From f0ffe7b9841a6767d86ff07a8fb099ab14893fd8 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 28 Nov 2020 01:06:10 +0700 Subject: [PATCH] group more nrf52840 boards --- hw/bsp/nrf/boards/adafruit_clue/board.mk | 7 +- .../circuitplayground_bluefruit/board.h | 52 ++++ .../circuitplayground_bluefruit/board.mk | 7 +- .../boards/feather_nrf52840_express/board.mk | 7 +- .../boards/feather_nrf52840_sense/board.mk | 7 +- hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk | 7 +- .../nrf/boards/nrf52840_mdk_dongle/board.mk | 6 +- hw/bsp/nrf/boards/pca10056/board.h | 50 ++++ hw/bsp/nrf/boards/pca10056/board.mk | 4 + hw/bsp/nrf/boards/pca10059/board.h | 52 ++++ hw/bsp/nrf/boards/pca10059/board.mk | 12 + hw/bsp/{ => nrf/boards}/pca10059/pca10059.ld | 0 hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h | 52 ++++ hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk | 4 + hw/bsp/nrf/family.mk | 8 - hw/bsp/pca10056/board.mk | 55 ----- hw/bsp/pca10056/pca10056.c | 229 ------------------ hw/bsp/pca10059/board.mk | 62 ----- hw/bsp/pca10059/pca10059.c | 196 --------------- hw/bsp/raytac_mdbt50q_rx/board.mk | 53 ---- hw/bsp/raytac_mdbt50q_rx/raytac_mdbt50q_rx.c | 198 --------------- 21 files changed, 259 insertions(+), 809 deletions(-) create mode 100644 hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h create mode 100644 hw/bsp/nrf/boards/pca10056/board.h create mode 100644 hw/bsp/nrf/boards/pca10056/board.mk create mode 100644 hw/bsp/nrf/boards/pca10059/board.h create mode 100644 hw/bsp/nrf/boards/pca10059/board.mk rename hw/bsp/{ => nrf/boards}/pca10059/pca10059.ld (100%) create mode 100644 hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h create mode 100644 hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk delete mode 100644 hw/bsp/pca10056/board.mk delete mode 100644 hw/bsp/pca10056/pca10056.c delete mode 100644 hw/bsp/pca10059/board.mk delete mode 100644 hw/bsp/pca10059/pca10059.c delete mode 100644 hw/bsp/raytac_mdbt50q_rx/board.mk delete mode 100644 hw/bsp/raytac_mdbt50q_rx/raytac_mdbt50q_rx.c diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.mk b/hw/bsp/nrf/boards/adafruit_clue/board.mk index 3b1c20f5..40278bc6 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.mk +++ b/hw/bsp/nrf/boards/adafruit_clue/board.mk @@ -1,2 +1,7 @@ +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + # flash using adafruit-nrfutil dfu -flash: flash-adafruit-nrfutil +flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h new file mode 100644 index 00000000..a86c9dc7 --- /dev/null +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 14) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN _PINNUM(1, 15) +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_RX_PIN 30 +#define UART_TX_PIN 14 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk index 3b1c20f5..40278bc6 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk @@ -1,2 +1,7 @@ +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + # flash using adafruit-nrfutil dfu -flash: flash-adafruit-nrfutil +flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk b/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk index 3b1c20f5..40278bc6 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk @@ -1,2 +1,7 @@ +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + # flash using adafruit-nrfutil dfu -flash: flash-adafruit-nrfutil +flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk index 3b1c20f5..40278bc6 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk @@ -1,2 +1,7 @@ +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + # flash using adafruit-nrfutil dfu -flash: flash-adafruit-nrfutil +flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk index 3b1c20f5..40278bc6 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk @@ -1,2 +1,7 @@ +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + # flash using adafruit-nrfutil dfu -flash: flash-adafruit-nrfutil +flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk index cf79dd88..d9312ed0 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk @@ -1,12 +1,12 @@ -LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/$(BOARD).ld +LD_FILE ?= $(BOARD_PATH)/$(BOARD).ld # flash using Nordic nrfutil (pip3 install nrfutil) # make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash NRFUTIL = nrfutil -$(BUILD)/$(BOARD)-firmware-nrfutil.zip: $(BUILD)/$(BOARD)-firmware.hex +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ -flash: $(BUILD)/$(BOARD)-firmware-nrfutil.zip +flash: $(BUILD)/$(BOARD)-firmware.zip @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 \ No newline at end of file diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h new file mode 100644 index 00000000..ab12d21a --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 11 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/pca10056/board.mk b/hw/bsp/nrf/boards/pca10056/board.mk new file mode 100644 index 00000000..b1d02591 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/board.mk @@ -0,0 +1,4 @@ +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h new file mode 100644 index 00000000..0810be64 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10059/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 8 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(1, 6) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/pca10059/board.mk b/hw/bsp/nrf/boards/pca10059/board.mk new file mode 100644 index 00000000..9f017106 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10059/board.mk @@ -0,0 +1,12 @@ +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# flash using Nordic nrfutil (pip2 install nrfutil) +# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash +NRFUTIL = nrfutil + +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ + +flash: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/pca10059/pca10059.ld b/hw/bsp/nrf/boards/pca10059/pca10059.ld similarity index 100% rename from hw/bsp/pca10059/pca10059.ld rename to hw/bsp/nrf/boards/pca10059/pca10059.ld diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h new file mode 100644 index 00000000..dcf829d9 --- /dev/null +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 13) +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(0, 15) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 25 +#define UART_TX_PIN 24 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk new file mode 100644 index 00000000..b1d02591 --- /dev/null +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk @@ -0,0 +1,4 @@ +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index edd76448..f07e1157 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -54,11 +54,3 @@ JLINK_DEVICE = nRF52840_xxAA # For uf2 conversion UF2_FAMILY = 0xADA52840 - -$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex - adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ - -# flash using adafruit-nrfutil dfu -flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/hw/bsp/pca10056/board.mk b/hw/bsp/pca10056/board.mk deleted file mode 100644 index 8f4887dc..00000000 --- a/hw/bsp/pca10056/board.mk +++ /dev/null @@ -1,55 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DNRF52840_XXAA \ - -DCONFIG_GPIO_AS_PINRESET \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align - -# due to tusb_hal_nrf_power_event -GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) -ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) -CFLAGS += -Wno-error=cast-function-type -endif - -# All source paths should be relative to the top level. -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld - -LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk - -SRC_C += \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \ - hw/mcu/nordic/nrfx/mdk/system_nrf52840.c - -INC += \ - $(TOP)/lib/CMSIS_4/CMSIS/Include \ - $(TOP)/hw/mcu/nordic \ - $(TOP)/hw/mcu/nordic/nrfx \ - $(TOP)/hw/mcu/nordic/nrfx/mdk \ - $(TOP)/hw/mcu/nordic/nrfx/hal \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ - -SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S - -ASFLAGS += -D__HEAP_SIZE=0 - -# For TinyUSB port source -VENDOR = nordic -CHIP_FAMILY = nrf5x - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = nRF52840_xxAA - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/pca10056/pca10056.c b/hw/bsp/pca10056/pca10056.c deleted file mode 100644 index 30df5012..00000000 --- a/hw/bsp/pca10056/pca10056.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" - -#include "nrfx.h" -#include "nrfx/hal/nrf_gpio.h" -#include "nrfx/drivers/include/nrfx_power.h" -#include "nrfx/drivers/include/nrfx_uarte.h" - -#ifdef SOFTDEVICE_PRESENT -#include "nrf_sdm.h" -#include "nrf_soc.h" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ -#define LED_PIN 13 -#define LED_STATE_ON 0 - -#define BUTTON_PIN 11 -#define BUTTON_STATE_ACTIVE 0 - -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); -//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context); - -// tinyusb function that handles power event (detected, ready, removed) -// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. -extern void tusb_hal_nrf_power_event(uint32_t event); - -void board_init(void) -{ - // stop LF clock just in case we jump from application without reset - NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; - - // Use Internal OSC to compatible with all boards - NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC; - NRF_CLOCK->TASKS_LFCLKSTART = 1UL; - - // LED - nrf_gpio_cfg_output(LED_PIN); - board_led_write(false); - - // Button - nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); - - // 1ms tick timer - SysTick_Config(SystemCoreClock/1000); - - // UART - nrfx_uarte_config_t uart_cfg = - { - .pseltxd = UART_TX_PIN, - .pselrxd = UART_RX_PIN, - .pselcts = NRF_UARTE_PSEL_DISCONNECTED, - .pselrts = NRF_UARTE_PSEL_DISCONNECTED, - .p_context = NULL, - .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE - .interrupt_priority = 7, - .hal_cfg = { - .hwfc = NRF_UARTE_HWFC_DISABLED, - .parity = NRF_UARTE_PARITY_EXCLUDED, - } - }; - - nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); - -#if TUSB_OPT_DEVICE_ENABLED - // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice - // 2 is highest for application - NVIC_SetPriority(USBD_IRQn, 2); - - // USB power may already be ready at this time -> no event generated - // We need to invoke the handler based on the status initially - uint32_t usb_reg; - -#ifdef SOFTDEVICE_PRESENT - uint8_t sd_en = false; - sd_softdevice_is_enabled(&sd_en); - - if ( sd_en ) { - sd_power_usbdetected_enable(true); - sd_power_usbpwrrdy_enable(true); - sd_power_usbremoved_enable(true); - - sd_power_usbregstatus_get(&usb_reg); - }else -#endif - { - // Power module init - const nrfx_power_config_t pwr_cfg = { 0 }; - nrfx_power_init(&pwr_cfg); - - // Register tusb function as USB power handler - // cause cast-function-type warning - const nrfx_power_usbevt_config_t config = { .handler = ((nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event) }; - nrfx_power_usbevt_init(&config); - - nrfx_power_usbevt_enable(); - - usb_reg = NRF_POWER->USBREGSTATUS; - } - - if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); - if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); -} - -//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context) -//{ -// -//} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; -} - -int board_uart_write(void const * buf, int len) -{ - return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef SOFTDEVICE_PRESENT -// process SOC event from SD -uint32_t proc_soc(void) -{ - uint32_t soc_evt; - uint32_t err = sd_evt_get(&soc_evt); - - if (NRF_SUCCESS == err) - { - /*------------- usb power event handler -------------*/ - int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: - (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : - (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; - - if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); - } - - return err; -} - -uint32_t proc_ble(void) -{ - // do nothing with ble - return NRF_ERROR_NOT_FOUND; -} - -void SD_EVT_IRQHandler(void) -{ - // process BLE and SOC until there is no more events - while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) - { - - } -} - -void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) -{ - (void) id; - (void) pc; - (void) info; -} -#endif diff --git a/hw/bsp/pca10059/board.mk b/hw/bsp/pca10059/board.mk deleted file mode 100644 index bd7a80c0..00000000 --- a/hw/bsp/pca10059/board.mk +++ /dev/null @@ -1,62 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DNRF52840_XXAA \ - -DCONFIG_GPIO_AS_PINRESET \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align - -# due to tusb_hal_nrf_power_event -GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) -ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) -CFLAGS += -Wno-error=cast-function-type -endif - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/$(BOARD).ld - -LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk - -SRC_C += \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ - hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ - -INC += \ - $(TOP)/lib/CMSIS_4/CMSIS/Include \ - $(TOP)/hw/mcu/nordic \ - $(TOP)/hw/mcu/nordic/nrfx \ - $(TOP)/hw/mcu/nordic/nrfx/mdk \ - $(TOP)/hw/mcu/nordic/nrfx/hal \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ - -SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S - -ASFLAGS += -D__HEAP_SIZE=0 - -# For TinyUSB port source -VENDOR = nordic -CHIP_FAMILY = nrf5x - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = nRF52840_xxAA - -# flash using Nordic nrfutil (pip2 install nrfutil) -# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash -NRFUTIL = nrfutil - -$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex - $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ - -flash: $(BUILD)/$(BOARD)-firmware.zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/pca10059/pca10059.c b/hw/bsp/pca10059/pca10059.c deleted file mode 100644 index 2a2a45eb..00000000 --- a/hw/bsp/pca10059/pca10059.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" - -#include "nrfx.h" -#include "nrfx/hal/nrf_gpio.h" -#include "nrfx/drivers/include/nrfx_power.h" - -#ifdef SOFTDEVICE_PRESENT -#include "nrf_sdm.h" -#include "nrf_soc.h" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ -#define LED_PIN 8 -#define LED_STATE_ON 0 - -// Button 1 -#define BUTTON_PIN (32+6) // P1.06 -#define BUTTON_STATE_ACTIVE 0 - -// tinyusb function that handles power event (detected, ready, removed) -// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. -extern void tusb_hal_nrf_power_event(uint32_t event); - -void board_init(void) -{ - // Config clock source: XTAL or RC in sdk_config.h - NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk); - NRF_CLOCK->TASKS_LFCLKSTART = 1UL; - - // LED - nrf_gpio_cfg_output(LED_PIN); - board_led_write(false); - - // Button - nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); - - // 1ms tick timer - SysTick_Config(SystemCoreClock/1000); - -#if TUSB_OPT_DEVICE_ENABLED - // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice - // 2 is highest for application - NVIC_SetPriority(USBD_IRQn, 2); - - // USB power may already be ready at this time -> no event generated - // We need to invoke the handler based on the status initially - uint32_t usb_reg; - -#ifdef SOFTDEVICE_PRESENT - uint8_t sd_en = false; - sd_softdevice_is_enabled(&sd_en); - - if ( sd_en ) { - sd_power_usbdetected_enable(true); - sd_power_usbpwrrdy_enable(true); - sd_power_usbremoved_enable(true); - - sd_power_usbregstatus_get(&usb_reg); - }else -#endif - { - // Power module init - const nrfx_power_config_t pwr_cfg = { 0 }; - nrfx_power_init(&pwr_cfg); - - // Register tusb function as USB power handler - const nrfx_power_usbevt_config_t config = { .handler = (nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event }; - nrfx_power_usbevt_init(&config); - - nrfx_power_usbevt_enable(); - - usb_reg = NRF_POWER->USBREGSTATUS; - } - - if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); - if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef SOFTDEVICE_PRESENT -// process SOC event from SD -uint32_t proc_soc(void) -{ - uint32_t soc_evt; - uint32_t err = sd_evt_get(&soc_evt); - - if (NRF_SUCCESS == err) - { - /*------------- usb power event handler -------------*/ - int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: - (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : - (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; - - if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); - } - - return err; -} - -uint32_t proc_ble(void) -{ - // do nothing with ble - return NRF_ERROR_NOT_FOUND; -} - -void SD_EVT_IRQHandler(void) -{ - // process BLE and SOC until there is no more events - while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) - { - - } -} - -void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) -{ - (void) id; - (void) pc; - (void) info; -} -#endif diff --git a/hw/bsp/raytac_mdbt50q_rx/board.mk b/hw/bsp/raytac_mdbt50q_rx/board.mk deleted file mode 100644 index e153aab0..00000000 --- a/hw/bsp/raytac_mdbt50q_rx/board.mk +++ /dev/null @@ -1,53 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DNRF52840_XXAA \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align - -# due to tusb_hal_nrf_power_event -GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) -ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) -CFLAGS += -Wno-error=cast-function-type -endif - -# All source paths should be relative to the top level. -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld - -LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk - -SRC_C += \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ - hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ - -INC += \ - $(TOP)/lib/CMSIS_4/CMSIS/Include \ - $(TOP)/hw/mcu/nordic \ - $(TOP)/hw/mcu/nordic/nrfx \ - $(TOP)/hw/mcu/nordic/nrfx/mdk \ - $(TOP)/hw/mcu/nordic/nrfx/hal \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ - -SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S - -ASFLAGS += -D__HEAP_SIZE=0 - -# For TinyUSB port source -VENDOR = nordic -CHIP_FAMILY = nrf5x - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = nRF52840_xxAA - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/raytac_mdbt50q_rx/raytac_mdbt50q_rx.c b/hw/bsp/raytac_mdbt50q_rx/raytac_mdbt50q_rx.c deleted file mode 100644 index 97f3cbf0..00000000 --- a/hw/bsp/raytac_mdbt50q_rx/raytac_mdbt50q_rx.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" - -#include "nrfx.h" -#include "nrfx/hal/nrf_gpio.h" -#include "nrfx/drivers/include/nrfx_power.h" - -#ifdef SOFTDEVICE_PRESENT -#include "nrf_sdm.h" -#include "nrf_soc.h" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ -#define LED_PIN (32+13) // P1.13 -#define LED_STATE_ON 0 - -// Button 1 -#define BUTTON_PIN 15 // P0.15 -#define BUTTON_STATE_ACTIVE 0 - -// tinyusb function that handles power event (detected, ready, removed) -// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. -extern void tusb_hal_nrf_power_event(uint32_t event); - -void board_init(void) -{ - // Config clock source: XTAL or RC in sdk_config.h - NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk); - NRF_CLOCK->TASKS_LFCLKSTART = 1UL; - - // LED - nrf_gpio_cfg_output(LED_PIN); - board_led_write(false); - - // Button - nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock/1000); -#endif - -#if TUSB_OPT_DEVICE_ENABLED - // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice - // 2 is highest for application - NVIC_SetPriority(USBD_IRQn, 2); - - // USB power may already be ready at this time -> no event generated - // We need to invoke the handler based on the status initially - uint32_t usb_reg; - -#ifdef SOFTDEVICE_PRESENT - uint8_t sd_en = false; - sd_softdevice_is_enabled(&sd_en); - - if ( sd_en ) { - sd_power_usbdetected_enable(true); - sd_power_usbpwrrdy_enable(true); - sd_power_usbremoved_enable(true); - - sd_power_usbregstatus_get(&usb_reg); - }else -#endif - { - // Power module init - const nrfx_power_config_t pwr_cfg = { 0 }; - nrfx_power_init(&pwr_cfg); - - // Register tusb function as USB power handler - const nrfx_power_usbevt_config_t config = { .handler = (nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event }; - nrfx_power_usbevt_init(&config); - - nrfx_power_usbevt_enable(); - - usb_reg = NRF_POWER->USBREGSTATUS; - } - - if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); - if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef SOFTDEVICE_PRESENT -// process SOC event from SD -uint32_t proc_soc(void) -{ - uint32_t soc_evt; - uint32_t err = sd_evt_get(&soc_evt); - - if (NRF_SUCCESS == err) - { - /*------------- usb power event handler -------------*/ - int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: - (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : - (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; - - if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); - } - - return err; -} - -uint32_t proc_ble(void) -{ - // do nothing with ble - return NRF_ERROR_NOT_FOUND; -} - -void SD_EVT_IRQHandler(void) -{ - // process BLE and SOC until there is no more events - while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) - { - - } -} - -void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) -{ - (void) id; - (void) pc; - (void) info; -} -#endif