diff --git a/hw/mcu/nordic/nrfx_config.h b/hw/mcu/nordic/nrfx_config.h
index 76a2d4dd..a6b37e38 100644
--- a/hw/mcu/nordic/nrfx_config.h
+++ b/hw/mcu/nordic/nrfx_config.h
@@ -86,149 +86,6 @@
#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
#endif
-//
-
-//
-
-// NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// NRFX_COMP_CONFIG_REF - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// NRFX_COMP_CONFIG_MAIN_MODE - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// NRFX_COMP_CONFIG_SPEED_MODE - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// NRFX_COMP_CONFIG_HYST - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// NRFX_COMP_CONFIG_ISOURCE - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// NRFX_COMP_CONFIG_INPUT - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// NRFX_COMP_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_COMP_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_COMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
// NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
//==========================================================
#ifndef NRFX_GPIOTE_ENABLED
@@ -307,431 +164,6 @@
//
-// NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver
-//==========================================================
-#ifndef NRFX_I2S_ENABLED
-#define NRFX_I2S_ENABLED 1
-#endif
-// NRFX_I2S_CONFIG_SCK_PIN - SCK pin <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SCK_PIN
-#define NRFX_I2S_CONFIG_SCK_PIN 31
-#endif
-
-// NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin <1-31>
-
-
-#ifndef NRFX_I2S_CONFIG_LRCK_PIN
-#define NRFX_I2S_CONFIG_LRCK_PIN 30
-#endif
-
-// NRFX_I2S_CONFIG_MCK_PIN - MCK pin
-#ifndef NRFX_I2S_CONFIG_MCK_PIN
-#define NRFX_I2S_CONFIG_MCK_PIN 255
-#endif
-
-// NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDOUT_PIN
-#define NRFX_I2S_CONFIG_SDOUT_PIN 29
-#endif
-
-// NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDIN_PIN
-#define NRFX_I2S_CONFIG_SDIN_PIN 28
-#endif
-
-// NRFX_I2S_CONFIG_MASTER - Mode
-
-// <0=> Master
-// <1=> Slave
-
-#ifndef NRFX_I2S_CONFIG_MASTER
-#define NRFX_I2S_CONFIG_MASTER 0
-#endif
-
-// NRFX_I2S_CONFIG_FORMAT - Format
-
-// <0=> I2S
-// <1=> Aligned
-
-#ifndef NRFX_I2S_CONFIG_FORMAT
-#define NRFX_I2S_CONFIG_FORMAT 0
-#endif
-
-// NRFX_I2S_CONFIG_ALIGN - Alignment
-
-// <0=> Left
-// <1=> Right
-
-#ifndef NRFX_I2S_CONFIG_ALIGN
-#define NRFX_I2S_CONFIG_ALIGN 0
-#endif
-
-// NRFX_I2S_CONFIG_SWIDTH - Sample width (bits)
-
-// <0=> 8
-// <1=> 16
-// <2=> 24
-
-#ifndef NRFX_I2S_CONFIG_SWIDTH
-#define NRFX_I2S_CONFIG_SWIDTH 1
-#endif
-
-// NRFX_I2S_CONFIG_CHANNELS - Channels
-
-// <0=> Stereo
-// <1=> Left
-// <2=> Right
-
-#ifndef NRFX_I2S_CONFIG_CHANNELS
-#define NRFX_I2S_CONFIG_CHANNELS 1
-#endif
-
-// NRFX_I2S_CONFIG_MCK_SETUP - MCK behavior
-
-// <0=> Disabled
-// <2147483648=> 32MHz/2
-// <1342177280=> 32MHz/3
-// <1073741824=> 32MHz/4
-// <805306368=> 32MHz/5
-// <671088640=> 32MHz/6
-// <536870912=> 32MHz/8
-// <402653184=> 32MHz/10
-// <369098752=> 32MHz/11
-// <285212672=> 32MHz/15
-// <268435456=> 32MHz/16
-// <201326592=> 32MHz/21
-// <184549376=> 32MHz/23
-// <142606336=> 32MHz/30
-// <138412032=> 32MHz/31
-// <134217728=> 32MHz/32
-// <100663296=> 32MHz/42
-// <68157440=> 32MHz/63
-// <34340864=> 32MHz/125
-
-#ifndef NRFX_I2S_CONFIG_MCK_SETUP
-#define NRFX_I2S_CONFIG_MCK_SETUP 536870912
-#endif
-
-// NRFX_I2S_CONFIG_RATIO - MCK/LRCK ratio
-
-// <0=> 32x
-// <1=> 48x
-// <2=> 64x
-// <3=> 96x
-// <4=> 128x
-// <5=> 192x
-// <6=> 256x
-// <7=> 384x
-// <8=> 512x
-
-#ifndef NRFX_I2S_CONFIG_RATIO
-#define NRFX_I2S_CONFIG_RATIO 2000
-#endif
-
-// NRFX_I2S_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY
-#define NRFX_I2S_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
-#define NRFX_I2S_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_I2S_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
-#define NRFX_I2S_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_I2S_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_INFO_COLOR
-#define NRFX_I2S_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
-#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
-//==========================================================
-#ifndef NRFX_LPCOMP_ENABLED
-#define NRFX_LPCOMP_ENABLED 1
-#endif
-// NRFX_LPCOMP_CONFIG_REFERENCE - Reference voltage
-
-// <0=> Supply 1/8
-// <1=> Supply 2/8
-// <2=> Supply 3/8
-// <3=> Supply 4/8
-// <4=> Supply 5/8
-// <5=> Supply 6/8
-// <6=> Supply 7/8
-// <8=> Supply 1/16 (nRF52)
-// <9=> Supply 3/16 (nRF52)
-// <10=> Supply 5/16 (nRF52)
-// <11=> Supply 7/16 (nRF52)
-// <12=> Supply 9/16 (nRF52)
-// <13=> Supply 11/16 (nRF52)
-// <14=> Supply 13/16 (nRF52)
-// <15=> Supply 15/16 (nRF52)
-// <7=> External Ref 0
-// <65543=> External Ref 1
-
-#ifndef NRFX_LPCOMP_CONFIG_REFERENCE
-#define NRFX_LPCOMP_CONFIG_REFERENCE 3
-#endif
-
-// NRFX_LPCOMP_CONFIG_DETECTION - Detection
-
-// <0=> Crossing
-// <1=> Up
-// <2=> Down
-
-#ifndef NRFX_LPCOMP_CONFIG_DETECTION
-#define NRFX_LPCOMP_CONFIG_DETECTION 2
-#endif
-
-// NRFX_LPCOMP_CONFIG_INPUT - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_INPUT
-#define NRFX_LPCOMP_CONFIG_INPUT 0
-#endif
-
-// NRFX_LPCOMP_CONFIG_HYST - Hysteresis
-
-
-#ifndef NRFX_LPCOMP_CONFIG_HYST
-#define NRFX_LPCOMP_CONFIG_HYST 0
-#endif
-
-// NRFX_LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY
-#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED
-#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_LPCOMP_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL
-#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR
-#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR
-#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// NRFX_PDM_CONFIG_MODE - Mode
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// NRFX_PDM_CONFIG_EDGE - Edge
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// NRFX_PDM_CONFIG_CLOCK_FREQ - Clock frequency
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// NRFX_PDM_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_PDM_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
// NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
//==========================================================
#ifndef NRFX_POWER_ENABLED
@@ -772,486 +204,6 @@
//
-// NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-// NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module.
-
-
-#ifndef NRFX_PRS_BOX_3_ENABLED
-#define NRFX_PRS_BOX_3_ENABLED 1
-#endif
-
-// NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module.
-
-
-#ifndef NRFX_PRS_BOX_4_ENABLED
-#define NRFX_PRS_BOX_4_ENABLED 1
-#endif
-
-// NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// NRFX_PWM0_ENABLED - Enable PWM0 instance
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// NRFX_PWM1_ENABLED - Enable PWM1 instance
-
-
-#ifndef NRFX_PWM1_ENABLED
-#define NRFX_PWM1_ENABLED 1
-#endif
-
-// NRFX_PWM2_ENABLED - Enable PWM2 instance
-
-
-#ifndef NRFX_PWM2_ENABLED
-#define NRFX_PWM2_ENABLED 1
-#endif
-
-// NRFX_PWM3_ENABLED - Enable PWM3 instance
-
-
-#ifndef NRFX_PWM3_ENABLED
-#define NRFX_PWM3_ENABLED 1
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_STEP_MODE - Step mode
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_PWM_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// NRFX_QDEC_CONFIG_REPORTPER - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// NRFX_QDEC_CONFIG_SAMPLEPER - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// NRFX_QDEC_CONFIG_PIO_A - A pin <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// NRFX_QDEC_CONFIG_PIO_B - B pin <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// NRFX_QDEC_CONFIG_PIO_LED - LED pin <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// NRFX_QDEC_CONFIG_LEDPOL - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// NRFX_QDEC_CONFIG_DBFEN - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// NRFX_QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// NRFX_QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
// NRFX_QSPI_ENABLED - nrfx_qspi - QSPI peripheral driver
//==========================================================
@@ -1574,452 +526,6 @@
//
-// NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// NRFX_SAADC_CONFIG_RESOLUTION - Resolution
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// NRFX_SAADC_CONFIG_OVERSAMPLE - Sample period
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// NRFX_SAADC_CONFIG_LP_MODE - Enabling low power mode
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// NRFX_SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_SAADC_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// NRFX_SPIM0_ENABLED - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// NRFX_SPIM1_ENABLED - Enable SPIM1 instance
-
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// NRFX_SPIM2_ENABLED - Enable SPIM2 instance
-
-
-#ifndef NRFX_SPIM2_ENABLED
-#define NRFX_SPIM2_ENABLED 1
-#endif
-
-// NRFX_SPIM3_ENABLED - Enable SPIM3 instance
-
-
-#ifndef NRFX_SPIM3_ENABLED
-#define NRFX_SPIM3_ENABLED 1
-#endif
-
-// NRFX_SPIM_EXTENDED_ENABLED - Enable extended SPIM features
-
-
-#ifndef NRFX_SPIM_EXTENDED_ENABLED
-#define NRFX_SPIM_EXTENDED_ENABLED 0
-#endif
-
-// NRFX_SPIM_MISO_PULL_CFG - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-// NRFX_SPIM3_NRF52840_ANOMALY_198_WORKAROUND_ENABLED - Enables nRF52840 anomaly 198 workaround for SPIM3.
-
-
-// See more in the Errata document located at
-// https://infocenter.nordicsemi.com/
-
-#ifndef NRFX_SPIM3_NRF52840_ANOMALY_198_WORKAROUND_ENABLED
-#define NRFX_SPIM3_NRF52840_ANOMALY_198_WORKAROUND_ENABLED 0
-#endif
-
-//
-
-// NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// NRFX_SPIS0_ENABLED - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// NRFX_SPIS1_ENABLED - Enable SPIS1 instance
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// NRFX_SPIS2_ENABLED - Enable SPIS2 instance
-
-
-#ifndef NRFX_SPIS2_ENABLED
-#define NRFX_SPIS2_ENABLED 1
-#endif
-
-// NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
-
-// NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// NRFX_SPI0_ENABLED - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// NRFX_SPI1_ENABLED - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-// NRFX_SPI2_ENABLED - Enable SPI2 instance
-
-
-#ifndef NRFX_SPI2_ENABLED
-#define NRFX_SPI2_ENABLED 1
-#endif
-
-// NRFX_SPI_MISO_PULL_CFG - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// NRFX_SPI_CONFIG_LOG_LEVEL - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// NRFX_SPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// NRFX_SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-//
-
-//
// NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
//==========================================================