/****************************************************************************
 *   $Id:: gpio.h 6172 2011-01-13 18:22:51Z usb00423                        $
 *   Project: NXP LPC11Uxx software example
 *
 *   Description:
 *     This file contains definition and prototype for GPIO.
 *
 ****************************************************************************
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * products. This software is supplied "AS IS" without any warranties.
 * NXP Semiconductors assumes no responsibility or liability for the
 * use of the software, conveys no license or title under any patent,
 * copyright, or mask work right to the product. NXP Semiconductors
 * reserves the right to make changes in the software without
 * notification. NXP Semiconductors also make no representation or
 * warranty that such application will be suitable for the specified
 * use without further testing or modification.
****************************************************************************/
#ifndef __GPIO_H 
#define __GPIO_H

#define CHANNEL0	0
#define CHANNEL1	1
#define CHANNEL2	2
#define CHANNEL3	3
#define CHANNEL4	4
#define CHANNEL5	5
#define CHANNEL6	6
#define CHANNEL7	7

#define PORT0		0
#define PORT1		1

#define GROUP0		0
#define GROUP1		1

void FLEX_INT0_IRQHandler(void);
void FLEX_INT1_IRQHandler(void);
void FLEX_INT2_IRQHandler(void);
void FLEX_INT3_IRQHandler(void);
void FLEX_INT4_IRQHandler(void);
void FLEX_INT5_IRQHandler(void);
void FLEX_INT6_IRQHandler(void);
void FLEX_INT7_IRQHandler(void);
void GINT0_IRQHandler(void);
void GINT1_IRQHandler(void);
void GPIOInit( void );
void GPIOSetFlexInterrupt( uint32_t channelNum, uint32_t portNum, uint32_t bitPosi,
		uint32_t sense, uint32_t event );
void GPIOFlexIntEnable( uint32_t channelNum, uint32_t event );
void GPIOFlexIntDisable( uint32_t channelNum, uint32_t event );
uint32_t GPIOFlexIntStatus( uint32_t channelNum );
void GPIOFlexIntClear( uint32_t channelNum );
void GPIOSetGroupedInterrupt( uint32_t groupNum, uint32_t *bitPattern, uint32_t logic,
		uint32_t sense, uint32_t *eventPattern );
uint32_t GPIOGetPinValue( uint32_t portNum, uint32_t bitPosi );
void GPIOSetBitValue( uint32_t portNum, uint32_t bitPosi, uint32_t bitVal );
void GPIOSetDir( uint32_t portNum, uint32_t bitPosi, uint32_t dir );

#endif /* end __GPIO_H */
/*****************************************************************************
**                            End Of File
******************************************************************************/