diff --git a/tinyusb/host/hub.c b/tinyusb/host/hub.c
index fc87ba14..ad14865a 100644
--- a/tinyusb/host/hub.c
+++ b/tinyusb/host/hub.c
@@ -161,12 +161,11 @@ tusb_error_t hub_enumerate_subtask(void)
   OSAL_SUBTASK_INVOKED_AND_WAIT( hub_port_clear_feature_subtask(HUB_FEATURE_PORT_CONNECTION_CHANGE), error );
   SUBTASK_ASSERT_STATUS( error );
 
-  //--------------------------------------------------------------------+
-  // PORT RESET & WAIT FOR STATUS ENDPOINT & GET STATUS & CLEAR RESET CHANGE
-  //--------------------------------------------------------------------+
+  //------------- Port Reset & Get Port Speed -------------//
   OSAL_SUBTASK_INVOKED_AND_WAIT ( hub_port_reset_subtask(), error );
   SUBTASK_ASSERT_STATUS( error );
 
+  // TODO get port speed
   p_port_status = (hub_port_status_response_t *) hub_enum_buffer;
   usbh_devices[0].speed = (p_port_status->status_current.high_speed_device_attached) ? TUSB_SPEED_HIGH :
                           (p_port_status->status_current.low_speed_device_attached ) ? TUSB_SPEED_LOW  : TUSB_SPEED_FULL;
diff --git a/tinyusb/host/usbh.c b/tinyusb/host/usbh.c
index 5b6eeffd..e2b8bde7 100644
--- a/tinyusb/host/usbh.c
+++ b/tinyusb/host/usbh.c
@@ -384,41 +384,11 @@ tusb_error_t enumeration_body_subtask(void)
 //  osal_task_delay(50); // TODO reset is recommended to last 50 ms (NXP EHCI passes this)
   }else
   {
-    hub_port_status_response_t * p_port_status;
-
-    //--------------------------------------------------------------------+
-    // PORT RESET & WAIT FOR STATUS ENDPOINT & GET STATUS & CLEAR RESET CHANGE
-    //--------------------------------------------------------------------+
-    //------------- Set Port Reset -------------//
-    OSAL_SUBTASK_INVOKED_AND_WAIT(
-        usbh_control_xfer_subtask( usbh_devices[0].hub_addr, bm_request_type(TUSB_DIR_HOST_TO_DEV, TUSB_REQUEST_TYPE_CLASS, TUSB_REQUEST_RECIPIENT_OTHER),
-                                   HUB_REQUEST_SET_FEATURE, HUB_FEATURE_PORT_RESET, usbh_devices[0].hub_port,
-                                   0, NULL ),
-        error
-    );
+    OSAL_SUBTASK_INVOKED_AND_WAIT ( hub_port_reset_subtask(), error );
     SUBTASK_ASSERT_STATUS( error );
 
-    osal_task_delay(200); // TODO Hub wait for Status Endpoint on Reset Change
-
-    //------------- Get Port Status to check if port is enabled, powered and reset_change -------------//
-    OSAL_SUBTASK_INVOKED_AND_WAIT(
-        usbh_control_xfer_subtask( usbh_devices[0].hub_addr, bm_request_type(TUSB_DIR_DEV_TO_HOST, TUSB_REQUEST_TYPE_CLASS, TUSB_REQUEST_RECIPIENT_OTHER),
-                                   HUB_REQUEST_GET_STATUS, 0, usbh_devices[0].hub_port,
-                                   4, enum_data_buffer ),
-        error
-    );
-    SUBTASK_ASSERT_STATUS( error );
-
-    p_port_status = (hub_port_status_response_t *) enum_data_buffer;
-    SUBTASK_ASSERT ( p_port_status->status_change.reset && p_port_status->status_current.connect_status &&
-                     p_port_status->status_current.port_power && p_port_status->status_current.port_enable);
-
-    OSAL_SUBTASK_INVOKED_AND_WAIT(
-        usbh_control_xfer_subtask( usbh_devices[0].hub_addr, bm_request_type(TUSB_DIR_HOST_TO_DEV, TUSB_REQUEST_TYPE_CLASS, TUSB_REQUEST_RECIPIENT_OTHER),
-                                   HUB_REQUEST_CLEAR_FEATURE, HUB_FEATURE_PORT_RESET_CHANGE, usbh_devices[0].hub_port,
-                                   0, NULL ),
-        error
-    );
+    // Acknowledge Port Reset Change
+    OSAL_SUBTASK_INVOKED_AND_WAIT( hub_port_clear_feature_subtask(HUB_FEATURE_PORT_RESET_CHANGE), error );
     SUBTASK_ASSERT_STATUS( error );
   }