG_HCINT_DTERR_Msk (0x1UL << USB_OTG_HCINT_DTERR_Pos) /*!< 0x00000400 */ -#define USB_OTG_HCINT_DTERR USB_OTG_HCINT_DTERR_Msk /*!< Data toggle error */ - -/******************** Bit definition for USB_OTG_DIEPINT register ********************/ -#define USB_OTG_DIEPINT_XFRC_Pos (0U) -#define USB_OTG_DIEPINT_XFRC_Msk (0x1UL << USB_OTG_DIEPINT_XFRC_Pos) /*!< 0x00000001 */ -#define USB_OTG_DIEPINT_XFRC USB_OTG_DIEPINT_XFRC_Msk /*!< Transfer completed interrupt */ -#define USB_OTG_DIEPINT_EPDISD_Pos (1U) -#define USB_OTG_DIEPINT_EPDISD_Msk (0x1UL << USB_OTG_DIEPINT_EPDISD_Pos) /*!< 0x00000002 */ -#define USB_OTG_DIEPINT_EPDISD USB_OTG_DIEPINT_EPDISD_Msk /*!< Endpoint disabled interrupt */ -#define USB_OTG_DIEPINT_AHBERR_Pos (2U) -#define USB_OTG_DIEPINT_AHBERR_Msk (0x1UL << USB_OTG_DIEPINT_AHBERR_Pos) /*!< 0x00000004 */ -#define USB_OTG_DIEPINT_AHBERR USB_OTG_DIEPINT_AHBERR_Msk /*!< AHB Error (AHBErr) during an IN transaction */ -#define USB_OTG_DIEPINT_TOC_Pos (3U) -#define USB_OTG_DIEPINT_TOC_Msk (0x1UL << USB_OTG_DIEPINT_TOC_Pos) /*!< 0x00000008 */ -#define USB_OTG_DIEPINT_TOC USB_OTG_DIEPINT_TOC_Msk /*!< Timeout condition */ -#define USB_OTG_DIEPINT_ITTXFE_Pos (4U) -#define USB_OTG_DIEPINT_ITTXFE_Msk (0x1UL << USB_OTG_DIEPINT_ITTXFE_Pos) /*!< 0x00000010 */ -#define USB_OTG_DIEPINT_ITTXFE USB_OTG_DIEPINT_ITTXFE_Msk /*!< IN token received when TxFIFO is empty */ -#define USB_OTG_DIEPINT_INEPNM_Pos (5U) -#define USB_OTG_DIEPINT_INEPNM_Msk (0x1UL << USB_OTG_DIEPINT_INEPNM_Pos) /*!< 0x00000004 */ -#define USB_OTG_DIEPINT_INEPNM USB_OTG_DIEPINT_INEPNM_Msk /*!< IN token received with EP mismatch */ -#define USB_OTG_DIEPINT_INEPNE_Pos (6U) -#define USB_OTG_DIEPINT_INEPNE_Msk (0x1UL << USB_OTG_DIEPINT_INEPNE_Pos) /*!< 0x00000040 */ -#define USB_OTG_DIEPINT_INEPNE USB_OTG_DIEPINT_INEPNE_Msk /*!< IN endpoint NAK effective */ -#define USB_OTG_DIEPINT_TXFE_Pos (7U) -#define USB_OTG_DIEPINT_TXFE_Msk (0x1UL << USB_OTG_DIEPINT_TXFE_Pos) /*!< 0x00000080 */ -#define USB_OTG_DIEPINT_TXFE USB_OTG_DIEPINT_TXFE_Msk /*!< Transmit FIFO empty */ -#define USB_OTG_DIEPINT_TXFIFOUDRN_Pos (8U) -#define USB_OTG_DIEPINT_TXFIFOUDRN_Msk (0x1UL << USB_OTG_DIEPINT_TXFIFOUDRN_Pos) /*!< 0x00000100 */ -#define USB_OTG_DIEPINT_TXFIFOUDRN USB_OTG_DIEPINT_TXFIFOUDRN_Msk /*!< Transmit Fifo Underrun */ -#define USB_OTG_DIEPINT_BNA_Pos (9U) -#define USB_OTG_DIEPINT_BNA_Msk (0x1UL << USB_OTG_DIEPINT_BNA_Pos) /*!< 0x00000200 */ -#define USB_OTG_DIEPINT_BNA USB_OTG_DIEPINT_BNA_Msk /*!< Buffer not available interrupt */ -#define USB_OTG_DIEPINT_PKTDRPSTS_Pos (11U) -#define USB_OTG_DIEPINT_PKTDRPSTS_Msk (0x1UL << USB_OTG_DIEPINT_PKTDRPSTS_Pos) /*!< 0x00000800 */ -#define USB_OTG_DIEPINT_PKTDRPSTS USB_OTG_DIEPINT_PKTDRPSTS_Msk /*!< Packet dropped status */ -#define USB_OTG_DIEPINT_BERR_Pos (12U) -#define USB_OTG_DIEPINT_BERR_Msk (0x1UL << USB_OTG_DIEPINT_BERR_Pos) /*!< 0x00001000 */ -#define USB_OTG_DIEPINT_BERR USB_OTG_DIEPINT_BERR_Msk /*!< Babble error interrupt */ -#define USB_OTG_DIEPINT_NAK_Pos (13U) -#define USB_OTG_DIEPINT_NAK_Msk (0x1UL << USB_OTG_DIEPINT_NAK_Pos) /*!< 0x00002000 */ -#define USB_OTG_DIEPINT_NAK USB_OTG_DIEPINT_NAK_Msk /*!< NAK interrupt */ - -/******************** Bit definition for USB_OTG_HCINTMSK register ********************/ -#define USB_OTG_HCINTMSK_XFRCM_Pos (0U) -#define USB_OTG_HCINTMSK_XFRCM_Msk (0x1UL << USB_OTG_HCINTMSK_XFRCM_Pos) /*!< 0x00000001 */ -#define USB_OTG_HCINTMSK_XFRCM USB_OTG_HCINTMSK_XFRCM_Msk /*!< Transfer completed mask */ -#define USB_OTG_HCINTMSK_CHHM_Pos (1U) -#define USB_OTG_HCINTMSK_CHHM_Msk (0x1UL << USB_OTG_HCINTMSK_CHHM_Pos) /*!< 0x00000002 */ -#define USB_OTG_HCINTMSK_CHHM USB_OTG_HCINTMSK_CHHM_Msk /*!< Channel halted mask */ -#define USB_OTG_HCINTMSK_AHBERR_Pos (2U) -#define USB_OTG_HCINTMSK_AHBERR_Msk (0x1UL << USB_OTG_HCINTMSK_AHBERR_Pos) /*!< 0x00000004 */ -#define USB_OTG_HCINTMSK_AHBERR USB_OTG_HCINTMSK_AHBERR_Msk /*!< AHB error */ -#define USB_OTG_HCINTMSK_STALLM_Pos (3U) -#define USB_OTG_HCINTMSK_STALLM_Msk (0x1UL << USB_OTG_HCINTMSK_STALLM_Pos) /*!< 0x00000008 */ -#define USB_OTG_HCINTMSK_STALLM USB_OTG_HCINTMSK_STALLM_Msk /*!< STALL response received interrupt mask */ -#define USB_OTG_HCINTMSK_NAKM_Pos (4U) -#define USB_OTG_HCINTMSK_NAKM_Msk (0x1UL << USB_OTG_HCINTMSK_NAKM_Pos) /*!< 0x00000010 */ -#define USB_OTG_HCINTMSK_NAKM USB_OTG_HCINTMSK_NAKM_Msk /*!< NAK response received interrupt mask */ -#define USB_OTG_HCINTMSK_ACKM_Pos (5U) -#define USB_OTG_HCINTMSK_ACKM_Msk (0x1UL << USB_OTG_HCINTMSK_ACKM_Pos) /*!< 0x00000020 */ -#define USB_OTG_HCINTMSK_ACKM USB_OTG_HCINTMSK_ACKM_Msk /*!< ACK response received/transmitted interrupt mask */ -#define USB_OTG_HCINTMSK_NYET_Pos (6U) -#define USB_OTG_HCINTMSK_NYET_Msk (0x1UL << USB_OTG_HCINTMSK_NYET_Pos) /*!< 0x00000040 */ -#define USB_OTG_HCINTMSK_NYET USB_OTG_HCINTMSK_NYET_Msk /*!< response received interrupt mask */ -#define USB_OTG_HCINTMSK_TXERRM_Pos (7U) -#define USB_OTG_HCINTMSK_TXERRM_Msk (0x1UL << USB_OTG_HCINTMSK_TXERRM_Pos) /*!< 0x00000080 */ -#define USB_OTG_HCINTMSK_TXERRM USB_OTG_HCINTMSK_TXERRM_Msk /*!< Transaction error mask */ -#define USB_OTG_HCINTMSK_BBERRM_Pos (8U) -#define USB_OTG_HCINTMSK_BBERRM_Msk (0x1UL << USB_OTG_HCINTMSK_BBERRM_Pos) /*!< 0x00000100 */ -#define USB_OTG_HCINTMSK_BBERRM USB_OTG_HCINTMSK_BBERRM_Msk /*!< Babble error mask */ -#define USB_OTG_HCINTMSK_FRMORM_Pos (9U) -#define USB_OTG_HCINTMSK_FRMORM_Msk (0x1UL << USB_OTG_HCINTMSK_FRMORM_Pos) /*!< 0x00000200 */ -#define USB_OTG_HCINTMSK_FRMORM USB_OTG_HCINTMSK_FRMORM_Msk /*!< Frame overrun mask */ -#define USB_OTG_HCINTMSK_DTERRM_Pos (10U) -#define USB_OTG_HCINTMSK_DTERRM_Msk (0x1UL << USB_OTG_HCINTMSK_DTERRM_Pos) /*!< 0x00000400 */ -#define USB_OTG_HCINTMSK_DTERRM USB_OTG_HCINTMSK_DTERRM_Msk /*!< Data toggle error mask */ - -/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/ - -#define USB_OTG_DIEPTSIZ_XFRSIZ_Pos (0U) -#define USB_OTG_DIEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << USB_OTG_DIEPTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */ -#define USB_OTG_DIEPTSIZ_XFRSIZ USB_OTG_DIEPTSIZ_XFRSIZ_Msk /*!< Transfer size */ -#define USB_OTG_DIEPTSIZ_PKTCNT_Pos (19U) -#define USB_OTG_DIEPTSIZ_PKTCNT_Msk (0x3FFUL << USB_OTG_DIEPTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */ -#define USB_OTG_DIEPTSIZ_PKTCNT USB_OTG_DIEPTSIZ_PKTCNT_Msk /*!< Packet count */ -#define USB_OTG_DIEPTSIZ_MULCNT_Pos (29U) -#define USB_OTG_DIEPTSIZ_MULCNT_Msk (0x3UL << USB_OTG_DIEPTSIZ_MULCNT_Pos) /*!< 0x60000000 */ -#define USB_OTG_DIEPTSIZ_MULCNT USB_OTG_DIEPTSIZ_MULCNT_Msk /*!< Packet count */ -/******************** Bit definition for USB_OTG_HCTSIZ register ********************/ -#define USB_OTG_HCTSIZ_XFRSIZ_Pos (0U) -#define USB_OTG_HCTSIZ_XFRSIZ_Msk (0x7FFFFUL << USB_OTG_HCTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */ -#define USB_OTG_HCTSIZ_XFRSIZ USB_OTG_HCTSIZ_XFRSIZ_Msk /*!< Transfer size */ -#define USB_OTG_HCTSIZ_PKTCNT_Pos (19U) -#define USB_OTG_HCTSIZ_PKTCNT_Msk (0x3FFUL << USB_OTG_HCTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */ -#define USB_OTG_HCTSIZ_PKTCNT USB_OTG_HCTSIZ_PKTCNT_Msk /*!< Packet count */ -#define USB_OTG_HCTSIZ_DOPING_Pos (31U) -#define USB_OTG_HCTSIZ_DOPING_Msk (0x1UL << USB_OTG_HCTSIZ_DOPING_Pos) /*!< 0x80000000 */ -#define USB_OTG_HCTSIZ_DOPING USB_OTG_HCTSIZ_DOPING_Msk /*!< Do PING */ -#define USB_OTG_HCTSIZ_DPID_Pos (29U) -#define USB_OTG_HCTSIZ_DPID_Msk (0x3UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x60000000 */ -#define USB_OTG_HCTSIZ_DPID USB_OTG_HCTSIZ_DPID_Msk /*!< Data PID */ -#define USB_OTG_HCTSIZ_DPID_0 (0x1UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x20000000 */ -#define USB_OTG_HCTSIZ_DPID_1 (0x2UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x40000000 */ - -/******************** Bit definition for USB_OTG_DIEPDMA register ********************/ -#define USB_OTG_DIEPDMA_DMAADDR_Pos (0U) -#define USB_OTG_DIEPDMA_DMAADDR_Msk (0xFFFFFFFFUL << USB_OTG_DIEPDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */ -#define USB_OTG_DIEPDMA_DMAADDR USB_OTG_DIEPDMA_DMAADDR_Msk /*!< DMA address */ - -/******************** Bit definition for USB_OTG_HCDMA register ********************/ -#define USB_OTG_HCDMA_DMAADDR_Pos (0U) -#define USB_OTG_HCDMA_DMAADDR_Msk (0xFFFFFFFFUL << USB_OTG_HCDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */ -#define USB_OTG_HCDMA_DMAADDR USB_OTG_HCDMA_DMAADDR_Msk /*!< DMA address */ - -/******************** Bit definition for USB_OTG_DTXFSTS register ********************/ -#define USB_OTG_DTXFSTS_INEPTFSAV_Pos (0U) -#define USB_OTG_DTXFSTS_INEPTFSAV_Msk (0xFFFFUL << USB_OTG_DTXFSTS_INEPTFSAV_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_DTXFSTS_INEPTFSAV USB_OTG_DTXFSTS_INEPTFSAV_Msk /*!< IN endpoint TxFIFO space available */ - -/******************** Bit definition for USB_OTG_DIEPTXF register ********************/ -#define USB_OTG_DIEPTXF_INEPTXSA_Pos (0U) -#define USB_OTG_DIEPTXF_INEPTXSA_Msk (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXSA_Pos) /*!< 0x0000FFFF */ -#define USB_OTG_DIEPTXF_INEPTXSA USB_OTG_DIEPTXF_INEPTXSA_Msk /*!< IN endpoint FIFOx transmit RAM start address */ -#define USB_OTG_DIEPTXF_INEPTXFD_Pos (16U) -#define USB_OTG_DIEPTXF_INEPTXFD_Msk (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXFD_Pos) /*!< 0xFFFF0000 */ -#define USB_OTG_DIEPTXF_INEPTXFD USB_OTG_DIEPTXF_INEPTXFD_Msk /*!< IN endpoint TxFIFO depth */ - -/******************** Bit definition for USB_OTG_DOEPCTL register ********************/ - -#define USB_OTG_DOEPCTL_MPSIZ_Pos (0U) -#define USB_OTG_DOEPCTL_MPSIZ_Msk (0x7FFUL << USB_OTG_DOEPCTL_MPSIZ_Pos) /*!< 0x000007FF */ -#define USB_OTG_DOEPCTL_MPSIZ USB_OTG_DOEPCTL_MPSIZ_Msk /*!< Maximum packet size */ /*! Date: Thu, 2 Nov 2023 15:22:02 +0700 Subject: [PATCH 41/82] skip tuh_max3421_spi_cs_api() in hcd_init() only call tuh_max3421_spi_cs_api() in SPI start/end transfer since Arduino port use this to call begin/endTransaction() --- src/portable/analog/max3421/hcd_max3421.c | 1 - 1 file changed, 1 deletion(-) diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 4665c1b06..65f87f7c6 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -417,7 +417,6 @@ bool hcd_init(uint8_t rhport) { (void) rhport; tuh_max3421_int_api(rhport, false); - tuh_max3421_spi_cs_api(rhport, false); TU_LOG2_INT(sizeof(max3421_ep_t)); TU_LOG2_INT(sizeof(max3421_data_t)); From 89475fcf26ccf0441faac1c5934abdad5f331488 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 Nov 2023 19:32:25 +0700 Subject: [PATCH 42/82] add unique id for u5, also allow to build with OPT_OS_CUSTOM --- hw/bsp/board_api.h | 3 +++ hw/bsp/stm32u5/family.c | 13 +++++++++++++ 2 files changed, 16 insertions(+) diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index a7dcabfcc..404509a28 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -97,6 +97,9 @@ static inline uint32_t board_millis(void) { return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); } +#elif CFG_TUSB_OS == OPT_OS_CUSTOM +// Implement your own board_millis() in any of .c file + #else #error "board_millis() is not implemented for this OS" #endif diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index d2287e9fc..d7258a717 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -210,6 +210,19 @@ uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); } +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t *stm32_uuid = (volatile uint32_t *) UID_BASE; + uint32_t *id32 = (uint32_t *) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = stm32_uuid[0]; + id32[1] = stm32_uuid[1]; + id32[2] = stm32_uuid[2]; + + return len; +} + int board_uart_read(uint8_t *buf, int len) { (void) buf; (void) len; From 2f2ccb33ed6fe3f40099ec529524611c6c1c507e Mon Sep 17 00:00:00 2001 From: Yveaux Date: Thu, 2 Nov 2023 17:06:16 +0100 Subject: [PATCH 43/82] Added end of file per ci recommendation --- library.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/library.json b/library.json index 4b7266dec..d637b528d 100644 --- a/library.json +++ b/library.json @@ -20,4 +20,4 @@ "homepage": "https://www.tinyusb.org/", "frameworks": "*", "platforms": "*" -} \ No newline at end of file +} From 4b9320e40ea65ca023925d0a644b116b7066e06f Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 Nov 2023 22:22:13 +0700 Subject: [PATCH 44/82] fix race condition when dev0 is removed while enumerating --- src/host/usbh.c | 70 ++++++++++--------- .../raspberrypi/pio_usb/hcd_pio_usb.c | 16 ++--- 2 files changed, 44 insertions(+), 42 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 8d75c9726..fb4fbe3cb 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -55,16 +55,12 @@ typedef struct uint8_t rhport; uint8_t hub_addr; uint8_t hub_port; - uint8_t speed; - // enumeration is in progress, done when all interfaces are configured - volatile uint8_t enumerating; - -// struct TU_ATTR_PACKED { -// uint8_t speed : 4; // packed speed to save footprint -// volatile uint8_t enumerating : 1; -// uint8_t TU_RESERVED : 3; -// }; + struct TU_ATTR_PACKED { + uint8_t speed : 4; // packed speed to save footprint + volatile uint8_t enumerating : 1; // enumeration is in progress, false if not connected or all interfaces are configured + uint8_t TU_RESERVED : 3; + }; } usbh_dev0_t; typedef struct { @@ -431,8 +427,8 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: - // due to the shared _usbh_ctrl_buf, we must complete enumerating - // one device before enumerating another one. + // due to the shared _usbh_ctrl_buf, we must complete enumerating one device before enumerating another one. + // TODO better to have an separated queue for newly attached devices if ( _dev0.enumerating ) { TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); @@ -556,11 +552,13 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { // EP0 with setup packet TU_VERIFY(xfer->ep_addr == 0 && xfer->setup); + // Check if device is still connected (enumerating for dev0) + uint8_t const daddr = xfer->daddr; + if ( daddr == 0 && !_dev0.enumerating) return false; + if ( daddr != 0 && get_device(daddr)->connected == 0) return false; + // pre-check to help reducing mutex lock TU_VERIFY(_ctrl_xfer.stage == CONTROL_STAGE_IDLE); - - uint8_t const daddr = xfer->daddr; - (void) osal_mutex_lock(_usbh_mutex, OSAL_TIMEOUT_WAIT_FOREVER); bool const is_idle = (_ctrl_xfer.stage == CONTROL_STAGE_IDLE); @@ -917,19 +915,23 @@ void hcd_devtree_get_info(uint8_t dev_addr, hcd_devtree_info_t* devtree_info) } } -TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) -{ - switch (event->event_id) - { -// case HCD_EVENT_DEVICE_REMOVE: -// // FIXME device remove from a hub need an HCD API for hcd to free up endpoint -// // mark device as removing to prevent further xfer before the event is processed in usbh task -// break; +TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) { + switch (event->event_id) { + case HCD_EVENT_DEVICE_REMOVE: + // FIXME device remove from a hub need an HCD API for hcd to free up endpoint + // mark device as removing to prevent further xfer before the event is processed in usbh task - default: - osal_queue_send(_usbh_q, event, in_isr); - break; + // Check if dev0 is removed + if ((event->rhport == _dev0.rhport) && (event->connection.hub_addr == _dev0.hub_addr) && + (event->connection.hub_port == _dev0.hub_port)) { + _dev0.enumerating = 0; + } + break; + + default: break; } + + osal_queue_send(_usbh_q, event, in_isr); } //--------------------------------------------------------------------+ @@ -1294,8 +1296,7 @@ static bool _parse_configuration_descriptor (uint8_t dev_addr, tusb_desc_configu static void enum_full_complete(void); // process device enumeration -static void process_enumeration(tuh_xfer_t* xfer) -{ +static void process_enumeration(tuh_xfer_t* xfer) { // Retry a few times with transfers in enumeration since device can be unstable when starting up enum { ATTEMPT_COUNT_MAX = 3, @@ -1303,19 +1304,20 @@ static void process_enumeration(tuh_xfer_t* xfer) }; static uint8_t failed_count = 0; - if (XFER_RESULT_SUCCESS != xfer->result) - { + if (XFER_RESULT_SUCCESS != xfer->result) { // retry if not reaching max attempt - if ( failed_count < ATTEMPT_COUNT_MAX ) - { + bool retry = _dev0.enumerating && (failed_count < ATTEMPT_COUNT_MAX); + if ( retry ) { failed_count++; osal_task_delay(ATTEMPT_DELAY_MS); // delay a bit TU_LOG1("Enumeration attempt %u\r\n", failed_count); - TU_ASSERT(tuh_control_xfer(xfer), ); - }else - { + retry = tuh_control_xfer(xfer); + } + + if (!retry) { enum_full_complete(); } + return; } failed_count = 0; diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 93bc1bf43..f4de3c51d 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -182,14 +182,6 @@ void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) { root_port_t *rport = PIO_USB_ROOT_PORT(root_id); uint32_t const ints = rport->ints; - if ( ints & PIO_USB_INTS_CONNECT_BITS ) { - hcd_event_device_attach(tu_rhport, true); - } - - if ( ints & PIO_USB_INTS_DISCONNECT_BITS ) { - hcd_event_device_remove(tu_rhport, true); - } - if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) { handle_endpoint_irq(rport, XFER_RESULT_SUCCESS, &rport->ep_complete); } @@ -202,6 +194,14 @@ void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) { handle_endpoint_irq(rport, XFER_RESULT_FAILED, &rport->ep_error); } + if ( ints & PIO_USB_INTS_CONNECT_BITS ) { + hcd_event_device_attach(tu_rhport, true); + } + + if ( ints & PIO_USB_INTS_DISCONNECT_BITS ) { + hcd_event_device_remove(tu_rhport, true); + } + // clear all rport->ints &= ~ints; } From 9377fd6901dd9c7b5361a9ce5c01a99cc6761750 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 Nov 2023 22:34:49 +0700 Subject: [PATCH 45/82] fix -Werror=null-dereference warning --- src/host/usbh.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index fb4fbe3cb..d8fff9905 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -554,8 +554,12 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { // Check if device is still connected (enumerating for dev0) uint8_t const daddr = xfer->daddr; - if ( daddr == 0 && !_dev0.enumerating) return false; - if ( daddr != 0 && get_device(daddr)->connected == 0) return false; + if ( daddr == 0 ) { + if (!_dev0.enumerating) return false; + } else { + usbh_device_t const* dev = get_device(daddr); + if (dev && dev->connected == 0) return false; + } // pre-check to help reducing mutex lock TU_VERIFY(_ctrl_xfer.stage == CONTROL_STAGE_IDLE); From d4be0fd10488646875acf253166503f2bdfb8263 Mon Sep 17 00:00:00 2001 From: jfm92 Date: Mon, 13 Nov 2023 10:14:55 +0100 Subject: [PATCH 46/82] Adding extern C to definitions to allow link on C++ project --- lib/networking/dhserver.h | 6 ++++++ lib/networking/dnserver.h | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/lib/networking/dhserver.h b/lib/networking/dhserver.h index b3642459a..b0d57ac4e 100644 --- a/lib/networking/dhserver.h +++ b/lib/networking/dhserver.h @@ -56,7 +56,13 @@ typedef struct dhcp_config dhcp_entry_t *entries; } dhcp_config_t; +#ifdef __cplusplus +extern "C" { +#endif err_t dhserv_init(const dhcp_config_t *config); void dhserv_free(void); +#ifdef __cplusplus +} +#endif #endif /* DHSERVER_H */ diff --git a/lib/networking/dnserver.h b/lib/networking/dnserver.h index 50b29be89..a7a7f9acb 100644 --- a/lib/networking/dnserver.h +++ b/lib/networking/dnserver.h @@ -41,7 +41,13 @@ typedef bool (*dns_query_proc_t)(const char *name, ip4_addr_t *addr); +#ifdef __cplusplus +extern "C" { +#endif err_t dnserv_init(const ip_addr_t *bind, uint16_t port, dns_query_proc_t query_proc); void dnserv_free(void); +#ifdef __cplusplus +} +#endif #endif From c9f09d6079cd483737ac15d9add4afac0dc74540 Mon Sep 17 00:00:00 2001 From: Jerzy Kasenberg Date: Mon, 13 Nov 2023 17:37:18 +0100 Subject: [PATCH 47/82] Add BSP for nucleo-g491re This adds bsp for ST nucleo-g491re board. This is mostly copy of nucleo-f474 only differences being: - PLL configured to 170MHz (not affecting USB which runs on HSI48) - Linker script freshly generated from STM32CubeIDE (smaller RAM) Signed-off-by: Jerzy Kasenberg --- .../stm32g491nucleo/STM32G491RETX_FLASH.ld | 185 ++++++++++++++++++ .../boards/stm32g491nucleo/board.cmake | 11 ++ hw/bsp/stm32g4/boards/stm32g491nucleo/board.h | 104 ++++++++++ .../stm32g4/boards/stm32g491nucleo/board.mk | 11 ++ 4 files changed, 311 insertions(+) create mode 100644 hw/bsp/stm32g4/boards/stm32g491nucleo/STM32G491RETX_FLASH.ld create mode 100644 hw/bsp/stm32g4/boards/stm32g491nucleo/board.cmake create mode 100644 hw/bsp/stm32g4/boards/stm32g491nucleo/board.h create mode 100644 hw/bsp/stm32g4/boards/stm32g491nucleo/board.mk diff --git a/hw/bsp/stm32g4/boards/stm32g491nucleo/STM32G491RETX_FLASH.ld b/hw/bsp/stm32g4/boards/stm32g491nucleo/STM32G491RETX_FLASH.ld new file mode 100644 index 000000000..f5553a112 --- /dev/null +++ b/hw/bsp/stm32g4/boards/stm32g491nucleo/STM32G491RETX_FLASH.ld @@ -0,0 +1,185 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for NUCLEO-G491RE Board embedding STM32G491RETx Device from stm32g4 series +** 512KBytes FLASH +** 112KBytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2023 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 112K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.cmake b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.cmake new file mode 100644 index 000000000..e37544499 --- /dev/null +++ b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.cmake @@ -0,0 +1,11 @@ +set(MCU_VARIANT stm32g491xx) +set(JLINK_DEVICE stm32g491re) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G491RETX_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32G491xx + HSE_VALUE=24000000 + ) +endfunction() diff --git a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h new file mode 100644 index 000000000..7dd4ed9ae --- /dev/null +++ b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h @@ -0,0 +1,104 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// G474RE Nucleo does not has usb connection. We need to manually connect +// - PA12 for D+, CN10.12 +// - PA11 for D-, CN10.14 + +// LED +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_5 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for STLink VCOM +#define UART_DEV LPUART1 +#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF12_LPUART1 +#define UART_TX_PIN GPIO_PIN_2 +#define UART_RX_PIN GPIO_PIN_3 + + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + // Configure the main internal regulator output voltage + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); + + // Initializes the CPU, AHB and APB buses clocks + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV6; + RCC_OscInitStruct.PLL.PLLN = 85; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + // Initializes the CPU, AHB and APB buses clocks + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ; +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.mk b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.mk new file mode 100644 index 000000000..c0f876331 --- /dev/null +++ b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.mk @@ -0,0 +1,11 @@ +MCU_VARIANT = stm32g491xx + +CFLAGS += \ + -DSTM32G491xx \ + -DHSE_VALUE=24000000 + +# Linker +LD_FILE_GCC = $(BOARD_PATH)/STM32G491RETX_FLASH.ld + +# For flash-jlink target +JLINK_DEVICE = stm32g491re From be325ca8bd14ec07c0d14ce759b98fb502eb1155 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 14 Nov 2023 11:00:59 +0100 Subject: [PATCH 48/82] Typo fix. --- examples/device/cdc_uac2/src/tusb_config.h | 8 ++++---- examples/device/uac2_headset/src/tusb_config.h | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 373f0b01f..93489cf62 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -151,11 +151,11 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT) +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) #define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 2 diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 1a3e23e95..b770483dc 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -151,11 +151,11 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT)*2 -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT)*2 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) #define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 2 From e0d632a954349229e934bbb00352581a9be2ef3b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Nov 2023 16:07:44 +0700 Subject: [PATCH 49/82] add ra2a1 ek also make some other changes --- .idea/cmake.xml | 52 +++++++----- hw/bsp/espressif/boards/family.c | 12 +-- hw/bsp/ra/boards/ra2a1_ek/board.cmake | 10 +++ hw/bsp/ra/boards/ra2a1_ek/board.h | 53 ++++++++++++ hw/bsp/ra/boards/ra2a1_ek/board.mk | 7 ++ .../ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h | 62 ++++++++++++++ .../ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 ++ .../fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 +++ .../ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 84 +++++++++++++++++++ .../boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h | 17 ++++ hw/bsp/ra/family.c | 3 + hw/bsp/ra/linker/gcc/ra2a1.ld | 22 +++++ .../stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- tools/cmake/cpu/cortex-m23.cmake | 17 ++++ 14 files changed, 326 insertions(+), 31 deletions(-) create mode 100644 hw/bsp/ra/boards/ra2a1_ek/board.cmake create mode 100644 hw/bsp/ra/boards/ra2a1_ek/board.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/board.mk create mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/linker/gcc/ra2a1.ld create mode 100644 tools/cmake/cpu/cortex-m23.cmake diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 1fd03e249..88e5b789c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,6 +2,15 @@ + + + + + + + + + @@ -16,15 +25,25 @@ - + - - + + + + + + + + + + + + @@ -34,38 +53,27 @@ - - - - - - - + + + + + + + + - - - - - - - - - - - - \ No newline at end of file diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 912ca5f35..2029295dc 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -38,9 +38,7 @@ #if ESP_IDF_VERSION_MAJOR > 4 #include "esp_private/periph_ctrl.h" #else - #include "driver/periph_ctrl.h" - #endif // Note; current code use UART0 can cause device to reset while monitoring @@ -48,18 +46,13 @@ #define UART_ID UART_NUM_0 #ifdef NEOPIXEL_PIN - #include "led_strip.h" - static led_strip_t* strip; #endif #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 - #include "driver/spi_master.h" - static void max3421_init(void); - #endif static void configure_pins(usb_hal_context_t* usb); @@ -152,7 +145,10 @@ static void configure_pins(usb_hal_context_t* usb) { } } -// Turn LED on or off +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + void board_led_write(bool state) { #ifdef NEOPIXEL_PIN strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00); diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.cmake b/hw/bsp/ra/boards/ra2a1_ek/board.cmake new file mode 100644 index 000000000..4d083ca98 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/board.cmake @@ -0,0 +1,10 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m23 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra2a1) + +set(JLINK_DEVICE R7FA2A1AB) + +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h new file mode 100644 index 000000000..c132387bc --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_06 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_01_PIN_05 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, + {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, + // USB FS D+, D-, VBus + {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.mk b/hw/bsp/ra/boards/ra2a1_ek/board.mk new file mode 100644 index 000000000..7a176418e --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/board.mk @@ -0,0 +1,7 @@ +CPU_CORE = cortex-m23 +MCU_VARIANT = ra2a1 + +# For flash-jlink target +JLINK_DEVICE = R7FA2A1AB + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..30637c17b --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else +#define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x400) +#define BSP_CFG_HEAP_BYTES (0x400) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..eb82f4697 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (2) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..710e85b28 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA2A1AB3CFM +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (64) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..6caef62cc --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" +#define BSP_MCU_GROUP_RA2A1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..cd9d135f7 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */ +#define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index fdf4c8666..16332be17 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -77,8 +77,11 @@ const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = { const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ + +#ifndef BSP_MCU_GROUP_RA2A1 [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1), /* USBFS FIFO 1 (DMA transfer request 1) */ +#endif #ifdef BOARD_HAS_USB_HIGHSPEED [4] = BSP_PRV_IELS_ENUM(EVENT_USBHS_USB_INT_RESUME), /* USBHS USB INT RESUME (USBHS interrupt) */ diff --git a/hw/bsp/ra/linker/gcc/ra2a1.ld b/hw/bsp/ra/linker/gcc/ra2a1.ld new file mode 100644 index 000000000..218acbb2a --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra2a1.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index 6a1f6c043..60aa739e2 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -59,7 +59,7 @@ #define configTICK_RATE_HZ ( 1000 ) #define configMAX_PRIORITIES ( 5 ) #define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) #define configMAX_TASK_NAME_LEN 16 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 diff --git a/tools/cmake/cpu/cortex-m23.cmake b/tools/cmake/cpu/cortex-m23.cmake new file mode 100644 index 000000000..3093dc99a --- /dev/null +++ b/tools/cmake/cpu/cortex-m23.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m23 + -mfloat-abi=soft + ) + + set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m23 + ) + + set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") + +endif () From 9ffb20429a6a55ca4f78257526a9486c646e1410 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 12:32:35 +0700 Subject: [PATCH 50/82] add metro m7 1011 sd with trace etm, try to enable but not working yet --- .idea/cmake.xml | 3 +- .../imxrt/boards/metro_m7_1011_sd/board.cmake | 15 + hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h | 53 ++ hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk | 17 + .../metro_m7_1011_sd/board/clock_config.c | 340 +++++++++ .../metro_m7_1011_sd/board/clock_config.h | 97 +++ .../evkmimxrt1010_flexspi_nor_config.c | 48 ++ .../evkmimxrt1010_flexspi_nor_config.h | 267 +++++++ .../metro_m7_1011_sd/metro_m7_1011_sd.ld | 270 +++++++ .../metro_m7_1011_sd/metro_m7_1011_sd.mex | 686 ++++++++++++++++++ .../ozone/metro_m7_1011_sd.jdebug | 215 ++++++ hw/bsp/imxrt/family.c | 12 +- 12 files changed, 2016 insertions(+), 7 deletions(-) create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 88e5b789c..73a479c32 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -44,7 +44,8 @@ - + + diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake new file mode 100644 index 000000000..99681ab12 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake @@ -0,0 +1,15 @@ +set(MCU_VARIANT MIMXRT1011) + +set(JLINK_DEVICE MIMXRT1011xxx5A) +set(PYOCD_TARGET mimxrt1010) +set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MIMXRT1011DAE5A + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h new file mode 100644 index 000000000..3c172ebb9 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (8*1024*1024) + +// LED +#define LED_PINMUX IOMUXC_GPIO_03_GPIOMUX_IO03 +#define LED_PORT GPIO1 +#define LED_PIN 3 +#define LED_STATE_ON 1 + +// D2 as button +#define BUTTON_PINMUX IOMUXC_GPIO_13_GPIOMUX_IO13 +#define BUTTON_PORT GPIO1 +#define BUTTON_PIN 13 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD +#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk new file mode 100644 index 000000000..b845194c2 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk @@ -0,0 +1,17 @@ +CFLAGS += -DCPU_MIMXRT1011DAE5A -DCFG_EXAMPLE_VIDEO_READONLY +MCU_VARIANT = MIMXRT1011 + +# LD file with uf2 +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1011xxx5A + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1010 + +# flash using pyocd +flash: flash-uf2 +flash-uf2: $(BUILD)/$(PROJECT).uf2 + @echo copying $< + @$(CP) $< /media/$(USER)/METROM7BOOT diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c new file mode 100644 index 000000000..1b28b668a --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c @@ -0,0 +1,340 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1011xxxxx +package_id: MIMXRT1011DAE5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1010-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: ADC_ALT_CLK.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz} +- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY_CLK.outFreq, value: 480 MHz} +settings: +- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true} +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true} +- {id: CCM.IPG_PODF.scale, value: '4'} +- {id: CCM.LPSPI_PODF.scale, value: '5'} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK} +- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK} +- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM_ANALOG.PLL2.denom, value: '1'} +- {id: CCM_ANALOG.PLL2.num, value: '0'} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = + { + .enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Xbar1); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Init Enet PLL. */ + CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 0); + CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0); +#endif + /* Disable ADC_ACLK_EN clock gate. */ + CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK; + /* Set ADC_ACLK_PODF. */ + CLOCK_SetDiv(kCLOCK_AdcDiv, 11); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18); +#endif + /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */ + /* Set Pll3 SW clock source to use the USB1 PLL output. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Set safe value of the AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 1); + /* Set periph clock2 clock source to use the PLL3_SW_CLK. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 18); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 18); + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h new file mode 100644 index 000000000..119fd94bd --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h @@ -0,0 +1,97 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 480000000UL + +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Enet PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c new file mode 100644 index 000000000..752a65629 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c @@ -0,0 +1,48 @@ +/* + * Copyright 2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1010_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 16u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 24), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 64u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h new file mode 100644 index 000000000..bb5a64448 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h @@ -0,0 +1,267 @@ +/* + * Copyright 2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ + +#include +#include +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related definitions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related definitions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP command execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld new file mode 100644 index 000000000..960fc6891 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld @@ -0,0 +1,270 @@ +/* +** ################################################################### +** Processors: MIMXRT1011CAE4A +** MIMXRT1011DAE5A +** +** Compiler: GNU C Compiler +** Reference manual: IMXRT1010RM Rev.0, 09/2019 +** Version: rev. 1.0, 2019-08-01 +** Build: b210709 +** +** Abstract: +** Linker file for the GNU C Compiler +** +** Copyright 2016 Freescale Semiconductor, Inc. +** Copyright 2016-2021 NXP +** All rights reserved. +** +** SPDX-License-Identifier: BSD-3-Clause +** +** http: www.nxp.com +** mail: support@nxp.com +** +** ################################################################### +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; +VECTOR_RAM_SIZE = DEFINED(__ram_vector_table__) ? 0x00000400 : 0; + +/* Specify the memory areas */ +MEMORY +{ + m_flash_config (RX) : ORIGIN = 0x60000400, LENGTH = 0x00000C00 + m_ivt (RX) : ORIGIN = 0x60001000, LENGTH = 0x00001000 + + m_interrupts (RX) : ORIGIN = 0x6000C000, LENGTH = 0x00000400 + m_text (RX) : ORIGIN = 0x6000C400, LENGTH = (8*1024*1024 - 0xC400) + m_qacode (RX) : ORIGIN = 0x00000000, LENGTH = 0x00008000 + m_data (RW) : ORIGIN = 0x20000000, LENGTH = 0x00008000 + m_data2 (RW) : ORIGIN = 0x20200000, LENGTH = 0x00010000 +} + +/* Define output sections */ +SECTIONS +{ + __NCACHE_REGION_START = ORIGIN(m_data2); + __NCACHE_REGION_SIZE = 0; + + .flash_config : + { + . = ALIGN(4); + __FLASH_BASE = .; + KEEP(* (.boot_hdr.conf)) /* flash config section */ + . = ALIGN(4); + } > m_flash_config + + ivt_begin = ORIGIN(m_flash_config) + LENGTH(m_flash_config); + + .ivt : AT(ivt_begin) + { + . = ALIGN(4); + KEEP(* (.boot_hdr.ivt)) /* ivt section */ + KEEP(* (.boot_hdr.boot_data)) /* boot section */ + KEEP(* (.boot_hdr.dcd_data)) /* dcd section */ + . = ALIGN(4); + } > m_ivt + + /* The startup code goes first into internal RAM */ + .interrupts : + { + __VECTOR_TABLE = .; + __Vectors = .; + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } > m_interrupts + + /* The program code and other data goes into internal RAM */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + } > m_text + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > m_text + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > m_text + + .ctors : + { + __CTOR_LIST__ = .; + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + } > m_text + + .dtors : + { + __DTOR_LIST__ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + } > m_text + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } > m_text + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } > m_text + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } > m_text + + __etext = .; /* define a global symbol at end of code */ + __DATA_ROM = .; /* Symbol is used by startup for data initialization */ + + .interrupts_ram : + { + . = ALIGN(4); + __VECTOR_RAM__ = .; + __interrupts_ram_start__ = .; /* Create a global symbol at data start */ + *(.m_interrupts_ram) /* This is a user defined section */ + . += VECTOR_RAM_SIZE; + . = ALIGN(4); + __interrupts_ram_end__ = .; /* Define a global symbol at data end */ + } > m_data + + __VECTOR_RAM = DEFINED(__ram_vector_table__) ? __VECTOR_RAM__ : ORIGIN(m_interrupts); + __RAM_VECTOR_TABLE_SIZE_BYTES = DEFINED(__ram_vector_table__) ? (__interrupts_ram_end__ - __interrupts_ram_start__) : 0x0; + + .data : AT(__DATA_ROM) + { + . = ALIGN(4); + __DATA_RAM = .; + __data_start__ = .; /* create a global symbol at data start */ + *(m_usb_dma_init_data) + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(DataQuickAccess) /* quick access data section */ + KEEP(*(.jcr*)) + . = ALIGN(4); + __data_end__ = .; /* define a global symbol at data end */ + } > m_data + + __ram_function_flash_start = __DATA_ROM + (__data_end__ - __data_start__); /* Symbol is used by startup for TCM data initialization */ + + .ram_function : AT(__ram_function_flash_start) + { + . = ALIGN(32); + __ram_function_start__ = .; + *(CodeQuickAccess) + . = ALIGN(128); + __ram_function_end__ = .; + } > m_qacode + + __NDATA_ROM = __ram_function_flash_start + (__ram_function_end__ - __ram_function_start__); + .ncache.init : AT(__NDATA_ROM) + { + __noncachedata_start__ = .; /* create a global symbol at ncache data start */ + *(NonCacheable.init) + . = ALIGN(4); + __noncachedata_init_end__ = .; /* create a global symbol at initialized ncache data end */ + } > m_data + . = __noncachedata_init_end__; + .ncache : + { + *(NonCacheable) + . = ALIGN(4); + __noncachedata_end__ = .; /* define a global symbol at ncache data end */ + } > m_data + + __DATA_END = __NDATA_ROM + (__noncachedata_init_end__ - __noncachedata_start__); + text_end = ORIGIN(m_text) + LENGTH(m_text); + ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") + + /* Uninitialized data section */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + . = ALIGN(4); + __START_BSS = .; + __bss_start__ = .; + *(m_usb_dma_noninit_data) + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + __END_BSS = .; + } > m_data + + .heap : + { + . = ALIGN(8); + __end__ = .; + PROVIDE(end = .); + __HeapBase = .; + . += HEAP_SIZE; + __HeapLimit = .; + __heap_limit = .; /* Add for _sbrk */ + } > m_data + + .stack : + { + . = ALIGN(8); + . += STACK_SIZE; + } > m_data + + /* Initializes stack on the end of block */ + __StackTop = ORIGIN(m_data) + LENGTH(m_data); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + .ARM.attributes 0 : { *(.ARM.attributes) } + + ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") +} diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex new file mode 100644 index 000000000..ef3ae4542 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex @@ -0,0 +1,686 @@ + + + + MIMXRT1011xxxxx + MIMXRT1011DAE5A + MIMXRT1010-EVK + A + ksdk2_0 + + + + + + + true + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + true + + + + + 2.5.1 + + + + + true + + + + + 2.0.1 + + + + + true + + + + + 2.0.3 + + + + + + + + + 13.0.2 + + + + + + + + + 0 + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug b/hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug new file mode 100644 index 000000000..90f9b77e5 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug @@ -0,0 +1,215 @@ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + Project.SetTraceSource ("Trace Pins"); + Project.SetTraceTiming (50, 50, 50, 50); + Project.SetDevice ("MIMXRT1011xxx4A"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("20 MHz"); + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M7F.svd"); + Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd"); + Project.AddSvdFile ("./MIMXRT1011.svd"); + + + // timing delay for trace pins in pico seconds, default is 2 nano seconds + + File.Open ("../../../../../../examples/cmake-build-metro-m7-1011-sd/device/cdc_msc/cdc_msc.elf"); +} + +/********************************************************************* +* +* TargetReset +* +* Function description +* Replaces the default target device reset routine. Optional. +* +* Notes +* This example demonstrates the usage when +* debugging a RAM program on a Cortex-M target device +* +********************************************************************** +*/ +//void TargetReset (void) { +// +// unsigned int SP; +// unsigned int PC; +// unsigned int VectorTableAddr; +// +// Exec.Reset(); +// +// VectorTableAddr = Elf.GetBaseAddr(); +// +// if (VectorTableAddr != 0xFFFFFFFF) { +// +// Util.Log("Resetting Program."); +// +// SP = Target.ReadU32(VectorTableAddr); +// Target.SetReg("SP", SP); +// +// PC = Target.ReadU32(VectorTableAddr + 4); +// Target.SetReg("PC", PC); +// } +//} + +/********************************************************************* +* +* BeforeTargetReset +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetReset (void) { +//} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetReset (void) { +} + +/********************************************************************* +* +* DebugStart +* +* Function description +* Replaces the default debug session startup routine. Optional. +* +********************************************************************** +*/ +//void DebugStart (void) { +//} + +/********************************************************************* +* +* TargetConnect +* +* Function description +* Replaces the default target IF connection routine. Optional. +* +********************************************************************** +*/ +//void TargetConnect (void) { +//} + +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ + +void BeforeTargetConnect (void) { + // + // Trace pin init is done by J-Link script file as J-Link script files are IDE independent + // + //Project.SetJLinkScript("./ST_STM32H743_Traceconfig.pex"); +} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 32d89f794..cfc98acad 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -93,12 +93,12 @@ void board_init(void) #ifdef TRACE_ETM // RT1011 ETM pins -// IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); -// CLOCK_EnableClock(kCLOCK_Trace); + IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); + CLOCK_EnableClock(kCLOCK_Trace); #endif // Enable IOCON clock From 2e924f727f9e2f414676e66cd942fd5423d1bd51 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 15:38:55 +0700 Subject: [PATCH 51/82] add imxrt1170 evkb --- examples/device/cdc_msc/src/main.c | 43 +- .../evkmimxrt1064_flexspi_nor_config.c | 2 +- .../imxrt/boards/mimxrt1170_evkb/board.cmake | 17 + hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h | 55 ++ hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk | 15 + .../mimxrt1170_evkb/board/clock_config.c | 877 ++++++++++++++++++ .../mimxrt1170_evkb/board/clock_config.h | 202 ++++ .../boards/mimxrt1170_evkb/board/pin_mux.c | 110 +++ .../boards/mimxrt1170_evkb/board/pin_mux.h | 77 ++ .../evkbmimxrt1170_flexspi_nor_config.c | 71 ++ .../evkbmimxrt1170_flexspi_nor_config.h | 270 ++++++ .../mimxrt1170_evkb/mimxrt1170_evkb.mex | 656 +++++++++++++ hw/bsp/imxrt/family.c | 95 +- hw/bsp/imxrt/family.cmake | 22 +- hw/bsp/imxrt/family.mk | 20 +- 15 files changed, 2439 insertions(+), 93 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 172f48ae0..0d3f97c8f 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -39,7 +39,7 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, BLINK_MOUNTED = 1000, BLINK_SUSPENDED = 2500, @@ -51,8 +51,7 @@ void led_blinking_task(void); void cdc_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port @@ -62,8 +61,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); @@ -76,29 +74,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ +void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -106,15 +100,13 @@ void tud_resume_cb(void) //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ -void cdc_task(void) -{ +void cdc_task(void) { // connected() check for DTR bit // Most but not all terminal client set this when making connection // if ( tud_cdc_connected() ) { // connected and there are data available - if ( tud_cdc_available() ) - { + if (tud_cdc_available()) { // read data char buf[64]; uint32_t count = tud_cdc_read(buf, sizeof(buf)); @@ -131,37 +123,32 @@ void cdc_task(void) } // Invoked when cdc when line state changed e.g connected/disconnected -void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) -{ +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { (void) itf; (void) rts; // TODO set some indicator - if ( dtr ) - { + if (dtr) { // Terminal connected - }else - { + } else { // Terminal disconnected } } // Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ +void tud_cdc_rx_cb(uint8_t itf) { (void) itf; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c index bfb1c2d59..9d30f26bd 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c @@ -17,7 +17,7 @@ ******************************************************************************/ #if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) #if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) +__attribute__((section(".boot_hdr.conf"), used)) #elif defined(__ICCARM__) #pragma location = ".boot_hdr.conf" #endif diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake new file mode 100644 index 000000000..692d9e498 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake @@ -0,0 +1,17 @@ +set(MCU_VARIANT MIMXRT1176) +set(MCU_CORE _cm7) + +set(JLINK_DEVICE MIMXRT1176xxxA_M7) +set(PYOCD_TARGET mimxrt1170_cm7) +set(NXPLINK_DEVICE MIMXRT1176xxxxx:MIMXRT1170-EVK) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkbmimxrt1170_flexspi_nor_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MIMXRT1176DVMAA_cm7 + BOARD_TUD_RHPORT=0 + BOARD_TUH_RHPORT=1 + ) +endfunction() diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h new file mode 100644 index 000000000..0ff82e131 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h @@ -0,0 +1,55 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x1000000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_04_GPIO9_IO03 +#define LED_PORT GPIO9 +#define LED_PIN 3 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_WAKEUP_DIG_GPIO13_IO00 +#define BUTTON_PORT GPIO13 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +static inline uint32_t board_uart_get_clock(void) { + return CLOCK_GetRootClockFreq(kCLOCK_Root_Lpuart1); +} + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk new file mode 100644 index 000000000..e8500a4c9 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk @@ -0,0 +1,15 @@ +CFLAGS += -DCPU_MIMXRT1176DVMAA_cm7 +MCU_VARIANT = MIMXRT1176 +MCU_CORE = _cm7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1176xxxA_M7 + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1170_cm7 + +BOARD_TUD_RHPORT = 0 +BOARD_TUH_RHPORT = 1 + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c new file mode 100644 index 000000000..b9953a456 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c @@ -0,0 +1,877 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetRootClock() to configure corresponding module clock source and divider. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1176xxxxx +package_id: MIMXRT1176DVMAA +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1170-EVKB + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" +#include "fsl_dcdc.h" +#include "fsl_pmu.h" +#include "fsl_clock.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) +/* This function should not run from SDRAM since it will change SEMC configuration. */ +AT_QUICKACCESS_SECTION_CODE(void UpdateSemcClock(void)); +void UpdateSemcClock(void) +{ + /* Enable self-refresh mode and update semc clock root to 200MHz. */ + SEMC->IPCMD = 0xA55A000D; + while ((SEMC->INTR & 0x3) == 0) + ; + SEMC->INTR = 0x3; + SEMC->DCCR = 0x0B; + /* + * Currently we are using SEMC parameter which fit both 166MHz and 200MHz, only + * need to change the SEMC clock root here. If customer is using their own DCD and + * want to switch from 166MHz to 200MHz, extra SEMC configuration might need to be + * adjusted here to fine tune the SDRAM performance + */ + CCM->CLOCK_ROOT[kCLOCK_Root_Semc].CONTROL = 0x602; +} +#endif +#endif + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: ACMP_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ADC1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ADC2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ARM_PLL_CLK.outFreq, value: 996 MHz} +- {id: ASRC_CLK_ROOT.outFreq, value: 24 MHz} +- {id: AXI_CLK_ROOT.outFreq, value: 996 MHz} +- {id: BUS_CLK_ROOT.outFreq, value: 240 MHz} +- {id: BUS_LPSR_CLK_ROOT.outFreq, value: 160 MHz} +- {id: CAN1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CAN2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CAN3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CCM_CLKO1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CCM_CLKO2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CSI2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CSI2_ESC_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CSI2_UI_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CSI_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CSSYS_CLK_ROOT.outFreq, value: 24 MHz} +- {id: CSTRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: ELCDIF_CLK_ROOT.outFreq, value: 24 MHz} +- {id: EMV1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: EMV2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET_1G_TX_CLK.outFreq, value: 24 MHz} +- {id: ENET_25M_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET_QOS_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET_TIMER1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET_TIMER2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: ENET_TIMER3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: FLEXIO2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: FLEXSPI1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GC355_CLK_ROOT.outFreq, value: 492.0000125 MHz} +- {id: GPT1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 24 MHz} +- {id: GPT2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 24 MHz} +- {id: GPT3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GPT3_ipg_clk_highfreq.outFreq, value: 24 MHz} +- {id: GPT4_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GPT4_ipg_clk_highfreq.outFreq, value: 24 MHz} +- {id: GPT5_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GPT5_ipg_clk_highfreq.outFreq, value: 24 MHz} +- {id: GPT6_CLK_ROOT.outFreq, value: 24 MHz} +- {id: GPT6_ipg_clk_highfreq.outFreq, value: 24 MHz} +- {id: LCDIFV2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPI2C1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPI2C2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPI2C3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPI2C4_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPI2C5_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPI2C6_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPSPI1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPSPI2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPSPI3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPSPI4_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPSPI5_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPSPI6_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART10_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART11_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART12_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART4_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART5_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART6_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART7_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART8_CLK_ROOT.outFreq, value: 24 MHz} +- {id: LPUART9_CLK_ROOT.outFreq, value: 24 MHz} +- {id: M4_CLK_ROOT.outFreq, value: 4320/11 MHz} +- {id: M4_SYSTICK_CLK_ROOT.outFreq, value: 24 MHz} +- {id: M7_CLK_ROOT.outFreq, value: 996 MHz} +- {id: M7_SYSTICK_CLK_ROOT.outFreq, value: 100 kHz} +- {id: MIC_CLK_ROOT.outFreq, value: 24 MHz} +- {id: MIPI_DSI_TX_CLK_ESC_ROOT.outFreq, value: 24 MHz} +- {id: MIPI_ESC_CLK_ROOT.outFreq, value: 24 MHz} +- {id: MIPI_REF_CLK_ROOT.outFreq, value: 24 MHz} +- {id: MQS_CLK_ROOT.outFreq, value: 24 MHz} +- {id: MQS_MCLK.outFreq, value: 24 MHz} +- {id: OSC_24M.outFreq, value: 24 MHz} +- {id: OSC_32K.outFreq, value: 32.768 kHz} +- {id: OSC_RC_16M.outFreq, value: 16 MHz} +- {id: OSC_RC_400M.outFreq, value: 400 MHz} +- {id: OSC_RC_48M.outFreq, value: 48 MHz} +- {id: OSC_RC_48M_DIV2.outFreq, value: 24 MHz} +- {id: PLL_VIDEO_CLK.outFreq, value: 984.000025 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: SAI1_MCLK1.outFreq, value: 24 MHz} +- {id: SAI1_MCLK3.outFreq, value: 24 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 24 MHz} +- {id: SAI2_MCLK1.outFreq, value: 24 MHz} +- {id: SAI2_MCLK3.outFreq, value: 24 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 24 MHz} +- {id: SAI3_MCLK1.outFreq, value: 24 MHz} +- {id: SAI3_MCLK3.outFreq, value: 24 MHz} +- {id: SAI4_CLK_ROOT.outFreq, value: 24 MHz} +- {id: SAI4_MCLK1.outFreq, value: 24 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 198 MHz} +- {id: SPDIF_CLK_ROOT.outFreq, value: 24 MHz} +- {id: SYS_PLL2_CLK.outFreq, value: 528 MHz} +- {id: SYS_PLL2_PFD0_CLK.outFreq, value: 352 MHz} +- {id: SYS_PLL2_PFD1_CLK.outFreq, value: 594 MHz} +- {id: SYS_PLL2_PFD2_CLK.outFreq, value: 396 MHz} +- {id: SYS_PLL2_PFD3_CLK.outFreq, value: 297 MHz} +- {id: SYS_PLL3_CLK.outFreq, value: 480 MHz} +- {id: SYS_PLL3_DIV2_CLK.outFreq, value: 240 MHz} +- {id: SYS_PLL3_PFD0_CLK.outFreq, value: 8640/13 MHz} +- {id: SYS_PLL3_PFD1_CLK.outFreq, value: 8640/17 MHz} +- {id: SYS_PLL3_PFD2_CLK.outFreq, value: 270 MHz} +- {id: SYS_PLL3_PFD3_CLK.outFreq, value: 4320/11 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 24 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 24 MHz} +settings: +- {id: CoreBusClockRootsInitializationConfig, value: selectedCore} +- {id: SOCDomainVoltage, value: OD} +- {id: ANADIG_OSC_OSC_24M_CTRL_LP_EN_CFG, value: Low} +- {id: ANADIG_OSC_OSC_24M_CTRL_OSC_EN_CFG, value: Enabled} +- {id: ANADIG_PLL.PLL_AUDIO_BYPASS.sel, value: ANADIG_OSC.OSC_24M} +- {id: ANADIG_PLL.PLL_VIDEO.denom, value: '960000'} +- {id: ANADIG_PLL.PLL_VIDEO.div, value: '41'} +- {id: ANADIG_PLL.PLL_VIDEO.num, value: '1'} +- {id: ANADIG_PLL.SYS_PLL1_BYPASS.sel, value: ANADIG_OSC.OSC_24M} +- {id: ANADIG_PLL.SYS_PLL2.denom, value: '268435455'} +- {id: ANADIG_PLL.SYS_PLL2.div, value: '22'} +- {id: ANADIG_PLL.SYS_PLL2.num, value: '0'} +- {id: ANADIG_PLL.SYS_PLL2_SS_DIV.scale, value: '268435455'} +- {id: ANADIG_PLL.SYS_PLL3_PFD3_DIV.scale, value: '22', locked: true} +- {id: ANADIG_PLL.SYS_PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: ANADIG_PLL_ARM_PLL_CTRL_POWERUP_CFG, value: Enabled} +- {id: ANADIG_PLL_PLL_AUDIO_CTRL_GATE_CFG, value: Disabled} +- {id: ANADIG_PLL_PLL_VIDEO_CTRL0_POWERUP_CFG, value: Enabled} +- {id: ANADIG_PLL_SYS_PLL1_CTRL0_POWERUP_CFG, value: Disabled} +- {id: ANADIG_PLL_SYS_PLL1_CTRL_GATE_CFG, value: Disabled} +- {id: ANADIG_PLL_SYS_PLL2_CTRL_POWERUP_CFG, value: Enabled} +- {id: ANADIG_PLL_SYS_PLL3_CTRL_POWERUP_CFG, value: Enabled} +- {id: ANADIG_PLL_SYS_PLL3_CTRL_SYS_PLL3_DIV2_CFG, value: Enabled} +- {id: CCM.CLOCK_ROOT0.MUX.sel, value: ANADIG_PLL.ARM_PLL_CLK} +- {id: CCM.CLOCK_ROOT1.MUX.sel, value: ANADIG_PLL.SYS_PLL3_PFD3_CLK} +- {id: CCM.CLOCK_ROOT2.DIV.scale, value: '2'} +- {id: CCM.CLOCK_ROOT2.MUX.sel, value: ANADIG_PLL.SYS_PLL3_CLK} +- {id: CCM.CLOCK_ROOT25.DIV.scale, value: '22'} +- {id: CCM.CLOCK_ROOT25.MUX.sel, value: ANADIG_PLL.SYS_PLL2_CLK} +- {id: CCM.CLOCK_ROOT26.DIV.scale, value: '22'} +- {id: CCM.CLOCK_ROOT26.MUX.sel, value: ANADIG_PLL.SYS_PLL2_CLK} +- {id: CCM.CLOCK_ROOT3.DIV.scale, value: '3'} +- {id: CCM.CLOCK_ROOT3.MUX.sel, value: ANADIG_PLL.SYS_PLL3_CLK} +- {id: CCM.CLOCK_ROOT4.DIV.scale, value: '3'} +- {id: CCM.CLOCK_ROOT4.MUX.sel, value: ANADIG_PLL.SYS_PLL2_PFD1_CLK} +- {id: CCM.CLOCK_ROOT6.DIV.scale, value: '4'} +- {id: CCM.CLOCK_ROOT6.MUX.sel, value: ANADIG_PLL.SYS_PLL2_CLK} +- {id: CCM.CLOCK_ROOT68.DIV.scale, value: '2'} +- {id: CCM.CLOCK_ROOT68.MUX.sel, value: ANADIG_PLL.PLL_VIDEO_CLK} +- {id: CCM.CLOCK_ROOT8.DIV.scale, value: '240'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ + +#ifndef SKIP_POWER_ADJUSTMENT +#if __CORTEX_M == 7 +#define BYPASS_LDO_LPSR 1 +#define SKIP_LDO_ADJUSTMENT 1 +#elif __CORTEX_M == 4 +#define SKIP_DCDC_ADJUSTMENT 1 +#define SKIP_FBB_ENABLE 1 +#endif +#endif + +const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN = + { + .postDivider = kCLOCK_PllPostDiv2, /* Post divider, 0 - DIV by 2, 1 - DIV by 4, 2 - DIV by 8, 3 - DIV by 1 */ + .loopDivider = 166, /* PLL Loop divider, Fout = Fin * ( loopDivider / ( 2 * postDivider ) ) */ + }; + +const clock_sys_pll2_config_t sysPll2Config_BOARD_BootClockRUN = + { + .mfd = 268435455, /* Denominator of spread spectrum */ + .ss = NULL, /* Spread spectrum parameter */ + .ssEnable = false, /* Enable spread spectrum or not */ + }; + +const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 41, /* PLL Loop divider, valid range for DIV_SELECT divider value: 27 ~ 54. */ + .postDivider = 0, /* Divider after PLL, should only be 1, 2, 4, 8, 16, 32 */ + .numerator = 1, /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .denominator = 960000, /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .ss = NULL, /* Spread spectrum parameter */ + .ssEnable = false, /* Enable spread spectrum or not */ + }; + +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + clock_root_config_t rootCfg = {0}; + + /* Set DCDC to DCM mode to improve the efficiency for light loading in run mode and transient performance with a big loading step. */ + DCDC_BootIntoDCM(DCDC); + +#if !defined(SKIP_DCDC_ADJUSTMENT) || (!SKIP_DCDC_ADJUSTMENT) + if((OCOTP->FUSEN[16].FUSE == 0x57AC5969U) && ((OCOTP->FUSEN[17].FUSE & 0xFFU) == 0x0BU)) + { + DCDC_SetVDD1P0BuckModeTargetVoltage(DCDC, kDCDC_1P0BuckTarget1P15V); + } + else + { + /* Set 1.125V for production samples to align with data sheet requirement */ + DCDC_SetVDD1P0BuckModeTargetVoltage(DCDC, kDCDC_1P0BuckTarget1P125V); + } +#endif + +#if !defined(SKIP_FBB_ENABLE) || (!SKIP_FBB_ENABLE) + /* Check if FBB need to be enabled in OverDrive(OD) mode */ + if(((OCOTP->FUSEN[7].FUSE & 0x10U) >> 4U) != 1) + { + PMU_EnableBodyBias(ANADIG_PMU, kPMU_FBB_CM7, true); + } + else + { + PMU_EnableBodyBias(ANADIG_PMU, kPMU_FBB_CM7, false); + } +#endif + +#if defined(BYPASS_LDO_LPSR) && BYPASS_LDO_LPSR + PMU_StaticEnableLpsrAnaLdoBypassMode(ANADIG_LDO_SNVS, true); + PMU_StaticEnableLpsrDigLdoBypassMode(ANADIG_LDO_SNVS, true); +#endif + +#if !defined(SKIP_LDO_ADJUSTMENT) || (!SKIP_LDO_ADJUSTMENT) + pmu_static_lpsr_ana_ldo_config_t lpsrAnaConfig; + pmu_static_lpsr_dig_config_t lpsrDigConfig; + + if((ANADIG_LDO_SNVS->PMU_LDO_LPSR_ANA & ANADIG_LDO_SNVS_PMU_LDO_LPSR_ANA_BYPASS_MODE_EN_MASK) == 0UL) + { + PMU_StaticGetLpsrAnaLdoDefaultConfig(&lpsrAnaConfig); + PMU_StaticLpsrAnaLdoInit(ANADIG_LDO_SNVS, &lpsrAnaConfig); + } + + if((ANADIG_LDO_SNVS->PMU_LDO_LPSR_DIG & ANADIG_LDO_SNVS_PMU_LDO_LPSR_DIG_BYPASS_MODE_MASK) == 0UL) + { + PMU_StaticGetLpsrDigLdoDefaultConfig(&lpsrDigConfig); + lpsrDigConfig.targetVoltage = kPMU_LpsrDigTargetStableVoltage1P117V; + PMU_StaticLpsrDigLdoInit(ANADIG_LDO_SNVS, &lpsrDigConfig); + } +#endif + + /* Config CLK_1M */ + CLOCK_OSC_Set1MHzOutputBehavior(kCLOCK_1MHzOutEnableFreeRunning1Mhz); + + /* Init OSC RC 16M */ + ANADIG_OSC->OSC_16M_CTRL |= ANADIG_OSC_OSC_16M_CTRL_EN_IRC4M16M_MASK; + + /* Init OSC RC 400M */ + CLOCK_OSC_EnableOscRc400M(); + CLOCK_OSC_GateOscRc400M(true); + + /* Init OSC RC 48M */ + CLOCK_OSC_EnableOsc48M(true); + CLOCK_OSC_EnableOsc48MDiv2(true); + + /* Config OSC 24M */ + ANADIG_OSC->OSC_24M_CTRL |= ANADIG_OSC_OSC_24M_CTRL_OSC_EN(1) | ANADIG_OSC_OSC_24M_CTRL_BYPASS_EN(0) | ANADIG_OSC_OSC_24M_CTRL_BYPASS_CLK(0) | ANADIG_OSC_OSC_24M_CTRL_LP_EN(1) | ANADIG_OSC_OSC_24M_CTRL_OSC_24M_GATE(0); + /* Wait for 24M OSC to be stable. */ + while (ANADIG_OSC_OSC_24M_CTRL_OSC_24M_STABLE_MASK != + (ANADIG_OSC->OSC_24M_CTRL & ANADIG_OSC_OSC_24M_CTRL_OSC_24M_STABLE_MASK)) + { + } + + /* Switch both core, M7 Systick and Bus_Lpsr to OscRC48MDiv2 first */ +#if __CORTEX_M == 7 + rootCfg.mux = kCLOCK_M7_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_M7, &rootCfg); + + rootCfg.mux = kCLOCK_M7_SYSTICK_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_M7_Systick, &rootCfg); +#endif + +#if __CORTEX_M == 4 + rootCfg.mux = kCLOCK_M4_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_M4, &rootCfg); + + rootCfg.mux = kCLOCK_BUS_LPSR_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Bus_Lpsr, &rootCfg); +#endif + + /* + * if DCD is used, please make sure the clock source of SEMC is not changed in the following PLL/PFD configuration code. + */ + /* Init Arm Pll. */ + CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN); + + /* Bypass Sys Pll1. */ + CLOCK_SetPllBypass(kCLOCK_PllSys1, true); + + /* DeInit Sys Pll1. */ + CLOCK_DeinitSysPll1(); + + /* Init Sys Pll2. */ + CLOCK_InitSysPll2(&sysPll2Config_BOARD_BootClockRUN); + + /* Init System Pll2 pfd0. */ + CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd0, 27); + + /* Init System Pll2 pfd1. */ + CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd1, 16); + + /* Init System Pll2 pfd2. */ + CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd2, 24); + + /* Init System Pll2 pfd3. */ + CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd3, 32); + + /* Init Sys Pll3. */ + CLOCK_InitSysPll3(); + + /* Init System Pll3 pfd0. */ + CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd0, 13); + + /* Init System Pll3 pfd1. */ + CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd1, 17); + + /* Init System Pll3 pfd2. */ + CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd2, 32); + + /* Init System Pll3 pfd3. */ + CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd3, 22); + + /* Bypass Audio Pll. */ + CLOCK_SetPllBypass(kCLOCK_PllAudio, true); + + /* DeInit Audio Pll. */ + CLOCK_DeinitAudioPll(); + + /* Init Video Pll. */ + CLOCK_InitVideoPll(&videoPllConfig_BOARD_BootClockRUN); + + /* Module clock root configurations. */ + /* Configure M7 using ARM_PLL_CLK */ +#if __CORTEX_M == 7 + rootCfg.mux = kCLOCK_M7_ClockRoot_MuxArmPllOut; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_M7, &rootCfg); +#endif + + /* Configure M4 using SYS_PLL3_PFD3_CLK */ +#if __CORTEX_M == 4 + rootCfg.mux = kCLOCK_M4_ClockRoot_MuxSysPll3Pfd3; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_M4, &rootCfg); +#endif + + /* Configure BUS using SYS_PLL3_CLK */ + rootCfg.mux = kCLOCK_BUS_ClockRoot_MuxSysPll3Out; + rootCfg.div = 2; + CLOCK_SetRootClock(kCLOCK_Root_Bus, &rootCfg); + + /* Configure BUS_LPSR using SYS_PLL3_CLK */ + rootCfg.mux = kCLOCK_BUS_LPSR_ClockRoot_MuxSysPll3Out; + rootCfg.div = 3; + CLOCK_SetRootClock(kCLOCK_Root_Bus_Lpsr, &rootCfg); + + /* Configure SEMC using SYS_PLL2_PFD1_CLK */ +#ifndef SKIP_SEMC_INIT + rootCfg.mux = kCLOCK_SEMC_ClockRoot_MuxSysPll2Pfd1; + rootCfg.div = 3; + CLOCK_SetRootClock(kCLOCK_Root_Semc, &rootCfg); +#endif + +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + UpdateSemcClock(); +#endif +#endif + + /* Configure CSSYS using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CSSYS_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Cssys, &rootCfg); + + /* Configure CSTRACE using SYS_PLL2_CLK */ + rootCfg.mux = kCLOCK_CSTRACE_ClockRoot_MuxSysPll2Out; + rootCfg.div = 4; + CLOCK_SetRootClock(kCLOCK_Root_Cstrace, &rootCfg); + + /* Configure M4_SYSTICK using OSC_RC_48M_DIV2 */ +#if __CORTEX_M == 4 + rootCfg.mux = kCLOCK_M4_SYSTICK_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_M4_Systick, &rootCfg); +#endif + + /* Configure M7_SYSTICK using OSC_RC_48M_DIV2 */ +#if __CORTEX_M == 7 + rootCfg.mux = kCLOCK_M7_SYSTICK_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 240; + CLOCK_SetRootClock(kCLOCK_Root_M7_Systick, &rootCfg); +#endif + + /* Configure ADC1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ADC1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Adc1, &rootCfg); + + /* Configure ADC2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ADC2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Adc2, &rootCfg); + + /* Configure ACMP using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ACMP_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Acmp, &rootCfg); + + /* Configure FLEXIO1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_FLEXIO1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Flexio1, &rootCfg); + + /* Configure FLEXIO2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_FLEXIO2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Flexio2, &rootCfg); + + /* Configure GPT1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_GPT1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Gpt1, &rootCfg); + + /* Configure GPT2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_GPT2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Gpt2, &rootCfg); + + /* Configure GPT3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_GPT3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Gpt3, &rootCfg); + + /* Configure GPT4 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_GPT4_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Gpt4, &rootCfg); + + /* Configure GPT5 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_GPT5_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Gpt5, &rootCfg); + + /* Configure GPT6 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_GPT6_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Gpt6, &rootCfg); + + /* Configure FLEXSPI1 using OSC_RC_48M_DIV2 */ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1) || defined(FLEXSPI_IN_USE)) + rootCfg.mux = kCLOCK_FLEXSPI1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Flexspi1, &rootCfg); +#endif + + /* Configure FLEXSPI2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_FLEXSPI2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Flexspi2, &rootCfg); + + /* Configure CAN1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CAN1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Can1, &rootCfg); + + /* Configure CAN2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CAN2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Can2, &rootCfg); + + /* Configure CAN3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CAN3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Can3, &rootCfg); + + /* Configure LPUART1 using SYS_PLL2_CLK */ + rootCfg.mux = kCLOCK_LPUART1_ClockRoot_MuxSysPll2Out; + rootCfg.div = 22; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart1, &rootCfg); + + /* Configure LPUART2 using SYS_PLL2_CLK */ + rootCfg.mux = kCLOCK_LPUART2_ClockRoot_MuxSysPll2Out; + rootCfg.div = 22; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart2, &rootCfg); + + /* Configure LPUART3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart3, &rootCfg); + + /* Configure LPUART4 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART4_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart4, &rootCfg); + + /* Configure LPUART5 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART5_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart5, &rootCfg); + + /* Configure LPUART6 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART6_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart6, &rootCfg); + + /* Configure LPUART7 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART7_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart7, &rootCfg); + + /* Configure LPUART8 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART8_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart8, &rootCfg); + + /* Configure LPUART9 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART9_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart9, &rootCfg); + + /* Configure LPUART10 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART10_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart10, &rootCfg); + + /* Configure LPUART11 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART11_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart11, &rootCfg); + + /* Configure LPUART12 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPUART12_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpuart12, &rootCfg); + + /* Configure LPI2C1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPI2C1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpi2c1, &rootCfg); + + /* Configure LPI2C2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPI2C2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpi2c2, &rootCfg); + + /* Configure LPI2C3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPI2C3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpi2c3, &rootCfg); + + /* Configure LPI2C4 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPI2C4_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpi2c4, &rootCfg); + + /* Configure LPI2C5 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPI2C5_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpi2c5, &rootCfg); + + /* Configure LPI2C6 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPI2C6_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpi2c6, &rootCfg); + + /* Configure LPSPI1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPSPI1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpspi1, &rootCfg); + + /* Configure LPSPI2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPSPI2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpspi2, &rootCfg); + + /* Configure LPSPI3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPSPI3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpspi3, &rootCfg); + + /* Configure LPSPI4 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPSPI4_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpspi4, &rootCfg); + + /* Configure LPSPI5 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPSPI5_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpspi5, &rootCfg); + + /* Configure LPSPI6 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LPSPI6_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lpspi6, &rootCfg); + + /* Configure EMV1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_EMV1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Emv1, &rootCfg); + + /* Configure EMV2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_EMV2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Emv2, &rootCfg); + + /* Configure ENET1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet1, &rootCfg); + + /* Configure ENET2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet2, &rootCfg); + + /* Configure ENET_QOS using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET_QOS_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet_Qos, &rootCfg); + + /* Configure ENET_25M using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET_25M_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet_25m, &rootCfg); + + /* Configure ENET_TIMER1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET_TIMER1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet_Timer1, &rootCfg); + + /* Configure ENET_TIMER2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET_TIMER2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet_Timer2, &rootCfg); + + /* Configure ENET_TIMER3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ENET_TIMER3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Enet_Timer3, &rootCfg); + + /* Configure USDHC1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_USDHC1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Usdhc1, &rootCfg); + + /* Configure USDHC2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_USDHC2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Usdhc2, &rootCfg); + + /* Configure ASRC using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_ASRC_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Asrc, &rootCfg); + + /* Configure MQS using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_MQS_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Mqs, &rootCfg); + + /* Configure MIC using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_MIC_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Mic, &rootCfg); + + /* Configure SPDIF using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_SPDIF_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Spdif, &rootCfg); + + /* Configure SAI1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_SAI1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Sai1, &rootCfg); + + /* Configure SAI2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_SAI2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Sai2, &rootCfg); + + /* Configure SAI3 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_SAI3_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Sai3, &rootCfg); + + /* Configure SAI4 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_SAI4_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Sai4, &rootCfg); + + /* Configure GC355 using PLL_VIDEO_CLK */ + rootCfg.mux = kCLOCK_GC355_ClockRoot_MuxVideoPllOut; + rootCfg.div = 2; + CLOCK_SetRootClock(kCLOCK_Root_Gc355, &rootCfg); + + /* Configure LCDIF using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LCDIF_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lcdif, &rootCfg); + + /* Configure LCDIFV2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_LCDIFV2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Lcdifv2, &rootCfg); + + /* Configure MIPI_REF using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_MIPI_REF_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Mipi_Ref, &rootCfg); + + /* Configure MIPI_ESC using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_MIPI_ESC_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Mipi_Esc, &rootCfg); + + /* Configure CSI2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CSI2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Csi2, &rootCfg); + + /* Configure CSI2_ESC using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CSI2_ESC_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Csi2_Esc, &rootCfg); + + /* Configure CSI2_UI using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CSI2_UI_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Csi2_Ui, &rootCfg); + + /* Configure CSI using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CSI_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Csi, &rootCfg); + + /* Configure CKO1 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CKO1_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Cko1, &rootCfg); + + /* Configure CKO2 using OSC_RC_48M_DIV2 */ + rootCfg.mux = kCLOCK_CKO2_ClockRoot_MuxOscRc48MDiv2; + rootCfg.div = 1; + CLOCK_SetRootClock(kCLOCK_Root_Cko2, &rootCfg); + + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 3); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ + IOMUXC_GPR->GPR4 &= ~IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR_MASK; + /* Set ENET_1G Tx clock source. */ + IOMUXC_GPR->GPR5 = ((IOMUXC_GPR->GPR5 & ~IOMUXC_GPR_GPR5_ENET1G_TX_CLK_SEL_MASK) | IOMUXC_GPR_GPR5_ENET1G_RGMII_EN_MASK); + /* Set ENET_1G Ref clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_ENET1G_REF_CLK_DIR_MASK; + /* Set ENET_QOS Tx clock source. */ + IOMUXC_GPR->GPR6 &= ~IOMUXC_GPR_GPR6_ENET_QOS_RGMII_EN_MASK; + /* Set ENET_QOS Ref clock source. */ + IOMUXC_GPR->GPR6 &= ~IOMUXC_GPR_GPR6_ENET_QOS_REF_CLK_DIR_MASK; + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR22 &= ~IOMUXC_GPR_GPR22_REF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR23 &= ~IOMUXC_GPR_GPR23_REF_1M_CLK_GPT2_MASK; + /* Set GPT3 High frequency reference clock source. */ + IOMUXC_GPR->GPR24 &= ~IOMUXC_GPR_GPR24_REF_1M_CLK_GPT3_MASK; + /* Set GPT4 High frequency reference clock source. */ + IOMUXC_GPR->GPR25 &= ~IOMUXC_GPR_GPR25_REF_1M_CLK_GPT4_MASK; + /* Set GPT5 High frequency reference clock source. */ + IOMUXC_GPR->GPR26 &= ~IOMUXC_GPR_GPR26_REF_1M_CLK_GPT5_MASK; + /* Set GPT6 High frequency reference clock source. */ + IOMUXC_GPR->GPR27 &= ~IOMUXC_GPR_GPR27_REF_1M_CLK_GPT6_MASK; + +#if __CORTEX_M == 7 + SystemCoreClock = CLOCK_GetRootClockFreq(kCLOCK_Root_M7); +#else + SystemCoreClock = CLOCK_GetRootClockFreq(kCLOCK_Root_M4); +#endif +} diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h new file mode 100644 index 000000000..82d2cf83c --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h @@ -0,0 +1,202 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if __CORTEX_M == 7 + #define BOARD_BOOTCLOCKRUN_CORE_CLOCK 996000000UL /*!< CM7 Core clock frequency: 996000000Hz */ +#else + #define BOARD_BOOTCLOCKRUN_CORE_CLOCK 392727272UL /*!< CM4 Core clock frequency: 392727272Hz */ +#endif + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_ACMP_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ADC1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ADC2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ARM_PLL_CLK 996000000UL +#define BOARD_BOOTCLOCKRUN_ASRC_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_AXI_CLK_ROOT 996000000UL +#define BOARD_BOOTCLOCKRUN_BUS_CLK_ROOT 240000000UL +#define BOARD_BOOTCLOCKRUN_BUS_LPSR_CLK_ROOT 160000000UL +#define BOARD_BOOTCLOCKRUN_CAN1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CAN2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CAN3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CCM_CLKO1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CCM_CLKO2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CSI2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI2_ESC_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI2_UI_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CSSYS_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_CSTRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_ELCDIF_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_EMV1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_EMV2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_1G_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_1G_TX_CLK 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_QOS_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_QOS_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_QOS_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TIMER1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_TIMER2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_TIMER3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GC355_CLK_ROOT 492000012UL +#define BOARD_BOOTCLOCKRUN_GPT1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT3_IPG_CLK_HIGHFREQ 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT4_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT4_IPG_CLK_HIGHFREQ 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT5_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT5_IPG_CLK_HIGHFREQ 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT6_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_GPT6_IPG_CLK_HIGHFREQ 24000000UL +#define BOARD_BOOTCLOCKRUN_LCDIFV2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C4_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C5_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C6_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI4_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI5_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI6_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART11_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART12_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART4_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART5_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART6_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART7_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART8_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_LPUART9_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_M4_CLK_ROOT 392727272UL +#define BOARD_BOOTCLOCKRUN_M4_SYSTICK_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_M7_CLK_ROOT 996000000UL +#define BOARD_BOOTCLOCKRUN_M7_SYSTICK_CLK_ROOT 100000UL +#define BOARD_BOOTCLOCKRUN_MIC_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_MIPI_DSI_TX_CLK_ESC_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_MIPI_ESC_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_MIPI_REF_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_MQS_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 24000000UL +#define BOARD_BOOTCLOCKRUN_OSC_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_OSC_32K 32768UL +#define BOARD_BOOTCLOCKRUN_OSC_RC_16M 16000000UL +#define BOARD_BOOTCLOCKRUN_OSC_RC_400M 400000000UL +#define BOARD_BOOTCLOCKRUN_OSC_RC_48M 48000000UL +#define BOARD_BOOTCLOCKRUN_OSC_RC_48M_DIV2 24000000UL +#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_CLK 0UL +#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_MODULATION 0UL +#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_RANGE 0UL +#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_CLK 984000025UL +#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_MODULATION 0UL +#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_RANGE 0UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI4_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI4_MCLK1 24000000UL +#define BOARD_BOOTCLOCKRUN_SAI4_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 198000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV5_CLK 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_MODULATION 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_RANGE 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_CLK 528000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD0_CLK 352000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD1_CLK 594000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD2_CLK 396000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD3_CLK 297000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_MODULATION 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_RANGE 0UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_DIV2_CLK 240000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD0_CLK 664615384UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD1_CLK 508235294UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD2_CLK 270000000UL +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD3_CLK 392727272UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 24000000UL + + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c new file mode 100644 index 000000000..aaa8a5ebb --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c @@ -0,0 +1,110 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1176xxxxx +package_id: MIMXRT1176DVMAA +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1170-EVKB +external_user_signals: {} +pin_labels: +- {pin_num: M13, pin_signal: GPIO_AD_04, label: 'SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7]', identifier: SIM1_PD;LED} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: cm7, enableClock: 'true'} +- pin_list: + - {pin_num: M15, peripheral: LPUART1, signal: RXD, pin_signal: GPIO_AD_25, software_input_on: Disable, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper, + open_drain: Disable, drive_strength: High, slew_rate: Slow} + - {pin_num: L13, peripheral: LPUART1, signal: TXD, pin_signal: GPIO_AD_24, software_input_on: Disable, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper, + open_drain: Disable, drive_strength: High, slew_rate: Slow} + - {pin_num: M13, peripheral: GPIO9, signal: 'gpio_io, 03', pin_signal: GPIO_AD_04, identifier: LED, pull_up_down_config: Pull_Down} + - {pin_num: T8, peripheral: GPIO13, signal: 'gpio_io, 00', pin_signal: WAKEUP, pull_up_down_config: Pull_Up} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins, assigned for the Cortex-M7F core. + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_04_GPIO9_IO03, /* GPIO_AD_04 is configured as GPIO9_IO03 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_24_LPUART1_TXD, /* GPIO_AD_24 is configured as LPUART1_TXD */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_25_LPUART1_RXD, /* GPIO_AD_25 is configured as LPUART1_RXD */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_WAKEUP_DIG_GPIO13_IO00, /* WAKEUP_DIG is configured as GPIO13_IO00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_AD_04_GPIO9_IO03, /* GPIO_AD_04 PAD functional properties : */ + 0x06U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_AD_24_LPUART1_TXD, /* GPIO_AD_24 PAD functional properties : */ + 0x02U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Disable, Highz + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_AD_25_LPUART1_RXD, /* GPIO_AD_25 PAD functional properties : */ + 0x02U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Disable, Highz + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_WAKEUP_DIG_GPIO13_IO00, /* WAKEUP_DIG PAD functional properties : */ + 0x0EU); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high driver + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull up + Open Drain SNVS Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h new file mode 100644 index 000000000..c778f487b --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h @@ -0,0 +1,77 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/* GPIO_AD_25 (coord M15), LPUART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITPINS_LPUART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_LPUART1_RXD_SIGNAL RXD /*!< Signal name */ + +/* GPIO_AD_24 (coord L13), LPUART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITPINS_LPUART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_LPUART1_TXD_SIGNAL TXD /*!< Signal name */ + +/* GPIO_AD_04 (coord M13), SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7] */ +/* Routed pin properties */ +#define BOARD_INITPINS_LED_PERIPHERAL GPIO9 /*!< Peripheral name */ +#define BOARD_INITPINS_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_LED_CHANNEL 3U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_LED_GPIO GPIO9 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_LED_GPIO_PIN 3U /*!< GPIO pin number */ +#define BOARD_INITPINS_LED_GPIO_PIN_MASK (1U << 3U) /*!< GPIO pin mask */ + +/* WAKEUP (coord T8), USER_BUTTON */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO13 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO13 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); /* Function assigned for the Cortex-M7F */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c new file mode 100644 index 000000000..0425cb2cb --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c @@ -0,0 +1,71 @@ +/* + * Copyright 2018-2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkbmimxrt1170_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"), used)) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .controllerMiscOption = 0x10, + .deviceType = kFlexSpiDeviceType_SerialNOR, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_133MHz, + .sflashA1Size = 64u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + [0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEC, RADDR_SDR, FLEXSPI_4PAD, 0x20), + [1] = FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + + // Read Status LUTs + [4 * 1 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x04), + + // Write Enable LUTs + [4 * 3 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0x0), + + // Erase Sector LUTs + [4 * 5 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x21, RADDR_SDR, FLEXSPI_1PAD, 0x20), + + // Erase Block LUTs + [4 * 8 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8, RADDR_SDR, FLEXSPI_1PAD, 0x18), + + // Pape Program LUTs + [4 * 9 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x12, RADDR_SDR, FLEXSPI_1PAD, 0x20), + [4 * 9 + 1] = FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), + + // Erase Chip LUTs + [4 * 11 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0x0), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = 0x1, + .blockSize = 64u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h new file mode 100644 index 000000000..839bb78f5 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h @@ -0,0 +1,270 @@ +/* + * Copyright 2018-2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1170_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1170_FLEXSPI_NOR_CONFIG__ + +#include +#include +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.1. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) +/*@}*/ + +/* FLEXSPI memory config block related definitions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related definitions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_80MHz = 4, + kFlexSpiSerialClk_100MHz = 5, + kFlexSpiSerialClk_120MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t isDataOrderSwapped; //!< The data order is swapped in OPI DDR mode + uint8_t reserved0; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP command execution + uint32_t blockSize; //!< Block size + uint32_t FlashStateCtx; //!< Flash State Context after being configured + uint32_t reserve2[10]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1170_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex new file mode 100644 index 000000000..721a3504b --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex @@ -0,0 +1,656 @@ + + + + MIMXRT1176xxxxx + MIMXRT1176DVMAA + MIMXRT1170-EVKB + ksdk2_0 + + + + + Configuration imported from evkbmimxrt1170_dev_cdc_vcom_lite_bm_cm7 + + + true + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm7 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + + + + 13.0.2 + c_array + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + 2.5.1 + + + + + + 13.0.2 + + + + + + + + + 0 + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + N/A + + + + diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index cfc98acad..aa920fb28 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -25,7 +25,6 @@ */ #include "bsp/board_api.h" -#include "board.h" // Suppress warning caused by mcu driver #ifdef __GNUC__ @@ -44,6 +43,9 @@ #endif #include "clock_config.h" +#include "pin_mux.h" + +#include "board.h" #if defined(BOARD_TUD_RHPORT) && CFG_TUD_ENABLED #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) @@ -58,8 +60,7 @@ #endif // needed by fsl_flexspi_nor_boot -TU_ATTR_USED -const uint8_t dcd_data[] = { 0x00 }; +TU_ATTR_USED const uint8_t dcd_data[] = { 0x00 }; //--------------------------------------------------------------------+ // @@ -87,23 +88,20 @@ void board_init(void) if (SCB_CCR_DC_Msk != (SCB_CCR_DC_Msk & SCB->CCR)) SCB_EnableDCache(); #endif - // Init clock + BOARD_InitPins(); BOARD_BootClockRUN(); SystemCoreClockUpdate(); #ifdef TRACE_ETM // RT1011 ETM pins - IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); - IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U); - IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); - IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); - IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); - CLOCK_EnableClock(kCLOCK_Trace); +// IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); +// IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U); +// IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); +// IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); +// IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); +// CLOCK_EnableClock(kCLOCK_Trace); #endif - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iomuxc); - #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -117,24 +115,24 @@ void board_init(void) #endif // LED - IOMUXC_SetPinMux( LED_PINMUX, 0U); - IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); +// IOMUXC_SetPinMux( LED_PINMUX, 0U); +// IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; GPIO_PinInit(LED_PORT, LED_PIN, &led_config); board_led_write(true); // Button - IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); - IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; +// IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); +// IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_NoIntmode}; GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); // UART - IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); - IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); - IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); - IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); +// IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); +// IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); +// IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); +// IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); lpuart_config_t uart_config; LPUART_GetDefaultConfig(&uart_config); @@ -142,15 +140,12 @@ void board_init(void) uart_config.enableTx = true; uart_config.enableRx = true; - uint32_t freq; - if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */ - { - freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); - } - else - { - freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); - } + uint32_t freq = board_uart_get_clock(); +// if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */ { +// freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); +// } else { +// freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); +// } if ( kStatus_Success != LPUART_Init(UART_PORT, &uart_config, freq) ) { // failed to init uart, probably baudrate is not supported @@ -181,25 +176,23 @@ void board_init(void) //--------------------------------------------------------------------+ // USB Interrupt Handler //--------------------------------------------------------------------+ -void USB_OTG1_IRQHandler(void) -{ +void USB_OTG1_IRQHandler(void) { #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); + tud_int_handler(0); #endif #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0, true); + tuh_int_handler(0, true); #endif } -void USB_OTG2_IRQHandler(void) -{ +void USB_OTG2_IRQHandler(void) { #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); + tud_int_handler(1); #endif #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1, true); + tuh_int_handler(1, true); #endif } @@ -207,35 +200,29 @@ void USB_OTG2_IRQHandler(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +void board_led_write(bool state) { + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } -uint32_t board_button_read(void) -{ - // active low +uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); } -int board_uart_read(uint8_t* buf, int len) -{ +int board_uart_read(uint8_t* buf, int len) { int count = 0; - while( count < len ) - { + while (count < len) { uint8_t const rx_count = LPUART_GetRxFifoCount(UART_PORT); - if (!rx_count) - { + if (!rx_count) { // clear all error flag if any uint32_t status_flags = LPUART_GetStatusFlags(UART_PORT); - status_flags &= (kLPUART_RxOverrunFlag | kLPUART_ParityErrorFlag | kLPUART_FramingErrorFlag | kLPUART_NoiseErrorFlag); + status_flags &= (kLPUART_RxOverrunFlag | kLPUART_ParityErrorFlag | kLPUART_FramingErrorFlag | + kLPUART_NoiseErrorFlag); LPUART_ClearStatusFlags(UART_PORT, status_flags); break; } - for(int i=0; i Date: Thu, 16 Nov 2023 16:42:15 +0700 Subject: [PATCH 52/82] update imxrt1010 with mex --- hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 11 +- .../mimxrt1010_evk/board/clock_config.c | 11 - .../boards/mimxrt1010_evk/board/pin_mux.c | 89 +++++ .../boards/mimxrt1010_evk/board/pin_mux.h | 89 +++++ .../boards/mimxrt1010_evk/mimxrt1010_evk.mex | 342 ++---------------- hw/bsp/imxrt/family.c | 29 +- 6 files changed, 211 insertions(+), 360 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index 926f45618..c96ddd7bb 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -28,25 +28,24 @@ #ifndef BOARD_H_ #define BOARD_H_ -#include "fsl_device_registers.h" - // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x1000000U) // LED #define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11 -#define LED_PORT GPIO1 -#define LED_PIN 11 +#define LED_PORT BOARD_INITPINS_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_LED_CHANNEL #define LED_STATE_ON 0 // SW8 button #define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 5 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_GPIO +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_GPIO_PIN #define BUTTON_STATE_ACTIVE 0 // UART #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD #define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c index 6cd18c8c2..1b28b668a 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c @@ -24,19 +24,8 @@ board: MIMXRT1010-EVK * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ #include "clock_config.h" - -// Suppress warning caused by mcu driver -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wunused-parameter" -#endif - #include "fsl_iomuxc.h" -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - /******************************************************************************* * Definitions ******************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c new file mode 100644 index 000000000..d86f8cd3b --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c @@ -0,0 +1,89 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1011xxxxx +package_id: MIMXRT1011DAE5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1010-EVK +external_user_signals: {} +pin_labels: +- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: LED} +power_domains: {NVCC_GPIO: '3.3'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm} + - {pin_num: '1', peripheral: GPIO1, signal: 'gpiomux_io, 11', pin_signal: GPIO_11, direction: OUTPUT} + - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09} + - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + /* GPIO configuration of LED on GPIO_11 (pin 1) */ + gpio_pin_config_t LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_11 (pin 1) */ + GPIO_PinInit(GPIO1, 11U, &LED_config); + + /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_SD_05 (pin 70) */ + GPIO_PinInit(GPIO2, 5U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_11_GPIOMUX_IO11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0x70A0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h new file mode 100644 index 000000000..73d9148c4 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h @@ -0,0 +1,89 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x0820U /*!< Select GPIO1 or GPIO2: affected bits mask */ + +/* GPIO_SD_05 (number 70), USER_BUTTON */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 5U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 5U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 5U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 5U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 5U) /*!< PORT pin mask */ + +/* GPIO_11 (number 1), GPIO_11 */ +/* Routed pin properties */ +#define BOARD_INITPINS_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_LED_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_LED_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_09 (number 3), LPUART1_RXD/J56[2] */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_RXD_SIGNAL RXD /*!< Signal name */ + +/* GPIO_10 (number 2), LPUART1_TXD/J56[4] */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_TXD_SIGNAL TXD /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex index 606ec2cfc..d67d60bc1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex @@ -26,6 +26,9 @@ 13.0.2 + + + @@ -42,17 +45,12 @@ true - + true - - - true - - - + true @@ -67,147 +65,7 @@ true - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - true - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - + true @@ -217,68 +75,17 @@ - - - - - - - - + - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - + - - - - - - - - - - - - - - - - - - - - + + + @@ -425,43 +232,8 @@ - - - - - true - - - - - 2.5.1 - - - - - true - - - - - 2.0.1 - - - - - true - - - - - 2.0.3 - - - - - - - + + 13.0.2 @@ -469,43 +241,7 @@ - - - - 0 - - - - - true - - - - - true - - - - - true - - - - - true - - - - - true - - - - - 0 - - - + @@ -555,7 +291,7 @@ - + @@ -582,7 +318,7 @@ - + @@ -594,7 +330,7 @@ - + @@ -614,44 +350,12 @@ - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -665,19 +369,19 @@ - + - + - + - + - + diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index aa920fb28..5361a12db 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -25,6 +25,9 @@ */ #include "bsp/board_api.h" +#include "board/clock_config.h" +#include "board/pin_mux.h" +#include "board.h" // Suppress warning caused by mcu driver #ifdef __GNUC__ @@ -42,11 +45,6 @@ #pragma GCC diagnostic pop #endif -#include "clock_config.h" -#include "pin_mux.h" - -#include "board.h" - #if defined(BOARD_TUD_RHPORT) && CFG_TUD_ENABLED #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) #else @@ -114,40 +112,23 @@ void board_init(void) #endif #endif - // LED -// IOMUXC_SetPinMux( LED_PINMUX, 0U); -// IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; - GPIO_PinInit(LED_PORT, LED_PIN, &led_config); board_led_write(true); - // Button -// IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); -// IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_NoIntmode}; - GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); - // UART -// IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); -// IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); -// IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); -// IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); - lpuart_config_t uart_config; LPUART_GetDefaultConfig(&uart_config); uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; uart_config.enableTx = true; uart_config.enableRx = true; - uint32_t freq = board_uart_get_clock(); +// uint32_t freq = board_uart_get_clock(); // if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */ { // freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); // } else { // freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); // } - if ( kStatus_Success != LPUART_Init(UART_PORT, &uart_config, freq) ) { + if ( kStatus_Success != LPUART_Init(UART_PORT, &uart_config, UART_CLK_ROOT) ) { // failed to init uart, probably baudrate is not supported // TU_BREAKPOINT(); } From fe2a7591595931ddfb0c66bc89b36ffedd850e2a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 17:01:43 +0700 Subject: [PATCH 53/82] update metro m7 airlift and sd --- hw/bsp/imxrt/boards/metro_m7_1011/board.h | 5 +- .../boards/metro_m7_1011/board/pin_mux.c | 90 +++++ .../boards/metro_m7_1011/board/pin_mux.h | 89 +++++ .../boards/metro_m7_1011/metro_m7_1011.mex | 341 ++--------------- hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h | 1 + .../boards/metro_m7_1011_sd/board/pin_mux.c | 105 ++++++ .../boards/metro_m7_1011_sd/board/pin_mux.h | 118 ++++++ .../metro_m7_1011_sd/metro_m7_1011_sd.mex | 357 +++--------------- hw/bsp/imxrt/family.c | 8 +- 9 files changed, 479 insertions(+), 635 deletions(-) create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 3c172ebb9..2da839772 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -35,8 +35,8 @@ // LED #define LED_PINMUX IOMUXC_GPIO_03_GPIOMUX_IO03 -#define LED_PORT GPIO1 -#define LED_PIN 3 +#define LED_PORT BOARD_INITPINS_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_LED_CHANNEL #define LED_STATE_ON 1 // D2 as button @@ -47,6 +47,7 @@ // UART #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD #define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c new file mode 100644 index 000000000..b351d7521 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c @@ -0,0 +1,90 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1011xxxxx +package_id: MIMXRT1011DAE5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1010-EVK +external_user_signals: {} +pin_labels: +- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: GPIO_11} +- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED} +power_domains: {NVCC_GPIO: '3.3'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm} + - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09} + - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10} + - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, direction: OUTPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + /* GPIO configuration of LED on GPIO_03 (pin 10) */ + gpio_pin_config_t LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_03 (pin 10) */ + GPIO_PinInit(GPIO1, 3U, &LED_config); + + /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_SD_05 (pin 70) */ + GPIO_PinInit(GPIO2, 5U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_03_GPIOMUX_IO03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0xB0A0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h new file mode 100644 index 000000000..3e6bf01b8 --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h @@ -0,0 +1,89 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x28U /*!< Select GPIO1 or GPIO2: affected bits mask */ + +/* GPIO_SD_05 (number 70), USER_BUTTON */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 5U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 5U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 5U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 5U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 5U) /*!< PORT pin mask */ + +/* GPIO_09 (number 3), LPUART1_RXD/J56[2] */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_RXD_SIGNAL RXD /*!< Signal name */ + +/* GPIO_10 (number 2), LPUART1_TXD/J56[4] */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_TXD_SIGNAL TXD /*!< Signal name */ + +/* GPIO_03 (number 10), SAI1_RXD0/U10[16] */ +/* Routed pin properties */ +#define BOARD_INITPINS_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_LED_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_LED_CHANNEL 3U /*!< Signal channel */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex index 606ec2cfc..443f94534 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -42,17 +46,12 @@ true - + true - - - true - - - + true @@ -67,147 +66,7 @@ true - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - true - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - + true @@ -217,66 +76,15 @@ - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - + + + - - - - - - - - - - - - - - - - - - - - + @@ -425,43 +233,8 @@ - - - - - true - - - - - 2.5.1 - - - - - true - - - - - 2.0.1 - - - - - true - - - - - 2.0.3 - - - - - - - + + 13.0.2 @@ -469,43 +242,7 @@ - - - - 0 - - - - - true - - - - - true - - - - - true - - - - - true - - - - - true - - - - - 0 - - - + @@ -555,7 +292,7 @@ - + @@ -582,7 +319,7 @@ - + @@ -594,7 +331,7 @@ - + @@ -614,44 +351,12 @@ - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -665,19 +370,19 @@ - + - + - + - + - + diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h index 3c172ebb9..120ba2e8a 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h @@ -47,6 +47,7 @@ // UART #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD #define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c new file mode 100644 index 000000000..19b04ff0e --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c @@ -0,0 +1,105 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1011xxxxx +package_id: MIMXRT1011DAE5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1010-EVK +external_user_signals: {} +pin_labels: +- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: GPIO_11} +- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED} +power_domains: {NVCC_GPIO: '3.3'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm} + - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09} + - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10} + - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, direction: OUTPUT} + - {pin_num: '79', peripheral: ARM, signal: 'TRACE, 1', pin_signal: GPIO_13, speed: MHZ_200} + - {pin_num: '80', peripheral: ARM, signal: 'TRACE, 2', pin_signal: GPIO_12, speed: MHZ_200} + - {pin_num: '58', peripheral: ARM, signal: arm_trace_clk, pin_signal: GPIO_AD_02, speed: MHZ_200} + - {pin_num: '1', peripheral: ARM, signal: 'TRACE, 3', pin_signal: GPIO_11, speed: MHZ_200} + - {pin_num: '60', peripheral: ARM, signal: 'TRACE, 0', pin_signal: GPIO_AD_00, speed: MHZ_200} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + /* GPIO configuration of LED on GPIO_03 (pin 10) */ + gpio_pin_config_t LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_03 (pin 10) */ + GPIO_PinInit(GPIO1, 3U, &LED_config); + + /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_SD_05 (pin 70) */ + GPIO_PinInit(GPIO2, 5U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_03_GPIOMUX_IO03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_11_ARM_TRACE3, 0x10E0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_12_ARM_TRACE2, 0x10E0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_13_ARM_TRACE1, 0x10E0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0x10E0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0x10E0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0xB0A0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h new file mode 100644 index 000000000..e0697b02a --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h @@ -0,0 +1,118 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x28U /*!< Select GPIO1 or GPIO2: affected bits mask */ + +/* GPIO_SD_05 (number 70), USER_BUTTON */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 5U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 5U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 5U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 5U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 5U) /*!< PORT pin mask */ + +/* GPIO_09 (number 3), LPUART1_RXD/J56[2] */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_RXD_SIGNAL RXD /*!< Signal name */ + +/* GPIO_10 (number 2), LPUART1_TXD/J56[4] */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_TXD_SIGNAL TXD /*!< Signal name */ + +/* GPIO_03 (number 10), SAI1_RXD0/U10[16] */ +/* Routed pin properties */ +#define BOARD_INITPINS_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_LED_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_LED_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_13 (number 79), USB_OTG1_ID/J9[4]/Q9[2] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USB_OTG1_ID_PERIPHERAL ARM /*!< Peripheral name */ +#define BOARD_INITPINS_USB_OTG1_ID_SIGNAL TRACE /*!< Signal name */ +#define BOARD_INITPINS_USB_OTG1_ID_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_12 (number 80), USB_OTG1_OC/U7[A2] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USB_OTG1_OC_PERIPHERAL ARM /*!< Peripheral name */ +#define BOARD_INITPINS_USB_OTG1_OC_SIGNAL TRACE /*!< Signal name */ +#define BOARD_INITPINS_USB_OTG1_OC_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_AD_02 (number 58), ADC12_2/J26[12]/J56[16] */ +/* Routed pin properties */ +#define BOARD_INITPINS_ADC12_2_PERIPHERAL ARM /*!< Peripheral name */ +#define BOARD_INITPINS_ADC12_2_SIGNAL arm_trace_clk /*!< Signal name */ + +/* GPIO_11 (number 1), GPIO_11 */ +/* Routed pin properties */ +#define BOARD_INITPINS_GPIO_11_PERIPHERAL ARM /*!< Peripheral name */ +#define BOARD_INITPINS_GPIO_11_SIGNAL TRACE /*!< Signal name */ +#define BOARD_INITPINS_GPIO_11_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_AD_00 (number 60), USB_OTG1_PWR */ +/* Routed pin properties */ +#define BOARD_INITPINS_USB_OTG1_PWR_PERIPHERAL ARM /*!< Peripheral name */ +#define BOARD_INITPINS_USB_OTG1_PWR_SIGNAL TRACE /*!< Signal name */ +#define BOARD_INITPINS_USB_OTG1_PWR_CHANNEL 0U /*!< Signal channel */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex index ef3ae4542..de755e810 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -42,7 +46,12 @@ true - + + + true + + + true @@ -62,146 +71,7 @@ true - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - true - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - + true @@ -211,66 +81,40 @@ - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - + + + - - - - - - - - + - + - - - - - - - - + + + + + + + + + + + + + + + + + + + + + @@ -419,43 +263,8 @@ - - - - - true - - - - - 2.5.1 - - - - - true - - - - - 2.0.1 - - - - - true - - - - - 2.0.3 - - - - - - - + + 13.0.2 @@ -463,43 +272,7 @@ - - - - 0 - - - - - true - - - - - true - - - - - true - - - - - true - - - - - true - - - - - 0 - - - + @@ -549,7 +322,7 @@ - + @@ -576,7 +349,7 @@ - + @@ -588,7 +361,7 @@ - + @@ -608,44 +381,12 @@ - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -659,19 +400,19 @@ - + - + - + - + - + diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 5361a12db..61d7e9bb2 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -91,13 +91,7 @@ void board_init(void) SystemCoreClockUpdate(); #ifdef TRACE_ETM - // RT1011 ETM pins -// IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); -// IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); -// CLOCK_EnableClock(kCLOCK_Trace); + CLOCK_EnableClock(kCLOCK_Trace); #endif #if CFG_TUSB_OS == OPT_OS_NONE From f9bdc8ad22b5a071d6acb0177b8e2c5d36143b6b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 17:19:15 +0700 Subject: [PATCH 54/82] update rt1015 evk --- hw/bsp/imxrt/boards/mimxrt1015_evk/board.h | 9 +- .../boards/mimxrt1015_evk/board/pin_mux.c | 118 ++++++++++ .../boards/mimxrt1015_evk/board/pin_mux.h | 133 ++++++++++++ .../boards/mimxrt1015_evk/mimxrt1015_evk.mex | 202 ++++-------------- 4 files changed, 293 insertions(+), 169 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 10d9fad07..2d7e2dc26 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -33,18 +33,19 @@ // LED #define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21 -#define LED_PORT GPIO3 -#define LED_PIN 21 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 // SW8 button #define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 9 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_GPIO +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_GPIO_PIN #define BUTTON_STATE_ACTIVE 0 // UART #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX #define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c new file mode 100644 index 000000000..97224a332 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c @@ -0,0 +1,118 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1015xxxxx +package_id: MIMXRT1015DAF5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1015-EVK +external_user_signals: {} +pin_labels: +- {pin_num: '21', pin_signal: GPIO_SD_B1_01, label: GPIO SD_B1_01, identifier: USER_LED} +power_domains: {NVCC_GPIO: '3.3'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '1', peripheral: GPIO2, signal: 'gpio_io, 09', pin_signal: GPIO_EMC_09, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm} + - {pin_num: '68', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07, pull_up_down_config: Pull_Down_100K_Ohm} + - {pin_num: '72', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06} + - {pin_num: '21', peripheral: GPIO3, signal: 'gpio_io, 21', pin_signal: GPIO_SD_B1_01, direction: OUTPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + /* GPIO configuration of USER_BUTTON on GPIO_EMC_09 (pin 1) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_EMC_09 (pin 1) */ + GPIO_PinInit(GPIO2, 9U, &USER_BUTTON_config); + + /* GPIO configuration of USER_LED on GPIO_SD_B1_01 (pin 21) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_SD_B1_01 (pin 21) */ + GPIO_PinInit(GPIO3, 21U, &USER_LED_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_GPIO2_IO09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_GPIO3_IO21, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0x10B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_09_GPIO2_IO09, 0x70B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '12', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: '11', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: '9', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10} + - {pin_num: '10', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09} + - {pin_num: '13', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06} + - {pin_num: '8', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, 0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h new file mode 100644 index 000000000..c9cbe3b72 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h @@ -0,0 +1,133 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/* GPIO_EMC_09 (number 1), USER_BUTTON */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 9U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 9U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 9U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 9U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 9U) /*!< PORT pin mask */ + +/* GPIO_AD_B0_07 (number 68), LPUART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + +/* GPIO_AD_B0_06 (number 72), LPUART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + +/* GPIO_SD_B1_01 (number 21), GPIO SD_B1_01 */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO3 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 21U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO3 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 21U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 21U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO3 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 21U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 21U) /*!< PORT pin mask */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_SD_B1_07 (number 12), FlexSPI_CLK_A/U13[6] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_08 (number 11), FlexSPI_D0_A/U13[5] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_10 (number 9), FlexSPI_D1_A/U13[2] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_09 (number 10), FlexSPI_D2_A/U13[3] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_06 (number 13), FlexSPI_D3_A/U13[7] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_11 (number 8), FlexSPI_SS0/U13[1] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex index 431a59af7..88265d32e 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex @@ -26,6 +26,12 @@ 13.0.2 + + + + + + @@ -39,41 +45,51 @@ true + + + true + + + + + true + + true - - - - - Configures pin routing and optionally pin electrical features. - - true - core0 - true - - - - - true - - - + true - + true - + + + + + + + + + + + + + + + + + @@ -109,147 +125,6 @@ - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -399,11 +274,8 @@ - - - - - + + 13.0.2 From 794dbf923a707d2a6208205be0e319c209599393 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 17:33:33 +0700 Subject: [PATCH 55/82] updat rt1020 --- hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 9 +- .../boards/mimxrt1020_evk/board/pin_mux.c | 342 +++++++++++ .../boards/mimxrt1020_evk/board/pin_mux.h | 542 ++++++++++++++++++ .../boards/mimxrt1020_evk/mimxrt1020_evk.mex | 33 +- 4 files changed, 921 insertions(+), 5 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 284bb08e7..ba307819d 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -33,18 +33,19 @@ // LED #define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 -#define LED_PORT GPIO1 -#define LED_PIN 5 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 // SW8 button #define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_GPIO +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_GPIO_PIN #define BUTTON_STATE_ACTIVE 0 // UART #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX #define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c new file mode 100644 index 000000000..07d910c2c --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c @@ -0,0 +1,342 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1021xxxxx +package_id: MIMXRT1021DAG5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1020-EVK +external_user_signals: {} +pin_labels: +- {pin_num: '52', pin_signal: WAKEUP, label: USER_BUTTON, identifier: USER_BUTTON} +- {pin_num: '106', pin_signal: GPIO_AD_B0_05, label: 'JTAG_nTRST/J16[3]/USER_LED/J17[5]', identifier: USER_LED} +power_domains: {NVCC_GPIO: '3.3'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '52', peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT} + - {pin_num: '106', peripheral: GPIO1, signal: 'gpio_io, 05', pin_signal: GPIO_AD_B0_05, direction: OUTPUT, pull_keeper_select: Keeper} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + CLOCK_EnableClock(kCLOCK_IomuxcSnvs); + + /* GPIO configuration of USER_LED on GPIO_AD_B0_05 (pin 106) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_AD_B0_05 (pin 106) */ + GPIO_PinInit(GPIO1, 5U, &USER_LED_config); + + /* GPIO configuration of USER_BUTTON on WAKEUP (pin 52) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on WAKEUP (pin 52) */ + GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_05_GPIO1_IO05, 0U); + IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_05_GPIO1_IO05, 0x50A0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07} + - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSDRAMPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '142', peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_16} + - {pin_num: '141', peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_17} + - {pin_num: '140', peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_18} + - {pin_num: '139', peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_19} + - {pin_num: '138', peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_20} + - {pin_num: '136', peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_22} + - {pin_num: '137', peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_21} + - {pin_num: '133', peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_23} + - {pin_num: '132', peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_24} + - {pin_num: '131', peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_25} + - {pin_num: '143', peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_15} + - {pin_num: '130', peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_26} + - {pin_num: '129', peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_27} + - {pin_num: '2', peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_13} + - {pin_num: '1', peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_14} + - {pin_num: '7', peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_10} + - {pin_num: '127', peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_29} + - {pin_num: '126', peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_30} + - {pin_num: '3', peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_12} + - {pin_num: '8', peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_09} + - {pin_num: '4', peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_11} + - {pin_num: '128', peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_28} + - {pin_num: '125', peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_31} + - {pin_num: '9', peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08} + - {pin_num: '117', peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_39} + - {pin_num: '118', peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_38} + - {pin_num: '119', peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_37} + - {pin_num: '120', peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_36} + - {pin_num: '122', peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_34} + - {pin_num: '121', peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_35} + - {pin_num: '123', peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_33} + - {pin_num: '124', peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_32} + - {pin_num: '10', peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07} + - {pin_num: '12', peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06} + - {pin_num: '13', peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05} + - {pin_num: '14', peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04} + - {pin_num: '15', peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03} + - {pin_num: '16', peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02} + - {pin_num: '17', peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01} + - {pin_num: '18', peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSDRAMPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSDRAMPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_WE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_CAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_RAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_CS0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_BA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_BA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_ADDR05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_ADDR06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_ADDR08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_ADDR09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_ADDR11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_ADDR12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_DQS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CKE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DM01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA13, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DATA14, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DATA15, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCANPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '32', peripheral: CAN1, signal: RX, pin_signal: GPIO_SD_B1_01} + - {pin_num: '33', peripheral: CAN1, signal: TX, pin_signal: GPIO_SD_B1_00} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCANPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCANPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXCAN1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXCAN1_RX, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitENETPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '97', peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_AD_B0_11} + - {pin_num: '84', peripheral: GPIO1, signal: 'gpio_io, 22', pin_signal: GPIO_AD_B1_06} + - {pin_num: '107', peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04} + - {pin_num: '100', peripheral: ENET, signal: enet_tx_clk, pin_signal: GPIO_AD_B0_08} + - {pin_num: '95', peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_AD_B0_13} + - {pin_num: '93', peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_AD_B0_15} + - {pin_num: '94', peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_AD_B0_14} + - {pin_num: '96', peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_AD_B0_12} + - {pin_num: '99', peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_AD_B0_09} + - {pin_num: '98', peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_AD_B0_10} + - {pin_num: '116', peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_40} + - {pin_num: '115', peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_41} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitENETPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitENETPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_08_ENET_TX_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDIO, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDC, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '45', peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_03} + - {pin_num: '46', peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_02} + - {pin_num: '43', peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_04} + - {pin_num: '42', peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_05} + - {pin_num: '48', peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_00} + - {pin_num: '47', peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_01} + - {pin_num: '41', peripheral: GPIO3, signal: 'gpio_io, 19', pin_signal: GPIO_SD_B0_06} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_CMD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_06_GPIO3_IO19, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '24', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: '23', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: '21', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10} + - {pin_num: '22', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09} + - {pin_num: '25', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06} + - {pin_num: '19', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, 0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h new file mode 100644 index 000000000..4155c56ec --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h @@ -0,0 +1,542 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/* WAKEUP (number 52), USER_BUTTON */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO5 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 0U) /*!< PORT pin mask */ + +/* GPIO_AD_B0_05 (number 106), JTAG_nTRST/J16[3]/USER_LED/J17[5] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 5U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 5U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 5U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 5U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 5U) /*!< PORT pin mask */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_07 (number 101), UART1_RXD/J17[4] */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + +/* GPIO_AD_B0_06 (number 105), UART1_TXD/J17[6] */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_EMC_16 (number 142), SEMC_A0/U14[23]/BOOT_MODE[0] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_17 (number 141), SEMC_A1/U14[24]/BOOT_MODE[1] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_18 (number 140), SEMC_A2/U14[25]/BT_CFG[0] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_19 (number 139), SEMC_A3/U14[26]/BT_CFG[1] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_20 (number 138), SEMC_A4/U14[29]/BT_CFG[2] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_22 (number 136), SEMC_A6/U14[31]/BT_CFG[4] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_21 (number 137), SEMC_A5/U14[30]/BT_CFG[3] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_23 (number 133), SEMC_A7/U14[32]/BT_CFG[5] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_24 (number 132), SEMC_A8/U14[33]/BT_CFG[6] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_25 (number 131), SEMC_A9/U14[34]/BT_CFG[7] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_15 (number 143), SEMC_A10/U14[22] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_26 (number 130), SEMC_A11/U14[35]/BT_CFG[8] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_27 (number 129), SEMC_A12/U14[36]/BT_CFG[9] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_13 (number 2), SEMC_BA0/U14[20] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_14 (number 1), SEMC_BA1/U14[21] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_10 (number 7), SEMC_CAS/U14[17] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */ + +/* GPIO_EMC_29 (number 127), SEMC_CKE/U14[37] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */ + +/* GPIO_EMC_30 (number 126), SEMC_CLK/U14[38] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */ + +/* GPIO_EMC_12 (number 3), SEMC_CS0/U14[19] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL CS /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_09 (number 8), SEMC_WE/U14[16] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */ + +/* GPIO_EMC_11 (number 4), SEMC_RAS/U14[18] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */ + +/* GPIO_EMC_28 (number 128), SEMC_DQS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL semc_dqs /*!< Signal name */ + +/* GPIO_EMC_31 (number 125), SEMC_DM1/U14[39] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_08 (number 9), SEMC_DM0/U14[15] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_39 (number 117), SEMC_D15/U14[53] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_EMC_38 (number 118), SEMC_D14/U14[51] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_EMC_37 (number 119), SEMC_D13/U14[50] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_EMC_36 (number 120), SEMC_D12/U14[48] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_34 (number 122), SEMC_D10/U14[45] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_35 (number 121), SEMC_D11/U14[47] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_33 (number 123), SEMC_D9/U14[44] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_32 (number 124), SEMC_D8/U14[42] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_07 (number 10), SEMC_D7/U14[13] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_06 (number 12), SEMC_D6/U14[11] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_05 (number 13), SEMC_D5/U14[10] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_04 (number 14), SEMC_D4/U14[8] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_03 (number 15), SEMC_D3/U14[7] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_02 (number 16), SEMC_D2/U14[5] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_01 (number 17), SEMC_D1/U14[4] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_00 (number 18), SEMC_D0/U14[2] */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSDRAMPins(void); + +/* GPIO_SD_B1_01 (number 32), CAN1_RX/U9[4] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN1_RX_PERIPHERAL CAN1 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN1_RX_SIGNAL RX /*!< Signal name */ + +/* GPIO_SD_B1_00 (number 33), CAN1_TX/U9[1] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN1_TX_PERIPHERAL CAN1 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN1_TX_SIGNAL TX /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCANPins(void); + +/* GPIO_AD_B0_11 (number 97), ENET_CRS_DV/U11[18]/J19[3] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */ + +/* GPIO_AD_B1_06 (number 84), ENET_INT/U11[21]/J17[8] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_INT_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_INT_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_INT_CHANNEL 22U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITENETPINS_ENET_INT_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITENETPINS_ENET_INT_GPIO_PIN 22U /*!< GPIO pin number */ +#define BOARD_INITENETPINS_ENET_INT_GPIO_PIN_MASK (1U << 22U) /*!< GPIO pin mask */ +#define BOARD_INITENETPINS_ENET_INT_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITENETPINS_ENET_INT_PIN 22U /*!< PORT pin number */ +#define BOARD_INITENETPINS_ENET_INT_PIN_MASK (1U << 22U) /*!< PORT pin mask */ + +/* GPIO_AD_B0_04 (number 107), JTAG_TDO/J16[13]/ENET_RST/U11[32] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RST_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RST_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RST_CHANNEL 4U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITENETPINS_ENET_RST_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITENETPINS_ENET_RST_GPIO_PIN 4U /*!< GPIO pin number */ +#define BOARD_INITENETPINS_ENET_RST_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */ +#define BOARD_INITENETPINS_ENET_RST_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITENETPINS_ENET_RST_PIN 4U /*!< PORT pin number */ +#define BOARD_INITENETPINS_ENET_RST_PIN_MASK (1U << 4U) /*!< PORT pin mask */ + +/* GPIO_AD_B0_08 (number 100), ENET_TX_CLK/U11[9] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_tx_clk /*!< Signal name */ + +/* GPIO_AD_B0_13 (number 95), ENET_TXEN/U11[23]/J19[5] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */ + +/* GPIO_AD_B0_15 (number 93), ENET_TXD1/U11[25]/J19[2] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_AD_B0_14 (number 94), ENET_TXD0/U11[24]/J17[7] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_AD_B0_12 (number 96), ENET_RXER/U11[20]/J19[4] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */ + +/* GPIO_AD_B0_09 (number 99), ENET_RXD1/U11[15]/J17[3] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_AD_B0_10 (number 98), ENET_RXD0/U11[16]/J19[6] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_40 (number 116), ENET_MDIO/U11[11] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */ + +/* GPIO_EMC_41 (number 115), ENET_MDC/U11[12] */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitENETPins(void); + +/* GPIO_SD_B0_03 (number 45), SD1_CLK/J15[5] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */ + +/* GPIO_SD_B0_02 (number 46), SD1_CMD/J15[3] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */ + +/* GPIO_SD_B0_04 (number 43), SD1_D0/J15[7] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_SD_B0_05 (number 42), SD1_D1/J15[8] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_SD_B0_00 (number 48), SD1_D2/J15[1] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_SD_B0_01 (number 47), SD1_D3/J15[2] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_SD_B0_06 (number 41), SD_CD_SW/J15[9] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_PERIPHERAL GPIO3 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_CHANNEL 19U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO GPIO3 /*!< GPIO peripheral base pointer */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO_PIN 19U /*!< GPIO pin number */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO_PIN_MASK (1U << 19U) /*!< GPIO pin mask */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_PORT GPIO3 /*!< PORT peripheral base pointer */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_PIN 19U /*!< PORT pin number */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_PIN_MASK (1U << 19U) /*!< PORT pin mask */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_07 (number 24), FlexSPI_CLK/U13[6] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_08 (number 23), FlexSPI_D0_A/U13[5] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_10 (number 21), FlexSPI_D1_A/U13[2] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_09 (number 22), FlexSPI_D2_A/U13[3] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_06 (number 25), FlexSPI_D3_A/U13[7] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_11 (number 19), FlexSPI_SS0/U13[1] */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex index 4ddaaed77..4437a420e 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -42,13 +46,40 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. From 882da9944d9b7ec29d98843d102506565886121d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 18:23:48 +0700 Subject: [PATCH 56/82] update rt1024 evk --- hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 1 + .../boards/mimxrt1024_evk/board/pin_mux.c | 490 ++++++++++++++++++ .../boards/mimxrt1024_evk/board/pin_mux.h | 439 ++++++++++++++++ .../boards/mimxrt1024_evk/mimxrt1024_evk.mex | 46 +- 4 files changed, 965 insertions(+), 11 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 9100072e2..96e977fb1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -46,6 +46,7 @@ // UART - DRN verified #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX #define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c new file mode 100644 index 000000000..29a9d8d3d --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c @@ -0,0 +1,490 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1024xxxxx +package_id: MIMXRT1024DAG5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1024-EVK +pin_labels: +- {pin_num: '52', pin_signal: WAKEUP, label: USER_BUTTON, identifier: USER_BUTTON} +- {pin_num: '82', pin_signal: GPIO_AD_B1_08, label: 'UART_TX/USER_LED/J17[4]', identifier: USER_LED} +power_domains: {NVCC_GPIO: '3.3'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); + +/* GPIO_AD_B1_00~GPIO_AD_B1_05 can only be configured as flexspi function. Note that it can't be modified here */ + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_FLEXSPI_A_DATA03,1U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_FLEXSPI_A_SCLK,1U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_02_FLEXSPI_A_DATA00,1U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_03_FLEXSPI_A_DATA02,1U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_FLEXSPI_A_DATA01,1U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_FLEXSPI_A_SS0_B,1U); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '52', peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT} + - {pin_num: '82', peripheral: GPIO1, signal: 'gpio_io, 24', pin_signal: GPIO_AD_B1_08, direction: OUTPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + CLOCK_EnableClock(kCLOCK_IomuxcSnvs); /* iomuxc_snvs clock (iomuxc_snvs_clk_enable): 0x03U */ + + /* GPIO configuration of USER_LED on GPIO_AD_B1_08 (pin 82) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_AD_B1_08 (pin 82) */ + GPIO_PinInit(GPIO1, 24U, &USER_LED_config); + + /* GPIO configuration of USER_BUTTON on WAKEUP (pin 52) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on WAKEUP (pin 52) */ + GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config); + + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B1_08_GPIO1_IO24, /* GPIO_AD_B1_08 is configured as GPIO1_IO24 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_SNVS_WAKEUP_GPIO5_IO00, /* WAKEUP is configured as GPIO5_IO00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07} + - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_06_LPUART1_TX, /* GPIO_AD_B0_06 is configured as LPUART1_TX */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_07_LPUART1_RX, /* GPIO_AD_B0_07 is configured as LPUART1_RX */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSDRAMPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '142', peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_16} + - {pin_num: '141', peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_17} + - {pin_num: '140', peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_18} + - {pin_num: '139', peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_19} + - {pin_num: '138', peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_20} + - {pin_num: '136', peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_22} + - {pin_num: '137', peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_21} + - {pin_num: '133', peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_23} + - {pin_num: '132', peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_24} + - {pin_num: '131', peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_25} + - {pin_num: '143', peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_15} + - {pin_num: '130', peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_26} + - {pin_num: '129', peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_27} + - {pin_num: '2', peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_13} + - {pin_num: '1', peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_14} + - {pin_num: '7', peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_10} + - {pin_num: '127', peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_29} + - {pin_num: '126', peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_30} + - {pin_num: '3', peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_12} + - {pin_num: '8', peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_09} + - {pin_num: '4', peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_11} + - {pin_num: '128', peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_28} + - {pin_num: '125', peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_31} + - {pin_num: '9', peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08} + - {pin_num: '117', peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_39} + - {pin_num: '118', peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_38} + - {pin_num: '119', peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_37} + - {pin_num: '120', peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_36} + - {pin_num: '122', peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_34} + - {pin_num: '121', peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_35} + - {pin_num: '123', peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_33} + - {pin_num: '124', peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_32} + - {pin_num: '10', peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07} + - {pin_num: '12', peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06} + - {pin_num: '13', peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05} + - {pin_num: '14', peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04} + - {pin_num: '15', peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03} + - {pin_num: '16', peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02} + - {pin_num: '17', peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01} + - {pin_num: '18', peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSDRAMPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSDRAMPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_00_SEMC_DATA00, /* GPIO_EMC_00 is configured as SEMC_DATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_01_SEMC_DATA01, /* GPIO_EMC_01 is configured as SEMC_DATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_02_SEMC_DATA02, /* GPIO_EMC_02 is configured as SEMC_DATA02 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_03_SEMC_DATA03, /* GPIO_EMC_03 is configured as SEMC_DATA03 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_04_SEMC_DATA04, /* GPIO_EMC_04 is configured as SEMC_DATA04 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_05_SEMC_DATA05, /* GPIO_EMC_05 is configured as SEMC_DATA05 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_06_SEMC_DATA06, /* GPIO_EMC_06 is configured as SEMC_DATA06 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_07_SEMC_DATA07, /* GPIO_EMC_07 is configured as SEMC_DATA07 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_08_SEMC_DM00, /* GPIO_EMC_08 is configured as SEMC_DM00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_09_SEMC_WE, /* GPIO_EMC_09 is configured as SEMC_WE */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_10_SEMC_CAS, /* GPIO_EMC_10 is configured as SEMC_CAS */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_11_SEMC_RAS, /* GPIO_EMC_11 is configured as SEMC_RAS */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_12_SEMC_CS0, /* GPIO_EMC_12 is configured as SEMC_CS0 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_13_SEMC_BA0, /* GPIO_EMC_13 is configured as SEMC_BA0 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_14_SEMC_BA1, /* GPIO_EMC_14 is configured as SEMC_BA1 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_15_SEMC_ADDR10, /* GPIO_EMC_15 is configured as SEMC_ADDR10 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_16_SEMC_ADDR00, /* GPIO_EMC_16 is configured as SEMC_ADDR00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_17_SEMC_ADDR01, /* GPIO_EMC_17 is configured as SEMC_ADDR01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_18_SEMC_ADDR02, /* GPIO_EMC_18 is configured as SEMC_ADDR02 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_19_SEMC_ADDR03, /* GPIO_EMC_19 is configured as SEMC_ADDR03 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_20_SEMC_ADDR04, /* GPIO_EMC_20 is configured as SEMC_ADDR04 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_21_SEMC_ADDR05, /* GPIO_EMC_21 is configured as SEMC_ADDR05 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_22_SEMC_ADDR06, /* GPIO_EMC_22 is configured as SEMC_ADDR06 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_23_SEMC_ADDR07, /* GPIO_EMC_23 is configured as SEMC_ADDR07 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_24_SEMC_ADDR08, /* GPIO_EMC_24 is configured as SEMC_ADDR08 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_25_SEMC_ADDR09, /* GPIO_EMC_25 is configured as SEMC_ADDR09 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_26_SEMC_ADDR11, /* GPIO_EMC_26 is configured as SEMC_ADDR11 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_27_SEMC_ADDR12, /* GPIO_EMC_27 is configured as SEMC_ADDR12 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_28_SEMC_DQS, /* GPIO_EMC_28 is configured as SEMC_DQS */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_29_SEMC_CKE, /* GPIO_EMC_29 is configured as SEMC_CKE */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_30_SEMC_CLK, /* GPIO_EMC_30 is configured as SEMC_CLK */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_31_SEMC_DM01, /* GPIO_EMC_31 is configured as SEMC_DM01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_32_SEMC_DATA08, /* GPIO_EMC_32 is configured as SEMC_DATA08 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_33_SEMC_DATA09, /* GPIO_EMC_33 is configured as SEMC_DATA09 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_34_SEMC_DATA10, /* GPIO_EMC_34 is configured as SEMC_DATA10 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_35_SEMC_DATA11, /* GPIO_EMC_35 is configured as SEMC_DATA11 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_36_SEMC_DATA12, /* GPIO_EMC_36 is configured as SEMC_DATA12 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_37_SEMC_DATA13, /* GPIO_EMC_37 is configured as SEMC_DATA13 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_38_SEMC_DATA14, /* GPIO_EMC_38 is configured as SEMC_DATA14 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_39_SEMC_DATA15, /* GPIO_EMC_39 is configured as SEMC_DATA15 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCANPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '32', peripheral: CAN1, signal: RX, pin_signal: GPIO_SD_B1_01} + - {pin_num: '33', peripheral: CAN1, signal: TX, pin_signal: GPIO_SD_B1_00} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCANPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCANPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_00_FLEXCAN1_TX, /* GPIO_SD_B1_00 is configured as FLEXCAN1_TX */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_01_FLEXCAN1_RX, /* GPIO_SD_B1_01 is configured as FLEXCAN1_RX */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitENETPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '97', peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_AD_B0_11} + - {pin_num: '84', peripheral: GPIO1, signal: 'gpio_io, 22', pin_signal: GPIO_AD_B1_06} + - {pin_num: '107', peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04} + - {pin_num: '100', peripheral: ENET, signal: enet_tx_clk, pin_signal: GPIO_AD_B0_08} + - {pin_num: '95', peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_AD_B0_13} + - {pin_num: '93', peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_AD_B0_15} + - {pin_num: '94', peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_AD_B0_14} + - {pin_num: '96', peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_AD_B0_12} + - {pin_num: '99', peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_AD_B0_09} + - {pin_num: '98', peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_AD_B0_10} + - {pin_num: '116', peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_40} + - {pin_num: '115', peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_41} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitENETPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitENETPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, /* GPIO_AD_B0_04 is configured as GPIO1_IO04 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_08_ENET_TX_CLK, /* GPIO_AD_B0_08 is configured as ENET_TX_CLK */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, /* GPIO_AD_B0_09 is configured as ENET_RDATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, /* GPIO_AD_B0_10 is configured as ENET_RDATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, /* GPIO_AD_B0_11 is configured as ENET_RX_EN */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, /* GPIO_AD_B0_12 is configured as ENET_RX_ER */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, /* GPIO_AD_B0_13 is configured as ENET_TX_EN */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, /* GPIO_AD_B0_14 is configured as ENET_TDATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, /* GPIO_AD_B0_15 is configured as ENET_TDATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, /* GPIO_AD_B1_06 is configured as GPIO1_IO22 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_40_ENET_MDIO, /* GPIO_EMC_40 is configured as ENET_MDIO */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_41_ENET_MDC, /* GPIO_EMC_41 is configured as ENET_MDC */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '45', peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_03} + - {pin_num: '46', peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_02} + - {pin_num: '43', peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_04} + - {pin_num: '42', peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_05} + - {pin_num: '48', peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_00} + - {pin_num: '47', peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_01} + - {pin_num: '41', peripheral: GPIO3, signal: 'gpio_io, 19', pin_signal: GPIO_SD_B0_06} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2, /* GPIO_SD_B0_00 is configured as USDHC1_DATA2 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3, /* GPIO_SD_B0_01 is configured as USDHC1_DATA3 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_02_USDHC1_CMD, /* GPIO_SD_B0_02 is configured as USDHC1_CMD */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_03_USDHC1_CLK, /* GPIO_SD_B0_03 is configured as USDHC1_CLK */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0, /* GPIO_SD_B0_04 is configured as USDHC1_DATA0 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1, /* GPIO_SD_B0_05 is configured as USDHC1_DATA1 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B0_06_GPIO3_IO19, /* GPIO_SD_B0_06 is configured as GPIO3_IO19 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '24', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: '23', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: '21', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10} + - {pin_num: '22', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09} + - {pin_num: '25', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06} + - {pin_num: '19', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, /* GPIO_SD_B1_06 is configured as FLEXSPI_A_DATA03 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, /* GPIO_SD_B1_07 is configured as FLEXSPI_A_SCLK */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, /* GPIO_SD_B1_08 is configured as FLEXSPI_A_DATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, /* GPIO_SD_B1_09 is configured as FLEXSPI_A_DATA02 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, /* GPIO_SD_B1_10 is configured as FLEXSPI_A_DATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, /* GPIO_SD_B1_11 is configured as FLEXSPI_A_SS0_B */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h new file mode 100644 index 000000000..73ca62533 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h @@ -0,0 +1,439 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/* Define the flexspi macro. Note that it can't be modified here */ +#define IOMUXC_GPIO_AD_B1_00_FLEXSPI_A_DATA03 0x401F80FCU, 0x1U, 0x401F8374U, 0x1U, 0x401F8270U +#define IOMUXC_GPIO_AD_B1_01_FLEXSPI_A_SCLK 0x401F8100U, 0x1U, 0x401F8378U, 0x1U, 0x401F8274U +#define IOMUXC_GPIO_AD_B1_02_FLEXSPI_A_DATA00 0x401F8104U, 0x1U, 0x401F8368U, 0x1U, 0x401F8278U +#define IOMUXC_GPIO_AD_B1_03_FLEXSPI_A_DATA02 0x401F8108U, 0x1U, 0x401F8370U, 0x1U, 0x401F827CU +#define IOMUXC_GPIO_AD_B1_04_FLEXSPI_A_DATA01 0x401F810CU, 0x1U, 0x401F836CU, 0x1U, 0x401F8280U +#define IOMUXC_GPIO_AD_B1_05_FLEXSPI_A_SS0_B 0x401F8110U, 0x1U, 0, 0, 0x401F8284U + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/* WAKEUP (number 52), USER_BUTTON */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO device name: GPIO5 */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT device name: GPIO5 */ +#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< GPIO5 pin index: 0 */ + +/* GPIO_AD_B1_08 (number 82), UART_TX/USER_LED/J17[4] */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO device name: GPIO1 */ +#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT device name: GPIO1 */ +#define BOARD_INITPINS_USER_LED_PIN 24U /*!< GPIO1 pin index: 24 */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_07 (number 101), UART1_RXD/J17[8] */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Device name: LPUART1 */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< LPUART1 signal: RX */ + +/* GPIO_AD_B0_06 (number 105), UART1_TXD/J17[12] */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Device name: LPUART1 */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< LPUART1 signal: TX */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_EMC_16 (number 142), SEMC_A0/U14[23]/BOOT_MODE[0] */ +#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< SEMC ADDR channel: 00 */ + +/* GPIO_EMC_17 (number 141), SEMC_A1/U14[24]/BOOT_MODE[1] */ +#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< SEMC ADDR channel: 01 */ + +/* GPIO_EMC_18 (number 140), SEMC_A2/U14[25]/BT_CFG[0] */ +#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< SEMC ADDR channel: 02 */ + +/* GPIO_EMC_19 (number 139), SEMC_A3/U14[26]/BT_CFG[1] */ +#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< SEMC ADDR channel: 03 */ + +/* GPIO_EMC_20 (number 138), SEMC_A4/U14[29]/BT_CFG[2] */ +#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< SEMC ADDR channel: 04 */ + +/* GPIO_EMC_22 (number 136), SEMC_A6/U14[31]/BT_CFG[4] */ +#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< SEMC ADDR channel: 06 */ + +/* GPIO_EMC_21 (number 137), SEMC_A5/U14[30]/BT_CFG[3] */ +#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< SEMC ADDR channel: 05 */ + +/* GPIO_EMC_23 (number 133), SEMC_A7/U14[32]/BT_CFG[5] */ +#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< SEMC ADDR channel: 07 */ + +/* GPIO_EMC_24 (number 132), SEMC_A8/U14[33]/BT_CFG[6] */ +#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< SEMC ADDR channel: 08 */ + +/* GPIO_EMC_25 (number 131), SEMC_A9/U14[34]/BT_CFG[7] */ +#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< SEMC ADDR channel: 09 */ + +/* GPIO_EMC_15 (number 143), SEMC_A10/U14[22] */ +#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< SEMC ADDR channel: 10 */ + +/* GPIO_EMC_26 (number 130), SEMC_A11/U14[35]/BT_CFG[8] */ +#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< SEMC ADDR channel: 11 */ + +/* GPIO_EMC_27 (number 129), SEMC_A12/U14[36]/BT_CFG[9] */ +#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< SEMC signal: ADDR */ +#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< SEMC ADDR channel: 12 */ + +/* GPIO_EMC_13 (number 2), SEMC_BA0/U14[20] */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< SEMC signal: BA */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< SEMC BA channel: 0 */ + +/* GPIO_EMC_14 (number 1), SEMC_BA1/U14[21] */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< SEMC signal: BA */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< SEMC BA channel: 1 */ + +/* GPIO_EMC_10 (number 7), SEMC_CAS/U14[17] */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< SEMC signal: semc_cas */ + +/* GPIO_EMC_29 (number 127), SEMC_CKE/U14[37] */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< SEMC signal: semc_cke */ + +/* GPIO_EMC_30 (number 126), SEMC_CLK/U14[38] */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< SEMC signal: semc_clk */ + +/* GPIO_EMC_12 (number 3), SEMC_CS0/U14[19] */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL CS /*!< SEMC signal: CS */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL 0U /*!< SEMC CS channel: 0 */ + +/* GPIO_EMC_09 (number 8), SEMC_WE/U14[16] */ +#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< SEMC signal: semc_we */ + +/* GPIO_EMC_11 (number 4), SEMC_RAS/U14[18] */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< SEMC signal: semc_ras */ + +/* GPIO_EMC_28 (number 128), SAI3_MCLK */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL semc_dqs /*!< SEMC signal: semc_dqs */ + +/* GPIO_EMC_31 (number 125), SEMC_DM1/U14[39] */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< SEMC signal: DM */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< SEMC DM channel: 1 */ + +/* GPIO_EMC_08 (number 9), SEMC_DM0/U14[15] */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< SEMC signal: DM */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< SEMC DM channel: 0 */ + +/* GPIO_EMC_39 (number 117), SEMC_D15/U14[53] */ +#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< SEMC DATA channel: 15 */ + +/* GPIO_EMC_38 (number 118), SEMC_D14/U14[51] */ +#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< SEMC DATA channel: 14 */ + +/* GPIO_EMC_37 (number 119), SEMC_D13/U14[50] */ +#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< SEMC DATA channel: 13 */ + +/* GPIO_EMC_36 (number 120), SEMC_D12/U14[48] */ +#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< SEMC DATA channel: 12 */ + +/* GPIO_EMC_34 (number 122), SEMC_D10/U14[45] */ +#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< SEMC DATA channel: 10 */ + +/* GPIO_EMC_35 (number 121), SEMC_D11/U14[47] */ +#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< SEMC DATA channel: 11 */ + +/* GPIO_EMC_33 (number 123), SEMC_D9/U14[44] */ +#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< SEMC DATA channel: 09 */ + +/* GPIO_EMC_32 (number 124), SEMC_D8/U14[42] */ +#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< SEMC DATA channel: 08 */ + +/* GPIO_EMC_07 (number 10), SEMC_D7/U14[13] */ +#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< SEMC DATA channel: 07 */ + +/* GPIO_EMC_06 (number 12), SEMC_D6/U14[11] */ +#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< SEMC DATA channel: 06 */ + +/* GPIO_EMC_05 (number 13), SEMC_D5/U14[10] */ +#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< SEMC DATA channel: 05 */ + +/* GPIO_EMC_04 (number 14), SEMC_D4/U14[8] */ +#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< SEMC DATA channel: 04 */ + +/* GPIO_EMC_03 (number 15), SEMC_D3/U14[7] */ +#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< SEMC DATA channel: 03 */ + +/* GPIO_EMC_02 (number 16), SEMC_D2/U14[5] */ +#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< SEMC DATA channel: 02 */ + +/* GPIO_EMC_01 (number 17), SEMC_D1/U14[4] */ +#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< SEMC DATA channel: 01 */ + +/* GPIO_EMC_00 (number 18), SEMC_D0/U14[2] */ +#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Device name: SEMC */ +#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< SEMC signal: DATA */ +#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< SEMC DATA channel: 00 */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSDRAMPins(void); + +/* GPIO_SD_B1_01 (number 32), CAN1_RX/U9[4] */ +#define BOARD_INITCANPINS_CAN1_RX_PERIPHERAL CAN1 /*!< Device name: CAN1 */ +#define BOARD_INITCANPINS_CAN1_RX_SIGNAL RX /*!< CAN1 signal: RX */ + +/* GPIO_SD_B1_00 (number 33), CAN1_TX/U9[1] */ +#define BOARD_INITCANPINS_CAN1_TX_PERIPHERAL CAN1 /*!< Device name: CAN1 */ +#define BOARD_INITCANPINS_CAN1_TX_SIGNAL TX /*!< CAN1 signal: TX */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCANPins(void); + +/* GPIO_AD_B0_11 (number 97), ENET_CRS_DV/U11[18]/J19[6] */ +#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< ENET signal: enet_rx_en */ + +/* GPIO_AD_B1_06 (number 84), ENET_INT/U11[21]/J17[16] */ +#define BOARD_INITENETPINS_ENET_INT_GPIO GPIO1 /*!< GPIO device name: GPIO1 */ +#define BOARD_INITENETPINS_ENET_INT_PORT GPIO1 /*!< PORT device name: GPIO1 */ +#define BOARD_INITENETPINS_ENET_INT_PIN 22U /*!< GPIO1 pin index: 22 */ + +/* GPIO_AD_B0_04 (number 107), JTAG_TDO/ENET_RST/U11[32] */ +#define BOARD_INITENETPINS_ENET_RST_GPIO GPIO1 /*!< GPIO device name: GPIO1 */ +#define BOARD_INITENETPINS_ENET_RST_PORT GPIO1 /*!< PORT device name: GPIO1 */ +#define BOARD_INITENETPINS_ENET_RST_PIN 4U /*!< GPIO1 pin index: 4 */ + +/* GPIO_AD_B0_08 (number 100), ENET_TX_REF_CLK/U11[9] */ +#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_tx_clk /*!< ENET signal: enet_tx_clk */ + +/* GPIO_AD_B0_13 (number 95), ENET_TXEN/U11[23]/J19[10] */ +#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< ENET signal: enet_tx_en */ + +/* GPIO_AD_B0_15 (number 93), ENET_TXD1/U11[25]/J19[4] */ +#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< ENET signal: enet_tx_data */ +#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< ENET enet_tx_data channel: 1 */ + +/* GPIO_AD_B0_14 (number 94), ENET_TXD0/U11[24]/J17[14] */ +#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< ENET signal: enet_tx_data */ +#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< ENET enet_tx_data channel: 0 */ + +/* GPIO_AD_B0_12 (number 96), ENET_RXER/U11[20]/J19[8] */ +#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< ENET signal: enet_rx_er */ + +/* GPIO_AD_B0_09 (number 99), ENET_RXD1/U11[15]/J17[6] */ +#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< ENET signal: enet_rx_data */ +#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< ENET enet_rx_data channel: 1 */ + +/* GPIO_AD_B0_10 (number 98), ENET_RXD0/U11[16]/J19[12] */ +#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< ENET signal: enet_rx_data */ +#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< ENET enet_rx_data channel: 0 */ + +/* GPIO_EMC_40 (number 116), ENET_MDIO/U11[11] */ +#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< ENET signal: enet_mdio */ + +/* GPIO_EMC_41 (number 115), ENET_MDC/U11[12] */ +#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Device name: ENET */ +#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< ENET signal: enet_mdc */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitENETPins(void); + +/* GPIO_SD_B0_03 (number 45), SD1_CLK/J15[5] */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Device name: USDHC1 */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< USDHC1 signal: usdhc_clk */ + +/* GPIO_SD_B0_02 (number 46), SD1_CMD/J15[3] */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Device name: USDHC1 */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< USDHC1 signal: usdhc_cmd */ + +/* GPIO_SD_B0_04 (number 43), SD1_D0/J15[7] */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Device name: USDHC1 */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< USDHC1 signal: usdhc_data */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< USDHC1 usdhc_data channel: 0 */ + +/* GPIO_SD_B0_05 (number 42), SD1_D1/J15[8] */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Device name: USDHC1 */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< USDHC1 signal: usdhc_data */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< USDHC1 usdhc_data channel: 1 */ + +/* GPIO_SD_B0_00 (number 48), SD1_D2/J15[1] */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Device name: USDHC1 */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< USDHC1 signal: usdhc_data */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< USDHC1 usdhc_data channel: 2 */ + +/* GPIO_SD_B0_01 (number 47), SD1_D3/J15[2] */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Device name: USDHC1 */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< USDHC1 signal: usdhc_data */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< USDHC1 usdhc_data channel: 3 */ + +/* GPIO_SD_B0_06 (number 41), SD_CD_SW/J15[9] */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO GPIO3 /*!< GPIO device name: GPIO3 */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_PORT GPIO3 /*!< PORT device name: GPIO3 */ +#define BOARD_INITUSDHCPINS_SD_CD_SW_PIN 19U /*!< GPIO3 pin index: 19 */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_07 (number 24), SAI3_TX_SYNC */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Device name: FLEXSPI */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< FLEXSPI signal: FLEXSPI_A_SCLK */ + +/* GPIO_SD_B1_08 (number 23), SAI3_TXD */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Device name: FLEXSPI */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< FLEXSPI signal: FLEXSPI_A_DATA0 */ + +/* GPIO_SD_B1_10 (number 21), SD_PWREN */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Device name: FLEXSPI */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< FLEXSPI signal: FLEXSPI_A_DATA1 */ + +/* GPIO_SD_B1_09 (number 22), AUD_INT */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Device name: FLEXSPI */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< FLEXSPI signal: FLEXSPI_A_DATA2 */ + +/* GPIO_SD_B1_06 (number 25), SAI3_TX_BCLK */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Device name: FLEXSPI */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< FLEXSPI signal: FLEXSPI_A_DATA3 */ + +/* GPIO_SD_B1_11 (number 19), SAI3_RXD */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Device name: FLEXSPI */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< FLEXSPI signal: FLEXSPI_A_SS0_B */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex index 2aa55a604..7c44950ec 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -39,13 +43,39 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. @@ -423,11 +453,8 @@ - - - - - + + 13.0.2 c_array @@ -440,11 +467,8 @@ - - - - - + + 13.0.2 From 2ff08aceec23461bc10935b34da1ede9315359aa Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 20:05:27 +0700 Subject: [PATCH 57/82] update rt1050 (not tested) --- hw/bsp/imxrt/boards/metro_m7_1011/board.h | 18 +- .../boards/metro_m7_1011/board/pin_mux.c | 23 +- .../boards/metro_m7_1011/board/pin_mux.h | 28 +- .../boards/metro_m7_1011/metro_m7_1011.mex | 22 +- hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h | 18 +- .../boards/metro_m7_1011_sd/board/pin_mux.c | 25 +- .../boards/metro_m7_1011_sd/board/pin_mux.h | 34 +- .../metro_m7_1011_sd/metro_m7_1011_sd.mex | 30 +- hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 14 +- .../boards/mimxrt1010_evk/board/pin_mux.c | 10 +- .../boards/mimxrt1010_evk/board/pin_mux.h | 6 +- .../boards/mimxrt1010_evk/mimxrt1010_evk.mex | 3 +- hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 10 +- hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 18 +- hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 18 +- .../boards/mimxrt1050_evkb/board/pin_mux.c | 618 ++++++++++++++ .../boards/mimxrt1050_evkb/board/pin_mux.h | 761 ++++++++++++++++++ .../mimxrt1050_evkb/mimxrt1050_evkb.mex | 36 +- hw/bsp/imxrt/family.cmake | 1 + 19 files changed, 1538 insertions(+), 155 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 2da839772..1f741e1d7 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -33,22 +33,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (8*1024*1024) -// LED -#define LED_PINMUX IOMUXC_GPIO_03_GPIOMUX_IO03 -#define LED_PORT BOARD_INITPINS_LED_PERIPHERAL -#define LED_PIN BOARD_INITPINS_LED_CHANNEL +// LED: IOMUXC_GPIO_03_GPIOMUX_IO03 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 1 -// D2 as button -#define BUTTON_PINMUX IOMUXC_GPIO_13_GPIOMUX_IO13 -#define BUTTON_PORT GPIO1 -#define BUTTON_PIN 13 +// D8 as button: GPIO8 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_09_LPUART1_RXD, IOMUXC_GPIO_10_LPUART1_TXD #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD -#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c index b351d7521..6216d99c8 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c @@ -15,7 +15,8 @@ board: MIMXRT1010-EVK external_user_signals: {} pin_labels: - {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: GPIO_11} -- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED} +- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED;USER_LED} +- {pin_num: '4', pin_signal: GPIO_08, label: 'SAI1_MCLK/U10[11]', identifier: USER_BUTTON} power_domains: {NVCC_GPIO: '3.3'} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ @@ -40,10 +41,10 @@ void BOARD_InitBootPins(void) { BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} - pin_list: - - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm} - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09} - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10} - - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, direction: OUTPUT} + - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, identifier: USER_LED, direction: OUTPUT} + - {pin_num: '4', peripheral: GPIO1, signal: 'gpiomux_io, 08', pin_signal: GPIO_08, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ @@ -56,33 +57,33 @@ BOARD_InitPins: void BOARD_InitPins(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); - /* GPIO configuration of LED on GPIO_03 (pin 10) */ - gpio_pin_config_t LED_config = { + /* GPIO configuration of USER_LED on GPIO_03 (pin 10) */ + gpio_pin_config_t USER_LED_config = { .direction = kGPIO_DigitalOutput, .outputLogic = 0U, .interruptMode = kGPIO_NoIntmode }; /* Initialize GPIO functionality on GPIO_03 (pin 10) */ - GPIO_PinInit(GPIO1, 3U, &LED_config); + GPIO_PinInit(GPIO1, 3U, &USER_LED_config); - /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */ + /* GPIO configuration of USER_BUTTON on GPIO_08 (pin 4) */ gpio_pin_config_t USER_BUTTON_config = { .direction = kGPIO_DigitalInput, .outputLogic = 0U, .interruptMode = kGPIO_NoIntmode }; - /* Initialize GPIO functionality on GPIO_SD_05 (pin 70) */ - GPIO_PinInit(GPIO2, 5U, &USER_BUTTON_config); + /* Initialize GPIO functionality on GPIO_08 (pin 4) */ + GPIO_PinInit(GPIO1, 8U, &USER_BUTTON_config); IOMUXC_SetPinMux(IOMUXC_GPIO_03_GPIOMUX_IO03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_08_GPIOMUX_IO08, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U); - IOMUXC_SetPinMux(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0U); IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK))) | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U) ); - IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0xB0A0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_08_GPIOMUX_IO08, 0xB0A0U); } /*********************************************************************************************************************** diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h index 3e6bf01b8..5a6603cbe 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h @@ -37,21 +37,7 @@ extern "C" { */ void BOARD_InitBootPins(void); -#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x28U /*!< Select GPIO1 or GPIO2: affected bits mask */ - -/* GPIO_SD_05 (number 70), USER_BUTTON */ -/* Routed pin properties */ -#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ -#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ -#define BOARD_INITPINS_USER_BUTTON_CHANNEL 5U /*!< Signal channel */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ -#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 5U /*!< GPIO pin number */ -#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 5U) /*!< GPIO pin mask */ -#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ -#define BOARD_INITPINS_USER_BUTTON_PIN 5U /*!< PORT pin number */ -#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 5U) /*!< PORT pin mask */ +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x08U /*!< Select GPIO1 or GPIO2: affected bits mask */ /* GPIO_09 (number 3), LPUART1_RXD/J56[2] */ /* Routed pin properties */ @@ -65,9 +51,15 @@ void BOARD_InitBootPins(void); /* GPIO_03 (number 10), SAI1_RXD0/U10[16] */ /* Routed pin properties */ -#define BOARD_INITPINS_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ -#define BOARD_INITPINS_LED_SIGNAL gpiomux_io /*!< Signal name */ -#define BOARD_INITPINS_LED_CHANNEL 3U /*!< Signal channel */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_08 (number 4), SAI1_MCLK/U10[11] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 8U /*!< Signal channel */ /*! * @brief Configures pin routing and optionally pin electrical features. diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex index 443f94534..de0a2f75d 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex @@ -28,7 +28,8 @@ 13.0.2 - + + @@ -46,12 +47,12 @@ true - + true - + true @@ -73,20 +74,21 @@ - - - - - - - + + + + + + + + diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h index 120ba2e8a..1f741e1d7 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h @@ -33,22 +33,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (8*1024*1024) -// LED -#define LED_PINMUX IOMUXC_GPIO_03_GPIOMUX_IO03 -#define LED_PORT GPIO1 -#define LED_PIN 3 +// LED: IOMUXC_GPIO_03_GPIOMUX_IO03 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 1 -// D2 as button -#define BUTTON_PINMUX IOMUXC_GPIO_13_GPIOMUX_IO13 -#define BUTTON_PORT GPIO1 -#define BUTTON_PIN 13 +// D8 as button: GPIO8 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_09_LPUART1_RXD, IOMUXC_GPIO_10_LPUART1_TXD #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD -#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c index 19b04ff0e..aa38e02dc 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c @@ -15,7 +15,10 @@ board: MIMXRT1010-EVK external_user_signals: {} pin_labels: - {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: GPIO_11} -- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED} +- {pin_num: '70', pin_signal: GPIO_SD_05} +- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED;USER_LED} +- {pin_num: '4', pin_signal: GPIO_08, label: 'SAI1_MCLK/U10[11]', identifier: USER_BUTTON} +- {pin_num: '79', pin_signal: GPIO_13, label: 'USB_OTG1_ID/J9[4]/Q9[2]', identifier: TRACE1} power_domains: {NVCC_GPIO: '3.3'} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ @@ -40,15 +43,15 @@ void BOARD_InitBootPins(void) { BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} - pin_list: - - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm} - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09} - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10} - - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, direction: OUTPUT} + - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, identifier: USER_LED, direction: OUTPUT} - {pin_num: '79', peripheral: ARM, signal: 'TRACE, 1', pin_signal: GPIO_13, speed: MHZ_200} - {pin_num: '80', peripheral: ARM, signal: 'TRACE, 2', pin_signal: GPIO_12, speed: MHZ_200} - {pin_num: '58', peripheral: ARM, signal: arm_trace_clk, pin_signal: GPIO_AD_02, speed: MHZ_200} - {pin_num: '1', peripheral: ARM, signal: 'TRACE, 3', pin_signal: GPIO_11, speed: MHZ_200} - {pin_num: '60', peripheral: ARM, signal: 'TRACE, 0', pin_signal: GPIO_AD_00, speed: MHZ_200} + - {pin_num: '4', peripheral: GPIO1, signal: 'gpiomux_io, 08', pin_signal: GPIO_08, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ @@ -61,25 +64,26 @@ BOARD_InitPins: void BOARD_InitPins(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); - /* GPIO configuration of LED on GPIO_03 (pin 10) */ - gpio_pin_config_t LED_config = { + /* GPIO configuration of USER_LED on GPIO_03 (pin 10) */ + gpio_pin_config_t USER_LED_config = { .direction = kGPIO_DigitalOutput, .outputLogic = 0U, .interruptMode = kGPIO_NoIntmode }; /* Initialize GPIO functionality on GPIO_03 (pin 10) */ - GPIO_PinInit(GPIO1, 3U, &LED_config); + GPIO_PinInit(GPIO1, 3U, &USER_LED_config); - /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */ + /* GPIO configuration of USER_BUTTON on GPIO_08 (pin 4) */ gpio_pin_config_t USER_BUTTON_config = { .direction = kGPIO_DigitalInput, .outputLogic = 0U, .interruptMode = kGPIO_NoIntmode }; - /* Initialize GPIO functionality on GPIO_SD_05 (pin 70) */ - GPIO_PinInit(GPIO2, 5U, &USER_BUTTON_config); + /* Initialize GPIO functionality on GPIO_08 (pin 4) */ + GPIO_PinInit(GPIO1, 8U, &USER_BUTTON_config); IOMUXC_SetPinMux(IOMUXC_GPIO_03_GPIOMUX_IO03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_08_GPIOMUX_IO08, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U); @@ -87,17 +91,16 @@ void BOARD_InitPins(void) { IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U); IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U); - IOMUXC_SetPinMux(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0U); IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK))) | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U) ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_08_GPIOMUX_IO08, 0xB0A0U); IOMUXC_SetPinConfig(IOMUXC_GPIO_11_ARM_TRACE3, 0x10E0U); IOMUXC_SetPinConfig(IOMUXC_GPIO_12_ARM_TRACE2, 0x10E0U); IOMUXC_SetPinConfig(IOMUXC_GPIO_13_ARM_TRACE1, 0x10E0U); IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0x10E0U); IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0x10E0U); - IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0xB0A0U); } /*********************************************************************************************************************** diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h index e0697b02a..42c256745 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h @@ -37,21 +37,7 @@ extern "C" { */ void BOARD_InitBootPins(void); -#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x28U /*!< Select GPIO1 or GPIO2: affected bits mask */ - -/* GPIO_SD_05 (number 70), USER_BUTTON */ -/* Routed pin properties */ -#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ -#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ -#define BOARD_INITPINS_USER_BUTTON_CHANNEL 5U /*!< Signal channel */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ -#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 5U /*!< GPIO pin number */ -#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 5U) /*!< GPIO pin mask */ -#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ -#define BOARD_INITPINS_USER_BUTTON_PIN 5U /*!< PORT pin number */ -#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 5U) /*!< PORT pin mask */ +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x08U /*!< Select GPIO1 or GPIO2: affected bits mask */ /* GPIO_09 (number 3), LPUART1_RXD/J56[2] */ /* Routed pin properties */ @@ -65,15 +51,15 @@ void BOARD_InitBootPins(void); /* GPIO_03 (number 10), SAI1_RXD0/U10[16] */ /* Routed pin properties */ -#define BOARD_INITPINS_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ -#define BOARD_INITPINS_LED_SIGNAL gpiomux_io /*!< Signal name */ -#define BOARD_INITPINS_LED_CHANNEL 3U /*!< Signal channel */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 3U /*!< Signal channel */ /* GPIO_13 (number 79), USB_OTG1_ID/J9[4]/Q9[2] */ /* Routed pin properties */ -#define BOARD_INITPINS_USB_OTG1_ID_PERIPHERAL ARM /*!< Peripheral name */ -#define BOARD_INITPINS_USB_OTG1_ID_SIGNAL TRACE /*!< Signal name */ -#define BOARD_INITPINS_USB_OTG1_ID_CHANNEL 1U /*!< Signal channel */ +#define BOARD_INITPINS_TRACE1_PERIPHERAL ARM /*!< Peripheral name */ +#define BOARD_INITPINS_TRACE1_SIGNAL TRACE /*!< Signal name */ +#define BOARD_INITPINS_TRACE1_CHANNEL 1U /*!< Signal channel */ /* GPIO_12 (number 80), USB_OTG1_OC/U7[A2] */ /* Routed pin properties */ @@ -98,6 +84,12 @@ void BOARD_InitBootPins(void); #define BOARD_INITPINS_USB_OTG1_PWR_SIGNAL TRACE /*!< Signal name */ #define BOARD_INITPINS_USB_OTG1_PWR_CHANNEL 0U /*!< Signal channel */ +/* GPIO_08 (number 4), SAI1_MCLK/U10[11] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 8U /*!< Signal channel */ + /*! * @brief Configures pin routing and optionally pin electrical features. * diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex index de755e810..7aab59a68 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex @@ -28,7 +28,10 @@ 13.0.2 - + + + + @@ -46,11 +49,6 @@ true - - - true - - true @@ -61,6 +59,11 @@ true + + + true + + true @@ -78,17 +81,11 @@ - - - - - - - + @@ -117,6 +114,13 @@ + + + + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index c96ddd7bb..c0c9f69a5 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -31,22 +31,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x1000000U) -// LED -#define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11 -#define LED_PORT BOARD_INITPINS_LED_PERIPHERAL -#define LED_PIN BOARD_INITPINS_LED_CHANNEL +// LED: IOMUXC_GPIO_11_GPIOMUX_IO11 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// SW8 button -#define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05 +// SW8 button: IOMUXC_GPIO_SD_05_GPIO2_IO05 #define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_GPIO #define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_GPIO_PIN #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_09_LPUART1_RXD, IOMUXC_GPIO_10_LPUART1_TXD #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD -#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c index d86f8cd3b..b960191d1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c @@ -14,7 +14,7 @@ processor_version: 13.0.2 board: MIMXRT1010-EVK external_user_signals: {} pin_labels: -- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: LED} +- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: LED;USERLED;USER_LED} power_domains: {NVCC_GPIO: '3.3'} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ @@ -40,7 +40,7 @@ BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm} - - {pin_num: '1', peripheral: GPIO1, signal: 'gpiomux_io, 11', pin_signal: GPIO_11, direction: OUTPUT} + - {pin_num: '1', peripheral: GPIO1, signal: 'gpiomux_io, 11', pin_signal: GPIO_11, identifier: USER_LED, direction: OUTPUT} - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09} - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** @@ -55,14 +55,14 @@ BOARD_InitPins: void BOARD_InitPins(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); - /* GPIO configuration of LED on GPIO_11 (pin 1) */ - gpio_pin_config_t LED_config = { + /* GPIO configuration of USER_LED on GPIO_11 (pin 1) */ + gpio_pin_config_t USER_LED_config = { .direction = kGPIO_DigitalOutput, .outputLogic = 0U, .interruptMode = kGPIO_NoIntmode }; /* Initialize GPIO functionality on GPIO_11 (pin 1) */ - GPIO_PinInit(GPIO1, 11U, &LED_config); + GPIO_PinInit(GPIO1, 11U, &USER_LED_config); /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */ gpio_pin_config_t USER_BUTTON_config = { diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h index 73d9148c4..0c980150a 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h @@ -55,9 +55,9 @@ void BOARD_InitBootPins(void); /* GPIO_11 (number 1), GPIO_11 */ /* Routed pin properties */ -#define BOARD_INITPINS_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ -#define BOARD_INITPINS_LED_SIGNAL gpiomux_io /*!< Signal name */ -#define BOARD_INITPINS_LED_CHANNEL 11U /*!< Signal channel */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpiomux_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 11U /*!< Signal channel */ /* GPIO_09 (number 3), LPUART1_RXD/J56[2] */ /* Routed pin properties */ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex index d67d60bc1..701f3e9c3 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex @@ -27,7 +27,7 @@ 13.0.2 - + @@ -81,6 +81,7 @@ + diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index ba307819d..781c61bf3 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -31,22 +31,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x800000U) -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 +// LED: IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 #define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL #define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00 #define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_GPIO #define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_GPIO_PIN #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_AD_B0_07_LPUART1_RX, IOMUXC_GPIO_AD_B0_06_LPUART1_TX #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 96e977fb1..df9fa87c5 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -32,22 +32,18 @@ // RT1020-EVK #define BOARD_FLASH_SIZE (0x800000U) #define BOARD_FLASH_SIZE (0x400000U) // builtin flash of RT1024 -// LED - DRN updated for RT1024EVK -#define LED_PINMUX IOMUXC_GPIO_AD_B1_08_GPIO1_IO24 -#define LED_PORT GPIO1 -#define LED_PIN 24 +// LED: IOMUXC_GPIO_AD_B1_08_GPIO1_IO24 +#define LED_PORT BOARD_INITPINS_USER_LED_GPIO +#define LED_PIN BOARD_INITPINS_USER_LED_PIN #define LED_STATE_ON 1 -// SW8 button - DRN verified -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 +// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_GPIO +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_PIN #define BUTTON_STATE_ACTIVE 0 -// UART - DRN verified +// UART: IOMUXC_GPIO_AD_B0_07_LPUART1_RX, IOMUXC_GPIO_AD_B0_06_LPUART1_TX #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index beb69bf2b..853cdf9ab 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -31,21 +31,17 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x4000000U) -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIO1 -#define LED_PIN 9 +// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 +// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, IOMUXC_GPIO_AD_B0_12_LPUART1_TXD #define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RXD -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TXD #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c new file mode 100644 index 000000000..aebfa5f46 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c @@ -0,0 +1,618 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1052xxxxB +package_id: MIMXRT1052DVL6B +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: IMXRT1050-EVKB +pin_labels: +- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED} +- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper} + - {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + CLOCK_EnableClock(kCLOCK_IomuxcSnvs); + + /* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */ + GPIO_PinInit(GPIO1, 9U, &USER_LED_config); + + /* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on WAKEUP (pin L6) */ + GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U); + IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U); + IOMUXC_SetPinConfig(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0x01B0A0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0x10B0U); +#else + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0x10B0U); +#else + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U); +#endif +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSDRAMPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09} + - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10} + - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11} + - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12} + - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13} + - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14} + - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15} + - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16} + - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17} + - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18} + - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23} + - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19} + - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20} + - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21} + - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22} + - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24} + - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27} + - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26} + - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00} + - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01} + - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02} + - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03} + - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04} + - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05} + - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06} + - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07} + - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30} + - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31} + - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32} + - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33} + - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34} + - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35} + - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36} + - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37} + - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08} + - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38} + - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25} + - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28} + - {pin_num: C7, peripheral: SEMC, signal: 'CSX, 0', pin_signal: GPIO_EMC_41} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSDRAMPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSDRAMPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U); +#endif + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U); +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U); +#endif + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U); +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_SEMC_CSX0, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_SEMC_CSX00, 0U); +#endif +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCSIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08} + - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09} + - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10} + - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11} + - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12} + - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13} + - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15} + - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14} + - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04} + - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05} + - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06} + - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07} + - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCSIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCSIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLCDPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLCDPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitLCDPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCANPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14} + - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCANPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCANPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitENETPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40} + - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41} + - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10} + - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04} + - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05} + - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06} + - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11} + - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07} + - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08} + - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitENETPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitENETPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05} + - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04} + - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03} + - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02} + - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00} + - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitHyperFlashPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10} + - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09} + - {pin_num: L5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA3, pin_signal: GPIO_SD_B1_00} + - {pin_num: M5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA2, pin_signal: GPIO_SD_B1_01} + - {pin_num: M3, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA1, pin_signal: GPIO_SD_B1_02} + - {pin_num: M4, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA0, pin_signal: GPIO_SD_B1_03} + - {pin_num: P2, peripheral: FLEXSPI, signal: FLEXSPI_B_SCLK, pin_signal: GPIO_SD_B1_04} + - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06} + - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11} + - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitHyperFlashPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitHyperFlashPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXSPIB_DATA03, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXSPIB_DATA02, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_FLEXSPIB_DATA01, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_03_FLEXSPIB_DATA00, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_04_FLEXSPIB_SCLK, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U); +#endif +#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3) + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3, 0U); +#else + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U); +#endif +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h new file mode 100644 index 000000000..3d3a7a93c --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h @@ -0,0 +1,761 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 9U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 9U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 9U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 9U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 9U) /*!< PORT pin mask */ + +/* WAKEUP (coord L6), SD_PWREN */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO5 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 0U) /*!< PORT pin mask */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_12 (coord K14), UART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_13 (coord L14), UART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_EMC_09 (coord C2), SEMC_A0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_10 (coord G1), SEMC_A1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_11 (coord G3), SEMC_A2 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_12 (coord H1), SEMC_A3 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_13 (coord A6), SEMC_A4 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_14 (coord B6), SEMC_A5 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_15 (coord B1), SEMC_A6 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_16 (coord A5), SEMC_A7 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_17 (coord A4), SEMC_A8 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_18 (coord B2), SEMC_A9 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_23 (coord G2), SEMC_A10 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_19 (coord B4), SEMC_A11 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_20 (coord A3), SEMC_A12 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_21 (coord C1), SEMC_BA0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_22 (coord F1), SEMC_BA1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_24 (coord D3), SEMC_CAS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */ + +/* GPIO_EMC_27 (coord A2), SEMC_CKE */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */ + +/* GPIO_EMC_26 (coord B3), SEMC_CLK */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */ + +/* GPIO_EMC_00 (coord E3), SEMC_D0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_01 (coord F3), SEMC_D1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_02 (coord F4), SEMC_D2 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_03 (coord G4), SEMC_D3 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_04 (coord F2), SEMC_D4 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_05 (coord G5), SEMC_D5 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_06 (coord H5), SEMC_D6 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_07 (coord H4), SEMC_D7 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_30 (coord C6), SEMC_D8 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_31 (coord C5), SEMC_D9 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_32 (coord D5), SEMC_D10 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_33 (coord C4), SEMC_D11 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_34 (coord D4), SEMC_D12 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_35 (coord E5), SEMC_D13 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_EMC_36 (coord C3), SEMC_D14 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_EMC_37 (coord E4), SEMC_D15 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_EMC_08 (coord H3), SEMC_DM0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_38 (coord D6), SEMC_DM1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_25 (coord D2), SEMC_RAS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */ + +/* GPIO_EMC_28 (coord D1), SEMC_WE */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */ + +/* GPIO_EMC_41 (coord C7), ENET_MDIO */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_ENET_MDIO_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_ENET_MDIO_SIGNAL CSX /*!< Signal name */ +#define BOARD_INITSDRAMPINS_ENET_MDIO_CHANNEL 0U /*!< Signal channel */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSDRAMPins(void); + +/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D9_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D8_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D7_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D6_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D5_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D4_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D2_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D3_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL csi_pixclk /*!< Signal name */ + +/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL csi_mclk /*!< Signal name */ + +/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL csi_vsync /*!< Signal name */ + +/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL csi_hsync /*!< Signal name */ + +/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL LPI2C1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL SCL /*!< Signal name */ + +/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL LPI2C1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL SDA /*!< Signal name */ + +/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL 4U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN 4U /*!< GPIO pin number */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */ +#define BOARD_INITCSIPINS_CSI_PWDN_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITCSIPINS_CSI_PWDN_PIN 4U /*!< PORT pin number */ +#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK (1U << 4U) /*!< PORT pin mask */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCSIPins(void); + +/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_B0_00 (coord D7), LCDIF_CLK */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< Signal name */ + +/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_B1_00 (coord A11), LCDIF_D12 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_B1_01 (coord B11), LCDIF_D13 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_B1_02 (coord C11), LCDIF_D14 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_B1_03 (coord D11), LCDIF_D15 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< Signal name */ + +/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< Signal name */ + +/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< Signal name */ + +/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL 31U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN 31U /*!< GPIO pin number */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK (1U << 31U) /*!< GPIO pin mask */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN 31U /*!< PORT pin number */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK (1U << 31U) /*!< PORT pin mask */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLCDPins(void); + +/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL CAN2 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN2_TX_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL CAN2 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN2_RX_SIGNAL RX /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCANPins(void); + +/* GPIO_EMC_40 (coord A7), ENET_MDC */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */ + +/* GPIO_EMC_41 (coord C7), ENET_MDIO */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */ + +/* GPIO_B1_10 (coord B13), ENET_TX_CLK */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_ref_clk /*!< Signal name */ + +/* GPIO_B1_04 (coord E12), ENET_RXD0 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B1_05 (coord D12), ENET_RXD1 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B1_06 (coord C12), ENET_CRS_DV */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */ + +/* GPIO_B1_11 (coord C13), ENET_RXER */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */ + +/* GPIO_B1_07 (coord B12), ENET_TXD0 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B1_08 (coord A12), ENET_TXD1 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B1_09 (coord A13), ENET_TXEN */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitENETPins(void); + +/* GPIO_SD_B0_05 (coord J2), SD1_D3 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_SD_B0_04 (coord H2), SD1_D2 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */ + +/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_00 (coord L5), FlexSPI_D3_B */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_B_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_B_SIGNAL FLEXSPI_B_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_01 (coord M5), FlexSPI_D2_B */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_B_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_B_SIGNAL FLEXSPI_B_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_02 (coord M3), FlexSPI_D1_B */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_B_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_B_SIGNAL FLEXSPI_B_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_03 (coord M4), FlexSPI_D0_B */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_B_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_B_SIGNAL FLEXSPI_B_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_04 (coord P2), FlexSPI_CLK_B */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_B_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_B_SIGNAL FLEXSPI_B_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + +/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */ +/* Routed pin properties */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITHYPERFLASHPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */ + + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitHyperFlashPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex index c0a5b5660..6bdfd46a1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -37,13 +41,41 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. @@ -712,7 +744,7 @@ - + diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 10c196e1a..ecde39611 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -139,4 +139,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_jlink(${TARGET}) #family_flash_nxplink(${TARGET}) + #family_flash_pyocd(${TARGET}) endfunction() From baa1b4ec20f479a351f59e4d621f8a6818b877dd Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 20:12:08 +0700 Subject: [PATCH 58/82] correct and tested rt1050 evkb --- hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 1 + hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 853cdf9ab..7c333d8f5 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -43,5 +43,6 @@ // UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, IOMUXC_GPIO_AD_B0_12_LPUART1_TXD #define UART_PORT LPUART1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 0f45f72e1..253872870 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -31,13 +31,13 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x800000U) -// LED +// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 #define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 #define LED_PORT GPIO1 #define LED_PIN 9 #define LED_STATE_ON 0 -// SW8 button +// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00 #define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 #define BUTTON_PORT GPIO5 #define BUTTON_PIN 0 From 68f1841e3c66d48b53f7e0200758db143965dca6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 20:28:41 +0700 Subject: [PATCH 59/82] update rt1060 and rt1064 evk --- hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 15 +- .../boards/mimxrt1060_evk/board/pin_mux.c | 497 ++++++++++++ .../boards/mimxrt1060_evk/board/pin_mux.h | 744 ++++++++++++++++++ .../boards/mimxrt1060_evk/mimxrt1060_evk.mex | 35 +- hw/bsp/imxrt/boards/mimxrt1064_evk/board.h | 20 +- .../boards/mimxrt1064_evk/board/pin_mux.c | 497 ++++++++++++ .../boards/mimxrt1064_evk/board/pin_mux.h | 744 ++++++++++++++++++ .../boards/mimxrt1064_evk/mimxrt1064_evk.mex | 35 +- 8 files changed, 2562 insertions(+), 25 deletions(-) create mode 100644 hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 253872870..8b7dba80a 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -32,20 +32,17 @@ #define BOARD_FLASH_SIZE (0x800000U) // LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIO1 -#define LED_PIN 9 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 // SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX #define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c new file mode 100644 index 000000000..5d679709e --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c @@ -0,0 +1,497 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1062xxxxA +package_id: MIMXRT1062DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1060-EVK +pin_labels: +- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED} +- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper} + - {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + CLOCK_EnableClock(kCLOCK_IomuxcSnvs); + + /* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */ + GPIO_PinInit(GPIO1, 9U, &USER_LED_config); + + /* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on WAKEUP (pin L6) */ + GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSDRAMPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09} + - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10} + - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11} + - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12} + - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13} + - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14} + - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15} + - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16} + - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17} + - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18} + - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23} + - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19} + - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20} + - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21} + - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22} + - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24} + - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27} + - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26} + - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00} + - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01} + - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02} + - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03} + - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04} + - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05} + - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06} + - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07} + - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30} + - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31} + - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32} + - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33} + - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34} + - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35} + - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36} + - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37} + - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08} + - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38} + - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25} + - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28} + - {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29} + - {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSDRAMPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSDRAMPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCSIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08} + - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09} + - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10} + - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11} + - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12} + - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13} + - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15} + - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14} + - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04} + - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05} + - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06} + - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07} + - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCSIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCSIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLCDPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow} + - {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLCDPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitLCDPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U) + ); + IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 & + (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCANPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14} + - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCANPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCANPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitENETPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40} + - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41} + - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10} + - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04} + - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05} + - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06} + - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11} + - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07} + - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08} + - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitENETPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitENETPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05} + - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04} + - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03} + - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02} + - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00} + - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01} + - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09} + - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10} + - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11} + - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06} + - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h new file mode 100644 index 000000000..bf494b6f6 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h @@ -0,0 +1,744 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x0200U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */ + +/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 9U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 9U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 9U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 9U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 9U) /*!< PORT pin mask */ + +/* WAKEUP (coord L6), SD_PWREN */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO5 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 0U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_12 (coord K14), UART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_13 (coord L14), UART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_EMC_09 (coord C2), SEMC_A0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_10 (coord G1), SEMC_A1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_11 (coord G3), SEMC_A2 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_12 (coord H1), SEMC_A3 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_13 (coord A6), SEMC_A4 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_14 (coord B6), SEMC_A5 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_15 (coord B1), SEMC_A6 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_16 (coord A5), SEMC_A7 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_17 (coord A4), SEMC_A8 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_18 (coord B2), SEMC_A9 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_23 (coord G2), SEMC_A10 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_19 (coord B4), SEMC_A11 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_20 (coord A3), SEMC_A12 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_21 (coord C1), SEMC_BA0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_22 (coord F1), SEMC_BA1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_24 (coord D3), SEMC_CAS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */ + +/* GPIO_EMC_27 (coord A2), SEMC_CKE */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */ + +/* GPIO_EMC_26 (coord B3), SEMC_CLK */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */ + +/* GPIO_EMC_00 (coord E3), SEMC_D0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_01 (coord F3), SEMC_D1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_02 (coord F4), SEMC_D2 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_03 (coord G4), SEMC_D3 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_04 (coord F2), SEMC_D4 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_05 (coord G5), SEMC_D5 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_06 (coord H5), SEMC_D6 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_07 (coord H4), SEMC_D7 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_30 (coord C6), SEMC_D8 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_31 (coord C5), SEMC_D9 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_32 (coord D5), SEMC_D10 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_33 (coord C4), SEMC_D11 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_34 (coord D4), SEMC_D12 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_35 (coord E5), SEMC_D13 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_EMC_36 (coord C3), SEMC_D14 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_EMC_37 (coord E4), SEMC_D15 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_EMC_08 (coord H3), SEMC_DM0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_38 (coord D6), SEMC_DM1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_25 (coord D2), SEMC_RAS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */ + +/* GPIO_EMC_28 (coord D1), SEMC_WE */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */ + +/* GPIO_EMC_29 (coord E1), SEMC_CS0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL CS /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_39 (coord B7), SEMC_DQS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL semc_dqs /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSDRAMPins(void); + +#define BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x10U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */ + +/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D9_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D8_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D7_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D6_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D5_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D4_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D2_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D3_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL csi_pixclk /*!< Signal name */ + +/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL csi_mclk /*!< Signal name */ + +/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL csi_vsync /*!< Signal name */ + +/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL csi_hsync /*!< Signal name */ + +/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL LPI2C1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL SCL /*!< Signal name */ + +/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL LPI2C1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL SDA /*!< Signal name */ + +/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL 4U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN 4U /*!< GPIO pin number */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */ +#define BOARD_INITCSIPINS_CSI_PWDN_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITCSIPINS_CSI_PWDN_PIN 4U /*!< PORT pin number */ +#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK (1U << 4U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCSIPins(void); + +#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x04U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */ +#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x80000000U /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */ + +/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_B0_00 (coord D7), LCDIF_CLK */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< Signal name */ + +/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_B1_00 (coord A11), LCDIF_D12 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_B1_01 (coord B11), LCDIF_D13 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_B1_02 (coord C11), LCDIF_D14 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_B1_03 (coord D11), LCDIF_D15 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< Signal name */ + +/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< Signal name */ + +/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< Signal name */ + +/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL 31U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN 31U /*!< GPIO pin number */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK (1U << 31U) /*!< GPIO pin mask */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN 31U /*!< PORT pin number */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK (1U << 31U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLCDPins(void); + +/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL CAN2 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN2_TX_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL CAN2 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN2_RX_SIGNAL RX /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCANPins(void); + +/* GPIO_EMC_40 (coord A7), ENET_MDC */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */ + +/* GPIO_EMC_41 (coord C7), ENET_MDIO */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */ + +/* GPIO_B1_10 (coord B13), ENET_TX_CLK */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_ref_clk /*!< Signal name */ + +/* GPIO_B1_04 (coord E12), ENET_RXD0 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B1_05 (coord D12), ENET_RXD1 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B1_06 (coord C12), ENET_CRS_DV */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */ + +/* GPIO_B1_11 (coord C13), ENET_RXER */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */ + +/* GPIO_B1_07 (coord B12), ENET_TXD0 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B1_08 (coord A12), ENET_TXD1 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B1_09 (coord A13), ENET_TXEN */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitENETPins(void); + +/* GPIO_SD_B0_05 (coord J2), SD1_D3 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_SD_B0_04 (coord H2), SD1_D2 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */ + +/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */ + +/* GPIO_B1_14 (coord C14), SD0_VSELECT */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL usdhc_vselect /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + +/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex index 39b3ed606..b9353ba44 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -37,13 +41,40 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. @@ -717,7 +748,7 @@ - + diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index 37ad94eef..fa45b9071 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -31,22 +31,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x400000U) -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIO1 -#define LED_PIN 9 +// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 +// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX #define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX - +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c new file mode 100644 index 000000000..8e975dc72 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c @@ -0,0 +1,497 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1064xxxxA +package_id: MIMXRT1064DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1064-EVK +pin_labels: +- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED} +- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper} + - {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + CLOCK_EnableClock(kCLOCK_IomuxcSnvs); + + /* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */ + GPIO_PinInit(GPIO1, 9U, &USER_LED_config); + + /* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on WAKEUP (pin L6) */ + GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSDRAMPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09} + - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10} + - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11} + - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12} + - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13} + - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14} + - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15} + - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16} + - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17} + - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18} + - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23} + - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19} + - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20} + - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21} + - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22} + - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24} + - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27} + - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26} + - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00} + - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01} + - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02} + - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03} + - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04} + - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05} + - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06} + - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07} + - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30} + - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31} + - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32} + - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33} + - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34} + - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35} + - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36} + - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37} + - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08} + - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38} + - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25} + - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28} + - {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29} + - {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSDRAMPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSDRAMPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCSIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08} + - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09} + - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10} + - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11} + - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12} + - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13} + - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15} + - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14} + - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04} + - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05} + - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06} + - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07} + - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCSIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCSIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLCDPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow} + - {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLCDPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitLCDPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U); + IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 & + (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U) + ); + IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 & + (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitCANPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14} + - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitCANPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitCANPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitENETPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40} + - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41} + - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10} + - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04} + - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05} + - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06} + - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11} + - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07} + - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08} + - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitENETPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitENETPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05} + - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04} + - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03} + - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02} + - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00} + - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01} + - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09} + - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10} + - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11} + - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06} + - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h new file mode 100644 index 000000000..bf494b6f6 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h @@ -0,0 +1,744 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x0200U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */ + +/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 9U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 9U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 9U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 9U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 9U) /*!< PORT pin mask */ + +/* WAKEUP (coord L6), SD_PWREN */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO5 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 0U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_12 (coord K14), UART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_13 (coord L14), UART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_EMC_09 (coord C2), SEMC_A0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_10 (coord G1), SEMC_A1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_11 (coord G3), SEMC_A2 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_12 (coord H1), SEMC_A3 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_13 (coord A6), SEMC_A4 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_14 (coord B6), SEMC_A5 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_15 (coord B1), SEMC_A6 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_16 (coord A5), SEMC_A7 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_17 (coord A4), SEMC_A8 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_18 (coord B2), SEMC_A9 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_23 (coord G2), SEMC_A10 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_19 (coord B4), SEMC_A11 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_20 (coord A3), SEMC_A12 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_21 (coord C1), SEMC_BA0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_22 (coord F1), SEMC_BA1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_24 (coord D3), SEMC_CAS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */ + +/* GPIO_EMC_27 (coord A2), SEMC_CKE */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */ + +/* GPIO_EMC_26 (coord B3), SEMC_CLK */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */ + +/* GPIO_EMC_00 (coord E3), SEMC_D0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_01 (coord F3), SEMC_D1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_02 (coord F4), SEMC_D2 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_EMC_03 (coord G4), SEMC_D3 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_EMC_04 (coord F2), SEMC_D4 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_EMC_05 (coord G5), SEMC_D5 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_EMC_06 (coord H5), SEMC_D6 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_EMC_07 (coord H4), SEMC_D7 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_EMC_30 (coord C6), SEMC_D8 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_EMC_31 (coord C5), SEMC_D9 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_EMC_32 (coord D5), SEMC_D10 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_EMC_33 (coord C4), SEMC_D11 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_EMC_34 (coord D4), SEMC_D12 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_EMC_35 (coord E5), SEMC_D13 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_EMC_36 (coord C3), SEMC_D14 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_EMC_37 (coord E4), SEMC_D15 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_EMC_08 (coord H3), SEMC_DM0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_38 (coord D6), SEMC_DM1 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_EMC_25 (coord D2), SEMC_RAS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */ + +/* GPIO_EMC_28 (coord D1), SEMC_WE */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */ + +/* GPIO_EMC_29 (coord E1), SEMC_CS0 */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL CS /*!< Signal name */ +#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_EMC_39 (coord B7), SEMC_DQS */ +/* Routed pin properties */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL SEMC /*!< Peripheral name */ +#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL semc_dqs /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSDRAMPins(void); + +#define BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x10U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */ + +/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D9_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D8_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D7_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D6_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D5_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D4_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D2_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_D3_SIGNAL csi_data /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL csi_pixclk /*!< Signal name */ + +/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL csi_mclk /*!< Signal name */ + +/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL csi_vsync /*!< Signal name */ + +/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL CSI /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL csi_hsync /*!< Signal name */ + +/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL LPI2C1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL SCL /*!< Signal name */ + +/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL LPI2C1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL SDA /*!< Signal name */ + +/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */ +/* Routed pin properties */ +#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL GPIO1 /*!< Peripheral name */ +#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL 4U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO GPIO1 /*!< GPIO peripheral base pointer */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN 4U /*!< GPIO pin number */ +#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */ +#define BOARD_INITCSIPINS_CSI_PWDN_PORT GPIO1 /*!< PORT peripheral base pointer */ +#define BOARD_INITCSIPINS_CSI_PWDN_PIN 4U /*!< PORT pin number */ +#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK (1U << 4U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCSIPins(void); + +#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x04U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */ +#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x80000000U /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */ + +/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_B0_00 (coord D7), LCDIF_CLK */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< Signal name */ + +/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL 4U /*!< Signal channel */ + +/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL 5U /*!< Signal channel */ + +/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL 6U /*!< Signal channel */ + +/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL 7U /*!< Signal channel */ + +/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL 8U /*!< Signal channel */ + +/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL 9U /*!< Signal channel */ + +/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL 10U /*!< Signal channel */ + +/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL 11U /*!< Signal channel */ + +/* GPIO_B1_00 (coord A11), LCDIF_D12 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL 12U /*!< Signal channel */ + +/* GPIO_B1_01 (coord B11), LCDIF_D13 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL 13U /*!< Signal channel */ + +/* GPIO_B1_02 (coord C11), LCDIF_D14 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL 14U /*!< Signal channel */ + +/* GPIO_B1_03 (coord D11), LCDIF_D15 */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL lcdif_data /*!< Signal name */ +#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL 15U /*!< Signal channel */ + +/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< Signal name */ + +/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< Signal name */ + +/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Peripheral name */ +#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< Signal name */ + +/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */ +/* Routed pin properties */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL 31U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN 31U /*!< GPIO pin number */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK (1U << 31U) /*!< GPIO pin mask */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN 31U /*!< PORT pin number */ +#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK (1U << 31U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLCDPins(void); + +/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL CAN2 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN2_TX_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */ +/* Routed pin properties */ +#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL CAN2 /*!< Peripheral name */ +#define BOARD_INITCANPINS_CAN2_RX_SIGNAL RX /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitCANPins(void); + +/* GPIO_EMC_40 (coord A7), ENET_MDC */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */ + +/* GPIO_EMC_41 (coord C7), ENET_MDIO */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */ + +/* GPIO_B1_10 (coord B13), ENET_TX_CLK */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_ref_clk /*!< Signal name */ + +/* GPIO_B1_04 (coord E12), ENET_RXD0 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B1_05 (coord D12), ENET_RXD1 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B1_06 (coord C12), ENET_CRS_DV */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */ + +/* GPIO_B1_11 (coord C13), ENET_RXER */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */ + +/* GPIO_B1_07 (coord B12), ENET_TXD0 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_B1_08 (coord A12), ENET_TXD1 */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */ +#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_B1_09 (coord A13), ENET_TXEN */ +/* Routed pin properties */ +#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */ +#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitENETPins(void); + +/* GPIO_SD_B0_05 (coord J2), SD1_D3 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_SD_B0_04 (coord H2), SD1_D2 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */ + +/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */ + +/* GPIO_B1_14 (coord C14), SD0_VSELECT */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL usdhc_vselect /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + +/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex index 5e0fc72d3..3f0948101 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -37,13 +41,40 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. @@ -719,7 +750,7 @@ - + From 759f70f092cfb52cdd07363e126ee8f9be5d8993 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 20:43:02 +0700 Subject: [PATCH 60/82] update teensy 4.0 and 4.1 (not tested) --- hw/bsp/imxrt/boards/teensy_40/board.h | 19 +- hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c | 181 ++++++++ hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h | 189 ++++++++ hw/bsp/imxrt/boards/teensy_40/teensy40.mex | 420 ++---------------- hw/bsp/imxrt/boards/teensy_41/board.h | 19 +- hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c | 181 ++++++++ hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h | 189 ++++++++ hw/bsp/imxrt/boards/teensy_41/teensy41.mex | 420 ++---------------- 8 files changed, 826 insertions(+), 792 deletions(-) create mode 100644 hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h create mode 100644 hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c create mode 100644 hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index cac773442..0804721b5 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -32,21 +32,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (2 * 1024 * 1024) -// LED -#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 -#define LED_PORT GPIO2 -#define LED_PIN 3 +// LED D13: IOMUXC_GPIO_B0_03_GPIO2_IO03 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// no button -#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 1 +// no button D12: IOMUXC_GPIO_B0_01_GPIO2_IO01 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART D0, D1: IOMUXC_GPIO_AD_B0_03_LPUART6_RX, IOMUXC_GPIO_AD_B0_02_LPUART6_TX #define UART_PORT LPUART6 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c new file mode 100644 index 000000000..4c16be993 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c @@ -0,0 +1,181 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1062xxxxA +package_id: MIMXRT1062DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1060-EVK +pin_labels: +- {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: USER_BUTTON} +- {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: USER_LED} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: D8, peripheral: GPIO2, signal: 'gpio_io, 03', pin_signal: GPIO_B0_03, direction: OUTPUT} + - {pin_num: E7, peripheral: GPIO2, signal: 'gpio_io, 01', pin_signal: GPIO_B0_01, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + /* GPIO configuration of USER_BUTTON on GPIO_B0_01 (pin E7) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_B0_01 (pin E7) */ + GPIO_PinInit(GPIO2, 1U, &USER_BUTTON_config); + + /* GPIO configuration of USER_LED on GPIO_B0_03 (pin D8) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_B0_03 (pin D8) */ + GPIO_PinInit(GPIO2, 3U, &USER_LED_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_GPIO2_IO03, 0U); + IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0xB0B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05} + - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04} + - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03} + - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02} + - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00} + - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01} + - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09} + - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10} + - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11} + - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06} + - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h new file mode 100644 index 000000000..f31f91598 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h @@ -0,0 +1,189 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x0AU /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */ + +/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 3U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 3U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 3U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 3U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 3U) /*!< PORT pin mask */ + +/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 1U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 1U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 1U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 1U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 1U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_12 (coord K14), UART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_13 (coord L14), UART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_SD_B0_05 (coord J2), SD1_D3 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_SD_B0_04 (coord H2), SD1_D2 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */ + +/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */ + +/* GPIO_B1_14 (coord C14), SD0_VSELECT */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL usdhc_vselect /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + +/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40.mex b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex index 39b3ed606..1ade853ae 100644 --- a/hw/bsp/imxrt/boards/teensy_40/teensy40.mex +++ b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -37,13 +41,41 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. @@ -98,385 +130,6 @@ - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. @@ -717,11 +370,8 @@ - - - - - + + 13.0.2 diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index 72c18f540..2ffb25497 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -32,21 +32,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (8 * 1024 * 1024) -// LED -#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 -#define LED_PORT GPIO2 -#define LED_PIN 3 +// LED D13: IOMUXC_GPIO_B0_03_GPIO2_IO03 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// no button -#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 1 +// no button D12: IOMUXC_GPIO_B0_01_GPIO2_IO01 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART D0, D1: IOMUXC_GPIO_AD_B0_03_LPUART6_RX, IOMUXC_GPIO_AD_B0_02_LPUART6_TX #define UART_PORT LPUART6 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c new file mode 100644 index 000000000..4c16be993 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c @@ -0,0 +1,181 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MIMXRT1062xxxxA +package_id: MIMXRT1062DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1060-EVK +pin_labels: +- {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: USER_BUTTON} +- {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: USER_LED} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +#include "fsl_common.h" +#include "fsl_iomuxc.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) { + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); +} + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: D8, peripheral: GPIO2, signal: 'gpio_io, 03', pin_signal: GPIO_B0_03, direction: OUTPUT} + - {pin_num: E7, peripheral: GPIO2, signal: 'gpio_io, 01', pin_signal: GPIO_B0_01, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + /* GPIO configuration of USER_BUTTON on GPIO_B0_01 (pin E7) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_B0_01 (pin E7) */ + GPIO_PinInit(GPIO2, 1U, &USER_BUTTON_config); + + /* GPIO configuration of USER_LED on GPIO_B0_03 (pin D8) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_B0_03 (pin D8) */ + GPIO_PinInit(GPIO2, 3U, &USER_LED_config); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_GPIO2_IO03, 0U); + IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 & + (~(BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK))) + | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U) + ); + IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0xB0B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, + pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U); + IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSDHCPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05} + - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04} + - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03} + - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02} + - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00} + - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01} + - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSDHCPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitUSDHCPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U); +} + + +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitQSPIPins: +- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} + - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09} + - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10} + - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11} + - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} + - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06} + - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitQSPIPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitQSPIPins(void) { + CLOCK_EnableClock(kCLOCK_Iomuxc); + + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U); + IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U); +} + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h new file mode 100644 index 000000000..f31f91598 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h @@ -0,0 +1,189 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ + +/*! @brief Direction type */ +typedef enum _pin_mux_direction +{ + kPIN_MUX_DirectionInput = 0U, /* Input direction */ + kPIN_MUX_DirectionOutput = 1U, /* Output direction */ + kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */ +} pin_mux_direction_t; + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x0AU /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */ + +/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 3U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 3U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 3U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_PIN 3U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 3U) /*!< PORT pin mask */ + +/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */ +/* Routed pin properties */ +#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO2 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_BUTTON_CHANNEL 1U /*!< Signal channel */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO2 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 1U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 1U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT GPIO2 /*!< PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 1U /*!< PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 1U) /*!< PORT pin mask */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +/* GPIO_AD_B0_12 (coord K14), UART1_TXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */ + +/* GPIO_AD_B0_13 (coord L14), UART1_RXD */ +/* Routed pin properties */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */ +#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/* GPIO_SD_B0_05 (coord J2), SD1_D3 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */ + +/* GPIO_SD_B0_04 (coord H2), SD1_D2 */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */ + +/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */ + +/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */ +#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */ + +/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */ + +/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */ + +/* GPIO_B1_14 (coord C14), SD0_VSELECT */ +/* Routed pin properties */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL USDHC1 /*!< Peripheral name */ +#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL usdhc_vselect /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSDHCPins(void); + +/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */ + +/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */ + +/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */ + +/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */ + +/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */ + +/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */ + +/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */ +/* Routed pin properties */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */ +#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitQSPIPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41.mex b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex index 39b3ed606..1ade853ae 100644 --- a/hw/bsp/imxrt/boards/teensy_41/teensy41.mex +++ b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex @@ -26,6 +26,10 @@ 13.0.2 + + + + @@ -37,13 +41,41 @@ true + + + true + + true + + + true + + + + + true + + - + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. @@ -98,385 +130,6 @@ - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - Configures pin routing and optionally pin electrical features. - - false - core0 - true - - - - - true - - - - - true - - - - - true - - - - - - - - - - - - - - - - Configures pin routing and optionally pin electrical features. @@ -717,11 +370,8 @@ - - - - - + + 13.0.2 From 936551ebd157e1b4d259b87549cf337b056c3746 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 21:35:12 +0700 Subject: [PATCH 61/82] update rt1170 evk with led and button, but usb not working yet --- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h | 23 +++++---------- .../boards/mimxrt1170_evkb/board/pin_mux.c | 29 +++++++++++++++---- .../boards/mimxrt1170_evkb/board/pin_mux.h | 12 ++++---- .../mimxrt1170_evkb/mimxrt1170_evkb.mex | 14 +++++++-- hw/bsp/imxrt/family.c | 9 +----- 6 files changed, 51 insertions(+), 38 deletions(-) diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index b65d8f1f9..2bc5491bb 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -59,7 +59,7 @@ #define configTICK_RATE_HZ ( 1000 ) #define configMAX_PRIORITIES ( 5 ) #define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) #define configMAX_TASK_NAME_LEN 16 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h index 0ff82e131..0b6b462e7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h @@ -31,25 +31,18 @@ // required since iMX RT10xx SDK include this file for board size #define BOARD_FLASH_SIZE (0x1000000U) -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_04_GPIO9_IO03 -#define LED_PORT GPIO9 -#define LED_PIN 3 +// LED: IOMUXC_GPIO_AD_04_GPIO9_IO03 +#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL +#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL #define LED_STATE_ON 0 -// SW8 button -#define BUTTON_PINMUX IOMUXC_WAKEUP_DIG_GPIO13_IO00 -#define BUTTON_PORT GPIO13 -#define BUTTON_PIN 0 +// SW8 button: IOMUXC_WAKEUP_DIG_GPIO13_IO00 +#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL +#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL #define BUTTON_STATE_ACTIVE 0 -// UART +// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX #define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX - -static inline uint32_t board_uart_get_clock(void) { - return CLOCK_GetRootClockFreq(kCLOCK_Root_Lpuart1); -} +#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT #endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c index aaa8a5ebb..b70a7c5bd 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c @@ -14,12 +14,13 @@ processor_version: 13.0.2 board: MIMXRT1170-EVKB external_user_signals: {} pin_labels: -- {pin_num: M13, pin_signal: GPIO_AD_04, label: 'SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7]', identifier: SIM1_PD;LED} +- {pin_num: M13, pin_signal: GPIO_AD_04, label: 'SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7]', identifier: SIM1_PD;LED;USER_LED} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ #include "fsl_common.h" #include "fsl_iomuxc.h" +#include "fsl_gpio.h" #include "pin_mux.h" /* FUNCTION ************************************************************************************************************ @@ -41,8 +42,8 @@ BOARD_InitPins: open_drain: Disable, drive_strength: High, slew_rate: Slow} - {pin_num: L13, peripheral: LPUART1, signal: TXD, pin_signal: GPIO_AD_24, software_input_on: Disable, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper, open_drain: Disable, drive_strength: High, slew_rate: Slow} - - {pin_num: M13, peripheral: GPIO9, signal: 'gpio_io, 03', pin_signal: GPIO_AD_04, identifier: LED, pull_up_down_config: Pull_Down} - - {pin_num: T8, peripheral: GPIO13, signal: 'gpio_io, 00', pin_signal: WAKEUP, pull_up_down_config: Pull_Up} + - {pin_num: M13, peripheral: GPIO9, signal: 'gpio_io, 03', pin_signal: GPIO_AD_04, identifier: USER_LED, direction: OUTPUT, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper} + - {pin_num: T8, peripheral: GPIO13, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT, pull_up_down_config: Pull_Up} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ @@ -55,6 +56,24 @@ BOARD_InitPins: void BOARD_InitPins(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */ + /* GPIO configuration of USER_LED on GPIO_AD_04 (pin M13) */ + gpio_pin_config_t USER_LED_config = { + .direction = kGPIO_DigitalOutput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on GPIO_AD_04 (pin M13) */ + GPIO_PinInit(GPIO9, 3U, &USER_LED_config); + + /* GPIO configuration of USER_BUTTON on WAKEUP_DIG (pin T8) */ + gpio_pin_config_t USER_BUTTON_config = { + .direction = kGPIO_DigitalInput, + .outputLogic = 0U, + .interruptMode = kGPIO_NoIntmode + }; + /* Initialize GPIO functionality on WAKEUP_DIG (pin T8) */ + GPIO_PinInit(GPIO13, 0U, &USER_BUTTON_config); + IOMUXC_SetPinMux( IOMUXC_GPIO_AD_04_GPIO9_IO03, /* GPIO_AD_04 is configured as GPIO9_IO03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ @@ -69,9 +88,9 @@ void BOARD_InitPins(void) { 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_04_GPIO9_IO03, /* GPIO_AD_04 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate + 0x02U); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable + Pull / Keep Select Field: Pull Disable, Highz Pull Up / Down Config. Field: Weak pull down Open Drain Field: Disabled Domain write protection: Both cores are allowed diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h index c778f487b..550bd1474 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h @@ -37,14 +37,14 @@ void BOARD_InitBootPins(void); /* GPIO_AD_04 (coord M13), SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7] */ /* Routed pin properties */ -#define BOARD_INITPINS_LED_PERIPHERAL GPIO9 /*!< Peripheral name */ -#define BOARD_INITPINS_LED_SIGNAL gpio_io /*!< Signal name */ -#define BOARD_INITPINS_LED_CHANNEL 3U /*!< Signal channel */ +#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO9 /*!< Peripheral name */ +#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */ +#define BOARD_INITPINS_USER_LED_CHANNEL 3U /*!< Signal channel */ /* Symbols to be used with GPIO driver */ -#define BOARD_INITPINS_LED_GPIO GPIO9 /*!< GPIO peripheral base pointer */ -#define BOARD_INITPINS_LED_GPIO_PIN 3U /*!< GPIO pin number */ -#define BOARD_INITPINS_LED_GPIO_PIN_MASK (1U << 3U) /*!< GPIO pin mask */ +#define BOARD_INITPINS_USER_LED_GPIO GPIO9 /*!< GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN 3U /*!< GPIO pin number */ +#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 3U) /*!< GPIO pin mask */ /* WAKEUP (coord T8), USER_BUTTON */ /* Routed pin properties */ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex index 721a3504b..9b87a805d 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex @@ -27,7 +27,7 @@ 13.0.2 - + @@ -58,6 +58,11 @@ true + + + true + + @@ -82,12 +87,15 @@ - + + + + @@ -364,7 +372,7 @@ - + diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 61d7e9bb2..a9ba00305 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -91,7 +91,7 @@ void board_init(void) SystemCoreClockUpdate(); #ifdef TRACE_ETM - CLOCK_EnableClock(kCLOCK_Trace); + //CLOCK_EnableClock(kCLOCK_Trace); #endif #if CFG_TUSB_OS == OPT_OS_NONE @@ -115,13 +115,6 @@ void board_init(void) uart_config.enableTx = true; uart_config.enableRx = true; -// uint32_t freq = board_uart_get_clock(); -// if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */ { -// freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); -// } else { -// freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); -// } - if ( kStatus_Success != LPUART_Init(UART_PORT, &uart_config, UART_CLK_ROOT) ) { // failed to init uart, probably baudrate is not supported // TU_BREAKPOINT(); From e666a39dd7869529fff56717ca68bd4a326a679a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 21:37:30 +0700 Subject: [PATCH 62/82] update clion setting --- .idea/cmake.xml | 3 ++- .idea/runConfigurations/kl25.xml | 2 +- .idea/runConfigurations/lpc1857.xml | 2 +- .idea/runConfigurations/lpc4088.xml | 2 +- .idea/runConfigurations/lpc54628.xml | 2 +- .idea/runConfigurations/lpc55s69.xml | 2 +- .idea/runConfigurations/mcx947.xml | 2 +- .idea/runConfigurations/nrf52840.xml | 2 +- .idea/runConfigurations/nrf5340.xml | 2 +- .idea/runConfigurations/ra4m1.xml | 2 +- .idea/runConfigurations/ra6m1.xml | 2 +- .idea/runConfigurations/ra6m5.xml | 2 +- .idea/runConfigurations/rt1010.xml | 2 +- .idea/runConfigurations/rt1060.xml | 2 +- .idea/runConfigurations/samd21g18.xml | 2 +- .idea/runConfigurations/samd51j19.xml | 2 +- .idea/runConfigurations/stlink.xml | 4 ++-- .idea/runConfigurations/stm32g474.xml | 2 +- .idea/runConfigurations/stm32h743.xml | 2 +- .idea/runConfigurations/uno_r4.xml | 2 +- 20 files changed, 22 insertions(+), 21 deletions(-) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 73a479c32..311c3ccb9 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -44,10 +44,11 @@ - + + diff --git a/.idea/runConfigurations/kl25.xml b/.idea/runConfigurations/kl25.xml index 66f8ea684..5aace3a60 100644 --- a/.idea/runConfigurations/kl25.xml +++ b/.idea/runConfigurations/kl25.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc1857.xml b/.idea/runConfigurations/lpc1857.xml index f7d4ba402..a60b481eb 100644 --- a/.idea/runConfigurations/lpc1857.xml +++ b/.idea/runConfigurations/lpc1857.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc4088.xml b/.idea/runConfigurations/lpc4088.xml index 911876903..767d98602 100644 --- a/.idea/runConfigurations/lpc4088.xml +++ b/.idea/runConfigurations/lpc4088.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc54628.xml b/.idea/runConfigurations/lpc54628.xml index e0047f187..e425e2387 100644 --- a/.idea/runConfigurations/lpc54628.xml +++ b/.idea/runConfigurations/lpc54628.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc55s69.xml b/.idea/runConfigurations/lpc55s69.xml index d5e9b117a..27743d980 100644 --- a/.idea/runConfigurations/lpc55s69.xml +++ b/.idea/runConfigurations/lpc55s69.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/mcx947.xml b/.idea/runConfigurations/mcx947.xml index 31e5c27dd..2ff405739 100644 --- a/.idea/runConfigurations/mcx947.xml +++ b/.idea/runConfigurations/mcx947.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/nrf52840.xml b/.idea/runConfigurations/nrf52840.xml index 3ffa16385..8053d9b38 100644 --- a/.idea/runConfigurations/nrf52840.xml +++ b/.idea/runConfigurations/nrf52840.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/nrf5340.xml b/.idea/runConfigurations/nrf5340.xml index 2f8009444..4a5a91734 100644 --- a/.idea/runConfigurations/nrf5340.xml +++ b/.idea/runConfigurations/nrf5340.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra4m1.xml b/.idea/runConfigurations/ra4m1.xml index 6135e5cf3..a5c361a2a 100644 --- a/.idea/runConfigurations/ra4m1.xml +++ b/.idea/runConfigurations/ra4m1.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra6m1.xml b/.idea/runConfigurations/ra6m1.xml index 0833d43b3..7db8e9815 100644 --- a/.idea/runConfigurations/ra6m1.xml +++ b/.idea/runConfigurations/ra6m1.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra6m5.xml b/.idea/runConfigurations/ra6m5.xml index 606e04e52..24e942fda 100644 --- a/.idea/runConfigurations/ra6m5.xml +++ b/.idea/runConfigurations/ra6m5.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1010.xml b/.idea/runConfigurations/rt1010.xml index f4f48181c..7929d56d8 100644 --- a/.idea/runConfigurations/rt1010.xml +++ b/.idea/runConfigurations/rt1010.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1060.xml b/.idea/runConfigurations/rt1060.xml index 3d740edeb..f26dc7373 100644 --- a/.idea/runConfigurations/rt1060.xml +++ b/.idea/runConfigurations/rt1060.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/samd21g18.xml b/.idea/runConfigurations/samd21g18.xml index 9a1e65563..a922da648 100644 --- a/.idea/runConfigurations/samd21g18.xml +++ b/.idea/runConfigurations/samd21g18.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/samd51j19.xml b/.idea/runConfigurations/samd51j19.xml index 74d0e3649..a11baa3fd 100644 --- a/.idea/runConfigurations/samd51j19.xml +++ b/.idea/runConfigurations/samd51j19.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/stlink.xml b/.idea/runConfigurations/stlink.xml index b29b63f1a..92d94a80e 100644 --- a/.idea/runConfigurations/stlink.xml +++ b/.idea/runConfigurations/stlink.xml @@ -1,6 +1,6 @@ - - + + diff --git a/.idea/runConfigurations/stm32g474.xml b/.idea/runConfigurations/stm32g474.xml index a7267fe90..ad6209bc0 100644 --- a/.idea/runConfigurations/stm32g474.xml +++ b/.idea/runConfigurations/stm32g474.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/stm32h743.xml b/.idea/runConfigurations/stm32h743.xml index 9cd142de0..1d0c0155d 100644 --- a/.idea/runConfigurations/stm32h743.xml +++ b/.idea/runConfigurations/stm32h743.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/uno_r4.xml b/.idea/runConfigurations/uno_r4.xml index 75eb3df4d..f3d1ccac6 100644 --- a/.idea/runConfigurations/uno_r4.xml +++ b/.idea/runConfigurations/uno_r4.xml @@ -1,5 +1,5 @@ - + From 83d6263adeaef23943c0eae888a460d6470a8af7 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 21:51:49 +0700 Subject: [PATCH 63/82] update freertos-kernel which remove compiler warning from freertos_kernel lib --- tools/get_deps.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/get_deps.py b/tools/get_deps.py index a0121f400..8edfaa0a7 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -7,7 +7,7 @@ from multiprocessing import Pool # path, url, commit, family (Alphabet sorted by path) deps_mandatory = { 'lib/FreeRTOS-Kernel': ['https://github.com/FreeRTOS/FreeRTOS-Kernel.git', - '5f19e34f878af97810a7662a75eac59bd74d628b', + 'dc09a3dd5144c4033607565c71b9919900f95cff', 'all'], 'lib/lwip': ['https://github.com/lwip-tcpip/lwip.git', '159e31b689577dbf69cf0683bbaffbd71fa5ee10', From fbf64b122d6d77a7aa1ec501ff29b8bddeec0a70 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 22:12:38 +0700 Subject: [PATCH 64/82] switch freertos to static allocation only (dynamic = 0), since it is possible now with latest freertos cmake --- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- 21 files changed, 42 insertions(+), 42 deletions(-) diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index 2bc5491bb..0248f0b47 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index 2a2bce261..e7bd4705a 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index 6f80413c0..b8b8268f7 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h index a48b54576..eb0da971f 100644 --- a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h index 6f80413c0..b8b8268f7 100644 --- a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h index fc0ab1f2d..e70debfc0 100644 --- a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index fc0ab1f2d..e70debfc0 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index fc0ab1f2d..e70debfc0 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index efd26a3a7..00f832b84 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index 4ef5dd883..cf643d6e5 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -88,8 +88,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h index 02e868741..d83c79601 100644 --- a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h index 32db4ad95..923627b70 100644 --- a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h index 33440d288..fa7092537 100644 --- a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h index 580fe02bb..2bc6b926b 100644 --- a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h index ed90261d0..dfe5fb6cf 100644 --- a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h index 4615640ed..3ad0e794e 100644 --- a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index 02bfaf97a..e15740e65 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index 17c2a0c5c..d38801732 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index 60aa739e2..bf7a80043 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h index c12b0dc85..9b2af0a22 100644 --- a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h index 138fc6ba6..1223274dc 100644 --- a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 From 2187ece844805434bfe61243fcf70014398acd43 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 18 Nov 2023 15:11:29 +0700 Subject: [PATCH 65/82] update freertos to fix build with IAR cm0 --- tools/get_deps.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/get_deps.py b/tools/get_deps.py index 8edfaa0a7..6850cacb1 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -7,7 +7,7 @@ from multiprocessing import Pool # path, url, commit, family (Alphabet sorted by path) deps_mandatory = { 'lib/FreeRTOS-Kernel': ['https://github.com/FreeRTOS/FreeRTOS-Kernel.git', - 'dc09a3dd5144c4033607565c71b9919900f95cff', + '4ff01a7a4a51f53b44496aefee1e3c0071b7b173', 'all'], 'lib/lwip': ['https://github.com/lwip-tcpip/lwip.git', '159e31b689577dbf69cf0683bbaffbd71fa5ee10', From b5b34e73d6cbce1a1d85999ef92712fb98a73a84 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 19 Nov 2023 16:10:16 +0100 Subject: [PATCH 66/82] Add dwc2 info of F429. --- src/portable/synopsys/dwc2/dwc2_info.md | 108 ++++++++++++------------ src/portable/synopsys/dwc2/dwc2_info.py | 2 + 2 files changed, 56 insertions(+), 54 deletions(-) diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 2d8ab067f..f298f6656 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,54 +1,54 @@ -| | BCM2711 (Pi4) | EFM32GG FullSpeed | ESP32-S2 | STM32F407 Fullspeed | STM32F407 Highspeed | STM32F411 Fullspeed | STM32F412 Fullspeed | STM32F723 Fullspeed | STM32F723 HighSpeed | STM32F767 Fullspeed | STM32H743 Highspeed | STM32L476 Fullspeed | STM32U5A5 Highspeed | GD32VF103 Fullspeed | XMC4500 | -|:----------------------------|:----------------|:--------------------|:-----------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:-----------| -| guid | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00001200 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002000 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| gsnpsid | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| ghwcfg1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| ghwcfg2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x229DCD20 | 0x229ED590 | 0x229DCD20 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229ED520 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | -| - arch | 2 | 2 | 2 | 0 | 2 | 0 | 0 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | -| - point2point | 0 | 0 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | -| - hs_phy_type | 1 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 3 | 0 | 2 | 0 | 1 | 0 | 0 | -| - fs_phy_type | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - num_dev_ep | 7 | 6 | 6 | 3 | 5 | 3 | 5 | 5 | 8 | 5 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 7 | 11 | 7 | 11 | 11 | 15 | 11 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_cpu_int | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nperiod_tx_q_depth | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - host_period_tx_q_depth | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - dev_token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| ghwcfg3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x020001E8 | 0x03F403E8 | 0x020001E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x0200D1E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - total_fifo_size | 4080 | 498 | 200 | 512 | 1012 | 512 | 512 | 512 | 1006 | 512 | 952 | 512 | 952 | 0 | 634 | -| ghwcfg4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0x0FF08030 | 0x17F00030 | 0x0FF08030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x17F08030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - power_optimized | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | 0 | 0 | -| - service_interval_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_en | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - reserved13 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - utmi_phy_data_width | 0 | 2 | 2 | 2 | 0 | 2 | 2 | 2 | 0 | 2 | 0 | 2 | 0 | 0 | 2 | -| - dev_ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - num_dev_in_eps | 15 | 13 | 9 | 7 | 11 | 7 | 11 | 11 | 1 | 11 | 1 | 11 | 1 | 0 | 13 | -| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | -| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG FullSpeed | ESP32-S2 | STM32F407 Fullspeed | STM32F407 Highspeed | STM32F411 Fullspeed | STM32F412 Fullspeed | STM32F429 Fullspeed | STM32F429 Highspeed | STM32F723 Fullspeed | STM32F723 HighSpeed | STM32F767 Fullspeed | STM32H743 Highspeed | STM32L476 Fullspeed | STM32U5A5 Highspeed | GD32VF103 Fullspeed | XMC4500 | +|:----------------------------|:----------------|:--------------------|:-----------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:-----------| +| guid | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00001200 | 0x00002000 | 0x00001200 | 0x00001100 | 0x00003000 | 0x00003100 | 0x00002000 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | +| gsnpsid | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54281A | 0x4F54281A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | +| ghwcfg1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| ghwcfg2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x229DCD20 | 0x229ED590 | 0x229DCD20 | 0x229ED520 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229FE1D0 | 0x229ED520 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | +| - op_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | +| - arch | 2 | 2 | 2 | 0 | 2 | 0 | 0 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | +| - point2point | 0 | 0 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | +| - hs_phy_type | 1 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 2 | 0 | 3 | 0 | 2 | 0 | 1 | 0 | 0 | +| - fs_phy_type | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - num_dev_ep | 7 | 6 | 6 | 3 | 5 | 3 | 5 | 3 | 5 | 5 | 8 | 5 | 8 | 5 | 8 | 0 | 6 | +| - num_host_ch | 7 | 13 | 7 | 7 | 11 | 7 | 11 | 7 | 11 | 11 | 15 | 11 | 15 | 11 | 15 | 0 | 13 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - mul_cpu_int | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nperiod_tx_q_depth | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - host_period_tx_q_depth | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - dev_token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| ghwcfg3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x020001E8 | 0x03F403E8 | 0x020001E8 | 0x0200D1E8 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x03EED2E8 | 0x0200D1E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | +| - xfer_size_width | 8 | 8 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | +| - packet_size_width | 6 | 6 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - i2c_enable | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - total_fifo_size | 4080 | 498 | 200 | 512 | 1012 | 512 | 512 | 512 | 1012 | 512 | 1006 | 512 | 952 | 512 | 952 | 0 | 634 | +| ghwcfg4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0x0FF08030 | 0x17F00030 | 0x0FF08030 | 0x17F08030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x23F00030 | 0x17F08030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - power_optimized | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | 0 | 0 | +| - service_interval_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_en | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - reserved13 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - utmi_phy_data_width | 0 | 2 | 2 | 2 | 0 | 2 | 2 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 0 | 2 | +| - dev_ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - vbus_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - a_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - b_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - num_dev_in_eps | 15 | 13 | 9 | 7 | 11 | 7 | 11 | 7 | 11 | 11 | 1 | 11 | 1 | 11 | 1 | 0 | 13 | +| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | \ No newline at end of file diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 0af6c4c77..4bcdb4fe5 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -12,6 +12,8 @@ dwc2_reg_value = { 'STM32F407 Highspeed': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], 'STM32F411 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], 'STM32F412 Fullspeed': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32F429 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], + 'STM32F429 Highspeed': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], 'STM32F723 Fullspeed': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], 'STM32F723 HighSpeed': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x3EED2E8, 0x23F00030], 'STM32F767 Fullspeed': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], From 8af470e06d032d1b9731d817741318883c0b8fa0 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 19 Nov 2023 16:19:11 +0100 Subject: [PATCH 67/82] Fix CI --- src/portable/synopsys/dwc2/dwc2_info.md | 2 +- src/portable/synopsys/dwc2/dwc2_info.py | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index f298f6656..d093502b0 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -51,4 +51,4 @@ | - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | | - num_dev_in_eps | 15 | 13 | 9 | 7 | 11 | 7 | 11 | 7 | 11 | 11 | 1 | 11 | 1 | 11 | 1 | 0 | 13 | | - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | -| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | \ No newline at end of file +| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 4bcdb4fe5..03c095655 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -154,6 +154,7 @@ def render_md(): # Write the Markdown table to a file with open('dwc2_info.md', 'w') as md_file: md_file.write(df.to_markdown()) + md_file.write('\n') if __name__ == '__main__': From 1f71625a32a77d5fe243f71f9e8be03c9bbc41d1 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 Nov 2023 21:31:06 +0700 Subject: [PATCH 68/82] add tuh_max3421_reg_read(), tuh_max3421_reg_read() for application usage added max3241 for feather m4 and tested --- .../samd51/boards/feather_m4_express/board.h | 17 ++++ hw/bsp/samd51/family.c | 28 +++++-- src/portable/analog/max3421/hcd_max3421.c | 78 +++++++++++-------- 3 files changed, 86 insertions(+), 37 deletions(-) diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.h b/hw/bsp/samd51/boards/feather_m4_express/board.h index 4629643fd..474163c06 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.h +++ b/hw/bsp/samd51/boards/feather_m4_express/board.h @@ -31,6 +31,8 @@ extern "C" { #endif +#define _PINNUM(port, pin) ((port)*32 + (pin)) + // LED #define LED_PIN 23 #define LED_STATE_ON 1 @@ -43,6 +45,21 @@ #define UART_TX_PIN (32 + 17) #define UART_RX_PIN (32 + 16) +// SPI for USB host shield +#define MAX3421_SERCOM_ID 1 // SERCOM2 +#define MAX3421_SERCOM_FUNCTION 2 // function C + +#define MAX3421_SCK_PIN _PINNUM(0, 17) +#define MAX3421_MOSI_PIN _PINNUM(1, 23) +#define MAX3421_MISO_PIN _PINNUM(1, 22) +#define MAX3421_TX_PAD 2 // MOSI = PAD_3, SCK = PAD_1 +#define MAX3421_RX_PAD 2 // MISO = PAD_2 + +#define MAX3421_CS_PIN 21 // D11 + +#define MAX3421_INTR_PIN 20 // D10 +#define MAX3421_INTR_EIC_ID 4 // EIC4 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index bca18e1a2..2a2aee982 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -76,12 +76,18 @@ void USB_3_Handler(void) { // Implementation //--------------------------------------------------------------------+ -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + +// API to read MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); + +// API to write MAX3421's register. Implemented by TinyUSB +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); + #define MAX3421_SERCOM TU_XSTRCAT(SERCOM, MAX3421_SERCOM_ID) #define MAX3421_EIC_Handler TU_XSTRCAT3(EIC_, MAX3421_INTR_EIC_ID, _Handler) static void max3421_init(void); - #endif void board_init(void) { @@ -136,11 +142,23 @@ void board_init(void) { gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif } +void board_init_after_tusb(void) { +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { + IOPINS1_ADDR = 20u << 3, // 0xA0 + }; + + uint8_t rhport = 1; + tuh_max3421_reg_write(rhport, IOPINS1_ADDR, 0x01, false); +#endif +} + //--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ @@ -182,7 +200,7 @@ uint32_t board_millis(void) { //--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E, must be implemented by application //--------------------------------------------------------------------+ -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 static void max3421_init(void) { //------------- SPI Init -------------// @@ -262,7 +280,7 @@ static void max3421_init(void) { // Enable the SPI module sercom->SPI.CTRLA.bit.ENABLE = 1; - while (sercom->SPI.SYNCBUSY.bit.ENABLE); + while (sercom->SPI.SYNCBUSY.bit.ENABLE) {} //------------- External Interrupt -------------// diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 65f87f7c6..2abd74d51 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -54,6 +54,12 @@ enum { CPUCTL_ADDR = 16u << 3, // 0x80 PINCTL_ADDR = 17u << 3, // 0x88 REVISION_ADDR = 18u << 3, // 0x90 + // 19 is not used + IOPINS1_ADDR = 20u << 3, // 0xA0 + IOPINS2_ADDR = 21u << 3, // 0xA8 + GPINIRQ_ADDR = 22u << 3, // 0xB0 + GPINIEN_ADDR = 23u << 3, // 0xB8 + GPINPOL_ADDR = 24u << 3, // 0xC0 HIRQ_ADDR = 25u << 3, // 0xC8 HIEN_ADDR = 26u << 3, // 0xD0 MODE_ADDR = 27u << 3, // 0xD8 @@ -207,7 +213,9 @@ typedef struct { static max3421_data_t _hcd_data; //--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E, must be implemented by application +// API: SPI transfer with MAX3421E +// - spi_cs_api(), spi_xfer_api(), int_api(): must be implemented by application +// - reg_read(), reg_write(): is implemented by this driver, can be used by application //--------------------------------------------------------------------+ // API to control MAX3421 SPI CS @@ -220,11 +228,18 @@ extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint // API to enable/disable MAX3421 INTR pin interrupt extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); +// API to read MAX3421's register. Implemented by TinyUSB +uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); + +// API to write MAX3421's register. Implemented by TinyUSB +bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); + //--------------------------------------------------------------------+ -// SPI Helper +// SPI Commands and Helper //--------------------------------------------------------------------+ -static void handle_connect_irq(uint8_t rhport, bool in_isr); -static inline void hirq_write(uint8_t rhport, uint8_t data, bool in_isr); + +#define reg_read tuh_max3421_reg_read +#define reg_write tuh_max3421_reg_write static void max3421_spi_lock(uint8_t rhport, bool in_isr) { // disable interrupt and mutex lock (for pre-emptive RTOS) if not in_isr @@ -248,6 +263,32 @@ static void max3421_spi_unlock(uint8_t rhport, bool in_isr) { } } +uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr) { + uint8_t tx_buf[2] = {reg, 0}; + uint8_t rx_buf[2] = {0, 0}; + + max3421_spi_lock(rhport, in_isr); + bool ret = tuh_max3421_spi_xfer_api(rhport, tx_buf, rx_buf, 2); + max3421_spi_unlock(rhport, in_isr); + + _hcd_data.hirq = rx_buf[0]; + return ret ? rx_buf[1] : 0; +} + +bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr) { + uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data}; + uint8_t rx_buf[2] = {0, 0}; + + max3421_spi_lock(rhport, in_isr); + bool ret = tuh_max3421_spi_xfer_api(rhport, tx_buf, rx_buf, 2); + max3421_spi_unlock(rhport, in_isr); + + // HIRQ register since we are in full-duplex mode + _hcd_data.hirq = rx_buf[0]; + + return ret; +} + static void fifo_write(uint8_t rhport, uint8_t reg, uint8_t const * buffer, uint16_t len, bool in_isr) { uint8_t hirq; reg |= CMDBYTE_WRITE; @@ -275,34 +316,7 @@ static void fifo_read(uint8_t rhport, uint8_t * buffer, uint16_t len, bool in_is max3421_spi_unlock(rhport, in_isr); } -static void reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr) { - uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data}; - uint8_t rx_buf[2] = {0, 0}; - - max3421_spi_lock(rhport, in_isr); - - tuh_max3421_spi_xfer_api(rhport, tx_buf, rx_buf, 2); - - max3421_spi_unlock(rhport, in_isr); - - // HIRQ register since we are in full-duplex mode - _hcd_data.hirq = rx_buf[0]; -} - -static uint8_t reg_read(uint8_t rhport, uint8_t reg, bool in_isr) { - uint8_t tx_buf[2] = {reg, 0}; - uint8_t rx_buf[2] = {0, 0}; - - max3421_spi_lock(rhport, in_isr); - - bool ret = tuh_max3421_spi_xfer_api(rhport, tx_buf, rx_buf, 2); - - max3421_spi_unlock(rhport, in_isr); - - _hcd_data.hirq = rx_buf[0]; - return ret ? rx_buf[1] : 0; -} - +//------------- register write helper -------------// static inline void hirq_write(uint8_t rhport, uint8_t data, bool in_isr) { reg_write(rhport, HIRQ_ADDR, data, in_isr); // HIRQ write 1 is clear From 86f6588c3f5d682ca6d94064b5817a8a463fd23b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 Nov 2023 22:09:38 +0700 Subject: [PATCH 69/82] update example to work with featherwing max3421, set max3421 GPIO0 for vbus tested with feather nrf52840, m0, m4 --- .idea/cmake.xml | 2 ++ examples/host/cdc_msc_hid/src/main.c | 30 +++++++++++-------- examples/host/cdc_msc_hid_freertos/src/main.c | 12 ++++++++ .../boards/feather_nrf52840_express/board.h | 4 +-- hw/bsp/nrf/family.c | 2 -- .../samd21/boards/feather_m0_express/board.h | 15 ++++++++++ hw/bsp/samd51/family.c | 15 ---------- 7 files changed, 49 insertions(+), 31 deletions(-) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 311c3ccb9..97e503033 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -40,7 +40,9 @@ + + diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 405bf8c06..a3b80e030 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -34,13 +34,17 @@ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); - extern void cdc_app_task(void); extern void hid_app_task(void); +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +// API to read/rite MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); +#endif + /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host CDC MSC HID Example\r\n"); @@ -52,8 +56,13 @@ int main(void) board_init_after_tusb(); } - while (1) - { +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { IOPINS1_ADDR = 20u << 3, /* 0xA0 */ }; + tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false); +#endif + + while (1) { // tinyusb host task tuh_task(); @@ -67,14 +76,12 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { // application set-up printf("A device with address %d is mounted\r\n", dev_addr); } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { // application tear-down printf("A device with address %d is unmounted \r\n", dev_addr); } @@ -83,15 +90,14 @@ void tuh_umount_cb(uint8_t dev_addr) //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 691ff3e29..069cbdc90 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -83,6 +83,12 @@ extern void cdc_app_init(void); extern void hid_app_init(void); extern void msc_app_init(void); +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +// API to read/rite MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); +#endif + /*------------- MAIN -------------*/ int main(void) { board_init(); @@ -126,6 +132,12 @@ static void usb_host_task(void *param) { board_init_after_tusb(); } +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { IOPINS1_ADDR = 20u << 3, /* 0xA0 */ }; + tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false); +#endif + cdc_app_init(); hid_app_init(); msc_app_init(); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3d59516d8..22946422b 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -49,8 +49,8 @@ #define MAX3421_SCK_PIN 14 #define MAX3421_MOSI_PIN 13 #define MAX3421_MISO_PIN 15 -#define MAX3421_CS_PIN 27 // D10 -#define MAX3421_INTR_PIN 26 // D9 +#define MAX3421_CS_PIN 6 // D11 +#define MAX3421_INTR_PIN 27 // D10 #ifdef __cplusplus } diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index c431389f3..6e0cd85c3 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -95,9 +95,7 @@ TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { //------------- Host using MAX2341E -------------// #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 - static void max3421_init(void); - static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); #endif diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index 8e0caa6bd..fd3d16aaa 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -43,6 +43,21 @@ #define UART_RX_PIN 4 #define UART_TX_PIN 5 +// SPI for USB host shield +#define MAX3421_SERCOM_ID 4 // SERCOM4 +#define MAX3421_SERCOM_FUNCTION 3 // function D (Sercom Alt) + +#define MAX3421_SCK_PIN (32+11) +#define MAX3421_MOSI_PIN (32+10) +#define MAX3421_MISO_PIN 12 +#define MAX3421_TX_PAD 1 // MOSI = PAD_2, SCK = PAD_3 +#define MAX3421_RX_PAD 0 // MISO = PAD_2 + +#define MAX3421_CS_PIN 16 // D11 + +#define MAX3421_INTR_PIN 18 // D10 +#define MAX3421_INTR_EIC_ID 2 // EIC2 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 2a2aee982..009a0d290 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -78,12 +78,6 @@ void USB_3_Handler(void) { #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 -// API to read MAX3421's register. Implemented by TinyUSB -extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); - -// API to write MAX3421's register. Implemented by TinyUSB -extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); - #define MAX3421_SERCOM TU_XSTRCAT(SERCOM, MAX3421_SERCOM_ID) #define MAX3421_EIC_Handler TU_XSTRCAT3(EIC_, MAX3421_INTR_EIC_ID, _Handler) @@ -148,15 +142,6 @@ void board_init(void) { } void board_init_after_tusb(void) { -#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 - // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable - enum { - IOPINS1_ADDR = 20u << 3, // 0xA0 - }; - - uint8_t rhport = 1; - tuh_max3421_reg_write(rhport, IOPINS1_ADDR, 0x01, false); -#endif } //--------------------------------------------------------------------+ From aedc92f2d31af6209b00e8a5d7abbfec02ed979b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 11:25:55 +0700 Subject: [PATCH 70/82] fix typo in cdc line coding enum --- examples/host/cdc_msc_hid/src/tusb_config.h | 2 +- .../cdc_msc_hid_freertos/src/tusb_config.h | 2 +- src/class/cdc/cdc.h | 20 ++++++++++--------- src/class/cdc/cdc_host.h | 2 +- 4 files changed, 14 insertions(+), 12 deletions(-) diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index c8e9138e3..a53000a11 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -118,7 +118,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } #ifdef __cplusplus diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 1bed9a9b3..ba23301ed 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -123,7 +123,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } #ifdef __cplusplus diff --git a/src/class/cdc/cdc.h b/src/class/cdc/cdc.h index 4658e43af..deec32ae4 100644 --- a/src/class/cdc/cdc.h +++ b/src/class/cdc/cdc.h @@ -182,21 +182,23 @@ typedef enum CDC_REQUEST_MDLM_SEMANTIC_MODEL = 0x60, }cdc_management_request_t; -enum -{ +enum { CDC_CONTROL_LINE_STATE_DTR = 0x01, CDC_CONTROL_LINE_STATE_RTS = 0x02, }; -enum -{ - CDC_LINE_CONDING_STOP_BITS_1 = 0, // 1 bit - CDC_LINE_CONDING_STOP_BITS_1_5 = 1, // 1.5 bits - CDC_LINE_CONDING_STOP_BITS_2 = 2, // 2 bits +enum { + CDC_LINE_CODING_STOP_BITS_1 = 0, // 1 bit + CDC_LINE_CODING_STOP_BITS_1_5 = 1, // 1.5 bits + CDC_LINE_CODING_STOP_BITS_2 = 2, // 2 bits }; -enum -{ +// TODO Backward compatible for typos. Maybe removed in the future release +#define CDC_LINE_CONDING_STOP_BITS_1 CDC_LINE_CODING_STOP_BITS_1 +#define CDC_LINE_CONDING_STOP_BITS_1_5 CDC_LINE_CODING_STOP_BITS_1_5 +#define CDC_LINE_CONDING_STOP_BITS_2 CDC_LINE_CODING_STOP_BITS_2 + +enum { CDC_LINE_CODING_PARITY_NONE = 0, CDC_LINE_CODING_PARITY_ODD = 1, CDC_LINE_CODING_PARITY_EVEN = 2, diff --git a/src/class/cdc/cdc_host.h b/src/class/cdc/cdc_host.h index 19552f1ee..9e5edd94e 100644 --- a/src/class/cdc/cdc_host.h +++ b/src/class/cdc/cdc_host.h @@ -44,7 +44,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t //#ifndef CFG_TUH_CDC_LINE_CODING_ON_ENUM -//#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +//#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } //#endif // RX FIFO size From 89dce6882fd7617bc379dd9cb9c5c045880c7ef6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 16:11:39 +0700 Subject: [PATCH 71/82] minor update board.h --- hw/bsp/imxrt/boards/metro_m7_1011/board.h | 11 ++++------- hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h | 11 ++++------- hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 9 ++++----- hw/bsp/imxrt/boards/mimxrt1015_evk/board.h | 9 ++++----- hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 9 ++++----- hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 9 ++++----- hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 9 ++++----- hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 9 ++++----- hw/bsp/imxrt/boards/mimxrt1064_evk/board.h | 9 ++++----- hw/bsp/imxrt/boards/teensy_40/board.h | 2 +- hw/bsp/imxrt/boards/teensy_41/board.h | 2 +- 11 files changed, 38 insertions(+), 51 deletions(-) diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 1f741e1d7..24141f5f4 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -24,13 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_M7_1011_H_ +#define BOARD_M7_1011_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (8*1024*1024) // LED: IOMUXC_GPIO_03_GPIOMUX_IO03 @@ -47,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h index 1f741e1d7..343e17f81 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h @@ -24,13 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_METRO_M7_1011_SD_H_ +#define BOARD_METRO_M7_1011_SD_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (8*1024*1024) // LED: IOMUXC_GPIO_03_GPIOMUX_IO03 @@ -47,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index c0c9f69a5..da12075a0 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1010_EVK_H_ +#define BOARD_MIMXRT1010_EVK_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x1000000U) // LED: IOMUXC_GPIO_11_GPIOMUX_IO11 @@ -45,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 2d7e2dc26..6ac78453f 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1015_EVK_H_ +#define BOARD_MIMXRT1015_EVK_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x1000000U) // LED @@ -49,4 +48,4 @@ #define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX #define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 781c61bf3..4f4593524 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1020_EVK_H_ +#define BOARD_MIMXRT1020_EVK_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x800000U) // LED: IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 @@ -45,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index df9fa87c5..27a64b464 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1024_EVK_H_ +#define BOARD_MIMXRT1024_EVK_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size // RT1020-EVK #define BOARD_FLASH_SIZE (0x800000U) #define BOARD_FLASH_SIZE (0x400000U) // builtin flash of RT1024 @@ -46,4 +45,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 7c333d8f5..97d1e446c 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1050_EVKB_H_ +#define BOARD_MIMXRT1050_EVKB_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x4000000U) // LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 @@ -45,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 8b7dba80a..40b99860f 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1060_EVKB_H_ +#define BOARD_MIMXRT1060_EVKB_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x800000U) // LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 @@ -45,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index fa45b9071..7fca5adef 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1064_EVKB_H_ +#define BOARD_MIMXRT1064_EVKB_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x400000U) // LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 @@ -45,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index 0804721b5..4a173c834 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -29,7 +29,7 @@ #define BOARD_H_ -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (2 * 1024 * 1024) // LED D13: IOMUXC_GPIO_B0_03_GPIO2_IO03 diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index 2ffb25497..358684126 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -29,7 +29,7 @@ #define BOARD_H_ -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (8 * 1024 * 1024) // LED D13: IOMUXC_GPIO_B0_03_GPIO2_IO03 From 6a908ccfb6737fb8ac2cd30c81141c3a1125a21f Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 16:38:24 +0700 Subject: [PATCH 72/82] correctly use xtal for initialize usbphy, rt1170 usb is working --- .../boards/metro_m7_1011/board/clock_config.c | 4 +- .../boards/metro_m7_1011/board/clock_config.h | 60 ++-- .../boards/metro_m7_1011/board/pin_mux.c | 4 +- .../boards/metro_m7_1011/metro_m7_1011.mex | 11 +- hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h | 9 +- .../mimxrt1170_evkb/board/clock_config.c | 10 +- .../mimxrt1170_evkb/board/clock_config.h | 276 +++++++++--------- .../boards/mimxrt1170_evkb/board/pin_mux.c | 4 +- .../mimxrt1170_evkb/mimxrt1170_evkb.mex | 16 +- hw/bsp/imxrt/family.c | 42 ++- 10 files changed, 223 insertions(+), 213 deletions(-) diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c index 1b28b668a..d5c93222c 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c @@ -15,11 +15,11 @@ /* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo -product: Clocks v11.0 +product: Clocks v12.0 processor: MIMXRT1011xxxxx package_id: MIMXRT1011DAE5A mcu_data: ksdk2_0 -processor_version: 13.0.2 +processor_version: 14.0.0 board: MIMXRT1010-EVK * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h index 119fd94bd..cc627cf6a 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h @@ -36,36 +36,36 @@ void BOARD_InitBootClocks(void); #define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ /* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL -#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL -#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL -#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL -#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL -#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL -#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL -#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL -#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL -#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL -#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL -#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL -#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL -#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL -#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL -#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL -#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL -#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL -#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL -#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL -#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL -#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL -#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL -#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL -#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL -#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL -#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL -#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL /* Clock consumers of ADC_ALT_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL /* Clock consumers of CKIL_SYNC_CLK_ROOT output : CSU, EWM, GPT1, GPT2, KPP, PIT, RTWDOG, SNVS, SPDIF, TEMPMON, USB, WDOG1, WDOG2 */ +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL /* Clock consumers of CLKO1_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL /* Clock consumers of CLKO2_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL /* Clock consumers of CLK_1M output : EWM, RTWDOG */ +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL /* Clock consumers of CLK_24M output : GPT1, GPT2 */ +#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL /* Clock consumers of CORE_CLK_ROOT output : ARM, FLEXSPI */ +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL /* Clock consumers of ENET_500M_REF_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL /* Clock consumers of FLEXIO1_CLK_ROOT output : FLEXIO1 */ +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL /* Clock consumers of FLEXSPI_CLK_ROOT output : FLEXSPI */ +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL /* Clock consumers of GPT1_ipg_clk_highfreq output : GPT1 */ +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL /* Clock consumers of GPT2_ipg_clk_highfreq output : GPT2 */ +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL /* Clock consumers of IPG_CLK_ROOT output : ADC1, ADC_ETC, AIPSTZ1, AIPSTZ2, AOI, ARM, CCM, CSU, DCDC, DCP, DMA0, DMAMUX, EWM, FLEXIO1, FLEXRAM, FLEXSPI, GPC, GPIO1, GPIO2, GPIO5, IOMUXC, KPP, LPI2C1, LPI2C2, LPSPI1, LPSPI2, LPUART1, LPUART2, LPUART3, LPUART4, OCOTP, PWM1, RTWDOG, SAI1, SAI3, SNVS, SPDIF, SRC, TEMPMON, TRNG, USB, WDOG1, WDOG2, XBARA */ +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL /* Clock consumers of LPI2C_CLK_ROOT output : LPI2C1, LPI2C2 */ +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL /* Clock consumers of LPSPI_CLK_ROOT output : LPSPI1, LPSPI2 */ +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL /* Clock consumers of MQS_MCLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL /* Clock consumers of PERCLK_CLK_ROOT output : GPT1, GPT2, PIT */ +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL /* Clock consumers of SAI1_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL /* Clock consumers of SAI1_MCLK1 output : SAI1 */ +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL /* Clock consumers of SAI1_MCLK2 output : SAI1 */ +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL /* Clock consumers of SAI1_MCLK3 output : SAI1 */ +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL /* Clock consumers of SAI3_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL /* Clock consumers of SAI3_MCLK1 output : SAI3 */ +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL /* Clock consumers of SAI3_MCLK2 output : SAI3 */ +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL /* Clock consumers of SAI3_MCLK3 output : SAI3 */ +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL /* Clock consumers of SPDIF0_CLK_ROOT output : SPDIF */ +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL /* Clock consumers of SPDIF0_EXTCLK_OUT output : SPDIF */ +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL /* Clock consumers of TRACE_CLK_ROOT output : ARM */ +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL /* Clock consumers of UART_CLK_ROOT output : LPUART1, LPUART2, LPUART3, LPUART4 */ +#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 480000000UL /* Clock consumers of USBPHY_CLK output : TEMPMON, USB */ /*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c index 6216d99c8..2d869b56e 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c @@ -6,11 +6,11 @@ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo -product: Pins v13.1 +product: Pins v14.0 processor: MIMXRT1011xxxxx package_id: MIMXRT1011DAE5A mcu_data: ksdk2_0 -processor_version: 13.0.2 +processor_version: 14.0.0 board: MIMXRT1010-EVK external_user_signals: {} pin_labels: diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex index de0a2f75d..ef551731a 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex @@ -1,5 +1,5 @@ - + MIMXRT1011xxxxx MIMXRT1011DAE5A @@ -19,19 +19,20 @@ false - + - 13.0.2 + 14.0.0 + @@ -93,13 +94,13 @@ - + - 13.0.2 + 14.0.0 diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h index 0b6b462e7..303935517 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h @@ -24,11 +24,10 @@ * This file is part of the TinyUSB stack. */ +#ifndef BOARD_MIMXRT1170_EVKB_H_ +#define BOARD_MIMXRT1170_EVKB_H_ -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size +// required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (0x1000000U) // LED: IOMUXC_GPIO_AD_04_GPIO9_IO03 @@ -45,4 +44,4 @@ #define UART_PORT LPUART1 #define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT -#endif /* BOARD_H_ */ +#endif diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c index b9953a456..88b3b3770 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c @@ -11,11 +11,11 @@ /* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo -product: Clocks v11.0 +product: Clocks v12.0 processor: MIMXRT1176xxxxx package_id: MIMXRT1176DVMAA mcu_data: ksdk2_0 -processor_version: 13.0.2 +processor_version: 14.0.1 board: MIMXRT1170-EVKB * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ @@ -275,6 +275,7 @@ void BOARD_BootClockRUN(void) { clock_root_config_t rootCfg = {0}; +#if !defined(SKIP_DCDC_CONFIGURATION) || (!SKIP_DCDC_CONFIGURATION) /* Set DCDC to DCM mode to improve the efficiency for light loading in run mode and transient performance with a big loading step. */ DCDC_BootIntoDCM(DCDC); @@ -288,7 +289,8 @@ void BOARD_BootClockRUN(void) /* Set 1.125V for production samples to align with data sheet requirement */ DCDC_SetVDD1P0BuckModeTargetVoltage(DCDC, kDCDC_1P0BuckTarget1P125V); } -#endif +#endif /* SKIP_DCDC_ADJUSTMENT */ +#endif /* SKIP_DCDC_CONFIGURATION */ #if !defined(SKIP_FBB_ENABLE) || (!SKIP_FBB_ENABLE) /* Check if FBB need to be enabled in OverDrive(OD) mode */ @@ -333,7 +335,7 @@ void BOARD_BootClockRUN(void) /* Init OSC RC 400M */ CLOCK_OSC_EnableOscRc400M(); - CLOCK_OSC_GateOscRc400M(true); + CLOCK_OSC_GateOscRc400M(false); /* Init OSC RC 48M */ CLOCK_OSC_EnableOsc48M(true); diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h index 82d2cf83c..4a4d35eaa 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h @@ -42,144 +42,144 @@ void BOARD_InitBootClocks(void); #endif /* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKRUN_ACMP_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ADC1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ADC2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ARM_PLL_CLK 996000000UL -#define BOARD_BOOTCLOCKRUN_ASRC_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_AXI_CLK_ROOT 996000000UL -#define BOARD_BOOTCLOCKRUN_BUS_CLK_ROOT 240000000UL -#define BOARD_BOOTCLOCKRUN_BUS_LPSR_CLK_ROOT 160000000UL -#define BOARD_BOOTCLOCKRUN_CAN1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CAN2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CAN3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CCM_CLKO1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CCM_CLKO2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL -#define BOARD_BOOTCLOCKRUN_CSI2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CSI2_ESC_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CSI2_UI_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CSSYS_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_CSTRACE_CLK_ROOT 132000000UL -#define BOARD_BOOTCLOCKRUN_ELCDIF_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_EMV1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_EMV2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_1G_REF_CLK 0UL -#define BOARD_BOOTCLOCKRUN_ENET_1G_TX_CLK 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_25M_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_QOS_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_QOS_REF_CLK 0UL -#define BOARD_BOOTCLOCKRUN_ENET_QOS_TX_CLK 0UL -#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL -#define BOARD_BOOTCLOCKRUN_ENET_TIMER1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_TIMER2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_TIMER3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL -#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_FLEXSPI1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GC355_CLK_ROOT 492000012UL -#define BOARD_BOOTCLOCKRUN_GPT1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT3_IPG_CLK_HIGHFREQ 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT4_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT4_IPG_CLK_HIGHFREQ 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT5_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT5_IPG_CLK_HIGHFREQ 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT6_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_GPT6_IPG_CLK_HIGHFREQ 24000000UL -#define BOARD_BOOTCLOCKRUN_LCDIFV2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C4_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C5_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPI2C6_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI4_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI5_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPSPI6_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART11_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART12_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART4_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART5_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART6_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART7_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART8_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_LPUART9_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_M4_CLK_ROOT 392727272UL -#define BOARD_BOOTCLOCKRUN_M4_SYSTICK_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_M7_CLK_ROOT 996000000UL -#define BOARD_BOOTCLOCKRUN_M7_SYSTICK_CLK_ROOT 100000UL -#define BOARD_BOOTCLOCKRUN_MIC_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_MIPI_DSI_TX_CLK_ESC_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_MIPI_ESC_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_MIPI_REF_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_MQS_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_MQS_MCLK 24000000UL -#define BOARD_BOOTCLOCKRUN_OSC_24M 24000000UL -#define BOARD_BOOTCLOCKRUN_OSC_32K 32768UL -#define BOARD_BOOTCLOCKRUN_OSC_RC_16M 16000000UL -#define BOARD_BOOTCLOCKRUN_OSC_RC_400M 400000000UL -#define BOARD_BOOTCLOCKRUN_OSC_RC_48M 48000000UL -#define BOARD_BOOTCLOCKRUN_OSC_RC_48M_DIV2 24000000UL -#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_CLK 0UL -#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_MODULATION 0UL -#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_RANGE 0UL -#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_CLK 984000025UL -#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_MODULATION 0UL -#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_RANGE 0UL -#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 0UL -#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL -#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL -#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI4_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI4_MCLK1 24000000UL -#define BOARD_BOOTCLOCKRUN_SAI4_MCLK2 0UL -#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 198000000UL -#define BOARD_BOOTCLOCKRUN_SPDIF_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_SPDIF_EXTCLK_OUT 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL1_CLK 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV2_CLK 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV5_CLK 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_MODULATION 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_RANGE 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_CLK 528000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD0_CLK 352000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD1_CLK 594000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD2_CLK 396000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD3_CLK 297000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_MODULATION 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_RANGE 0UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL3_CLK 480000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL3_DIV2_CLK 240000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD0_CLK 664615384UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD1_CLK 508235294UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD2_CLK 270000000UL -#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD3_CLK 392727272UL -#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 24000000UL -#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 24000000UL +#define BOARD_BOOTCLOCKRUN_ACMP_CLK_ROOT 24000000UL /* Clock consumers of ACMP_CLK_ROOT output : CMP1, CMP2, CMP3, CMP4 */ +#define BOARD_BOOTCLOCKRUN_ADC1_CLK_ROOT 24000000UL /* Clock consumers of ADC1_CLK_ROOT output : LPADC1 */ +#define BOARD_BOOTCLOCKRUN_ADC2_CLK_ROOT 24000000UL /* Clock consumers of ADC2_CLK_ROOT output : LPADC2 */ +#define BOARD_BOOTCLOCKRUN_ARM_PLL_CLK 996000000UL /* Clock consumers of ARM_PLL_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_ASRC_CLK_ROOT 24000000UL /* Clock consumers of ASRC_CLK_ROOT output : ASRC */ +#define BOARD_BOOTCLOCKRUN_AXI_CLK_ROOT 996000000UL /* Clock consumers of AXI_CLK_ROOT output : FLEXRAM */ +#define BOARD_BOOTCLOCKRUN_BUS_CLK_ROOT 240000000UL /* Clock consumers of BUS_CLK_ROOT output : ADC_ETC, AOI1, AOI2, CAAM, CAN1, CAN2, CM7_GPIO2, CM7_GPIO3, CMP1, CMP2, CMP3, CMP4, CSI, DAC, DMA0, DMAMUX0, DSI_HOST, EMVSIM1, EMVSIM2, ENC1, ENC2, ENC3, ENC4, ENET, ENET_1G, ENET_QOS, EWM, FLEXIO1, FLEXIO2, FLEXSPI1, FLEXSPI2, GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO6, IEE_APC, IOMUXC, IOMUXC_GPR, KPP, LCDIF, LCDIFV2, LPADC1, LPADC2, LPI2C1, LPI2C2, LPI2C3, LPI2C4, LPSPI1, LPSPI2, LPSPI3, LPSPI4, LPUART1, LPUART10, LPUART2, LPUART3, LPUART4, LPUART5, LPUART6, LPUART7, LPUART8, LPUART9, MECC1, MECC2, MIPI_CSI2RX, PIT1, PWM1, PWM2, PWM3, PWM4, PXP, RTWDOG3, SAI1, SAI2, SAI3, SPDIF, TMR1, TMR2, TMR3, TMR4, USBPHY1, USBPHY2, USB_OTG1, USB_OTG2, USDHC1, USDHC2, WDOG1, WDOG2, XBARA1, XBARB2, XBARB3, XECC_FLEXSPI1, XECC_FLEXSPI2, XECC_SEMC, XRDC2_D0, XRDC2_D1 */ +#define BOARD_BOOTCLOCKRUN_BUS_LPSR_CLK_ROOT 160000000UL /* Clock consumers of BUS_LPSR_CLK_ROOT output : CAN3, GPIO10, GPIO11, GPIO12, GPIO7, GPIO8, GPIO9, IOMUXC_LPSR, LPI2C5, LPI2C6, LPSPI5, LPSPI6, LPUART11, LPUART12, MUA, MUB, PDM, PIT2, RDC, RTWDOG4, SAI4, SNVS, XRDC2_D0, XRDC2_D1 */ +#define BOARD_BOOTCLOCKRUN_CAN1_CLK_ROOT 24000000UL /* Clock consumers of CAN1_CLK_ROOT output : CAN1 */ +#define BOARD_BOOTCLOCKRUN_CAN2_CLK_ROOT 24000000UL /* Clock consumers of CAN2_CLK_ROOT output : CAN2 */ +#define BOARD_BOOTCLOCKRUN_CAN3_CLK_ROOT 24000000UL /* Clock consumers of CAN3_CLK_ROOT output : CAN3 */ +#define BOARD_BOOTCLOCKRUN_CCM_CLKO1_CLK_ROOT 24000000UL /* Clock consumers of CCM_CLKO1_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_CCM_CLKO2_CLK_ROOT 24000000UL /* Clock consumers of CCM_CLKO2_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL /* Clock consumers of CLK_1M output : EWM, RTWDOG3, RTWDOG4 */ +#define BOARD_BOOTCLOCKRUN_CSI2_CLK_ROOT 24000000UL /* Clock consumers of CSI2_CLK_ROOT output : MIPI_CSI2RX */ +#define BOARD_BOOTCLOCKRUN_CSI2_ESC_CLK_ROOT 24000000UL /* Clock consumers of CSI2_ESC_CLK_ROOT output : MIPI_CSI2RX */ +#define BOARD_BOOTCLOCKRUN_CSI2_UI_CLK_ROOT 24000000UL /* Clock consumers of CSI2_UI_CLK_ROOT output : MIPI_CSI2RX */ +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 24000000UL /* Clock consumers of CSI_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_CSSYS_CLK_ROOT 24000000UL /* Clock consumers of CSSYS_CLK_ROOT output : ARM */ +#define BOARD_BOOTCLOCKRUN_CSTRACE_CLK_ROOT 132000000UL /* Clock consumers of CSTRACE_CLK_ROOT output : ARM */ +#define BOARD_BOOTCLOCKRUN_ELCDIF_CLK_ROOT 24000000UL /* Clock consumers of ELCDIF_CLK_ROOT output : LCDIF */ +#define BOARD_BOOTCLOCKRUN_EMV1_CLK_ROOT 24000000UL /* Clock consumers of EMV1_CLK_ROOT output : EMVSIM1 */ +#define BOARD_BOOTCLOCKRUN_EMV2_CLK_ROOT 24000000UL /* Clock consumers of EMV2_CLK_ROOT output : EMVSIM2 */ +#define BOARD_BOOTCLOCKRUN_ENET1_CLK_ROOT 24000000UL /* Clock consumers of ENET1_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_ENET2_CLK_ROOT 24000000UL /* Clock consumers of ENET2_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_ENET_1G_REF_CLK 0UL /* Clock consumers of ENET_1G_REF_CLK output : ENET_1G */ +#define BOARD_BOOTCLOCKRUN_ENET_1G_TX_CLK 24000000UL /* Clock consumers of ENET_1G_TX_CLK output : ENET_1G */ +#define BOARD_BOOTCLOCKRUN_ENET_25M_CLK_ROOT 24000000UL /* Clock consumers of ENET_25M_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_ENET_QOS_CLK_ROOT 24000000UL /* Clock consumers of ENET_QOS_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_ENET_QOS_REF_CLK 0UL /* Clock consumers of ENET_QOS_REF_CLK output : ENET_QOS */ +#define BOARD_BOOTCLOCKRUN_ENET_QOS_TX_CLK 0UL /* Clock consumers of ENET_QOS_TX_CLK output : ENET_QOS */ +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL /* Clock consumers of ENET_REF_CLK output : ENET */ +#define BOARD_BOOTCLOCKRUN_ENET_TIMER1_CLK_ROOT 24000000UL /* Clock consumers of ENET_TIMER1_CLK_ROOT output : ENET */ +#define BOARD_BOOTCLOCKRUN_ENET_TIMER2_CLK_ROOT 24000000UL /* Clock consumers of ENET_TIMER2_CLK_ROOT output : ENET_1G */ +#define BOARD_BOOTCLOCKRUN_ENET_TIMER3_CLK_ROOT 24000000UL /* Clock consumers of ENET_TIMER3_CLK_ROOT output : ENET_QOS */ +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL /* Clock consumers of ENET_TX_CLK output : ENET */ +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 24000000UL /* Clock consumers of FLEXIO1_CLK_ROOT output : FLEXIO1 */ +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 24000000UL /* Clock consumers of FLEXIO2_CLK_ROOT output : FLEXIO2 */ +#define BOARD_BOOTCLOCKRUN_FLEXSPI1_CLK_ROOT 24000000UL /* Clock consumers of FLEXSPI1_CLK_ROOT output : FLEXSPI1 */ +#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 24000000UL /* Clock consumers of FLEXSPI2_CLK_ROOT output : FLEXSPI2 */ +#define BOARD_BOOTCLOCKRUN_GC355_CLK_ROOT 492000012UL /* Clock consumers of GC355_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_GPT1_CLK_ROOT 24000000UL /* Clock consumers of GPT1_CLK_ROOT output : GPT1 */ +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 24000000UL /* Clock consumers of GPT1_ipg_clk_highfreq output : N/A */ +#define BOARD_BOOTCLOCKRUN_GPT2_CLK_ROOT 24000000UL /* Clock consumers of GPT2_CLK_ROOT output : GPT2 */ +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 24000000UL /* Clock consumers of GPT2_ipg_clk_highfreq output : N/A */ +#define BOARD_BOOTCLOCKRUN_GPT3_CLK_ROOT 24000000UL /* Clock consumers of GPT3_CLK_ROOT output : GPT3 */ +#define BOARD_BOOTCLOCKRUN_GPT3_IPG_CLK_HIGHFREQ 24000000UL /* Clock consumers of GPT3_ipg_clk_highfreq output : N/A */ +#define BOARD_BOOTCLOCKRUN_GPT4_CLK_ROOT 24000000UL /* Clock consumers of GPT4_CLK_ROOT output : GPT4 */ +#define BOARD_BOOTCLOCKRUN_GPT4_IPG_CLK_HIGHFREQ 24000000UL /* Clock consumers of GPT4_ipg_clk_highfreq output : N/A */ +#define BOARD_BOOTCLOCKRUN_GPT5_CLK_ROOT 24000000UL /* Clock consumers of GPT5_CLK_ROOT output : GPT5 */ +#define BOARD_BOOTCLOCKRUN_GPT5_IPG_CLK_HIGHFREQ 24000000UL /* Clock consumers of GPT5_ipg_clk_highfreq output : N/A */ +#define BOARD_BOOTCLOCKRUN_GPT6_CLK_ROOT 24000000UL /* Clock consumers of GPT6_CLK_ROOT output : GPT6 */ +#define BOARD_BOOTCLOCKRUN_GPT6_IPG_CLK_HIGHFREQ 24000000UL /* Clock consumers of GPT6_ipg_clk_highfreq output : N/A */ +#define BOARD_BOOTCLOCKRUN_LCDIFV2_CLK_ROOT 24000000UL /* Clock consumers of LCDIFV2_CLK_ROOT output : LCDIFV2 */ +#define BOARD_BOOTCLOCKRUN_LPI2C1_CLK_ROOT 24000000UL /* Clock consumers of LPI2C1_CLK_ROOT output : LPI2C1 */ +#define BOARD_BOOTCLOCKRUN_LPI2C2_CLK_ROOT 24000000UL /* Clock consumers of LPI2C2_CLK_ROOT output : LPI2C2 */ +#define BOARD_BOOTCLOCKRUN_LPI2C3_CLK_ROOT 24000000UL /* Clock consumers of LPI2C3_CLK_ROOT output : LPI2C3 */ +#define BOARD_BOOTCLOCKRUN_LPI2C4_CLK_ROOT 24000000UL /* Clock consumers of LPI2C4_CLK_ROOT output : LPI2C4 */ +#define BOARD_BOOTCLOCKRUN_LPI2C5_CLK_ROOT 24000000UL /* Clock consumers of LPI2C5_CLK_ROOT output : LPI2C5 */ +#define BOARD_BOOTCLOCKRUN_LPI2C6_CLK_ROOT 24000000UL /* Clock consumers of LPI2C6_CLK_ROOT output : LPI2C6 */ +#define BOARD_BOOTCLOCKRUN_LPSPI1_CLK_ROOT 24000000UL /* Clock consumers of LPSPI1_CLK_ROOT output : LPSPI1 */ +#define BOARD_BOOTCLOCKRUN_LPSPI2_CLK_ROOT 24000000UL /* Clock consumers of LPSPI2_CLK_ROOT output : LPSPI2 */ +#define BOARD_BOOTCLOCKRUN_LPSPI3_CLK_ROOT 24000000UL /* Clock consumers of LPSPI3_CLK_ROOT output : LPSPI3 */ +#define BOARD_BOOTCLOCKRUN_LPSPI4_CLK_ROOT 24000000UL /* Clock consumers of LPSPI4_CLK_ROOT output : LPSPI4 */ +#define BOARD_BOOTCLOCKRUN_LPSPI5_CLK_ROOT 24000000UL /* Clock consumers of LPSPI5_CLK_ROOT output : LPSPI5 */ +#define BOARD_BOOTCLOCKRUN_LPSPI6_CLK_ROOT 24000000UL /* Clock consumers of LPSPI6_CLK_ROOT output : LPSPI6 */ +#define BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT 24000000UL /* Clock consumers of LPUART10_CLK_ROOT output : LPUART10 */ +#define BOARD_BOOTCLOCKRUN_LPUART11_CLK_ROOT 24000000UL /* Clock consumers of LPUART11_CLK_ROOT output : LPUART11 */ +#define BOARD_BOOTCLOCKRUN_LPUART12_CLK_ROOT 24000000UL /* Clock consumers of LPUART12_CLK_ROOT output : LPUART12 */ +#define BOARD_BOOTCLOCKRUN_LPUART1_CLK_ROOT 24000000UL /* Clock consumers of LPUART1_CLK_ROOT output : LPUART1 */ +#define BOARD_BOOTCLOCKRUN_LPUART2_CLK_ROOT 24000000UL /* Clock consumers of LPUART2_CLK_ROOT output : LPUART2 */ +#define BOARD_BOOTCLOCKRUN_LPUART3_CLK_ROOT 24000000UL /* Clock consumers of LPUART3_CLK_ROOT output : LPUART3 */ +#define BOARD_BOOTCLOCKRUN_LPUART4_CLK_ROOT 24000000UL /* Clock consumers of LPUART4_CLK_ROOT output : LPUART4 */ +#define BOARD_BOOTCLOCKRUN_LPUART5_CLK_ROOT 24000000UL /* Clock consumers of LPUART5_CLK_ROOT output : LPUART5 */ +#define BOARD_BOOTCLOCKRUN_LPUART6_CLK_ROOT 24000000UL /* Clock consumers of LPUART6_CLK_ROOT output : LPUART6 */ +#define BOARD_BOOTCLOCKRUN_LPUART7_CLK_ROOT 24000000UL /* Clock consumers of LPUART7_CLK_ROOT output : LPUART7 */ +#define BOARD_BOOTCLOCKRUN_LPUART8_CLK_ROOT 24000000UL /* Clock consumers of LPUART8_CLK_ROOT output : LPUART8 */ +#define BOARD_BOOTCLOCKRUN_LPUART9_CLK_ROOT 24000000UL /* Clock consumers of LPUART9_CLK_ROOT output : LPUART9 */ +#define BOARD_BOOTCLOCKRUN_M4_CLK_ROOT 392727272UL /* Clock consumers of M4_CLK_ROOT output : ARM, DMA1, DMAMUX1, SSARC_HP, SSARC_LP, XRDC2_D0, XRDC2_D1 */ +#define BOARD_BOOTCLOCKRUN_M4_SYSTICK_CLK_ROOT 24000000UL /* Clock consumers of M4_SYSTICK_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_M7_CLK_ROOT 996000000UL /* Clock consumers of M7_CLK_ROOT output : ARM */ +#define BOARD_BOOTCLOCKRUN_M7_SYSTICK_CLK_ROOT 100000UL /* Clock consumers of M7_SYSTICK_CLK_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_MIC_CLK_ROOT 24000000UL /* Clock consumers of MIC_CLK_ROOT output : ASRC, PDM, SPDIF */ +#define BOARD_BOOTCLOCKRUN_MIPI_DSI_TX_CLK_ESC_ROOT 24000000UL /* Clock consumers of MIPI_DSI_TX_CLK_ESC_ROOT output : N/A */ +#define BOARD_BOOTCLOCKRUN_MIPI_ESC_CLK_ROOT 24000000UL /* Clock consumers of MIPI_ESC_CLK_ROOT output : DSI_HOST */ +#define BOARD_BOOTCLOCKRUN_MIPI_REF_CLK_ROOT 24000000UL /* Clock consumers of MIPI_REF_CLK_ROOT output : DSI_HOST */ +#define BOARD_BOOTCLOCKRUN_MQS_CLK_ROOT 24000000UL /* Clock consumers of MQS_CLK_ROOT output : ASRC */ +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 24000000UL /* Clock consumers of MQS_MCLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_OSC_24M 24000000UL /* Clock consumers of OSC_24M output : SPDIF, TMPSNS, USBPHY1, USBPHY2 */ +#define BOARD_BOOTCLOCKRUN_OSC_32K 32768UL /* Clock consumers of OSC_32K output : GPIO13, RTWDOG3, RTWDOG4 */ +#define BOARD_BOOTCLOCKRUN_OSC_RC_16M 16000000UL /* Clock consumers of OSC_RC_16M output : CCM, DCDC, EWM, GPT1, GPT2, GPT3, GPT4, GPT5, GPT6, SSARC_LP */ +#define BOARD_BOOTCLOCKRUN_OSC_RC_400M 400000000UL /* Clock consumers of OSC_RC_400M output : N/A */ +#define BOARD_BOOTCLOCKRUN_OSC_RC_48M 48000000UL /* Clock consumers of OSC_RC_48M output : N/A */ +#define BOARD_BOOTCLOCKRUN_OSC_RC_48M_DIV2 24000000UL /* Clock consumers of OSC_RC_48M_DIV2 output : N/A */ +#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_CLK 0UL /* Clock consumers of PLL_AUDIO_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_MODULATION 0UL /* Clock consumers of PLL_AUDIO_SS_MODULATION output : N/A */ +#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_RANGE 0UL /* Clock consumers of PLL_AUDIO_SS_RANGE output : N/A */ +#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_CLK 984000025UL /* Clock consumers of PLL_VIDEO_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_MODULATION 0UL /* Clock consumers of PLL_VIDEO_SS_MODULATION output : N/A */ +#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_RANGE 0UL /* Clock consumers of PLL_VIDEO_SS_RANGE output : N/A */ +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 24000000UL /* Clock consumers of SAI1_CLK_ROOT output : SPDIF */ +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 24000000UL /* Clock consumers of SAI1_MCLK1 output : SAI1 */ +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 0UL /* Clock consumers of SAI1_MCLK2 output : SAI1 */ +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 24000000UL /* Clock consumers of SAI1_MCLK3 output : SAI1 */ +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 24000000UL /* Clock consumers of SAI2_CLK_ROOT output : ASRC */ +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 24000000UL /* Clock consumers of SAI2_MCLK1 output : SAI2 */ +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL /* Clock consumers of SAI2_MCLK2 output : SAI2 */ +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 24000000UL /* Clock consumers of SAI2_MCLK3 output : SAI2 */ +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 24000000UL /* Clock consumers of SAI3_CLK_ROOT output : ASRC, SPDIF */ +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 24000000UL /* Clock consumers of SAI3_MCLK1 output : SAI3 */ +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL /* Clock consumers of SAI3_MCLK2 output : SAI3 */ +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 24000000UL /* Clock consumers of SAI3_MCLK3 output : SAI3 */ +#define BOARD_BOOTCLOCKRUN_SAI4_CLK_ROOT 24000000UL /* Clock consumers of SAI4_CLK_ROOT output : ASRC, SPDIF */ +#define BOARD_BOOTCLOCKRUN_SAI4_MCLK1 24000000UL /* Clock consumers of SAI4_MCLK1 output : SAI4 */ +#define BOARD_BOOTCLOCKRUN_SAI4_MCLK2 0UL /* Clock consumers of SAI4_MCLK2 output : SAI4 */ +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 198000000UL /* Clock consumers of SEMC_CLK_ROOT output : SEMC, XECC_FLEXSPI1, XECC_FLEXSPI2, XECC_SEMC, XRDC2_D0, XRDC2_D1 */ +#define BOARD_BOOTCLOCKRUN_SPDIF_CLK_ROOT 24000000UL /* Clock consumers of SPDIF_CLK_ROOT output : SPDIF */ +#define BOARD_BOOTCLOCKRUN_SPDIF_EXTCLK_OUT 0UL /* Clock consumers of SPDIF_EXTCLK_OUT output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_CLK 0UL /* Clock consumers of SYS_PLL1_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV2_CLK 0UL /* Clock consumers of SYS_PLL1_DIV2_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV5_CLK 0UL /* Clock consumers of SYS_PLL1_DIV5_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_MODULATION 0UL /* Clock consumers of SYS_PLL1_SS_MODULATION output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_RANGE 0UL /* Clock consumers of SYS_PLL1_SS_RANGE output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_CLK 528000000UL /* Clock consumers of SYS_PLL2_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD0_CLK 352000000UL /* Clock consumers of SYS_PLL2_PFD0_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD1_CLK 594000000UL /* Clock consumers of SYS_PLL2_PFD1_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD2_CLK 396000000UL /* Clock consumers of SYS_PLL2_PFD2_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD3_CLK 297000000UL /* Clock consumers of SYS_PLL2_PFD3_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_MODULATION 0UL /* Clock consumers of SYS_PLL2_SS_MODULATION output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_RANGE 0UL /* Clock consumers of SYS_PLL2_SS_RANGE output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_CLK 480000000UL /* Clock consumers of SYS_PLL3_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_DIV2_CLK 240000000UL /* Clock consumers of SYS_PLL3_DIV2_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD0_CLK 664615384UL /* Clock consumers of SYS_PLL3_PFD0_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD1_CLK 508235294UL /* Clock consumers of SYS_PLL3_PFD1_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD2_CLK 270000000UL /* Clock consumers of SYS_PLL3_PFD2_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD3_CLK 392727272UL /* Clock consumers of SYS_PLL3_PFD3_CLK output : N/A */ +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 24000000UL /* Clock consumers of USDHC1_CLK_ROOT output : USDHC1 */ +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 24000000UL /* Clock consumers of USDHC2_CLK_ROOT output : USDHC2 */ /******************************************************************************* diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c index b70a7c5bd..81ffb35e3 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c @@ -6,11 +6,11 @@ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo -product: Pins v13.1 +product: Pins v14.0 processor: MIMXRT1176xxxxx package_id: MIMXRT1176DVMAA mcu_data: ksdk2_0 -processor_version: 13.0.2 +processor_version: 14.0.1 board: MIMXRT1170-EVKB external_user_signals: {} pin_labels: diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex index 9b87a805d..e68b9ea7e 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex @@ -1,5 +1,5 @@ - + MIMXRT1176xxxxx MIMXRT1176DVMAA @@ -19,17 +19,18 @@ false - + - 13.0.2 + 14.0.1 + @@ -103,13 +104,13 @@ - + - 13.0.2 + 14.0.1 @@ -373,10 +374,7 @@ - - - - + 13.0.2 c_array diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index a9ba00305..8ed72aa19 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -64,7 +64,30 @@ TU_ATTR_USED const uint8_t dcd_data[] = { 0x00 }; // //--------------------------------------------------------------------+ -static void init_usb_phy(USBPHY_Type* usb_phy) { +// unify naming convention +#if !defined(USBPHY1) && defined(USBPHY) + #define USBPHY1 USBPHY +#endif + +static void init_usb_phy(uint8_t usb_id) { + USBPHY_Type* usb_phy; + + if (usb_id == 0) { + usb_phy = USBPHY1; + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, BOARD_XTAL0_CLK_HZ); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, BOARD_XTAL0_CLK_HZ); + } + #ifdef USBPHY2 + else if (usb_id == 1) { + usb_phy = USBPHY2; + CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, BOARD_XTAL0_CLK_HZ); + CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, BOARD_XTAL0_CLK_HZ); + } + #endif + else { + return; + } + // Enable PHY support for Low speed device + LS via FS Hub usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; @@ -122,22 +145,9 @@ void board_init(void) //------------- USB -------------// // Note: RT105x RT106x and later have dual USB controllers. - - // Clock - CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); - CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); - -#ifdef USBPHY1 - init_usb_phy(USBPHY1); -#else - init_usb_phy(USBPHY); -#endif - + init_usb_phy(0); // USB0 #ifdef USBPHY2 - // USB1 - CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); - CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); - init_usb_phy(USBPHY2); + init_usb_phy(1); // USB1 #endif } From 025ffa200c5508c23e76316045792af4f7728da5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 17:36:52 +0700 Subject: [PATCH 73/82] add spec version to dwc2 info --- src/portable/synopsys/dwc2/dwc2_info.md | 1 + src/portable/synopsys/dwc2/dwc2_info.py | 14 +- src/portable/synopsys/dwc2/hwcfg_list.md | 777 ----------------------- 3 files changed, 12 insertions(+), 780 deletions(-) delete mode 100644 src/portable/synopsys/dwc2/hwcfg_list.md diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index d093502b0..8690a0755 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -2,6 +2,7 @@ |:----------------------------|:----------------|:--------------------|:-----------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:-----------| | guid | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00001200 | 0x00002000 | 0x00001200 | 0x00001100 | 0x00003000 | 0x00003100 | 0x00002000 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | | gsnpsid | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54281A | 0x4F54281A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | +| - specs version | 2.80a | 3.30a | 4.00a | 2.81a | 2.81a | 2.81a | 3.20a | 2.81a | 2.81a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | | ghwcfg1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | | ghwcfg2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x229DCD20 | 0x229ED590 | 0x229DCD20 | 0x229ED520 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229FE1D0 | 0x229ED520 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | | - op_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 03c095655..55bec3d23 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -36,6 +36,7 @@ dwc2_reg_value = { # }, dwc2_info = {key: {field: value for field, value in zip(dwc2_reg_list, values)} for key, values in dwc2_reg_value.items()} + class GHWCFG2(ctypes.LittleEndianStructure): _fields_ = [ ("op_mode", ctypes.c_uint32, 3), @@ -130,13 +131,20 @@ def render_md(): # Create an empty list to hold the dictionaries dwc2_info_list = [] - #Iterate over the dwc2_info dictionary and extract fields + # Iterate over the dwc2_info dictionary and extract fields for device, reg_values in dwc2_info.items(): entry_dict = {"Device": device} for r_name, r_value in reg_values.items(): entry_dict[r_name] = f"0x{r_value:08X}" - # Print bit-field values - if r_name.upper() in globals(): + + if r_name == 'gsnpsid': + # Get dwc2 specs version + major = ((r_value >> 8) >> 4) & 0x0F + minor = (r_value >> 4) & 0xFF + patch = chr((r_value & 0x0F) + ord('a') - 0xA) + entry_dict[f' - specs version'] = f"{major:X}.{minor:02X}{patch}" + elif r_name.upper() in globals(): + # Get bit-field values which exist as ctypes structures class_name = globals()[r_name.upper()] ghwcfg = class_name.from_buffer_copy(r_value.to_bytes(4, byteorder='little')) for field_name, field_type, _ in class_name._fields_: diff --git a/src/portable/synopsys/dwc2/hwcfg_list.md b/src/portable/synopsys/dwc2/hwcfg_list.md deleted file mode 100644 index b5590da00..000000000 --- a/src/portable/synopsys/dwc2/hwcfg_list.md +++ /dev/null @@ -1,777 +0,0 @@ -# DWC2 Hardware Configuration Registers - -## Broadcom BCM2711 (Pi4) - -dwc2->guid = 2708A000 -dwc2->gsnpsid = 4F54280A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 228DDD50 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 2 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 1 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 7 -hw_cfg2->num_host_ch = 7 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 0 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = FF000E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 0 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 4080 - -dwc2->ghwcfg4 = 1FF00020 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 0 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 0 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 15 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## EFM32GG FS - -dwc2->guid = 0 -dwc2->gsnpsid = 4F54330A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 228F5910 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 2 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 6 -hw_cfg2->num_host_ch = 13 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 0 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 1F204E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 0 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 1 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 498 - -dwc2->ghwcfg4 = 1BF08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 13 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## ESP32-S2 Fullspeed - -dwc2->guid = 0 -dwc2->gsnpsid = 4F54400A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 224DD930 -hw_cfg2->op_mode = 2 -hw_cfg2->arch = 3 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 1 -hw_cfg2->fs_phy_type = 2 -hw_cfg2->num_dev_ep = 6 -hw_cfg2->num_host_ch = 9 -hw_cfg2->period_channel_support = 0 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 1 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 22 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = C804B5 -hw_cfg3->xfer_size_width = 10 -hw_cfg3->packet_size_width = 5 -hw_cfg3->otg_enable = 0 -hw_cfg3->i2c_enable = 0 -hw_cfg3->vendor_ctrl_itf = 1 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 1 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 23130 - -dwc2->ghwcfg4 = D3F0A030 -hw_cfg4->num_dev_period_in_ep = 10 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 0 -hw_cfg4->hibernation = 1 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 1 -hw_cfg4->acg_enable = 1 -hw_cfg4->utmi_phy_data_width = 1 -hw_cfg4->dev_ctrl_ep_num = 10 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 0 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 0 -hw_cfg4->dedicated_fifos = 0 -hw_cfg4->num_dev_in_eps = 13 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 1 - -## STM32F407 and STM32F207 - -STM32F407 and STM32F207 are exactly the same - -### STM32F407 Fullspeed - -dwc2->guid = 1200 -dwc2->gsnpsid = 4F54281A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229DCD20 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 3 -hw_cfg2->num_host_ch = 7 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 20001E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 512 - -dwc2->ghwcfg4 = FF08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 7 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -### STM32F407 Highspeed - -dwc2->guid = 1100 -dwc2->gsnpsid = 4F54281A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229ED590 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 2 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 2 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 5 -hw_cfg2->num_host_ch = 11 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 3F403E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 1 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 1012 - -dwc2->ghwcfg4 = 17F00030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 0 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 11 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## STM32F411 Fullspeed - -dwc2->guid = 1200 -dwc2->gsnpsid = 4F54281A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229DCD20 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 3 -hw_cfg2->num_host_ch = 7 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 20001E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 512 - -dwc2->ghwcfg4 = FF08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 7 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## STM32F412 FS - -dwc2->guid = 2000 -dwc2->gsnpsid = 4F54320A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229ED520 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 5 -hw_cfg2->num_host_ch = 11 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 200D1E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 1 -hw_cfg3->total_fifo_size = 512 - -dwc2->ghwcfg4 = 17F08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 11 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## STM32F723 - -### STM32F723 HighSpeed - -dwc2->guid = 3100 -dwc2->gsnpsid = 4F54330A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229FE1D0 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 2 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 3 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 8 -hw_cfg2->num_host_ch = 15 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 3EED2E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 0 -hw_cfg3->vendor_ctrl_itf = 1 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 1 -hw_cfg3->total_fifo_size = 1006 - -dwc2->ghwcfg4 = 23F00030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 0 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 1 -hw_cfg4->dma_desc_enable = 1 -hw_cfg4->dma_dynamic = 0 - -### STM32F723 Fullspeed - -dwc2->guid = 3000 -dwc2->gsnpsid = 4F54330A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229ED520 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 5 -hw_cfg2->num_host_ch = 11 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 200D1E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 1 -hw_cfg3->total_fifo_size = 512 - -dwc2->ghwcfg4 = 17F08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 11 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## STM32F767 FS - -dwc2->guid = 2000 -dwc2->gsnpsid = 4F54320A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229ED520 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 5 -hw_cfg2->num_host_ch = 11 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 200D1E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 1 -hw_cfg3->total_fifo_size = 512 - -dwc2->ghwcfg4 = 17F08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 11 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## STM32H743 (both cores HS) - -dwc2->guid = 2300 -dwc2->gsnpsid = 4F54330A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229FE190 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 2 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 2 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 8 -hw_cfg2->num_host_ch = 15 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 3B8D2E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 0 -hw_cfg3->vendor_ctrl_itf = 1 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 1 -hw_cfg3->total_fifo_size = 952 - -dwc2->ghwcfg4 = E3F00030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 0 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 1 -hw_cfg4->dma_desc_enable = 1 -hw_cfg4->dma_dynamic = 1 - -## STM32L476 FS - -dwc2->guid = 2000 -dwc2->gsnpsid = 4F54310A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 229ED520 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 5 -hw_cfg2->num_host_ch = 11 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 1 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 200D1E8 -hw_cfg3->xfer_size_width = 8 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 1 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 1 -hw_cfg3->lpm_mode = 1 -hw_cfg3->total_fifo_size = 512 - -dwc2->ghwcfg4 = 17F08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 11 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## GD32VF103 Fullspeed - -dwc2->guid = 1000 -dwc2->gsnpsid = 0 -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 0 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 0 -hw_cfg2->point2point = 0 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 0 -hw_cfg2->num_dev_ep = 0 -hw_cfg2->num_host_ch = 0 -hw_cfg2->period_channel_support = 0 -hw_cfg2->enable_dynamic_fifo = 0 -hw_cfg2->mul_cpu_int = 0 -hw_cfg2->nperiod_tx_q_depth = 0 -hw_cfg2->host_period_tx_q_depth = 0 -hw_cfg2->dev_token_q_depth = 0 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 0 -hw_cfg3->xfer_size_width = 0 -hw_cfg3->packet_size_width = 0 -hw_cfg3->otg_enable = 0 -hw_cfg3->i2c_enable = 0 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 0 - -dwc2->ghwcfg4 = 0 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 0 -hw_cfg4->ahb_freq_min = 0 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 0 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 0 -hw_cfg4->vbus_valid_filter_enabled = 0 -hw_cfg4->a_valid_filter_enabled = 0 -hw_cfg4->b_valid_filter_enabled = 0 -hw_cfg4->dedicated_fifos = 0 -hw_cfg4->num_dev_in_eps = 0 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 0 - -## XMC4500 - -dwc2->guid = AEC000 -dwc2->gsnpsid = 4F54292A -dwc2->ghwcfg1 = 0 - -dwc2->ghwcfg2 = 228F5930 -hw_cfg2->op_mode = 0 -hw_cfg2->arch = 2 -hw_cfg2->point2point = 1 -hw_cfg2->hs_phy_type = 0 -hw_cfg2->fs_phy_type = 1 -hw_cfg2->num_dev_ep = 6 -hw_cfg2->num_host_ch = 13 -hw_cfg2->period_channel_support = 1 -hw_cfg2->enable_dynamic_fifo = 1 -hw_cfg2->mul_cpu_int = 0 -hw_cfg2->nperiod_tx_q_depth = 2 -hw_cfg2->host_period_tx_q_depth = 2 -hw_cfg2->dev_token_q_depth = 8 -hw_cfg2->otg_enable_ic_usb = 0 - -dwc2->ghwcfg3 = 27A01E5 -hw_cfg3->xfer_size_width = 5 -hw_cfg3->packet_size_width = 6 -hw_cfg3->otg_enable = 1 -hw_cfg3->i2c_enable = 1 -hw_cfg3->vendor_ctrl_itf = 0 -hw_cfg3->optional_feature_removed = 0 -hw_cfg3->synch_reset = 0 -hw_cfg3->otg_adp_support = 0 -hw_cfg3->otg_enable_hsic = 0 -hw_cfg3->battery_charger_support = 0 -hw_cfg3->lpm_mode = 0 -hw_cfg3->total_fifo_size = 634 - -dwc2->ghwcfg4 = DBF08030 -hw_cfg4->num_dev_period_in_ep = 0 -hw_cfg4->power_optimized = 1 -hw_cfg4->ahb_freq_min = 1 -hw_cfg4->hibernation = 0 -hw_cfg4->service_interval_mode = 0 -hw_cfg4->ipg_isoc_en = 0 -hw_cfg4->acg_enable = 0 -hw_cfg4->utmi_phy_data_width = 2 -hw_cfg4->dev_ctrl_ep_num = 0 -hw_cfg4->iddg_filter_enabled = 1 -hw_cfg4->vbus_valid_filter_enabled = 1 -hw_cfg4->a_valid_filter_enabled = 1 -hw_cfg4->b_valid_filter_enabled = 1 -hw_cfg4->dedicated_fifos = 1 -hw_cfg4->num_dev_in_eps = 13 -hw_cfg4->dma_desc_enable = 0 -hw_cfg4->dma_dynamic = 1 From 42e7bd4ce8f31837166c52e067e21c773839c53a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 21:39:28 +0700 Subject: [PATCH 74/82] update clock setup for H743 eval --- hw/bsp/stm32h7/boards/daisyseed/board.h | 2 +- hw/bsp/stm32h7/boards/stm32h723nucleo/board.h | 2 +- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 2 +- hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | 89 +++--- .../cubemx/stm32h743nucleo.ioc | 274 ++++++++++++++++++ hw/bsp/stm32h7/boards/stm32h745disco/board.h | 2 +- .../boards/waveshare_openh743i/board.h | 2 +- hw/bsp/stm32h7/family.c | 11 +- 8 files changed, 338 insertions(+), 46 deletions(-) create mode 100644 hw/bsp/stm32h7/boards/stm32h743nucleo/cubemx/stm32h743nucleo.ioc diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.h b/hw/bsp/stm32h7/boards/daisyseed/board.h index 0ad809720..abc07488b 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.h +++ b/hw/bsp/stm32h7/boards/daisyseed/board.h @@ -55,7 +55,7 @@ //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) +static inline void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h index 0eb5e76ad..3d9344a87 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h @@ -62,7 +62,7 @@ //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) +static inline void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index c46b525ca..22d66d735 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -61,7 +61,7 @@ //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) { +static inline void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 }; diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h index 8c6a7ce5a..614e6e38b 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -53,60 +53,73 @@ //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; - RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; +static inline void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - /* The PWR block is always enabled on the H7 series- there is no clock - enable. For now, use the default VOS3 scale mode (lowest) and limit clock - frequencies to avoid potential current draw problems from bus - power when using the max clock speeds throughout the chip. */ + /** Supply configuration update enable + */ + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); - /* Enable HSE Oscillator and activate PLL1 with HSE as source */ + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 100; RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 7; - RCC_OscInitStruct.PLL.PLLR = 2; /* Unused */ - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0; - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLQ = 4; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; RCC_OscInitStruct.PLL.PLLFRACN = 0; - HAL_RCC_OscConfig(&RCC_OscInitStruct); + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ - RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ - RCC_CLOCKTYPE_D3PCLK1); + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 + |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; - - /* Unlike on the STM32F4 family, it appears the maximum APB frequencies are - device-dependent- 120 MHz for this board according to Figure 2 of - the datasheet. Dividing by half will be safe for now. */ + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - /* 4 wait states required for 168MHz and VOS3. */ - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } - /* Like on F4, on H7, USB's actual peripheral clock and bus clock are - separate. However, the main system PLL (PLL1) doesn't have a direct - connection to the USB peripheral clock to generate 48 MHz, so we do this - dance. This will connect PLL1's Q output to the USB peripheral clock. */ - RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct = { 0 }; - - RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); + // Initialize USB clock + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 }; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.PLL3.PLL3M = 1; + PeriphClkInitStruct.PLL3.PLL3N = 24; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 4; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_3; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } } static inline void board_stm32h7_post_init(void) diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/cubemx/stm32h743nucleo.ioc b/hw/bsp/stm32h7/boards/stm32h743nucleo/cubemx/stm32h743nucleo.ioc new file mode 100644 index 000000000..bc269a852 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/cubemx/stm32h743nucleo.ioc @@ -0,0 +1,274 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +ETH.IPParameters=MediaInterface +ETH.MediaInterface=HAL_ETH_RMII_MODE +File.Version=6 +KeepUserPlacement=false +Mcu.CPN=STM32H743ZIT6 +Mcu.Family=STM32H7 +Mcu.IP0=CORTEX_M7 +Mcu.IP1=ETH +Mcu.IP2=NVIC +Mcu.IP3=RCC +Mcu.IP4=SYS +Mcu.IP5=USART3 +Mcu.IP6=USB_OTG_FS +Mcu.IPNb=7 +Mcu.Name=STM32H743ZITx +Mcu.Package=LQFP144 +Mcu.Pin0=PC13 +Mcu.Pin1=PC14-OSC32_IN (OSC32_IN) +Mcu.Pin10=PC5 +Mcu.Pin11=PB0 +Mcu.Pin12=PB13 +Mcu.Pin13=PB14 +Mcu.Pin14=PD8 +Mcu.Pin15=PD9 +Mcu.Pin16=PD10 +Mcu.Pin17=PG7 +Mcu.Pin18=PA8 +Mcu.Pin19=PA9 +Mcu.Pin2=PC15-OSC32_OUT (OSC32_OUT) +Mcu.Pin20=PA11 +Mcu.Pin21=PA12 +Mcu.Pin22=PG11 +Mcu.Pin23=PG13 +Mcu.Pin24=PE1 +Mcu.Pin25=VP_SYS_VS_Systick +Mcu.Pin3=PH0-OSC_IN (PH0) +Mcu.Pin4=PH1-OSC_OUT (PH1) +Mcu.Pin5=PC1 +Mcu.Pin6=PA1 +Mcu.Pin7=PA2 +Mcu.Pin8=PA7 +Mcu.Pin9=PC4 +Mcu.PinsNb=26 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32H743ZITx +MxCube.Version=6.9.2 +MxDb.Version=DB.6.0.92 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PA1.Locked=true +PA1.Mode=RMII +PA1.Signal=ETH_REF_CLK +PA11.Locked=true +PA11.Mode=Device_Only +PA11.Signal=USB_OTG_FS_DM +PA12.Locked=true +PA12.Mode=Device_Only +PA12.Signal=USB_OTG_FS_DP +PA2.Locked=true +PA2.Mode=RMII +PA2.Signal=ETH_MDIO +PA7.Locked=true +PA7.Mode=RMII +PA7.Signal=ETH_CRS_DV +PA8.Locked=true +PA8.Mode=Activate_SOF_FS +PA8.Signal=USB_OTG_FS_SOF +PA9.Locked=true +PA9.Mode=Activate_VBUS +PA9.Signal=USB_OTG_FS_VBUS +PB0.GPIOParameters=GPIO_Label +PB0.GPIO_Label=LD1 [Green Led] +PB0.Locked=true +PB0.Signal=GPIO_Output +PB13.Locked=true +PB13.Mode=RMII +PB13.Signal=ETH_TXD1 +PB14.GPIOParameters=GPIO_Label +PB14.GPIO_Label=LD3 [Red Led] +PB14.Locked=true +PB14.Signal=GPIO_Output +PC1.Locked=true +PC1.Mode=RMII +PC1.Signal=ETH_MDC +PC13.GPIOParameters=GPIO_Label +PC13.GPIO_Label=B1 [Blue PushButton] +PC13.Locked=true +PC13.Signal=GPIO_Input +PC14-OSC32_IN\ (OSC32_IN).Locked=true +PC14-OSC32_IN\ (OSC32_IN).Mode=LSE-External-Oscillator +PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN +PC15-OSC32_OUT\ (OSC32_OUT).Locked=true +PC15-OSC32_OUT\ (OSC32_OUT).Mode=LSE-External-Oscillator +PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT +PC4.Locked=true +PC4.Mode=RMII +PC4.Signal=ETH_RXD0 +PC5.Locked=true +PC5.Mode=RMII +PC5.Signal=ETH_RXD1 +PD10.GPIOParameters=GPIO_Label +PD10.GPIO_Label=USB_OTG_FS_PWR_EN +PD10.Locked=true +PD10.Signal=GPIO_Output +PD8.GPIOParameters=GPIO_Label +PD8.GPIO_Label=STLINK_RX +PD8.Locked=true +PD8.Mode=Asynchronous +PD8.Signal=USART3_TX +PD9.GPIOParameters=GPIO_Label +PD9.GPIO_Label=STLINK_TX +PD9.Locked=true +PD9.Mode=Asynchronous +PD9.Signal=USART3_RX +PE1.GPIOParameters=GPIO_Label +PE1.GPIO_Label=LD2 [Yellow Led] +PE1.Locked=true +PE1.Signal=GPIO_Output +PG11.Locked=true +PG11.Mode=RMII +PG11.Signal=ETH_TX_EN +PG13.Locked=true +PG13.Mode=RMII +PG13.Signal=ETH_TXD0 +PG7.GPIOParameters=GPIO_Label +PG7.GPIO_Label=USB_OTG_FS_OVCR +PG7.Locked=true +PG7.Signal=GPXTI7 +PH0-OSC_IN\ (PH0).Locked=true +PH0-OSC_IN\ (PH0).Mode=HSE-External-Clock-Source +PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN +PH1-OSC_OUT\ (PH1).Locked=true +PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32H743ZITx +ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.1 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=2 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain=STM32CubeIDE +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=stm32h743nucleo.ioc +ProjectManager.ProjectName=stm32h743nucleo +ProjectManager.ProjectStructure= +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=Makefile +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,false-3-MX_ETH_Init-ETH-false-HAL-true,4-MX_USART3_UART_Init-USART3-false-HAL-true,5-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true +RCC.ADCFreq_Value=16125000 +RCC.AHB12Freq_Value=200000000 +RCC.AHB4Freq_Value=200000000 +RCC.APB1Freq_Value=100000000 +RCC.APB2Freq_Value=100000000 +RCC.APB3Freq_Value=100000000 +RCC.APB4Freq_Value=100000000 +RCC.AXIClockFreq_Value=200000000 +RCC.CECFreq_Value=32000 +RCC.CKPERFreq_Value=64000000 +RCC.CortexFreq_Value=400000000 +RCC.CpuClockFreq_Value=400000000 +RCC.D1CPREFreq_Value=400000000 +RCC.D1PPRE=RCC_APB3_DIV2 +RCC.D2PPRE1=RCC_APB1_DIV2 +RCC.D2PPRE2=RCC_APB2_DIV2 +RCC.D3PPRE=RCC_APB4_DIV2 +RCC.DFSDMACLkFreq_Value=200000000 +RCC.DFSDMFreq_Value=100000000 +RCC.DIVM1=1 +RCC.DIVM3=1 +RCC.DIVN1=100 +RCC.DIVN3=24 +RCC.DIVP1Freq_Value=400000000 +RCC.DIVP2Freq_Value=16125000 +RCC.DIVP3Freq_Value=96000000 +RCC.DIVQ1=4 +RCC.DIVQ1Freq_Value=200000000 +RCC.DIVQ2Freq_Value=16125000 +RCC.DIVQ3=4 +RCC.DIVQ3Freq_Value=48000000 +RCC.DIVR1Freq_Value=400000000 +RCC.DIVR2Freq_Value=16125000 +RCC.DIVR3Freq_Value=96000000 +RCC.FDCANFreq_Value=200000000 +RCC.FMCFreq_Value=200000000 +RCC.FamilyName=M +RCC.HCLK3ClockFreq_Value=200000000 +RCC.HCLKFreq_Value=200000000 +RCC.HPRE=RCC_HCLK_DIV2 +RCC.HRTIMFreq_Value=200000000 +RCC.HSE_VALUE=8000000 +RCC.I2C123Freq_Value=100000000 +RCC.I2C4Freq_Value=100000000 +RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM3,DIVN1,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL3FRACN,PLLFRACN,PLLSourceVirtual,PWR_Regulator_Voltage_Scale,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value +RCC.LPTIM1Freq_Value=100000000 +RCC.LPTIM2Freq_Value=100000000 +RCC.LPTIM345Freq_Value=100000000 +RCC.LPUART1Freq_Value=100000000 +RCC.LTDCFreq_Value=96000000 +RCC.MCO1PinFreq_Value=64000000 +RCC.MCO2PinFreq_Value=400000000 +RCC.PLL2FRACN=0 +RCC.PLL3FRACN=0 +RCC.PLLFRACN=0 +RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE +RCC.PWR_Regulator_Voltage_Scale=PWR_REGULATOR_VOLTAGE_SCALE1 +RCC.QSPIFreq_Value=200000000 +RCC.RNGFreq_Value=48000000 +RCC.RTCFreq_Value=32000 +RCC.SAI1Freq_Value=200000000 +RCC.SAI23Freq_Value=200000000 +RCC.SAI4AFreq_Value=200000000 +RCC.SAI4BFreq_Value=200000000 +RCC.SDMMCFreq_Value=200000000 +RCC.SPDIFRXFreq_Value=200000000 +RCC.SPI123Freq_Value=200000000 +RCC.SPI45Freq_Value=100000000 +RCC.SPI6Freq_Value=100000000 +RCC.SWPMI1Freq_Value=100000000 +RCC.SYSCLKFreq_VALUE=400000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.Tim1OutputFreq_Value=200000000 +RCC.Tim2OutputFreq_Value=200000000 +RCC.TraceFreq_Value=64000000 +RCC.USART16Freq_Value=100000000 +RCC.USART234578Freq_Value=100000000 +RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3 +RCC.USBFreq_Value=48000000 +RCC.VCO1OutputFreq_Value=800000000 +RCC.VCO2OutputFreq_Value=32250000 +RCC.VCO3OutputFreq_Value=192000000 +RCC.VCOInput1Freq_Value=8000000 +RCC.VCOInput2Freq_Value=250000 +RCC.VCOInput3Freq_Value=8000000 +SH.GPXTI7.0=GPIO_EXTI7 +SH.GPXTI7.ConfNb=1 +USART3.IPParameters=VirtualMode-Asynchronous +USART3.VirtualMode-Asynchronous=VM_ASYNC +USB_OTG_FS.IPParameters=VirtualMode +USB_OTG_FS.VirtualMode=Device_Only +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=NUCLEO-H743ZI2 +boardIOC=true diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/hw/bsp/stm32h7/boards/stm32h745disco/board.h index d7d3e8723..6d1506ca1 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -55,7 +55,7 @@ //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) +static inline void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h index a3d0d07f9..8f4af6f48 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h @@ -104,7 +104,7 @@ //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) +static inline void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 309a4239e..adeb38e74 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -29,19 +29,23 @@ #include "stm32h7xx_hal.h" #include "bsp/board_api.h" + +TU_ATTR_UNUSED static void Error_Handler(void) { +} + #include "board.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -// Despite being call USB2_OTG +// Despite being call USB2_OTG_FS on some MCUs // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port void OTG_FS_IRQHandler(void) { tud_int_handler(0); } -// Despite being call USB2_OTG +// Despite being call USB1_OTG_HS on some MCUs // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port void OTG_HS_IRQHandler(void) { tud_int_handler(1); @@ -79,7 +83,8 @@ void trace_etm_init(void) { #endif void board_init(void) { - board_stm32h7_clock_init(); + // Implemented in board.h + SystemClock_Config(); // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); From 01f22a9e25c9581c1a38559737a7ca7d1fc22c15 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 22:50:10 +0700 Subject: [PATCH 75/82] fix h7 running on fullspeed phy has issue with WFI if not disable ULPI clock --- src/portable/synopsys/dwc2/dwc2_stm32.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 2070c3943..dd78ccd06 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -145,6 +145,22 @@ static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { if (hs_phy_type == HS_PHY_TYPE_NONE) { // Enable on-chip FS PHY dwc2->stm32_gccfg |= STM32_GCCFG_PWRDWN; + + // https://community.st.com/t5/stm32cubemx-mcus/why-stm32h743-usb-fs-doesn-t-work-if-freertos-tickless-idle/m-p/349480#M18867 + // H7 running on full-speed phy need to disable ULPI clock in sleep mode. + // Otherwise, USB won't work when mcu executing WFI/WFE instruction i.e tick-less RTOS. + // Note: there may be other family that is affected by this, but only H7 is tested so far + #if defined(USB_OTG_FS_PERIPH_BASE) && defined(RCC_AHB1LPENR_USB2OTGFSULPILPEN) + if ( USB_OTG_FS_PERIPH_BASE == (uint32_t) dwc2 ) { + RCC->AHB1LPENR &= ~RCC_AHB1LPENR_USB2OTGFSULPILPEN; + } + #endif + + #if defined(USB_OTG_HS_PERIPH_BASE) && defined(RCC_AHB1LPENR_USB1OTGHSULPILPEN) + if ( USB_OTG_HS_PERIPH_BASE == (uint32_t) dwc2 ) { + RCC->AHB1LPENR &= ~RCC_AHB1LPENR_USB1OTGHSULPILPEN; + } + #endif } else { #if CFG_TUSB_MCU != OPT_MCU_STM32U5 // Disable FS PHY, TODO on U5A5 (dwc2 4.11a) 16th bit is 'Host CDP behavior enable' From 51312f70fde779f59dcc48b41132291c10d3ad0b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 11:44:14 +0700 Subject: [PATCH 76/82] move make to examples/build_system add -Wl,--no-warn-rwx-segment for gcc 12+ --- .../build_system}/make/cpu/arm1176.mk | 0 .../build_system}/make/cpu/cortex-a53.mk | 0 .../build_system}/make/cpu/cortex-a72.mk | 0 .../build_system}/make/cpu/cortex-m0.mk | 0 .../build_system}/make/cpu/cortex-m0plus.mk | 0 .../build_system}/make/cpu/cortex-m3.mk | 0 .../build_system}/make/cpu/cortex-m33.mk | 0 .../build_system}/make/cpu/cortex-m4.mk | 0 .../build_system}/make/cpu/cortex-m7.mk | 0 .../build_system}/make/toolchain/arm_gcc.mk | 9 ++++++++- .../make/toolchain/arm_gcc_rules.mk | 0 .../build_system}/make/toolchain/arm_iar.mk | 0 .../make/toolchain/arm_iar_rules.mk | 0 examples/make.mk | 18 ++++++++---------- examples/rules.mk | 2 +- tools/build_family.py | 3 ++- 16 files changed, 19 insertions(+), 13 deletions(-) rename {tools => examples/build_system}/make/cpu/arm1176.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-a53.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-a72.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-m0.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-m0plus.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-m3.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-m33.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-m4.mk (100%) rename {tools => examples/build_system}/make/cpu/cortex-m7.mk (100%) rename {tools => examples/build_system}/make/toolchain/arm_gcc.mk (87%) rename {tools => examples/build_system}/make/toolchain/arm_gcc_rules.mk (100%) rename {tools => examples/build_system}/make/toolchain/arm_iar.mk (100%) rename {tools => examples/build_system}/make/toolchain/arm_iar_rules.mk (100%) diff --git a/tools/make/cpu/arm1176.mk b/examples/build_system/make/cpu/arm1176.mk similarity index 100% rename from tools/make/cpu/arm1176.mk rename to examples/build_system/make/cpu/arm1176.mk diff --git a/tools/make/cpu/cortex-a53.mk b/examples/build_system/make/cpu/cortex-a53.mk similarity index 100% rename from tools/make/cpu/cortex-a53.mk rename to examples/build_system/make/cpu/cortex-a53.mk diff --git a/tools/make/cpu/cortex-a72.mk b/examples/build_system/make/cpu/cortex-a72.mk similarity index 100% rename from tools/make/cpu/cortex-a72.mk rename to examples/build_system/make/cpu/cortex-a72.mk diff --git a/tools/make/cpu/cortex-m0.mk b/examples/build_system/make/cpu/cortex-m0.mk similarity index 100% rename from tools/make/cpu/cortex-m0.mk rename to examples/build_system/make/cpu/cortex-m0.mk diff --git a/tools/make/cpu/cortex-m0plus.mk b/examples/build_system/make/cpu/cortex-m0plus.mk similarity index 100% rename from tools/make/cpu/cortex-m0plus.mk rename to examples/build_system/make/cpu/cortex-m0plus.mk diff --git a/tools/make/cpu/cortex-m3.mk b/examples/build_system/make/cpu/cortex-m3.mk similarity index 100% rename from tools/make/cpu/cortex-m3.mk rename to examples/build_system/make/cpu/cortex-m3.mk diff --git a/tools/make/cpu/cortex-m33.mk b/examples/build_system/make/cpu/cortex-m33.mk similarity index 100% rename from tools/make/cpu/cortex-m33.mk rename to examples/build_system/make/cpu/cortex-m33.mk diff --git a/tools/make/cpu/cortex-m4.mk b/examples/build_system/make/cpu/cortex-m4.mk similarity index 100% rename from tools/make/cpu/cortex-m4.mk rename to examples/build_system/make/cpu/cortex-m4.mk diff --git a/tools/make/cpu/cortex-m7.mk b/examples/build_system/make/cpu/cortex-m7.mk similarity index 100% rename from tools/make/cpu/cortex-m7.mk rename to examples/build_system/make/cpu/cortex-m7.mk diff --git a/tools/make/toolchain/arm_gcc.mk b/examples/build_system/make/toolchain/arm_gcc.mk similarity index 87% rename from tools/make/toolchain/arm_gcc.mk rename to examples/build_system/make/toolchain/arm_gcc.mk index bba0607df..071b13f68 100644 --- a/tools/make/toolchain/arm_gcc.mk +++ b/examples/build_system/make/toolchain/arm_gcc.mk @@ -9,6 +9,8 @@ GDB = $(CROSS_COMPILE)gdb OBJCOPY = $(CROSS_COMPILE)objcopy SIZE = $(CROSS_COMPILE)size +CC_VERSION := $(shell $(CC) -dumpversion) + # --------------------------------------- # Compiler Flags # --------------------------------------- @@ -65,7 +67,12 @@ LDFLAGS += \ -Wl,-cref \ -Wl,-gc-sections \ -# Some toolchain such as renesas rx does not support --print-memory-usage flags +# renesas rx does not support --print-memory-usage flags ifneq ($(FAMILY),rx) LDFLAGS += -Wl,--print-memory-usage endif + +# from version 12 +ifeq (12,$(firstword $(sort 12 $(CC_VERSION)))) +LDFLAGS += -Wl,--no-warn-rwx-segment +endif diff --git a/tools/make/toolchain/arm_gcc_rules.mk b/examples/build_system/make/toolchain/arm_gcc_rules.mk similarity index 100% rename from tools/make/toolchain/arm_gcc_rules.mk rename to examples/build_system/make/toolchain/arm_gcc_rules.mk diff --git a/tools/make/toolchain/arm_iar.mk b/examples/build_system/make/toolchain/arm_iar.mk similarity index 100% rename from tools/make/toolchain/arm_iar.mk rename to examples/build_system/make/toolchain/arm_iar.mk diff --git a/tools/make/toolchain/arm_iar_rules.mk b/examples/build_system/make/toolchain/arm_iar_rules.mk similarity index 100% rename from tools/make/toolchain/arm_iar_rules.mk rename to examples/build_system/make/toolchain/arm_iar_rules.mk diff --git a/examples/make.mk b/examples/make.mk index 448d7883d..b646b46ce 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -2,14 +2,10 @@ # Common make definition for all examples # --------------------------------------- -# Supported toolchain: gcc, iar -TOOLCHAIN ?= gcc - #-------------- TOP and CURRENT_PATH ------------ -# Set TOP to be the path to get from the current directory (where make was -# invoked) to the top of the tree. $(lastword $(MAKEFILE_LIST)) returns -# the name of this makefile relative to where make was invoked. +# Set TOP to be the path to get from the current directory (where make was invoked) to the top of the tree. +# $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) # strip off /tools/top.mk to get for example ../../.. @@ -38,7 +34,6 @@ __check_defined = \ $(if $(value $1),, \ $(error Undefined make flag: $1$(if $2, ($2)))) - # Build directory BUILD := _build/$(BOARD) @@ -73,7 +68,10 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -#-------------- Cross Compiler ------------ +#-------------- Toolchain ------------ + +# Supported toolchain: gcc, iar +TOOLCHAIN ?= gcc # Can be set by board, default to ARM GCC CROSS_COMPILE ?= arm-none-eabi- @@ -139,8 +137,8 @@ endif # CPU specific flags ifdef CPU_CORE -include $(TOP)/tools/make/cpu/$(CPU_CORE).mk + include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk endif # toolchain specific -include $(TOP)/tools/make/toolchain/arm_$(TOOLCHAIN).mk +include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk diff --git a/examples/rules.mk b/examples/rules.mk index 227849a18..b02665cdd 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -37,7 +37,7 @@ vpath %.c . $(TOP) vpath %.s . $(TOP) vpath %.S . $(TOP) -include $(TOP)/tools/make/toolchain/arm_$(TOOLCHAIN)_rules.mk +include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN)_rules.mk OBJ_DIRS = $(sort $(dir $(OBJ))) diff --git a/tools/build_family.py b/tools/build_family.py index fb90e0edb..cd9884313 100644 --- a/tools/build_family.py +++ b/tools/build_family.py @@ -34,6 +34,7 @@ def build_family(example, family, make_option): # sum all element of same index (column sum) return list(map(sum, list(zip(*result)))) + if __name__ == '__main__': # IAR CC if make_iar_option not in sys.argv: @@ -44,7 +45,7 @@ if __name__ == '__main__': for d in os.scandir("examples"): if d.is_dir() and 'cmake' not in d.name: for entry in os.scandir(d.path): - if entry.is_dir() and 'cmake' not in entry.name: + if entry.is_dir() and 'cmake' not in entry.name and entry.name != 'build_system': all_examples.append(d.name + '/' + entry.name) filter_with_input(all_examples) all_examples.sort() From e54a2c4f3c65551e091cdc79acff5f3aa607cff3 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 11:46:39 +0700 Subject: [PATCH 77/82] rename build_family.py to build_make.py --- .github/workflows/build_aarch64.yml | 2 +- .github/workflows/build_arm.yml | 2 +- .github/workflows/build_msp430.yml | 2 +- .github/workflows/build_renesas.yml | 2 +- .github/workflows/build_riscv.yml | 2 +- .github/workflows/build_win_mac.yml | 2 +- tools/{build_family.py => build_make.py} | 0 7 files changed, 6 insertions(+), 6 deletions(-) rename tools/{build_family.py => build_make.py} (100%) diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index 6ac7ad015..8a91ee630 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -73,7 +73,7 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_family.py ${{ matrix.family }} + run: python3 tools/build_make.py ${{ matrix.family }} - name: Linker Map run: | diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 171c1fec3..402b89e0a 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -66,7 +66,7 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_family.py ${{ matrix.family }} + run: python3 tools/build_make.py ${{ matrix.family }} - name: Linker Map run: | diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml index c62056940..60c5feef3 100644 --- a/.github/workflows/build_msp430.yml +++ b/.github/workflows/build_msp430.yml @@ -71,7 +71,7 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_family.py ${{ matrix.family }} + run: python3 tools/build_make.py ${{ matrix.family }} - name: Linker Map run: | diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index 66b98a71b..1cc4f8132 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -71,7 +71,7 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_family.py ${{ matrix.family }} + run: python3 tools/build_make.py ${{ matrix.family }} - name: Linker Map run: | diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index 8ec549072..dfc6b672f 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -72,7 +72,7 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_family.py ${{ matrix.family }} + run: python3 tools/build_make.py ${{ matrix.family }} - name: Linker Map run: | diff --git a/.github/workflows/build_win_mac.yml b/.github/workflows/build_win_mac.yml index cb879a705..f6a42cf0a 100644 --- a/.github/workflows/build_win_mac.yml +++ b/.github/workflows/build_win_mac.yml @@ -51,4 +51,4 @@ jobs: run: python3 tools/get_deps.py stm32f4 - name: Build - run: python3 tools/build_family.py stm32f4 stm32f411disco + run: python3 tools/build_make.py stm32f4 stm32f411disco diff --git a/tools/build_family.py b/tools/build_make.py similarity index 100% rename from tools/build_family.py rename to tools/build_make.py From 1a98f5389c70d159f359c5bfe369d1cbf3af7475 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 12:07:59 +0700 Subject: [PATCH 78/82] correct gcc version major comparison --- examples/build_system/make/toolchain/arm_gcc.mk | 3 ++- hw/bsp/stm32f1/family.mk | 5 ++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/examples/build_system/make/toolchain/arm_gcc.mk b/examples/build_system/make/toolchain/arm_gcc.mk index 071b13f68..b87657f53 100644 --- a/examples/build_system/make/toolchain/arm_gcc.mk +++ b/examples/build_system/make/toolchain/arm_gcc.mk @@ -10,6 +10,7 @@ OBJCOPY = $(CROSS_COMPILE)objcopy SIZE = $(CROSS_COMPILE)size CC_VERSION := $(shell $(CC) -dumpversion) +CC_VERSION_MAJOR = $(firstword $(subst ., ,$(CC_VERSION))) # --------------------------------------- # Compiler Flags @@ -73,6 +74,6 @@ LDFLAGS += -Wl,--print-memory-usage endif # from version 12 -ifeq (12,$(firstword $(sort 12 $(CC_VERSION)))) +ifeq ($(shell expr $(CC_VERSION_MAJOR) \>= 12),1) LDFLAGS += -Wl,--no-warn-rwx-segment endif diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index c9321c3cb..d3627f47a 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -40,6 +40,5 @@ INC += \ SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s -# flash target ROM bootloader -flash-dfu-util: $(BUILD)/$(PROJECT).bin - dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< +# flash target ROM bootloader: flash-dfu-util +DFU_UTIL_OPTION = -a 0 --dfuse-address 0x08000000 From 82880eecbd51ce8cf801ae0c04871e65f81826f4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 12:43:13 +0700 Subject: [PATCH 79/82] make nanolib linking explicitly by each family/board --- examples/build_system/make/cpu/cortex-m23.mk | 14 + .../make/toolchain/arm_gcc_rules.mk | 4 - hw/bsp/ch32v307/family.mk | 2 + hw/bsp/da14695_dk_usb/board.mk | 4 +- hw/bsp/da1469x_dk_pro/board.mk | 4 +- hw/bsp/f1c100s/board.mk | 6 +- hw/bsp/fomu/family.mk | 6 +- hw/bsp/imxrt/family.mk | 4 +- hw/bsp/kinetis_k32l2/family.mk | 2 + hw/bsp/kinetis_kl/family.mk | 1 + hw/bsp/lpc11/family.mk | 2 + hw/bsp/lpc13/family.mk | 2 + hw/bsp/lpc15/family.mk | 2 + hw/bsp/lpc17/family.mk | 2 +- hw/bsp/lpc18/family.mk | 3 +- hw/bsp/lpc40/family.mk | 2 + hw/bsp/lpc43/family.mk | 2 + hw/bsp/lpc51/family.mk | 2 + hw/bsp/lpc54/family.mk | 3 +- hw/bsp/lpc55/family.mk | 3 +- hw/bsp/mcx/family.mk | 2 + hw/bsp/mm32/family.mk | 2 + hw/bsp/msp432e4/family.mk | 2 + hw/bsp/ngx4330/board.mk | 47 --- hw/bsp/ngx4330/ngx4330.c | 271 -------------- hw/bsp/ngx4330/ngx4330.ld | 343 ------------------ hw/bsp/nrf/family.mk | 11 +- hw/bsp/nutiny_nuc121s/board.mk | 2 + hw/bsp/nutiny_nuc125s/board.mk | 2 + hw/bsp/nutiny_nuc126v/board.mk | 2 + hw/bsp/nutiny_sdk_nuc120/board.mk | 2 + hw/bsp/nutiny_sdk_nuc505/board.mk | 2 + hw/bsp/ra/family.mk | 2 + hw/bsp/rx/family.mk | 2 + hw/bsp/samd11/family.mk | 2 + hw/bsp/samd21/family.mk | 2 + hw/bsp/samd51/family.mk | 2 + hw/bsp/same5x/family.mk | 2 + hw/bsp/same70_qmtech/board.mk | 3 +- hw/bsp/same70_xplained/board.mk | 3 +- hw/bsp/samg55xplained/board.mk | 3 +- hw/bsp/saml2x/family.mk | 2 + hw/bsp/sltb009a/board.mk | 2 + hw/bsp/spresense/board.mk | 2 + hw/bsp/stm32f0/family.mk | 2 + hw/bsp/stm32f1/family.mk | 2 + hw/bsp/stm32f2/family.mk | 2 + hw/bsp/stm32f3/family.mk | 2 + hw/bsp/stm32f4/family.mk | 2 + hw/bsp/stm32f7/family.mk | 2 + hw/bsp/stm32g0/family.mk | 2 + hw/bsp/stm32g4/family.mk | 2 + hw/bsp/stm32h7/family.mk | 2 + hw/bsp/stm32l0/family.mk | 2 + hw/bsp/stm32l4/family.mk | 2 + hw/bsp/stm32u5/family.mk | 2 + hw/bsp/stm32wb/family.mk | 2 + hw/bsp/tm4c123/family.mk | 3 +- 58 files changed, 130 insertions(+), 684 deletions(-) create mode 100644 examples/build_system/make/cpu/cortex-m23.mk delete mode 100644 hw/bsp/ngx4330/board.mk delete mode 100644 hw/bsp/ngx4330/ngx4330.c delete mode 100644 hw/bsp/ngx4330/ngx4330.ld diff --git a/examples/build_system/make/cpu/cortex-m23.mk b/examples/build_system/make/cpu/cortex-m23.mk new file mode 100644 index 000000000..29542d8e8 --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m23.mk @@ -0,0 +1,14 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m23 \ + -mfloat-abi=soft \ + +else ifeq ($(TOOLCHAIN),iar) + # IAR Flags + CFLAGS += --cpu cortex-m23 + ASFLAGS += --cpu cortex-m23 +endif + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM23 diff --git a/examples/build_system/make/toolchain/arm_gcc_rules.mk b/examples/build_system/make/toolchain/arm_gcc_rules.mk index b76d4aec3..d295879d9 100644 --- a/examples/build_system/make/toolchain/arm_gcc_rules.mk +++ b/examples/build_system/make/toolchain/arm_gcc_rules.mk @@ -31,10 +31,6 @@ ifdef LD_FILE_GCC LDFLAGS += -Wl,-T,$(TOP)/$(LD_FILE_GCC) endif -ifneq ($(SKIP_NANOLIB), 1) -LDFLAGS += --specs=nosys.specs --specs=nano.specs -endif - ASFLAGS += $(CFLAGS) LIBS_GCC ?= -lgcc -lm -lnosys diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 4b06cf429..fa64c1d7e 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -28,6 +28,8 @@ CFLAGS += \ -Xlinker --gc-sections \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/wch/ch32v307/dcd_usbhs.c \ $(CH32V307_SDK_SRC)/Core/core_riscv.c \ diff --git a/hw/bsp/da14695_dk_usb/board.mk b/hw/bsp/da14695_dk_usb/board.mk index 1f7bc1588..980b1a361 100644 --- a/hw/bsp/da14695_dk_usb/board.mk +++ b/hw/bsp/da14695_dk_usb/board.mk @@ -1,3 +1,5 @@ +MCU_FAMILY_DIR = hw/mcu/dialog/da1469x + CFLAGS += \ -flto \ -mthumb \ @@ -11,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ -DCFG_TUD_ENDPOINT0_SIZE=8\ -MCU_FAMILY_DIR = hw/mcu/dialog/da1469x +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/da1469x.ld diff --git a/hw/bsp/da1469x_dk_pro/board.mk b/hw/bsp/da1469x_dk_pro/board.mk index f9bf480de..5282f93a3 100644 --- a/hw/bsp/da1469x_dk_pro/board.mk +++ b/hw/bsp/da1469x_dk_pro/board.mk @@ -1,3 +1,5 @@ +MCU_FAMILY_DIR = hw/mcu/dialog/da1469x + CFLAGS += \ -flto \ -mthumb \ @@ -11,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ -DCFG_TUD_ENDPOINT0_SIZE=8\ -MCU_FAMILY_DIR = hw/mcu/dialog/da1469x +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/da1469x.ld diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk index 9062483b0..3596e5414 100644 --- a/hw/bsp/f1c100s/board.mk +++ b/hw/bsp/f1c100s/board.mk @@ -1,5 +1,5 @@ +MCU_DIR = hw/mcu/allwinner/f1c100s DEPS_SUBMODULES += hw/mcu/allwinner - DEFINES += -D__ARM32_ARCH__=5 -D__ARM926EJS__ CFLAGS += \ @@ -18,8 +18,8 @@ CFLAGS += \ $(DEFINES) LD_FILE = hw/mcu/allwinner/f1c100s/f1c100s.ld -LDFLAGS += -nostdlib -lgcc -MCU_DIR = hw/mcu/allwinner/f1c100s +# TODO may skip nanolib +LDFLAGS += -nostdlib -lgcc -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/sunxi/dcd_sunxi_musb.c \ diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index d0b819120..f8a3c9ebf 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,3 +1,6 @@ +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack +CROSS_COMPILE = riscv-none-embed- + CFLAGS += \ -flto \ -march=rv32i \ @@ -5,8 +8,7 @@ CFLAGS += \ -nostdlib \ -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE = riscv-none-embed- +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(FAMILY_PATH)/fomu.ld diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 90d566cfb..c6adcba5a 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -5,8 +5,8 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m7 - MCU_VARIANT_WITH_CORE = ${MCU_VARIANT}${MCU_CORE} +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) CFLAGS += \ -D__ARMVFP__=0 \ @@ -26,7 +26,7 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough -Wno-error=redundant-decls -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx${MCU_CORE}_flexspi_nor.ld diff --git a/hw/bsp/kinetis_k32l2/family.mk b/hw/bsp/kinetis_k32l2/family.mk index 357485762..0bfd57d29 100644 --- a/hw/bsp/kinetis_k32l2/family.mk +++ b/hw/bsp/kinetis_k32l2/family.mk @@ -9,6 +9,8 @@ CPU_CORE ?= cortex-m0plus CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32L +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/nxp/khci/dcd_khci.c \ src/portable/nxp/khci/hcd_khci.c \ diff --git a/hw/bsp/kinetis_kl/family.mk b/hw/bsp/kinetis_kl/family.mk index edb2f3366..e331d82b7 100644 --- a/hw/bsp/kinetis_kl/family.mk +++ b/hw/bsp/kinetis_kl/family.mk @@ -9,6 +9,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_KINETIS_KL \ LDFLAGS += \ + -specs=nosys.specs -specs=nano.specs \ -Wl,--defsym,__stack_size__=0x400 \ -Wl,--defsym,__heap_size__=0 diff --git a/hw/bsp/lpc11/family.mk b/hw/bsp/lpc11/family.mk index dee85da90..ce07ff450 100644 --- a/hw/bsp/lpc11/family.mk +++ b/hw/bsp/lpc11/family.mk @@ -11,6 +11,8 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ $(MCU_DIR)/../gcc/cr_startup_lpc$(MCU_DRV).c \ diff --git a/hw/bsp/lpc13/family.mk b/hw/bsp/lpc13/family.mk index 10cf4969d..6964dc48a 100644 --- a/hw/bsp/lpc13/family.mk +++ b/hw/bsp/lpc13/family.mk @@ -14,6 +14,8 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # startup.c and lpc_types.h cause following errors CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index 9f489832f..28ab1db7b 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -12,6 +12,8 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC15XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index 44b406d90..67d5e14b5 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -18,7 +18,7 @@ CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual # caused by freeRTOS port !! CFLAGS += -Wno-error=maybe-uninitialized -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index 9d0f85c20..c36c903ae 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen +MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m3 @@ -13,7 +14,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes -Wno-error=cast-qual -MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/chipidea/ci_hs/dcd_ci_hs.c \ diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index c11325890..fa76789e3 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -15,6 +15,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ diff --git a/hw/bsp/lpc43/family.mk b/hw/bsp/lpc43/family.mk index 55d86e955..f24385139 100644 --- a/hw/bsp/lpc43/family.mk +++ b/hw/bsp/lpc43/family.mk @@ -18,6 +18,8 @@ CFLAGS += \ -Wno-error=cast-qual \ -Wno-error=incompatible-pointer-types \ +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/chipidea/ci_hs/dcd_ci_hs.c \ src/portable/chipidea/ci_hs/hcd_ci_hs.c \ diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk index df5a9958e..c8ee29dbc 100644 --- a/hw/bsp/lpc51/family.mk +++ b/hw/bsp/lpc51/family.mk @@ -13,6 +13,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/$(MCU)_flash.ld diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 46a5f7930..9b5eac18d 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -3,6 +3,7 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) CFLAGS += \ -flto \ @@ -22,7 +23,7 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index a87fa5acf..1b97c43e4 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -4,6 +4,7 @@ DEPS_SUBMODULES += lib/CMSIS_5 lib/sct_neopixel $(SDK_DIR) include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m33 +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) # Default to Highspeed PORT1 PORT ?= 1 @@ -27,7 +28,7 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_CORE)_flash.ld diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index e384aa8eb..526effdfb 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -17,6 +17,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk index d5b6e315a..3981e4e41 100644 --- a/hw/bsp/mm32/family.mk +++ b/hw/bsp/mm32/family.mk @@ -13,6 +13,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized -Wno-error=cast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c \ $(SDK_DIR)/mm32f327x/MM32F327x/Source/system_mm32f327x.c \ diff --git a/hw/bsp/msp432e4/family.mk b/hw/bsp/msp432e4/family.mk index b5ade6a52..6fcb22457 100644 --- a/hw/bsp/msp432e4/family.mk +++ b/hw/bsp/msp432e4/family.mk @@ -12,6 +12,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=cast-qual -Wno-error=format= +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/mcu/ti/msp432e4/Source/msp432e401y.ld LDINC += $(TOP)/hw/mcu/ti/msp432e4/Include diff --git a/hw/bsp/ngx4330/board.mk b/hw/bsp/ngx4330/board.mk deleted file mode 100644 index 99c1f194c..000000000 --- a/hw/bsp/ngx4330/board.mk +++ /dev/null @@ -1,47 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC43XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/ngx4330.ld - -SRC_C += \ - src/portable/chipidea/ci_hs/dcd_ci_hs.c \ - src/portable/chipidea/ci_hs/hcd_ci_hs.c \ - src/portable/ehci/ehci.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_43xx - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4330 -JLINK_IF = swd - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c deleted file mode 100644 index bd84e449b..000000000 --- a/hw/bsp/ngx4330/ngx4330.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board_api.h" - -#define LED_PORT 1 -#define LED_PIN 12 -#define LED_STATE_ON 0 - -#define BUTTON_PORT 0 -#define BUTTON_PIN 7 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_USART0 -#define BOARD_UART_PIN_PORT 0x0f -#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD -#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD - -#ifdef BOARD_TUD_RHPORT - #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) -#else - #define PORT_SUPPORT_DEVICE(_n) 0 -#endif - -#ifdef BOARD_TUH_RHPORT - #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) -#else - #define PORT_SUPPORT_HOST(_n) 0 -#endif - -/*------------------------------------------------------------------*/ -/* BOARD API - *------------------------------------------------------------------*/ - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // LED P2.12 as GPIO 1.12 - {2, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_PULLDOWN | SCU_MODE_FUNC0)}, - - // Button P2.7 as GPIO 0.7 - {2, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, - - // USB - {2, 6, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB1_PWR_EN - {2, 5, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, // USB1_VBUS - {1, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB0_PWRN_EN - - // SPIFI - {3, 3, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI CLK */ - {3, 4, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D3 */ - {3, 5, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D2 */ - {3, 6, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D1 */ - {3, 7, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D0 */ - {3, 8, (SCU_PINIO_FAST | SCU_MODE_FUNC3)} /* SPIFI CS/SSEL */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - // Set up pinmux - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - //------------- Set up clock -------------// - Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IRC, true, false); // change SPIFI to IRC during clock programming - LPC_SPIFI->CTRL |= SPIFI_CTRL_FBCLK(1); // and set FBCLK in SPIFI controller - - Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true); - - /* Reset and enable 32Khz oscillator */ - LPC_CREG->CREG0 &= ~((1 << 3) | (1 << 2)); - LPC_CREG->CREG0 |= (1 << 1) | (1 << 0); - - /* Setup a divider E for main PLL clock switch SPIFI clock to that divider. - Divide rate is based on CPU speed and speed of SPI FLASH part. */ -#if (MAX_CLOCK_FREQ > 180000000) - Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 5); -#else - Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 4); -#endif - Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IDIVE, true, false); - - /* Setup system base clocks and initial states. This won't enable and - disable individual clocks, but sets up the base clock sources for - each individual peripheral clock. */ - Chip_Clock_SetBaseClock(CLK_BASE_USB1, CLKIN_IDIVD, true, true); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1); - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - UARTConfigStruct.Clock_Speed = 0; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - enum { - USBMODE_DEVICE = 2, - USBMODE_HOST = 3 - }; - - enum { - USBMODE_VBUS_LOW = 0, - USBMODE_VBUS_HIGH = 1 - }; - - /* USB0 - * For USB Device operation; insert jumpers in position 1-2 in JP17/JP18/JP19. GPIO28 controls USB - * connect functionality and LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted - * by default. LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS - * sensing. - * For USB Host operation; insert jumpers in position 2-3 in JP17/JP18/JP19. USB Host power is - * controlled via distribution switch U20 (found in schematic page 11). Signal GPIO26 is active low and - * enables +5V on VBUS2. LED35 light whenever +5V is present on VBUS2. GPIO55 is connected to - * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down - * resistors are always active - */ - Chip_USB0_Init(); - - /* USB1 - * When USB channel #1 is used as USB Host, 15Kohm pull-down resistors are needed on the USB data - * signals. These are activated inside the USB OTG chip (U31), and this has to be done via the I2C - * interface of GPIO52/GPIO53. - * J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB - * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default - * since SJ5 is normally connected between pin 1-2. LED34 lights green when +5V is available on J20. - * JP15 shall not be inserted. JP16 has no effect - * - * When USB channel #1 is used as USB Device, a 1.5Kohm pull-up resistor is needed on the USB DP - * data signal. There are two methods to create this. JP15 is inserted and the pull-up resistor is always - * enabled. Alternatively, the pull-up resistor is activated inside the USB OTG chip (U31), and this has to - * be done via the I2C interface of GPIO52/GPIO53. In the latter case, JP15 shall not be inserted. - * J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for - * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status - * of VBUS can be read via U31. - * JP16 shall not be inserted. - */ - Chip_USB1_Init(); -// Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */ -// Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */ -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); - #endif - - #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0, true); - #endif -} - -void USB1_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); - #endif - - #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1, true); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/ngx4330/ngx4330.ld b/hw/bsp/ngx4330/ngx4330.ld deleted file mode 100644 index 300869c20..000000000 --- a/hw/bsp/ngx4330/ngx4330.ld +++ /dev/null @@ -1,343 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC4330 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 9, 2019 12:09:49 PM - */ - -MEMORY -{ - /* Define each memory region */ - RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ - RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ - SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ -} - - /* Define a symbol for the top of each memory region */ - __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ - __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ - __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __base_SPIFI = 0x14000000 ; /* SPIFI */ - __base_Flash = 0x14000000 ; /* Flash */ - __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ - __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > SPIFI - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > SPIFI - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > SPIFI - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > SPIFI - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc72 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc72) - *(.data.$RAM2) - *(.data.$RamLoc72) - *(.data.$RAM2.*) - *(.data.$RamLoc72.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc72 AT>SPIFI - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3) - *(.data.$RamAHB32) - *(.data.$RAM3.*) - *(.data.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>SPIFI - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4) - *(.data.$RamAHB16) - *(.data.$RAM4.*) - *(.data.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>SPIFI - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5) - *(.data.$RamAHB_ETB16) - *(.data.$RAM5.*) - *(.data.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>SPIFI - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : - { - . = ALIGN(4) ; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc128 - - /* Main DATA section (RamLoc128) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc128 AT>SPIFI - - /* BSS section for RamLoc72 */ - .bss_RAM2 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2) - *(.bss.$RamLoc72) - *(.bss.$RAM2.*) - *(.bss.$RamLoc72.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc72 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3) - *(.bss.$RamAHB32) - *(.bss.$RAM3.*) - *(.bss.$RamAHB32.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4) - *(.bss.$RamAHB16) - *(.bss.$RAM4.*) - *(.bss.$RamAHB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5) - *(.bss.$RamAHB_ETB16) - *(.bss.$RAM5.*) - *(.bss.$RamAHB_ETB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : - { - . = ALIGN(4) ; - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc128 - - /* NOINIT section for RamLoc72 */ - .noinit_RAM2 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM2) - *(.noinit.$RamLoc72) - *(.noinit.$RAM2.*) - *(.noinit.$RamLoc72.*) - . = ALIGN(4) ; - } > RamLoc72 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM3) - *(.noinit.$RamAHB32) - *(.noinit.$RAM3.*) - *(.noinit.$RamAHB32.*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM4) - *(.noinit.$RamAHB16) - *(.noinit.$RAM4.*) - *(.noinit.$RamAHB16.*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM5) - *(.noinit.$RamAHB_ETB16) - *(.noinit.$RAM5.*) - *(.noinit.$RamAHB_ETB16.*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): - { - . = ALIGN(4) ; - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc128 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index 4b53b9a4f..df22477df 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -13,9 +13,16 @@ CFLAGS += \ -DCONFIG_GPIO_AS_PINRESET # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS += \ + -Wno-error=undef \ + -Wno-error=unused-parameter \ + -Wno-error=cast-align \ + -Wno-error=cast-qual \ + -Wno-error=redundant-decls -LDFLAGS += -L$(TOP)/${NRFX_DIR}/mdk +LDFLAGS += \ + -specs=nosys.specs -specs=nano.specs \ + -L$(TOP)/${NRFX_DIR}/mdk SRC_C += \ src/portable/nordic/nrf5x/dcd_nrf5x.c \ diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk index aa8f00e70..161ff9041 100644 --- a/hw/bsp/nutiny_nuc121s/board.mk +++ b/hw/bsp/nutiny_nuc121s/board.mk @@ -13,6 +13,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc121_flash.ld diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk index bf7610a7b..081764fd3 100644 --- a/hw/bsp/nutiny_nuc125s/board.mk +++ b/hw/bsp/nutiny_nuc125s/board.mk @@ -13,6 +13,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc125_flash.ld diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk index 46f53420c..2466b3a31 100644 --- a/hw/bsp/nutiny_nuc126v/board.mk +++ b/hw/bsp/nutiny_nuc126v/board.mk @@ -14,6 +14,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld diff --git a/hw/bsp/nutiny_sdk_nuc120/board.mk b/hw/bsp/nutiny_sdk_nuc120/board.mk index b1f9245a6..b54895b58 100644 --- a/hw/bsp/nutiny_sdk_nuc120/board.mk +++ b/hw/bsp/nutiny_sdk_nuc120/board.mk @@ -9,6 +9,8 @@ CFLAGS += \ -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_NUC120 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk index 3e48d3998..f3b389354 100644 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ b/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -12,6 +12,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 9afb38e06..4447e8499 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -31,6 +31,8 @@ else $(info "Using PORT 0 FullSpeed") endif +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ diff --git a/hw/bsp/rx/family.mk b/hw/bsp/rx/family.mk index 3044167b9..02ea0dfa4 100644 --- a/hw/bsp/rx/family.mk +++ b/hw/bsp/rx/family.mk @@ -16,6 +16,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index 43a60a122..38430f017 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -18,6 +18,8 @@ CFLAGS += -Wno-error=redundant-decls # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ hw/mcu/microchip/samd11/gcc/gcc/startup_samd11.c \ diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 79c63812d..3302aade5 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -16,6 +16,8 @@ CFLAGS += -Wno-error=redundant-decls # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ ${SDK_DIR}/gcc/gcc/startup_samd21.c \ diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index 9a6c67e1a..94ca68705 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -12,6 +12,8 @@ CFLAGS += \ # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ hw/mcu/microchip/samd51/gcc/gcc/startup_samd51.c \ diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk index 691863f11..b2bf0d359 100644 --- a/hw/bsp/same5x/family.mk +++ b/hw/bsp/same5x/family.mk @@ -13,6 +13,8 @@ CFLAGS += \ # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ $(SDK_DIR)/gcc/gcc/startup_$(MCU).c \ diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk index ad5af2020..281a947f3 100644 --- a/hw/bsp/same70_qmtech/board.mk +++ b/hw/bsp/same70_qmtech/board.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/microchip +ASF_DIR = hw/mcu/microchip/same70 CFLAGS += \ -mthumb \ @@ -16,7 +17,7 @@ CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual -ASF_DIR = hw/mcu/microchip/same70 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk index 769d03e21..3edc128a5 100644 --- a/hw/bsp/same70_xplained/board.mk +++ b/hw/bsp/same70_xplained/board.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/microchip +ASF_DIR = hw/mcu/microchip/same70 CFLAGS += \ -mthumb \ @@ -16,7 +17,7 @@ CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual -ASF_DIR = hw/mcu/microchip/same70 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk index ed0d59772..a9328be11 100644 --- a/hw/bsp/samg55xplained/board.mk +++ b/hw/bsp/samg55xplained/board.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/microchip +ASF_DIR = hw/mcu/microchip/samg55 CFLAGS += \ -flto \ @@ -17,7 +18,7 @@ CFLAGS += -Wno-error=undef -Wno-error=null-dereference -Wno-error=redundant-decl # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual -ASF_DIR = hw/mcu/microchip/samg55 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/samg55j19_flash.ld diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index 0acb0ed14..59dbc9a25 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -16,6 +16,8 @@ CFLAGS += -Wno-error=redundant-decls # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ $(MCU_DIR)/gcc/gcc/startup_$(SAML_VARIANT).c \ diff --git a/hw/bsp/sltb009a/board.mk b/hw/bsp/sltb009a/board.mk index f9c1dd4db..a04bc19d8 100644 --- a/hw/bsp/sltb009a/board.mk +++ b/hw/bsp/sltb009a/board.mk @@ -19,6 +19,8 @@ SILABS_CMSIS = hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY)/Device/SiliconLabs/$(she DEPS_SUBMODULES += hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY) DEPS_SUBMODULES += lib/CMSIS_5 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(SILABS_FAMILY).ld diff --git a/hw/bsp/spresense/board.mk b/hw/bsp/spresense/board.mk index 78d7f6a66..15fa0ff20 100644 --- a/hw/bsp/spresense/board.mk +++ b/hw/bsp/spresense/board.mk @@ -38,6 +38,8 @@ CFLAGS += \ # lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration CFLAGS += -Wno-error=shadow -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk SRC_C += src/portable/sony/cxd56/dcd_cxd56.c diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk index 129a3b73a..537df4d7b 100644 --- a/hw/bsp/stm32f0/family.mk +++ b/hw/bsp/stm32f0/family.mk @@ -23,6 +23,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ------------------------ # All source paths should be relative to the top level. # ------------------------ diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index d3627f47a..90a984bfe 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -18,6 +18,8 @@ CFLAGS_GCC += \ -flto \ -nostdlib -nostartfiles \ +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ------------------------ # All source paths should be relative to the top level. # ------------------------ diff --git a/hw/bsp/stm32f2/family.mk b/hw/bsp/stm32f2/family.mk index ce50b16ad..c6ef1ec1d 100644 --- a/hw/bsp/stm32f2/family.mk +++ b/hw/bsp/stm32f2/family.mk @@ -21,6 +21,8 @@ CFLAGS_GCC += \ # mcu driver cause following warnings CFLAGS_GCC += -Wno-error=sign-compare +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk index a740e9012..be8271d96 100644 --- a/hw/bsp/stm32f3/family.mk +++ b/hw/bsp/stm32f3/family.mk @@ -19,6 +19,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 0f4c792ab..ecbbff417 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -25,6 +25,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 7f37a7e40..1cdf23c6b 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -35,6 +35,8 @@ CFLAGS_GCC += \ # mcu driver cause following warnings CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32g0/family.mk b/hw/bsp/stm32g0/family.mk index 6b199f21a..fb382b56a 100644 --- a/hw/bsp/stm32g0/family.mk +++ b/hw/bsp/stm32g0/family.mk @@ -21,6 +21,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk index 2efe91449..4b0c6922d 100644 --- a/hw/bsp/stm32g4/family.mk +++ b/hw/bsp/stm32g4/family.mk @@ -22,6 +22,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index a1ff26d0b..0777bb9c2 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -35,6 +35,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index 43f567b50..a811e1823 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -24,6 +24,8 @@ CFLAGS += \ -Wno-error=cast-align \ -Wno-error=maybe-uninitialized +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index c16040887..956f82263 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -21,6 +21,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=maybe-uninitialized -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index c3e66c5a5..2144ef37b 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -15,6 +15,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=undef -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index bc3afcaff..287b58ce5 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -16,6 +16,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=cast-align -Wno-unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk index 608c530bb..49e39f6a0 100644 --- a/hw/bsp/tm4c123/family.mk +++ b/hw/bsp/tm4c123/family.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/ti +MCU_DIR=hw/mcu/ti/tm4c123xx include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 @@ -12,7 +13,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual -MCU_DIR=hw/mcu/ti/tm4c123xx/ +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/tm4c123.ld From 54356a719e3968702d86346ec6305679ebd9dd0f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 17:53:17 +0700 Subject: [PATCH 80/82] minor-update --- hw/bsp/board.c | 20 ++++++--- hw/bsp/family_support.cmake | 5 ++- hw/bsp/nrf/family.cmake | 4 +- hw/bsp/nrf/family.mk | 3 ++ hw/bsp/stm32h7/family.cmake | 4 +- src/osal/osal_none.h | 64 +++++++++++------------------ tools/cmake/toolchain/arm_gcc.cmake | 2 +- 7 files changed, 47 insertions(+), 55 deletions(-) diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 562792625..23b4b6628 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -44,13 +44,12 @@ // If using SES IDE, use the Syscalls/SEGGER_RTT_Syscalls_SES.c instead #if !(defined __SES_ARM) && !(defined __SES_RISCV) && !(defined __CROSSWORKS_ARM) - #include "SEGGER_RTT.h" -TU_ATTR_USED int sys_write(int fhdl, const void *buf, size_t count) { +TU_ATTR_USED int sys_write(int fhdl, const char *buf, size_t count) { (void) fhdl; SEGGER_RTT_Write(0, (const char *) buf, (int) count); - return count; + return (int) count; } TU_ATTR_USED int sys_read(int fhdl, char *buf, size_t count) { @@ -63,10 +62,9 @@ TU_ATTR_USED int sys_read(int fhdl, char *buf, size_t count) { #elif defined(LOGGER_SWO) // Logging with SWO for ARM Cortex - #include "board_mcu.h" -TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) { +TU_ATTR_USED int sys_write (int fhdl, const char *buf, size_t count) { (void) fhdl; uint8_t const* buf8 = (uint8_t const*) buf; @@ -87,7 +85,7 @@ TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) { #else // Default logging with on-board UART -TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) { +TU_ATTR_USED int sys_write (int fhdl, const char *buf, size_t count) { (void) fhdl; return board_uart_write(buf, (int) count); } @@ -100,6 +98,16 @@ TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) { #endif +//TU_ATTR_USED int _close(int fhdl) { +// (void) fhdl; +// return 0; +//} + +//TU_ATTR_USED int _fstat(int file, struct stat *st) { +// memset(st, 0, sizeof(*st)); +// st->st_mode = S_IFCHR; +//} + int board_getchar(void) { char c; return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index eec42160e..930237fea 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -201,6 +201,9 @@ function(family_configure_common TARGET RTOS) # Generate linker map file if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0) + target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") + endif () endif() # ETM Trace option @@ -289,13 +292,11 @@ function(family_configure_device_example TARGET RTOS) family_configure_example(${TARGET} ${RTOS}) endfunction() - # Configure host example with RTOS function(family_configure_host_example TARGET RTOS) family_configure_example(${TARGET} ${RTOS}) endfunction() - # Configure host + device example with RTOS function(family_configure_dual_usb_example TARGET RTOS) family_configure_example(${TARGET} ${RTOS}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 99d9ac6dd..8cee2b433 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -84,9 +84,7 @@ function(add_board_target BOARD_TARGET) # linker file "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index df22477df..29802dc37 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -12,6 +12,9 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ -DCONFIG_GPIO_AS_PINRESET +#CFLAGS += -nostdlib +#CFLAGS += -D__START=main + # suppress warning caused by vendor mcu driver CFLAGS += \ -Wno-error=undef \ diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index c08857a50..2d6ec76c8 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -66,9 +66,7 @@ function(add_board_target BOARD_TARGET) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 76e77c25d..a07d39828 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -24,11 +24,11 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_OSAL_NONE_H_ -#define _TUSB_OSAL_NONE_H_ +#ifndef TUSB_OSAL_NONE_H_ +#define TUSB_OSAL_NONE_H_ #ifdef __cplusplus - extern "C" { +extern "C" { #endif //--------------------------------------------------------------------+ @@ -43,39 +43,34 @@ TU_ATTR_WEAK void osal_task_delay(uint32_t msec); //--------------------------------------------------------------------+ // Binary Semaphore API //--------------------------------------------------------------------+ -typedef struct -{ +typedef struct { volatile uint16_t count; -}osal_semaphore_def_t; +} osal_semaphore_def_t; typedef osal_semaphore_def_t* osal_semaphore_t; -TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef) { semdef->count = 0; return semdef; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { (void) in_isr; sem_hdl->count++; return true; } // TODO blocking for now -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait (osal_semaphore_t sem_hdl, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { (void) msec; - while (sem_hdl->count == 0) { } + while (sem_hdl->count == 0) {} sem_hdl->count--; return true; } -TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl) -{ +TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl) { sem_hdl->count = 0; } @@ -90,19 +85,16 @@ typedef osal_semaphore_t osal_mutex_t; // Note: multiple cores MCUs usually do provide IPC API for mutex // or we can use std atomic function -TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef) { mdef->count = 1; return mdef; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock (osal_mutex_t mutex_hdl, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock (osal_mutex_t mutex_hdl, uint32_t msec) { return osal_semaphore_wait(mutex_hdl, msec); } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) { return osal_semaphore_post(mutex_hdl, false); } @@ -119,11 +111,10 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd //--------------------------------------------------------------------+ #include "common/tusb_fifo.h" -typedef struct -{ - void (*interrupt_set)(bool); +typedef struct { + void (* interrupt_set)(bool); tu_fifo_t ff; -}osal_queue_def_t; +} osal_queue_def_t; typedef osal_queue_def_t* osal_queue_t; @@ -136,27 +127,23 @@ typedef osal_queue_def_t* osal_queue_t; } // lock queue by disable USB interrupt -TU_ATTR_ALWAYS_INLINE static inline void _osal_q_lock(osal_queue_t qhdl) -{ +TU_ATTR_ALWAYS_INLINE static inline void _osal_q_lock(osal_queue_t qhdl) { // disable dcd/hcd interrupt qhdl->interrupt_set(false); } // unlock queue -TU_ATTR_ALWAYS_INLINE static inline void _osal_q_unlock(osal_queue_t qhdl) -{ +TU_ATTR_ALWAYS_INLINE static inline void _osal_q_unlock(osal_queue_t qhdl) { // enable dcd/hcd interrupt qhdl->interrupt_set(true); } -TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) { (void) msec; // not used, always behave as msec = 0 _osal_q_lock(qhdl); @@ -166,8 +153,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, v return success; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const* data, bool in_isr) { if (!in_isr) { _osal_q_lock(qhdl); } @@ -179,19 +165,17 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void } TU_ASSERT(success); - return success; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) { // Skip queue lock/unlock since this function is primarily called // with interrupt disabled before going into low power mode return tu_fifo_empty(&qhdl->ff); } #ifdef __cplusplus - } +} #endif -#endif /* _TUSB_OSAL_NONE_H_ */ +#endif diff --git a/tools/cmake/toolchain/arm_gcc.cmake b/tools/cmake/toolchain/arm_gcc.cmake index cefa9d2ce..7680d75ab 100644 --- a/tools/cmake/toolchain/arm_gcc.cmake +++ b/tools/cmake/toolchain/arm_gcc.cmake @@ -29,7 +29,7 @@ list(APPEND TOOLCHAIN_COMMON_FLAGS -fno-strict-aliasing ) -set(TOOLCHAIN_EXE_LINKER_FLAGS +list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS -Wl,--print-memory-usage -Wl,--gc-sections -Wl,--cref From 7213b8abb126cb6a1c88bd1e6d89b7dbacf339d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 20:06:22 +0700 Subject: [PATCH 81/82] move tools/cmake to examples/build_system --- {tools => examples/build_system}/cmake/cpu/cortex-m0.cmake | 0 {tools => examples/build_system}/cmake/cpu/cortex-m0plus.cmake | 0 {tools => examples/build_system}/cmake/cpu/cortex-m23.cmake | 0 {tools => examples/build_system}/cmake/cpu/cortex-m3.cmake | 0 {tools => examples/build_system}/cmake/cpu/cortex-m33.cmake | 0 {tools => examples/build_system}/cmake/cpu/cortex-m4.cmake | 0 {tools => examples/build_system}/cmake/cpu/cortex-m7.cmake | 0 {tools => examples/build_system}/cmake/toolchain/arm_gcc.cmake | 0 {tools => examples/build_system}/cmake/toolchain/arm_iar.cmake | 0 .../build_system}/cmake/toolchain/set_flags.cmake | 0 hw/bsp/imxrt/family.cmake | 2 +- hw/bsp/kinetis_kl/family.cmake | 2 +- hw/bsp/lpc18/family.cmake | 2 +- hw/bsp/lpc40/family.cmake | 2 +- hw/bsp/lpc43/family.cmake | 2 +- hw/bsp/lpc54/family.cmake | 2 +- hw/bsp/lpc55/family.cmake | 2 +- hw/bsp/mcx/family.cmake | 2 +- hw/bsp/nrf/family.cmake | 2 +- hw/bsp/ra/family.cmake | 2 +- hw/bsp/samd21/family.cmake | 2 +- hw/bsp/samd51/family.cmake | 2 +- hw/bsp/stm32f0/family.cmake | 2 +- hw/bsp/stm32f1/family.cmake | 2 +- hw/bsp/stm32f4/family.cmake | 2 +- hw/bsp/stm32f7/family.cmake | 2 +- hw/bsp/stm32g0/family.cmake | 2 +- hw/bsp/stm32g4/family.cmake | 2 +- hw/bsp/stm32h7/family.cmake | 2 +- hw/bsp/stm32l4/family.cmake | 2 +- hw/bsp/stm32u5/family.cmake | 2 +- 31 files changed, 21 insertions(+), 21 deletions(-) rename {tools => examples/build_system}/cmake/cpu/cortex-m0.cmake (100%) rename {tools => examples/build_system}/cmake/cpu/cortex-m0plus.cmake (100%) rename {tools => examples/build_system}/cmake/cpu/cortex-m23.cmake (100%) rename {tools => examples/build_system}/cmake/cpu/cortex-m3.cmake (100%) rename {tools => examples/build_system}/cmake/cpu/cortex-m33.cmake (100%) rename {tools => examples/build_system}/cmake/cpu/cortex-m4.cmake (100%) rename {tools => examples/build_system}/cmake/cpu/cortex-m7.cmake (100%) rename {tools => examples/build_system}/cmake/toolchain/arm_gcc.cmake (100%) rename {tools => examples/build_system}/cmake/toolchain/arm_iar.cmake (100%) rename {tools => examples/build_system}/cmake/toolchain/set_flags.cmake (100%) diff --git a/tools/cmake/cpu/cortex-m0.cmake b/examples/build_system/cmake/cpu/cortex-m0.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m0.cmake rename to examples/build_system/cmake/cpu/cortex-m0.cmake diff --git a/tools/cmake/cpu/cortex-m0plus.cmake b/examples/build_system/cmake/cpu/cortex-m0plus.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m0plus.cmake rename to examples/build_system/cmake/cpu/cortex-m0plus.cmake diff --git a/tools/cmake/cpu/cortex-m23.cmake b/examples/build_system/cmake/cpu/cortex-m23.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m23.cmake rename to examples/build_system/cmake/cpu/cortex-m23.cmake diff --git a/tools/cmake/cpu/cortex-m3.cmake b/examples/build_system/cmake/cpu/cortex-m3.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m3.cmake rename to examples/build_system/cmake/cpu/cortex-m3.cmake diff --git a/tools/cmake/cpu/cortex-m33.cmake b/examples/build_system/cmake/cpu/cortex-m33.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m33.cmake rename to examples/build_system/cmake/cpu/cortex-m33.cmake diff --git a/tools/cmake/cpu/cortex-m4.cmake b/examples/build_system/cmake/cpu/cortex-m4.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m4.cmake rename to examples/build_system/cmake/cpu/cortex-m4.cmake diff --git a/tools/cmake/cpu/cortex-m7.cmake b/examples/build_system/cmake/cpu/cortex-m7.cmake similarity index 100% rename from tools/cmake/cpu/cortex-m7.cmake rename to examples/build_system/cmake/cpu/cortex-m7.cmake diff --git a/tools/cmake/toolchain/arm_gcc.cmake b/examples/build_system/cmake/toolchain/arm_gcc.cmake similarity index 100% rename from tools/cmake/toolchain/arm_gcc.cmake rename to examples/build_system/cmake/toolchain/arm_gcc.cmake diff --git a/tools/cmake/toolchain/arm_iar.cmake b/examples/build_system/cmake/toolchain/arm_iar.cmake similarity index 100% rename from tools/cmake/toolchain/arm_iar.cmake rename to examples/build_system/cmake/toolchain/arm_iar.cmake diff --git a/tools/cmake/toolchain/set_flags.cmake b/examples/build_system/cmake/toolchain/set_flags.cmake similarity index 100% rename from tools/cmake/toolchain/set_flags.cmake rename to examples/build_system/cmake/toolchain/set_flags.cmake diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index ecde39611..090014754 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -13,7 +13,7 @@ set(MCU_VARIANT_WITH_CORE ${MCU_VARIANT}${MCU_CORE}) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "") diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 4151979a0..6d9b65df0 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 74a794bde..78f4c510b 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -11,7 +11,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 56eb37a2f..fce9772b6 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 608fc4ca3..f66da98aa 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC43XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index cdd513fe4..287b437fb 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC54 CACHE INTERNAL "") diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index dce197b2d..75dabfe5a 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC55 CACHE INTERNAL "") diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index b3a4a846e..13d1d44ef 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 8cee2b433..2c4620b97 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -19,7 +19,7 @@ else () set(JLINK_DEVICE ${MCU_VARIANT}_xxaa) endif () -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS NRF5X CACHE INTERNAL "") diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 11bc7c668..426e1ca8f 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -11,7 +11,7 @@ set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) #set(FREERTOS_PORT A_CUSTOM_PORT CACHE INTERNAL "") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "") diff --git a/hw/bsp/samd21/family.cmake b/hw/bsp/samd21/family.cmake index 07186934a..44aad6ecb 100644 --- a/hw/bsp/samd21/family.cmake +++ b/hw/bsp/samd21/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD21 CACHE INTERNAL "") diff --git a/hw/bsp/samd51/family.cmake b/hw/bsp/samd51/family.cmake index fa9586066..7591f3b1b 100644 --- a/hw/bsp/samd51/family.cmake +++ b/hw/bsp/samd51/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD51 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index e0fc705f8..89c93c47a 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 53af35862..6657c85ce 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F1 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index cad504bac..71ec33c6e 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 48dd9c7ca..5b3bdf17e 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F7 CACHE INTERNAL "") diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index cf52a6324..0a9779022 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index eee6bd9ed..15a834a00 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 2d6ec76c8..6174dfda3 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 87f87004b..9b06a64d4 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32L4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 2e4ed7d50..cde1df5ca 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32U5 CACHE INTERNAL "") From 26ca48e7a7a93f8b7f13a209745080855a7bc4fe Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 20:19:14 +0700 Subject: [PATCH 82/82] move make.mk and rules.mk to build_system/make --- .idea/cmake.xml | 2 +- examples/{ => build_system/make}/make.mk | 4 ++-- examples/{ => build_system/make}/rules.mk | 0 examples/device/audio_4_channel_mic/Makefile | 4 ++-- examples/device/audio_test/Makefile | 4 ++-- examples/device/audio_test_multi_rate/Makefile | 4 ++-- examples/device/board_test/Makefile | 4 ++-- examples/device/cdc_dual_ports/Makefile | 4 ++-- examples/device/cdc_msc/Makefile | 4 ++-- examples/device/cdc_msc_freertos/Makefile | 4 ++-- examples/device/cdc_uac2/Makefile | 4 ++-- examples/device/dfu/Makefile | 4 ++-- examples/device/dfu_runtime/Makefile | 4 ++-- examples/device/dynamic_configuration/Makefile | 4 ++-- examples/device/hid_boot_interface/Makefile | 4 ++-- examples/device/hid_composite/Makefile | 4 ++-- examples/device/hid_composite_freertos/Makefile | 4 ++-- examples/device/hid_generic_inout/Makefile | 4 ++-- examples/device/hid_multiple_interface/Makefile | 4 ++-- examples/device/midi_test/Makefile | 4 ++-- examples/device/msc_dual_lun/Makefile | 4 ++-- examples/device/net_lwip_webserver/Makefile | 4 ++-- examples/device/uac2_headset/Makefile | 4 ++-- examples/device/usbtmc/Makefile | 4 ++-- examples/device/video_capture/Makefile | 4 ++-- examples/device/webusb_serial/Makefile | 4 ++-- examples/dual/host_hid_to_device_cdc/Makefile | 4 ++-- examples/host/bare_api/Makefile | 4 ++-- examples/host/cdc_msc_hid/Makefile | 4 ++-- examples/host/cdc_msc_hid_freertos/Makefile | 4 ++-- examples/host/hid_controller/Makefile | 4 ++-- examples/host/msc_file_explorer/Makefile | 4 ++-- examples/typec/power_delivery/Makefile | 4 ++-- tools/build_make.py | 4 ++-- 34 files changed, 65 insertions(+), 65 deletions(-) rename examples/{ => build_system/make}/make.mk (96%) rename examples/{ => build_system/make}/rules.mk (100%) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 97e503033..101f08078 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -63,7 +63,7 @@ - + diff --git a/examples/make.mk b/examples/build_system/make/make.mk similarity index 96% rename from examples/make.mk rename to examples/build_system/make/make.mk index b646b46ce..e1113aa52 100644 --- a/examples/make.mk +++ b/examples/build_system/make/make.mk @@ -8,9 +8,9 @@ # $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) -# strip off /tools/top.mk to get for example ../../.. +# strip off /examples/build_system/make to get for example ../../.. # and Set TOP to an absolute path -TOP = $(abspath $(subst make.mk,..,$(THIS_MAKEFILE))) +TOP = $(abspath $(subst make.mk,../../..,$(THIS_MAKEFILE))) # Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) diff --git a/examples/rules.mk b/examples/build_system/make/rules.mk similarity index 100% rename from examples/rules.mk rename to examples/build_system/make/rules.mk diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 8ee6a01ec..2c825bbf7 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/audio_test/Makefile b/examples/device/audio_test/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/audio_test/Makefile +++ b/examples/device/audio_test/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/audio_test_multi_rate/Makefile +++ b/examples/device/audio_test_multi_rate/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/board_test/Makefile b/examples/device/board_test/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/board_test/Makefile +++ b/examples/device/board_test/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_dual_ports/Makefile b/examples/device/cdc_dual_ports/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/cdc_dual_ports/Makefile +++ b/examples/device/cdc_dual_ports/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_msc/Makefile b/examples/device/cdc_msc/Makefile index 429959e70..0c2e37180 100644 --- a/examples/device/cdc_msc/Makefile +++ b/examples/device/cdc_msc/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -12,4 +12,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 84c833fb5..13f336f99 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) @@ -43,4 +43,4 @@ CFLAGS_GCC += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_uac2/Makefile b/examples/device/cdc_uac2/Makefile index b7a8302ce..21dcdb0b2 100644 --- a/examples/device/cdc_uac2/Makefile +++ b/examples/device/cdc_uac2/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -13,4 +13,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index b3f2cc588..52a24cdb0 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/dfu_runtime/Makefile b/examples/device/dfu_runtime/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/dfu_runtime/Makefile +++ b/examples/device/dfu_runtime/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/dynamic_configuration/Makefile b/examples/device/dynamic_configuration/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/dynamic_configuration/Makefile +++ b/examples/device/dynamic_configuration/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index b3f2cc588..52a24cdb0 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_composite/Makefile b/examples/device/hid_composite/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/hid_composite/Makefile +++ b/examples/device/hid_composite/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index a892e7d1d..add9e9814 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -1,6 +1,6 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel -include ../../make.mk +include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) @@ -44,4 +44,4 @@ CFLAGS_GCC += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_generic_inout/Makefile b/examples/device/hid_generic_inout/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/hid_generic_inout/Makefile +++ b/examples/device/hid_generic_inout/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_multiple_interface/Makefile b/examples/device/hid_multiple_interface/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/hid_multiple_interface/Makefile +++ b/examples/device/hid_multiple_interface/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/midi_test/Makefile b/examples/device/midi_test/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/midi_test/Makefile +++ b/examples/device/midi_test/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/msc_dual_lun/Makefile b/examples/device/msc_dual_lun/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/msc_dual_lun/Makefile +++ b/examples/device/msc_dual_lun/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 90b429d00..22426ba0d 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -1,6 +1,6 @@ DEPS_SUBMODULES += lib/lwip -include ../../make.mk +include ../../build_system/make/make.mk # suppress warning caused by lwip CFLAGS_GCC += \ @@ -67,4 +67,4 @@ SRC_C += \ lib/networking/dnserver.c \ lib/networking/rndis_reports.c -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/uac2_headset/Makefile b/examples/device/uac2_headset/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/uac2_headset/Makefile +++ b/examples/device/uac2_headset/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/usbtmc/Makefile b/examples/device/usbtmc/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/usbtmc/Makefile +++ b/examples/device/usbtmc/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index 90d174c32..d698a848d 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk ifeq ($(DISABLE_MJPEG),1) CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG @@ -15,4 +15,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/webusb_serial/Makefile b/examples/device/webusb_serial/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/webusb_serial/Makefile +++ b/examples/device/webusb_serial/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 95c88e7e8..2c2168f5d 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -15,4 +15,4 @@ SRC_C += \ src/host/hub.c \ src/host/usbh.c -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index 161f8c774..0235e08c3 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -10,4 +10,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 15b8a5b31..213c02f9c 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -13,4 +13,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index a9670b4f2..5351a6248 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) @@ -31,4 +31,4 @@ SRC_C += \ SRC_S += \ $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index e7f603f25..1377f1f90 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index 8319d3c2b..c7d6a7cae 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FATFS_PATH = lib/fatfs/source @@ -24,4 +24,4 @@ SRC_C += \ # suppress warning caused by fatfs CFLAGS += -Wno-error=cast-qual -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/typec/power_delivery/Makefile b/examples/typec/power_delivery/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/typec/power_delivery/Makefile +++ b/examples/typec/power_delivery/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/tools/build_make.py b/tools/build_make.py index cd9884313..f79a452e4 100644 --- a/tools/build_make.py +++ b/tools/build_make.py @@ -43,9 +43,9 @@ if __name__ == '__main__': # If examples are not specified in arguments, build all all_examples = [] for d in os.scandir("examples"): - if d.is_dir() and 'cmake' not in d.name: + if d.is_dir() and 'cmake' not in d.name and 'build_system' not in d.name: for entry in os.scandir(d.path): - if entry.is_dir() and 'cmake' not in entry.name and entry.name != 'build_system': + if entry.is_dir() and 'cmake' not in entry.name: all_examples.append(d.name + '/' + entry.name) filter_with_input(all_examples) all_examples.sort()