/* This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
/* This is part of the LED light controller program.
 * It handles the USART configuration
 */

#include <stdint.h> /* Standard Integer Types */
#include <stdio.h> /* Standard IO facilities */
#include <stdlib.h> /* General utilities */
#include <avr/io.h> /* AVR device-specific IO definitions */

#include "uart.h"
#include <util/setbaud.h> /* Helper macros for baud rate calculations */

FILE uart_output = FDEV_SETUP_STREAM(uart_putchar, NULL, _FDEV_SETUP_WRITE);
FILE uart_input = FDEV_SETUP_STREAM(NULL, uart_getchar, _FDEV_SETUP_READ);
FILE uart_io = FDEV_SETUP_STREAM(uart_putchar, uart_getchar, _FDEV_SETUP_RW);

/* configure serial port */
void uart_init(void)
{
	UBRR0H = UBRRH_VALUE;
	UBRR0L = UBRRL_VALUE;
#if USE_2X
	UCSR0A |= (1<<U2X0);
#else
	UCSR0A &= ~(1<<U2X0);
#endif
	UCSR0C = (1<<UCSZ01)|(1<<UCSZ00); /* 8N1 bit data */
	UCSR0B = (1<<RXEN0)|(1<<TXEN0);   /* enable RX and TX */
	UCSR0B |= (1<<RXCIE0); /* enable RX complete interrupt */
}

void uart_putchar(char c, FILE *stream)
{
	if (c == '\n') {
		uart_putchar('\r', stream);
	}
	loop_until_bit_is_set(UCSR0A, UDRE0);
	UDR0 = c;
}

char uart_getchar(FILE *stream)
{
	loop_until_bit_is_set(UCSR0A, RXC0); /* Wait until data exists. */
	return UDR0;
}