From d415bd4d7b144f470b8d1c12284abb161ac4dd5f Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 8 Nov 2021 17:39:37 +0700 Subject: [PATCH] add missing musb type file --- src/portable/mentor/musb/musb_type.h | 2624 ++++++++++++++++++++++++++ 1 file changed, 2624 insertions(+) create mode 100644 src/portable/mentor/musb/musb_type.h diff --git a/src/portable/mentor/musb/musb_type.h b/src/portable/mentor/musb/musb_type.h new file mode 100644 index 000000000..8f83305a5 --- /dev/null +++ b/src/portable/mentor/musb/musb_type.h @@ -0,0 +1,2624 @@ +/****************************************************************************** +* +* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*******************************************************************************/ + +#ifndef _TUSB_MUSB_TYPE_H_ +#define _TUSB_MUSB_TYPE_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FADDR register. +// +//***************************************************************************** +#define USB_FADDR_M 0x0000007F // Function Address +#define USB_FADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_POWER register. +// +//***************************************************************************** +#define USB_POWER_ISOUP 0x00000080 // Isochronous Update +#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect +#define USB_POWER_HSENAB 0x00000020 // High Speed Enable +#define USB_POWER_HSMODE 0x00000010 // High Speed Enable +#define USB_POWER_RESET 0x00000008 // RESET Signaling +#define USB_POWER_RESUME 0x00000004 // RESUME Signaling +#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode +#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIS register. +// +//***************************************************************************** +#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt +#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt +#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt +#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt +#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt +#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt +#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt +#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIS register. +// +//***************************************************************************** +#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt +#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt +#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt +#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt +#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt +#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt +#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIE register. +// +//***************************************************************************** +#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable +#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable +#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable +#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable +#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable +#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable +#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable +#define USB_TXIE_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIE register. +// +//***************************************************************************** +#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable +#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable +#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable +#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable +#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable +#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable +#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IS register. +// +//***************************************************************************** +#define USB_IS_VBUSERR 0x00000080 // VBUS Error (OTG only) +#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST (OTG only) +#define USB_IS_DISCON 0x00000020 // Session Disconnect (OTG only) +#define USB_IS_CONN 0x00000010 // Session Connect +#define USB_IS_SOF 0x00000008 // Start of Frame +#define USB_IS_BABBLE 0x00000004 // Babble Detected +#define USB_IS_RESET 0x00000004 // RESET Signaling Detected +#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected +#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IE register. +// +//***************************************************************************** +#define USB_IE_VBUSERR 0x00000080 // Enable VBUS Error Interrupt (OTG + // only) +#define USB_IE_SESREQ 0x00000040 // Enable Session Request (OTG + // only) +#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt +#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt +#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt +#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt +#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt +#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt +#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FRAME register. +// +//***************************************************************************** +#define USB_FRAME_M 0x000007FF // Frame Number +#define USB_FRAME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPIDX register. +// +//***************************************************************************** +#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index +#define USB_EPIDX_EPIDX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TEST register. +// +//***************************************************************************** +#define USB_TEST_FORCEH 0x00000080 // Force Host Mode +#define USB_TEST_FIFOACC 0x00000040 // FIFO Access +#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode +#define USB_TEST_FORCEHS 0x00000010 // Force High-Speed Mode +#define USB_TEST_TESTPKT 0x00000008 // Test Packet Mode Enable +#define USB_TEST_TESTK 0x00000004 // Test_K Mode Enable +#define USB_TEST_TESTJ 0x00000002 // Test_J Mode Enable +#define USB_TEST_TESTSE0NAK 0x00000001 // Test_SE0_NAK Test Mode Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO0 register. +// +//***************************************************************************** +#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO0_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO1 register. +// +//***************************************************************************** +#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO1_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO2 register. +// +//***************************************************************************** +#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO2_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO3 register. +// +//***************************************************************************** +#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO3_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO4 register. +// +//***************************************************************************** +#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO4_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO5 register. +// +//***************************************************************************** +#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO5_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO6 register. +// +//***************************************************************************** +#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO6_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO7 register. +// +//***************************************************************************** +#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO7_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DEVCTL register. +// +//***************************************************************************** +#define USB_DEVCTL_DEV 0x00000080 // Device Mode (OTG only) +#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected +#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected +#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level (OTG only) +#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd +#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid +#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid +#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid +#define USB_DEVCTL_HOST 0x00000004 // Host Mode +#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request (OTG only) +#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End (OTG only) + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CCONF register. +// +//***************************************************************************** +#define USB_CCONF_TXEDMA 0x00000002 // TX Early DMA Enable +#define USB_CCONF_RXEDMA 0x00000001 // TX Early DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOSZ register. +// +//***************************************************************************** +#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOSZ register. +// +//***************************************************************************** +#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOADD +// register. +// +//***************************************************************************** +#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_TXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOADD +// register. +// +//***************************************************************************** +#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_RXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIVBUSCTL +// register. +// +//***************************************************************************** +#define USB_ULPIVBUSCTL_USEEXTVBUSIND \ + 0x00000002 // Use External VBUS Indicator +#define USB_ULPIVBUSCTL_USEEXTVBUS \ + 0x00000001 // Use External VBUS + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIREGDATA +// register. +// +//***************************************************************************** +#define USB_ULPIREGDATA_REGDATA_M \ + 0x000000FF // Register Data +#define USB_ULPIREGDATA_REGDATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIREGADDR +// register. +// +//***************************************************************************** +#define USB_ULPIREGADDR_ADDR_M 0x000000FF // Register Address +#define USB_ULPIREGADDR_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIREGCTL +// register. +// +//***************************************************************************** +#define USB_ULPIREGCTL_RDWR 0x00000004 // Read/Write Control +#define USB_ULPIREGCTL_REGCMPLT 0x00000002 // Register Access Complete +#define USB_ULPIREGCTL_REGACC 0x00000001 // Initiate Register Access + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPINFO register. +// +//***************************************************************************** +#define USB_EPINFO_RXEP_M 0x000000F0 // RX Endpoints +#define USB_EPINFO_TXEP_M 0x0000000F // TX Endpoints +#define USB_EPINFO_RXEP_S 4 +#define USB_EPINFO_TXEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RAMINFO register. +// +//***************************************************************************** +#define USB_RAMINFO_DMACHAN_M 0x000000F0 // DMA Channels +#define USB_RAMINFO_RAMBITS_M 0x0000000F // RAM Address Bus Width +#define USB_RAMINFO_DMACHAN_S 4 +#define USB_RAMINFO_RAMBITS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CONTIM register. +// +//***************************************************************************** +#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait +#define USB_CONTIM_WTID_M 0x0000000F // Wait ID +#define USB_CONTIM_WTCON_S 4 +#define USB_CONTIM_WTID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VPLEN register. +// +//***************************************************************************** +#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length +#define USB_VPLEN_VPLEN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_HSEOF register. +// +//***************************************************************************** +#define USB_HSEOF_HSEOFG_M 0x000000FF // HIgh-Speed End-of-Frame Gap +#define USB_HSEOF_HSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FSEOF register. +// +//***************************************************************************** +#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap +#define USB_FSEOF_FSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LSEOF register. +// +//***************************************************************************** +#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap +#define USB_LSEOF_LSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR0 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR0 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT0 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT0_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRL0 register. +// +//***************************************************************************** +#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout +#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear +#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet +#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear +#define USB_CSRL0_REQPKT 0x00000020 // Request Packet +#define USB_CSRL0_STALL 0x00000020 // Send Stall +#define USB_CSRL0_SETEND 0x00000010 // Setup End +#define USB_CSRL0_ERROR 0x00000010 // Error +#define USB_CSRL0_DATAEND 0x00000008 // Data End +#define USB_CSRL0_SETUP 0x00000008 // Setup Packet +#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled +#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready +#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRH0 register. +// +//***************************************************************************** +#define USB_CSRH0_DISPING 0x00000008 // PING Disable +#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_CSRH0_DT 0x00000002 // Data Toggle +#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_COUNT0 register. +// +//***************************************************************************** +#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count +#define USB_COUNT0_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TYPE0 register. +// +//***************************************************************************** +#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed +#define USB_TYPE0_SPEED_HIGH 0x00000040 // High +#define USB_TYPE0_SPEED_FULL 0x00000080 // Full +#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_NAKLMT register. +// +//***************************************************************************** +#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit +#define USB_NAKLMT_NAKLMT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP1 register. +// +//***************************************************************************** +#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL1 register. +// +//***************************************************************************** +#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL1_STALL 0x00000010 // Send STALL +#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL1_ERROR 0x00000004 // Error +#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH1 register. +// +//***************************************************************************** +#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH1_MODE 0x00000020 // Mode +#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH1_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP1 register. +// +//***************************************************************************** +#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL1 register. +// +//***************************************************************************** +#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL1_STALL 0x00000020 // Send STALL +#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL1_OVER 0x00000004 // Overrun +#define USB_RXCSRL1_ERROR 0x00000004 // Error +#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH1 register. +// +//***************************************************************************** +#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH1_DT 0x00000002 // Data Toggle +#define USB_RXCSRH1_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT1 register. +// +//***************************************************************************** +#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT1_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE1 register. +// +//***************************************************************************** +#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE1_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL1_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL1_TXPOLL_S \ + 0 +#define USB_TXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE1 register. +// +//***************************************************************************** +#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE1_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL1_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL1_TXPOLL_S \ + 0 +#define USB_RXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP2 register. +// +//***************************************************************************** +#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL2 register. +// +//***************************************************************************** +#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL2_STALL 0x00000010 // Send STALL +#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL2_ERROR 0x00000004 // Error +#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH2 register. +// +//***************************************************************************** +#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH2_MODE 0x00000020 // Mode +#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH2_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP2 register. +// +//***************************************************************************** +#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL2 register. +// +//***************************************************************************** +#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL2_STALL 0x00000020 // Send STALL +#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL2_ERROR 0x00000004 // Error +#define USB_RXCSRL2_OVER 0x00000004 // Overrun +#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH2 register. +// +//***************************************************************************** +#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH2_DT 0x00000002 // Data Toggle +#define USB_RXCSRH2_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT2 register. +// +//***************************************************************************** +#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT2_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE2 register. +// +//***************************************************************************** +#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE2_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL2_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL2_NAKLMT_S \ + 0 +#define USB_TXINTERVAL2_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE2 register. +// +//***************************************************************************** +#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE2_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL2_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL2_TXPOLL_S \ + 0 +#define USB_RXINTERVAL2_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP3 register. +// +//***************************************************************************** +#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL3 register. +// +//***************************************************************************** +#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL3_STALL 0x00000010 // Send STALL +#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL3_ERROR 0x00000004 // Error +#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH3 register. +// +//***************************************************************************** +#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH3_MODE 0x00000020 // Mode +#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH3_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP3 register. +// +//***************************************************************************** +#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL3 register. +// +//***************************************************************************** +#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL3_STALL 0x00000020 // Send STALL +#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL3_ERROR 0x00000004 // Error +#define USB_RXCSRL3_OVER 0x00000004 // Overrun +#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH3 register. +// +//***************************************************************************** +#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH3_DT 0x00000002 // Data Toggle +#define USB_RXCSRH3_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT3 register. +// +//***************************************************************************** +#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT3_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE3 register. +// +//***************************************************************************** +#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE3_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL3_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL3_TXPOLL_S \ + 0 +#define USB_TXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE3 register. +// +//***************************************************************************** +#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE3_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL3_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL3_TXPOLL_S \ + 0 +#define USB_RXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP4 register. +// +//***************************************************************************** +#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL4 register. +// +//***************************************************************************** +#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL4_STALL 0x00000010 // Send STALL +#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL4_ERROR 0x00000004 // Error +#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH4 register. +// +//***************************************************************************** +#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH4_MODE 0x00000020 // Mode +#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH4_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP4 register. +// +//***************************************************************************** +#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL4 register. +// +//***************************************************************************** +#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL4_STALL 0x00000020 // Send STALL +#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL4_OVER 0x00000004 // Overrun +#define USB_RXCSRL4_ERROR 0x00000004 // Error +#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH4 register. +// +//***************************************************************************** +#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH4_DT 0x00000002 // Data Toggle +#define USB_RXCSRH4_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT4 register. +// +//***************************************************************************** +#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE4 register. +// +//***************************************************************************** +#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE4_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL4_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL4_NAKLMT_S \ + 0 +#define USB_TXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE4 register. +// +//***************************************************************************** +#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE4_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL4_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL4_NAKLMT_S \ + 0 +#define USB_RXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP5 register. +// +//***************************************************************************** +#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL5 register. +// +//***************************************************************************** +#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL5_STALL 0x00000010 // Send STALL +#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL5_ERROR 0x00000004 // Error +#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH5 register. +// +//***************************************************************************** +#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH5_MODE 0x00000020 // Mode +#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH5_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP5 register. +// +//***************************************************************************** +#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL5 register. +// +//***************************************************************************** +#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL5_STALL 0x00000020 // Send STALL +#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL5_ERROR 0x00000004 // Error +#define USB_RXCSRL5_OVER 0x00000004 // Overrun +#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH5 register. +// +//***************************************************************************** +#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH5_DT 0x00000002 // Data Toggle +#define USB_RXCSRH5_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT5 register. +// +//***************************************************************************** +#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE5 register. +// +//***************************************************************************** +#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE5_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL5_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL5_NAKLMT_S \ + 0 +#define USB_TXINTERVAL5_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE5 register. +// +//***************************************************************************** +#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE5_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL5_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL5_TXPOLL_S \ + 0 +#define USB_RXINTERVAL5_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP6 register. +// +//***************************************************************************** +#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL6 register. +// +//***************************************************************************** +#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL6_STALL 0x00000010 // Send STALL +#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL6_ERROR 0x00000004 // Error +#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH6 register. +// +//***************************************************************************** +#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH6_MODE 0x00000020 // Mode +#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH6_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP6 register. +// +//***************************************************************************** +#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL6 register. +// +//***************************************************************************** +#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL6_STALL 0x00000020 // Send STALL +#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL6_ERROR 0x00000004 // Error +#define USB_RXCSRL6_OVER 0x00000004 // Overrun +#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH6 register. +// +//***************************************************************************** +#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH6_DT 0x00000002 // Data Toggle +#define USB_RXCSRH6_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT6 register. +// +//***************************************************************************** +#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE6 register. +// +//***************************************************************************** +#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE6_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL6_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL6_TXPOLL_S \ + 0 +#define USB_TXINTERVAL6_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE6 register. +// +//***************************************************************************** +#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE6_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL6_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL6_NAKLMT_S \ + 0 +#define USB_RXINTERVAL6_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP7 register. +// +//***************************************************************************** +#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL7 register. +// +//***************************************************************************** +#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL7_STALL 0x00000010 // Send STALL +#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL7_ERROR 0x00000004 // Error +#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH7 register. +// +//***************************************************************************** +#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH7_MODE 0x00000020 // Mode +#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH7_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP7 register. +// +//***************************************************************************** +#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL7 register. +// +//***************************************************************************** +#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL7_STALL 0x00000020 // Send STALL +#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL7_ERROR 0x00000004 // Error +#define USB_RXCSRL7_OVER 0x00000004 // Overrun +#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH7 register. +// +//***************************************************************************** +#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH7_DT 0x00000002 // Data Toggle +#define USB_RXCSRH7_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT7 register. +// +//***************************************************************************** +#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE7 register. +// +//***************************************************************************** +#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE7_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL7_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL7_NAKLMT_S \ + 0 +#define USB_TXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE7 register. +// +//***************************************************************************** +#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE7_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL7_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL7_NAKLMT_S \ + 0 +#define USB_RXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAINTR register. +// +//***************************************************************************** +#define USB_DMAINTR_CH7 0x00000080 // Channel 7 DMA Interrupt +#define USB_DMAINTR_CH6 0x00000040 // Channel 6 DMA Interrupt +#define USB_DMAINTR_CH5 0x00000020 // Channel 5 DMA Interrupt +#define USB_DMAINTR_CH4 0x00000010 // Channel 4 DMA Interrupt +#define USB_DMAINTR_CH3 0x00000008 // Channel 3 DMA Interrupt +#define USB_DMAINTR_CH2 0x00000004 // Channel 2 DMA Interrupt +#define USB_DMAINTR_CH1 0x00000002 // Channel 1 DMA Interrupt +#define USB_DMAINTR_CH0 0x00000001 // Channel 0 DMA Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL0 register. +// +//***************************************************************************** +#define USB_DMACTL0_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL0_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL0_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL0_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL0_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL0_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL0_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL0_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL0_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL0_DIR 0x00000002 // DMA Direction +#define USB_DMACTL0_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL0_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR0 register. +// +//***************************************************************************** +#define USB_DMAADDR0_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR0_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT0 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT0_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT0_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL1 register. +// +//***************************************************************************** +#define USB_DMACTL1_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL1_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL1_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL1_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL1_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL1_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL1_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL1_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL1_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL1_DIR 0x00000002 // DMA Direction +#define USB_DMACTL1_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL1_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR1 register. +// +//***************************************************************************** +#define USB_DMAADDR1_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR1_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT1 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT1_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT1_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL2 register. +// +//***************************************************************************** +#define USB_DMACTL2_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL2_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL2_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL2_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL2_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL2_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL2_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL2_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL2_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL2_DIR 0x00000002 // DMA Direction +#define USB_DMACTL2_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL2_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR2 register. +// +//***************************************************************************** +#define USB_DMAADDR2_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR2_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT2 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT2_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT2_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL3 register. +// +//***************************************************************************** +#define USB_DMACTL3_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL3_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL3_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL3_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL3_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL3_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL3_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL3_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL3_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL3_DIR 0x00000002 // DMA Direction +#define USB_DMACTL3_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL3_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR3 register. +// +//***************************************************************************** +#define USB_DMAADDR3_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR3_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT3 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT3_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT3_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL4 register. +// +//***************************************************************************** +#define USB_DMACTL4_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL4_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL4_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL4_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL4_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL4_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL4_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL4_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL4_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL4_DIR 0x00000002 // DMA Direction +#define USB_DMACTL4_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL4_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR4 register. +// +//***************************************************************************** +#define USB_DMAADDR4_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR4_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT4 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT4_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT4_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL5 register. +// +//***************************************************************************** +#define USB_DMACTL5_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL5_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL5_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL5_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL5_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL5_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL5_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL5_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL5_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL5_DIR 0x00000002 // DMA Direction +#define USB_DMACTL5_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL5_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR5 register. +// +//***************************************************************************** +#define USB_DMAADDR5_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR5_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT5 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT5_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT5_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL6 register. +// +//***************************************************************************** +#define USB_DMACTL6_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL6_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL6_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL6_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL6_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL6_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL6_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL6_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL6_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL6_DIR 0x00000002 // DMA Direction +#define USB_DMACTL6_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL6_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR6 register. +// +//***************************************************************************** +#define USB_DMAADDR6_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR6_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT6 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT6_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT6_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL7 register. +// +//***************************************************************************** +#define USB_DMACTL7_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL7_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL7_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL7_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL7_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL7_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL7_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL7_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL7_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL7_DIR 0x00000002 // DMA Direction +#define USB_DMACTL7_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL7_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR7 register. +// +//***************************************************************************** +#define USB_DMAADDR7_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR7_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT7 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT7_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT7_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT2_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT3_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_RXDPKTBUFDIS_EP7 0x00000080 // EP7 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP6 0x00000040 // EP6 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP5 0x00000020 // EP5 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP4 0x00000010 // EP4 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP3 0x00000008 // EP3 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP2 0x00000004 // EP2 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP1 0x00000002 // EP1 RX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_TXDPKTBUFDIS_EP7 0x00000080 // EP7 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP6 0x00000040 // EP6 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP5 0x00000020 // EP5 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP4 0x00000010 // EP4 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP3 0x00000008 // EP3 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP2 0x00000004 // EP2 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP1 0x00000002 // EP1 TX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CTO register. +// +//***************************************************************************** +#define USB_CTO_CCTV_M 0x0000FFFF // Configurable Chirp Timeout Value +#define USB_CTO_CCTV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_HHSRTN register. +// +//***************************************************************************** +#define USB_HHSRTN_HHSRTN_M 0x0000FFFF // HIgh Speed to UTM Operating + // Delay +#define USB_HHSRTN_HHSRTN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_HSBT register. +// +//***************************************************************************** +#define USB_HSBT_HSBT_M 0x0000000F // High Speed Timeout Adder +#define USB_HSBT_HSBT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMATTR register. +// +//***************************************************************************** +#define USB_LPMATTR_ENDPT_M 0x0000F000 // Endpoint +#define USB_LPMATTR_RMTWAK 0x00000100 // Remote Wake +#define USB_LPMATTR_HIRD_M 0x000000F0 // Host Initiated Resume Duration +#define USB_LPMATTR_LS_M 0x0000000F // Link State +#define USB_LPMATTR_LS_L1 0x00000001 // Sleep State (L1) +#define USB_LPMATTR_ENDPT_S 12 +#define USB_LPMATTR_HIRD_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMCNTRL register. +// +//***************************************************************************** +#define USB_LPMCNTRL_NAK 0x00000010 // LPM NAK +#define USB_LPMCNTRL_EN_M 0x0000000C // LPM Enable +#define USB_LPMCNTRL_EN_NONE 0x00000000 // LPM and Extended transactions + // are not supported. In this case, + // the USB does not respond to LPM + // transactions and LPM + // transactions cause a timeout +#define USB_LPMCNTRL_EN_EXT 0x00000004 // LPM is not supported but + // extended transactions are + // supported. In this case, the USB + // does respond to an LPM + // transaction with a STALL +#define USB_LPMCNTRL_EN_LPMEXT 0x0000000C // The USB supports LPM extended + // transactions. In this case, the + // USB responds with a NYET or an + // ACK as determined by the value + // of TXLPM and other conditions +#define USB_LPMCNTRL_RES 0x00000002 // LPM Resume +#define USB_LPMCNTRL_TXLPM 0x00000001 // Transmit LPM Transaction Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMIM register. +// +//***************************************************************************** +#define USB_LPMIM_ERR 0x00000020 // LPM Error Interrupt Mask +#define USB_LPMIM_RES 0x00000010 // LPM Resume Interrupt Mask +#define USB_LPMIM_NC 0x00000008 // LPM NC Interrupt Mask +#define USB_LPMIM_ACK 0x00000004 // LPM ACK Interrupt Mask +#define USB_LPMIM_NY 0x00000002 // LPM NY Interrupt Mask +#define USB_LPMIM_STALL 0x00000001 // LPM STALL Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMRIS register. +// +//***************************************************************************** +#define USB_LPMRIS_ERR 0x00000020 // LPM Interrupt Status +#define USB_LPMRIS_RES 0x00000010 // LPM Resume Interrupt Status +#define USB_LPMRIS_NC 0x00000008 // LPM NC Interrupt Status +#define USB_LPMRIS_ACK 0x00000004 // LPM ACK Interrupt Status +#define USB_LPMRIS_NY 0x00000002 // LPM NY Interrupt Status +#define USB_LPMRIS_LPMST 0x00000001 // LPM STALL Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMFADDR register. +// +//***************************************************************************** +#define USB_LPMFADDR_ADDR_M 0x0000007F // LPM Function Address +#define USB_LPMFADDR_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPC register. +// +//***************************************************************************** +#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action +#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged +#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate +#define USB_EPC_PFLTACT_LOW 0x00000200 // Low +#define USB_EPC_PFLTACT_HIGH 0x00000300 // High +#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable +#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense +#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable +#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable +#define USB_EPC_EPEN_M 0x00000003 // External Power Supply Enable + // Configuration +#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low +#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High +#define USB_EPC_EPEN_VBLOW 0x00000002 // Power Enable High if VBUS Low + // (OTG only) +#define USB_EPC_EPEN_VBHIGH 0x00000003 // Power Enable High if VBUS High + // (OTG only) + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCRIS register. +// +//***************************************************************************** +#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCIM register. +// +//***************************************************************************** +#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCISC register. +// +//***************************************************************************** +#define USB_EPCISC_PF 0x00000001 // USB Power Fault Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRRIS register. +// +//***************************************************************************** +#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRIM register. +// +//***************************************************************************** +#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRISC register. +// +//***************************************************************************** +#define USB_DRISC_RESUME 0x00000001 // RESUME Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_GPCS register. +// +//***************************************************************************** +#define USB_GPCS_DEVMOD_M 0x00000007 // Device Mode +#define USB_GPCS_DEVMOD_OTG 0x00000000 // Use USB0VBUS and USB0ID pin +#define USB_GPCS_DEVMOD_HOST 0x00000002 // Force USB0VBUS and USB0ID low +#define USB_GPCS_DEVMOD_DEV 0x00000003 // Force USB0VBUS and USB0ID high +#define USB_GPCS_DEVMOD_HOSTVBUS \ + 0x00000004 // Use USB0VBUS and force USB0ID + // low +#define USB_GPCS_DEVMOD_DEVVBUS 0x00000005 // Use USB0VBUS and force USB0ID + // high + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDC register. +// +//***************************************************************************** +#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCRIS register. +// +//***************************************************************************** +#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCIM register. +// +//***************************************************************************** +#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCISC register. +// +//***************************************************************************** +#define USB_VDCISC_VD 0x00000001 // VBUS Droop Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_PP register. +// +//***************************************************************************** +#define USB_PP_ECNT_M 0x0000FF00 // Endpoint Count +#define USB_PP_USB_M 0x000000C0 // USB Capability +#define USB_PP_USB_DEVICE 0x00000040 // DEVICE +#define USB_PP_USB_HOSTDEVICE 0x00000080 // HOST +#define USB_PP_USB_OTG 0x000000C0 // OTG +#define USB_PP_ULPI 0x00000020 // ULPI Present +#define USB_PP_PHY 0x00000010 // PHY Present +#define USB_PP_TYPE_M 0x0000000F // Controller Type +#define USB_PP_TYPE_0 0x00000000 // The first-generation USB + // controller +#define USB_PP_TYPE_1 0x00000001 // The second-generation USB + // controller revision +#define USB_PP_ECNT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_PC register. +// +//***************************************************************************** +#define USB_PC_ULPIEN 0x00010000 // ULPI Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CC register. +// +//***************************************************************************** +#define USB_CC_CLKEN 0x00000200 // USB Clock Enable +#define USB_CC_CSD 0x00000100 // Clock Source/Direction +#define USB_CC_CLKDIV_M 0x0000000F // PLL Clock Divisor +#define USB_CC_CLKDIV_S 0 + +#ifdef __cplusplus + } +#endif + +#endif