diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk
index 7e01de2b..893c8500 100644
--- a/hw/bsp/nutiny_nuc121s/board.mk
+++ b/hw/bsp/nutiny_nuc121s/board.mk
@@ -51,8 +51,7 @@ FREERTOS_PORT = ARM_CM0
 JLINK_DEVICE = NUC121SC2AE
 JLINK_IF = swd
 
-
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source
 flash: $(BUILD)/$(BOARD)-firmware.elf
-	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< verify reset exit"
+	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"
diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk
index d563db5e..e2eecff1 100644
--- a/hw/bsp/nutiny_nuc125s/board.mk
+++ b/hw/bsp/nutiny_nuc125s/board.mk
@@ -38,4 +38,4 @@ JLINK_IF = swd
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source
 flash: $(BUILD)/$(BOARD)-firmware.elf
-	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< verify reset exit"
+	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"
diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk
index 1edf4a63..cc88b552 100644
--- a/hw/bsp/nutiny_nuc126v/board.mk
+++ b/hw/bsp/nutiny_nuc126v/board.mk
@@ -58,4 +58,4 @@ JLINK_IF = swd
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source
 flash: $(BUILD)/$(BOARD)-firmware.elf
-	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< verify reset exit"
+	openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"