#include <stdint.h> /* Standard Integer Types */
#include <stdio.h> /* Standard IO facilities */
#include <stdlib.h> /* General utilities */
#include <stdbool.h> /* Boolean */
#include <string.h> /* Strings */
#include <avr/io.h> /* AVR device-specific IO definitions */
#include <util/delay.h> /* Convenience functions for busy-wait delay loops */
#include <avr/interrupt.h> /* Interrupts */

#include "main.h"
#include "uart.h"
#include "ir_nec.h"

/* global variables */
#define INPUT_MAX 255 /* max length for user input string */
char input[INPUT_MAX+2]; /* user input from USART */
volatile uint8_t input_i = 0; /* user input index */
volatile uint8_t pwr_ok; /* is power ok */
volatile uint8_t fan; /* fan signal state, to measure tachometer */
volatile uint8_t timer2_ovf = 0; /* to measure fan speed using timer 2 */
static const uint16_t TIMER2_PRESCALE[8] = {0,1,8,32,64,128,256,1024}; /* timer 2 CS2[2:0] values */
volatile uint16_t tachometer = 0; /* the tachometer time (from timer) */
volatile uint8_t ir; /* IR signal state, to measure IR code */
static const uint16_t TIMER1_PRESCALE[8] = {0,1,8,64,256,1024,0,0}; /* timer 1 CS1[2:0] values */
volatile uint16_t ir_tick; /* number of counter ticks per millisecond */
volatile uint8_t pulse = 0; /* pulse index within the burst */
#define PULSE_MAX 128 /* maximum number of pulses to save */
uint16_t burst[PULSE_MAX]; /* pulse times forming a burst (from timer) */

/* flags, set in the interrupts and handled in the main program */
volatile bool input_flag = false;
volatile bool power_flag = false;

/* UART receive interrupt */
ISR(USART_RX_vect) {
	input[input_i] = getchar(); /* save input */
	input[input_i+1] = 0; /* always end the string */
	if (input_i<INPUT_MAX) { /* next character, if space is available */
		input_i++;
	}
	input_flag = true; /* set flag */
}

/* power ok interrupt */
ISR(PCINT0_vect) { /* PCI0 Interrupt Vector for PCINT[7:0] */
	if (pwr_ok!=(PINB&(1<<PWR_OK))) { /* did the PWR_OK pin state changed */
		pwr_ok = PINB&(1<<PWR_OK); /* save new state */
		power_flag = true;
	} else if (ir!=(PINB&(1<<IR))) { /* did the IR pin state changed */
		ir = PINB&(1<<IR); /* save new state */
		if (pulse>0) { /* save pulse, except the first */
			burst[pulse-1] = (TCNT1*1000UL)/ir_tick;
			burst[pulse] = 0;
		}
		if (pulse<PULSE_MAX-1) { /* prepare to save next pulse */
			pulse++;
		}
		TCNT1 = 0; /* clear timer 1 */
	}
}

/* fan tachometer interrupt */
ISR(PCINT1_vect) { /* PCI0 Interrupt Vector for PCINT[14:8] */
	if (fan!=(PINC&(1<<FAN))) { /* did the FAN pin state changed */
		fan = PINC&(1<<FAN); /* save new state */
		if (fan) { /* only react to rising edge */
			tachometer = (uint16_t)(timer2_ovf<<8)+TCNT2; /* save time */
			TCNT2 = 0; /* reset timer 2 */
			timer2_ovf = 0; /* reset timer 2 */
		}
	}
}

/* timer 2 interrupt used to measure fan speed based on tachometer */
ISR(TIMER2_OVF_vect) { /* timer 2 overflow interrupt vector */
	if (timer2_ovf<0xff) { /* prevent overflow */
		timer2_ovf++; /* increase tachometer counter */
	}
}

/* timer 1 interrupt used to measure IR pulse */
ISR(TIMER1_COMPA_vect) { /* timer 1 OCR1A match interrupt vector */
	if (pulse>0) {
		time2nec(burst,pulse-1);
		struct nec ir_data = nec2data(burst,pulse-1);
		if (ir_data.valid) {
			if (ir_data.repeat) {
				printf("IR signal repeated\n");
			} else {
				printf("IR addr: %u, command: %u\n",ir_data.address,ir_data.command);
			}
		}
		pulse = 0;
	}
}

static void ioinit(void)
{
	/* configure power */
	DDRB |= (1<<nPS_ON); /* nPS_ON is output */
	PORTB |= (1<<nPS_ON); /* switch off power supply */
	DDRB &= ~(1<<PWR_OK); /* PWR_ON (PB1/PCINT1) is input */
	pwr_ok = PINB&(1<<PWR_OK); /* save state */
	PCIFR &= ~(1<<PCIF0); /* clear interrupt flag */
	PCICR |= (1<<PCIE0); /* enable interrupt for PCINT[7:0] */
	PCMSK0 |= (1<<PCINT1); /* enable interrupt for PCINT1 */

	/* configure LED (on PD6/OC0A) */
	DDRD |= (1<<LED); /* LED is output */
	/* use timer 1 to produce a PWM */
	/* use phase correct PWM mode (because fast PWM is always on for at least 1 cycle) */
	TCCR0A &= ~(1<<WGM01);
	TCCR0A |= (1<<WGM00);
	TCCR0B &= ~(1<<WGM02);
	/* /64 prescale timer */
	TCCR0B &= ~(1<<CS02);
	TCCR0B |= (1<<CS01)|(1<<CS00);
	/* clear on match, because the pin is used as sink */
	TCCR0A |= (1<<COM0A1)|(1<<COM0A0);
	/* start with LED on */
	OCR0A = 0xff;
	
	/* configure FAN */
	DDRC &= ~(1<<FAN); /* FAN (PC5/PCINT13) is input */
	fan = PINC&(1<<FAN); /* save state */
	PCIFR &= ~(1<<PCIF1); /* clear interrupt flag */
	PCICR |= (1<<PCIE1); /* enable interrupt for PCINT[14:8] */
	PCMSK1 |= (1<<PCINT13); /* enable interrupt for PCINT1 */
	/* use timer 2 to measure the tachometer */
	/* use normal mode */
	TCCR2A &= ~((1<<WGM20)|(1<<WGM21));
	TCCR2B &= ~(1<<WGM22);
	/* clock/64 prescaler */
	TCCR2B |= (1<<CS22);
	TCCR2B &= ~((1<<CS21)|(1<<CS20));
	TIFR2 &= ~(1<<TOV2); /* clear timer 2 overflow interrupt flag */
	TIMSK2 |= (1<<TOIE2); /* enable timer 2 overflow interrupt */

	/* configure IR receiver */
	DDRB &= ~(1<<IR); /* IR (PB0/PCINT0) receiver is input */
	ir = PINB&(1<<IR); /* save state */
	PCIFR &= ~(1<<PCIF0); /* clear interrupt flag */
	PCICR |= (1<<PCIE0); /* enable interrupt for PCINT[7:0] */
	PCMSK0 |= (1<<PCINT0); /* enable interrupt for PCINT0 */
	/* use timer 1 to measure IR pulse */
	/* use CTC mode */
	TCCR1A &= ~((1<<WGM10)|(1<<WGM11));
	TCCR1B |= (1<<WGM12);
	TCCR1B &= ~(1<<WGM13);
	/* clock/8 prescaler, offers most precision for 15ms (up to 28.5ms) */
	TCCR1B |= (1<<CS11);
	TCCR1B &= ~((1<<CS12)|(1<<CS10));
	uint16_t prescale = TIMER1_PRESCALE[(TCCR1B&((1<<CS12)|(1<<CS11)|(1<<CS10)))>>CS10]; /* timer 1 presacler */
	if (0!=prescale) {
		ir_tick = F_CPU/(1000*prescale); /* ticks per ms */
		OCR1A = (uint32_t)(15*F_CPU)/(1000*prescale); /* set clear time to 15 ms (no IR toggle should be longer) */
	}
	TIFR1 &= ~(1<<OCF1A); /* clear timer 1 overflow interrupt flag */
	TIMSK1 |= (1<<OCIE1A); /* enable timer 1 overflow interrupt */

	/* configure channels (used for powering LEDs using an nMOS) */
	DDRC |= (1<<CH1_1)|(1<<CH1_2)|(1<<CH1_3)|(1<<CH1_4)|(1<<CH1_5); /* CH1_x is output */
	PORTC &= ~((1<<CH1_1)|(1<<CH1_2)|(1<<CH1_3)|(1<<CH1_4)|(1<<CH1_5)); /* switch off CH1_x */
	DDRD |= (1<<CH2_1)|(1<<CH2_2)|(1<<CH2_3)|(1<<CH2_4)|(1<<CH2_5); /* CH2_x is output */
	PORTD &= ~((1<<CH2_1)|(1<<CH2_2)|(1<<CH2_3)|(1<<CH2_4)|(1<<CH2_5)); /* switch off CH2_x */

	/* use UART as terminal */
	uart_init();
	stdout = &uart_output;
	stdin  = &uart_input;

	sei(); /* enable interrupts */
}

int main(void)
{
	ioinit(); /* initialize IOs */

	uint8_t command_i = 0; /* command index */
	char c = 0;

	puts("LED dimmer up & running");
	while (true) {
		/* handle user input */
		while (input_flag) {
			while (command_i<input_i) {
				c = input[command_i++];
				putchar(c); /* echo back */
			}
			input_flag = false;
		}
	}
{
		_delay_ms(1000);
		
		switch (c) {
			case 'l':
				PIND |= (1<<LED);
				printf("LED: ");
				if (PIND&(1<<LED)) {
					puts("off");
				} else {
					puts("on");
				}
				break;
			case 'a':
				printf("switching power supply ");
				if (PINB&(1<<nPS_ON)) {
					puts("on");
				} else {
					puts("off");
				}
				PINB |= (1<<nPS_ON);
				break;
			case 's':
				printf("power: ");
				if (PINB&(1<<PWR_OK)) {
					puts("ok");
				} else {
					puts("ko");
				}
				break;
			case '1':
				PINC |= (1<<CH1_1);
				printf("CH1_1: ");
				if (PINC&(1<<CH1_1)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '2':
				PINC |= (1<<CH1_2);
				printf("CH1_2: ");
				if (PINC&(1<<CH1_2)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '3':
				PINC |= (1<<CH1_3);
				printf("CH1_3: ");
				if (PINC&(1<<CH1_3)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '4':
				PINC |= (1<<CH1_4);
				printf("CH1_4: ");
				if (PINC&(1<<CH1_4)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '5':
				PINC |= (1<<CH1_5);
				printf("CH1_5: ");
				if (PINC&(1<<CH1_5)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '6':
				PIND |= (1<<CH2_1);
				printf("CH2_1: ");
				if (PIND&(1<<CH2_1)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '7':
				PIND |= (1<<CH2_2);
				printf("CH2_2: ");
				if (PIND&(1<<CH2_2)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '8':
				PIND |= (1<<CH2_3);
				printf("CH2_3: ");
				if (PIND&(1<<CH2_3)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '9':
				PIND |= (1<<CH2_4);
				printf("CH2_4: ");
				if (PIND&(1<<CH2_4)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '0':
				PIND |= (1<<CH2_5);
				printf("CH2_5: ");
				if (PIND&(1<<CH2_5)) {
					puts("on");
				} else {
					puts("off");
				}
				break;
			case '-':
				if (OCR0A>0) {
					OCR0A--;
				}
				printf("decreasing LED: %u\n",OCR0A);
				break;
			case '+':
				if (OCR0A<0xff) {
					OCR0A++;
				}
				printf("increasing LED: %u\n",OCR0A);
				break;
			case 't':
				if (tachometer) {
					uint16_t prescale = TIMER2_PRESCALE[TCCR2B&((1<<CS22)|(1<<CS21)|(1<<CS20))];
					if (prescale) {
						if (timer2_ovf<0xff) {
							uint32_t speed = ((60*F_CPU)/(prescale*(uint32_t)tachometer))/2; /* calculate speed. 2 pulses per revolution */
							printf("fan speed: %lurpm\n",speed);
						} else {
							printf("fan off (or not detected)\n");
						}
					} else {
						printf("fan speed measurement not started\n");
					}
				} else {
					printf("fan off (or not detected)\n");
				}
				break;
		}
	}

	return 0;
}