diff --git a/demos/bsp/boards/embedded_artists/board_ea4357.c b/demos/bsp/boards/embedded_artists/board_ea4357.c
index 361d3a72..97e2ff94 100644
--- a/demos/bsp/boards/embedded_artists/board_ea4357.c
+++ b/demos/bsp/boards/embedded_artists/board_ea4357.c
@@ -56,7 +56,6 @@ void board_init(void)
   scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7);		// USB0 VBus Power
   
   // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
-  scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2);	// USB1_VBUS monitor presence, must be high for bus reset occur
 
   // init I2C and set up MIC2555 to have 15k pull-down on USB1 D+ & D-
   I2C_Init(LPC_I2C0, 100000);
diff --git a/demos/bsp/boards/keil/board_mcb4300.c b/demos/bsp/boards/keil/board_mcb4300.c
index 7bfcb5cb..6126dac5 100644
--- a/demos/bsp/boards/keil/board_mcb4300.c
+++ b/demos/bsp/boards/keil/board_mcb4300.c
@@ -77,14 +77,13 @@ void board_init(void)
   SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
 
   //------------- USB Bus power HOST ONLY-------------//
-  //scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1);     		// P6_3 USB0_PWR_EN, USB0 VBus function
-  // Keil VBUS0 on schematic is F1
-
+  // Keil VBUS0 is P6_3
+  scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1);     		// P6_3 USB0_PWR_EN, USB0 VBus function
 
   // TODO USB1 P2_5
-  scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2);	// USB1_VBUS monitor presence, must be high for bus reset occur
-  //scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2);				// P9_5 USB1_PWR_EN, USB1 VBus function
-  // Keil VBUS1 on schematics is P2_5
+
+  // Keil VBUS1 is P9_5
+  scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2);				// P9_5 USB1_PWR_EN, USB1 VBus function
 
   //------------- LEDs init, J21 must be installed -------------//
   for(uint32_t i=0; i<BOARD_MAX_LEDS; i++)
diff --git a/demos/bsp/boards/keil/board_mcb4300.h b/demos/bsp/boards/keil/board_mcb4300.h
index b37755a2..a3387836 100644
--- a/demos/bsp/boards/keil/board_mcb4300.h
+++ b/demos/bsp/boards/keil/board_mcb4300.h
@@ -56,7 +56,7 @@
  extern "C" {
 #endif
 
-#define CFG_PRINTF_TARGET       PRINTF_TARGET_UART
+#define CFG_PRINTF_TARGET       PRINTF_TARGET_DEBUG_CONSOLE
 
 
 #ifdef __cplusplus
diff --git a/demos/bsp/boards/ngx/board_ngx4330.c b/demos/bsp/boards/ngx/board_ngx4330.c
index d41d9895..620393d2 100644
--- a/demos/bsp/boards/ngx/board_ngx4330.c
+++ b/demos/bsp/boards/ngx/board_ngx4330.c
@@ -55,7 +55,6 @@ void board_init(void)
 	//------------- USB Bus power HOST ONLY-------------//
 	scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4);	// P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
 
-	scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2);	// USB1_VBUS monitor presence, must be high for bus reset occur
 	scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
 	GPIO_SetDir   (5, BIT_(6), 1);              // GPIO5[6] is output
 	GPIO_SetValue (5, BIT_(6));                 // GPIO5[6] output high
diff --git a/demos/host/host_os_none/.cproject b/demos/host/host_os_none/.cproject
index 0ddc27c3..98e1c28e 100644
--- a/demos/host/host_os_none/.cproject
+++ b/demos/host/host_os_none/.cproject
@@ -1180,7 +1180,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.1825587478" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.916077707" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1015545513" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1015545513" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.409118044" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
 								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.388300407" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
@@ -2288,7 +2288,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.495921515" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.692268551" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1209404346" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1209404346" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.1664439954" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
 								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1521825863" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
diff --git a/demos/host/src/tusb_config.h b/demos/host/src/tusb_config.h
index 47643a67..48275bdb 100644
--- a/demos/host/src/tusb_config.h
+++ b/demos/host/src/tusb_config.h
@@ -60,7 +60,7 @@
 // CONTROLLER CONFIGURATION
 //--------------------------------------------------------------------+
 #define TUSB_CFG_CONTROLLER0_MODE  (TUSB_MODE_HOST)
-#define TUSB_CFG_CONTROLLER1_MODE  (TUSB_MODE_NONE)
+#define TUSB_CFG_CONTROLLER1_MODE  (TUSB_MODE_HOST)
 
 //--------------------------------------------------------------------+
 // HOST CONFIGURATION
diff --git a/tinyusb/hal/hal_lpc43xx.c b/tinyusb/hal/hal_lpc43xx.c
index 0cdf0d72..320be6fd 100644
--- a/tinyusb/hal/hal_lpc43xx.c
+++ b/tinyusb/hal/hal_lpc43xx.c
@@ -77,6 +77,8 @@ tusb_error_t hal_init(void)
 
   //------------- USB1 Clock, only use on-chip FS PHY -------------//
 #if TUSB_CFG_CONTROLLER1_MODE
+  scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2);	// USB1_VBUS monitor presence, must be high for bus reset occur
+
   /* connect CLK_USB1 to 60 MHz clock */
   CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_USB1); /* FIXME Run base BASE_USB1_CLK clock from PLL1 (assume PLL1 is 60 MHz, no division required) */
   //LPC_CREG->CREG0 &= ~(1<<5); /* Turn on the phy */