From 16c8f75637ab593b3eea5b5d11af9be1436b13fd Mon Sep 17 00:00:00 2001 From: Jean Gressmann Date: Sat, 20 Feb 2021 14:38:08 +0100 Subject: [PATCH] Adds support for Microchip SAM E54 Xplained Pro --- docs/boards.md | 1 + hw/bsp/same54xplainedpro/board.mk | 50 ++++ hw/bsp/same54xplainedpro/same54p20a_flash.ld | 163 +++++++++++ hw/bsp/same54xplainedpro/same54p20a_sram.ld | 162 +++++++++++ hw/bsp/same54xplainedpro/same54xplainedpro.c | 274 +++++++++++++++++++ 5 files changed, 650 insertions(+) create mode 100644 hw/bsp/same54xplainedpro/board.mk create mode 100644 hw/bsp/same54xplainedpro/same54p20a_flash.ld create mode 100644 hw/bsp/same54xplainedpro/same54p20a_sram.ld create mode 100644 hw/bsp/same54xplainedpro/same54xplainedpro.c diff --git a/docs/boards.md b/docs/boards.md index 15971f03..bff3f32b 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -41,6 +41,7 @@ This code base already had supported for a handful of following boards (sorted a - [Adafruit PyPortal](https://www.adafruit.com/product/4116) - [Adafruit Metro M4 Express](https://www.adafruit.com/product/3382) - [D5035-01](https://github.com/RudolphRiedel/USB_CAN-FD) +- [Microchip SAME54 Xplained Pro](https://www.microchip.com/developmenttools/productdetails/atsame54-xpro) ### MicroChip SAMG diff --git a/hw/bsp/same54xplainedpro/board.mk b/hw/bsp/same54xplainedpro/board.mk new file mode 100644 index 00000000..645372a2 --- /dev/null +++ b/hw/bsp/same54xplainedpro/board.mk @@ -0,0 +1,50 @@ +CONF_CPU_FREQUENCY ?= 120000000 + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mlong-calls \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__SAME54P20A__ \ + -DCONF_CPU_FREQUENCY=$(CONF_CPU_FREQUENCY) \ + -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ + + + +# -DSVC_Handler=SVCall_Handler + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/same54p20a_flash.ld + +SRC_C += \ + hw/mcu/microchip/asf4/same54/gcc/gcc/startup_same54.c \ + hw/mcu/microchip/asf4/same54/gcc/system_same54.c \ + hw/mcu/microchip/asf4/same54/hal/utils/src/utils_syscalls.c + +INC += \ + $(TOP)/hw/mcu/microchip/asf4/same54/ \ + $(TOP)/hw/mcu/microchip/asf4/same54/config \ + $(TOP)/hw/mcu/microchip/asf4/same54/include \ + $(TOP)/hw/mcu/microchip/asf4/same54/hal/include \ + $(TOP)/hw/mcu/microchip/asf4/same54/hal/utils/include \ + $(TOP)/hw/mcu/microchip/asf4/same54/hpl/port \ + $(TOP)/hw/mcu/microchip/asf4/same54/hri \ + $(TOP)/hw/mcu/microchip/asf4/same54/CMSIS/Include + +# For TinyUSB port source +VENDOR = microchip +CHIP_FAMILY = samd + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + + +# For flash-jlink target +JLINK_DEVICE = ATSAME54P20 + +# flash using edbg from https://github.com/ataradov/edbg +flash: $(BUILD)/$(PROJECT).bin + edbg --verbose -t same54 -pv -f $< diff --git a/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/hw/bsp/same54xplainedpro/same54p20a_flash.ld new file mode 100644 index 00000000..97072bfe --- /dev/null +++ b/hw/bsp/same54xplainedpro/same54p20a_flash.ld @@ -0,0 +1,163 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/hw/bsp/same54xplainedpro/same54p20a_sram.ld new file mode 100644 index 00000000..6219f4af --- /dev/null +++ b/hw/bsp/same54xplainedpro/same54p20a_sram.ld @@ -0,0 +1,162 @@ +/** + * \file + * + * \brief Linker script for running in internal SRAM on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > ram + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > ram + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/same54xplainedpro/same54xplainedpro.c b/hw/bsp/same54xplainedpro/same54xplainedpro.c new file mode 100644 index 00000000..a176c02f --- /dev/null +++ b/hw/bsp/same54xplainedpro/same54xplainedpro.c @@ -0,0 +1,274 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Jean Gressmann + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include +#include "bsp/board.h" + +#include + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_0_Handler(void) +{ + tud_int_handler(0); +} + +void USB_1_Handler(void) +{ + tud_int_handler(0); +} + +void USB_2_Handler(void) +{ + tud_int_handler(0); +} + +void USB_3_Handler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define LED_PIN PIN_PC18 +#define BUTTON_PIN PIN_PB31 +#define BOARD_SERCOM SERCOM2 +#define BOARD_NAME "Microchip SAM E54 Xplained Pro" + +static inline void init_clock(void) +{ + /* configure for a 12MHz crystal connected to XIN1/XOUT1 */ + OSCCTRL->XOSCCTRL[1].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(5) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 12 = 1Mhz, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000)-1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(5) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 12 = 1Mhz, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ + + /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ + GCLK->GENCTRL[0].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ + GCLK->GENCTRL[1].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL1 | + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ +} + +static inline void uart_init(void) +{ + gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); + gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); + + MCLK->APBBMASK.bit.SERCOM2_ = 1; + GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK1 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK1 -> 48MHz */ + + BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); + + BOARD_SERCOM->USART.CTRLA.reg = + SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ + SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ + SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ + SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ + // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ + BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ + + BOARD_SERCOM->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +} + +static inline void uart_send_buffer(uint8_t const *text, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM->USART.DATA.reg = text[i]; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) +{ + while (*text) { + BOARD_SERCOM->USART.DATA.reg = *text++; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); + } +} + + +void board_init(void) +{ + init_clock(); + + SystemCoreClock = CONF_CPU_FREQUENCY; + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + uart_init(); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " UART initialized\n"); + tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); +#endif + + // LED0 init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(LED_PIN, 0); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " LED pin configured\n"); +#endif + + // BTN0 init + gpio_set_pin_function(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " Button pin configured\n"); +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + +#if TUSB_OPT_DEVICE_ENABLED +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device enabled\n"); +#endif + + /* USB clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. + */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB pin init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); + + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device configured\n"); +#endif +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + if (len < 0) { + uart_send_str(buf); + } else { + uart_send_buffer(buf, len); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +}