/***********************************************************************
* $Id:: mw_usbd_msc.h 197 2011-06-12 20:22:41Z usb06052                       $
*
* Project: USB device ROM Stack
*
* Description:
*     Mass Storage Class definitions.
*
***********************************************************************
*   Copyright(C) 2011, NXP Semiconductor
*   All rights reserved.
*
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/

#ifndef __MSC_H__
#define __MSC_H__

#include "mw_usbd.h"

/** \file
 *  \brief Mass Storage calss (MSC) descriptors.
 *
 *  Definition of MSC class descriptors and their bit defines.
 *
 */

/* MSC Subclass Codes */
#define MSC_SUBCLASS_RBC                0x01
#define MSC_SUBCLASS_SFF8020I_MMC2      0x02
#define MSC_SUBCLASS_QIC157             0x03
#define MSC_SUBCLASS_UFI                0x04
#define MSC_SUBCLASS_SFF8070I           0x05
#define MSC_SUBCLASS_SCSI               0x06

/* MSC Protocol Codes */
#define MSC_PROTOCOL_CBI_INT            0x00
#define MSC_PROTOCOL_CBI_NOINT          0x01
#define MSC_PROTOCOL_BULK_ONLY          0x50


/* MSC Request Codes */
#define MSC_REQUEST_RESET               0xFF
#define MSC_REQUEST_GET_MAX_LUN         0xFE


/* MSC Bulk-only Stage */
#define MSC_BS_CBW                      0       /* Command Block Wrapper */
#define MSC_BS_DATA_OUT                 1       /* Data Out Phase */
#define MSC_BS_DATA_IN                  2       /* Data In Phase */
#define MSC_BS_DATA_IN_LAST             3       /* Data In Last Phase */
#define MSC_BS_DATA_IN_LAST_STALL       4       /* Data In Last Phase with Stall */
#define MSC_BS_CSW                      5       /* Command Status Wrapper */
#define MSC_BS_ERROR                    6       /* Error */


/* Bulk-only Command Block Wrapper */
PRE_PACK struct POST_PACK _MSC_CBW
{
  uint32_t dSignature;
  uint32_t dTag;
  uint32_t dDataLength;
  uint8_t  bmFlags;
  uint8_t  bLUN;
  uint8_t  bCBLength;
  uint8_t  CB[16];
} ;
typedef struct _MSC_CBW MSC_CBW;

/* Bulk-only Command Status Wrapper */
PRE_PACK struct POST_PACK _MSC_CSW
{
  uint32_t dSignature;
  uint32_t dTag;
  uint32_t dDataResidue;
  uint8_t  bStatus;
} ;
typedef struct _MSC_CSW MSC_CSW;

#define MSC_CBW_Signature               0x43425355
#define MSC_CSW_Signature               0x53425355


/* CSW Status Definitions */
#define CSW_CMD_PASSED                  0x00
#define CSW_CMD_FAILED                  0x01
#define CSW_PHASE_ERROR                 0x02


/* SCSI Commands */
#define SCSI_TEST_UNIT_READY            0x00
#define SCSI_REQUEST_SENSE              0x03
#define SCSI_FORMAT_UNIT                0x04
#define SCSI_INQUIRY                    0x12
#define SCSI_MODE_SELECT6               0x15
#define SCSI_MODE_SENSE6                0x1A
#define SCSI_START_STOP_UNIT            0x1B
#define SCSI_MEDIA_REMOVAL              0x1E
#define SCSI_READ_FORMAT_CAPACITIES     0x23
#define SCSI_READ_CAPACITY              0x25
#define SCSI_READ10                     0x28
#define SCSI_WRITE10                    0x2A
#define SCSI_VERIFY10                   0x2F
#define SCSI_READ12                     0xA8
#define SCSI_WRITE12                    0xAA
#define SCSI_MODE_SELECT10              0x55
#define SCSI_MODE_SENSE10               0x5A


#endif  /* __MSC_H__ */