diff --git a/src/portable/espressif/esp32s2/dcd_esp32s2.c b/src/portable/espressif/esp32s2/dcd_esp32s2.c
index d1e670358..de9ef6b6d 100644
--- a/src/portable/espressif/esp32s2/dcd_esp32s2.c
+++ b/src/portable/espressif/esp32s2/dcd_esp32s2.c
@@ -168,27 +168,8 @@ void dcd_init(uint8_t rhport)
 
   USB0.gahbcfg |= USB_NPTXFEMPLVL_M | USB_GLBLLNTRMSK_M; // Global interruptions ON
   USB0.gusbcfg |= USB_FORCEDEVMODE_M;                    // force devmode
-
   USB0.gotgctl &= ~(USB_BVALIDOVVAL_M | USB_BVALIDOVEN_M | USB_VBVALIDOVVAL_M); //no overrides
 
-#ifdef CONFIG_IDF_TARGET_ESP32S2BETA
-  // needed for beta chip only
-  // there was a bug in the phy logic that made the chip reset as soon as it transmitted anything.
-  // Setting the B override value made it ignore resets (any resets, generated by the faulty logic or not),
-  // which 'fixed' the problem well enough to test usb with it.
-  // Also, do note that the beta silicon run was very small and software support for it is not in mainstream esp-idf,
-  // as such you may consider phasing out support for it alltogether somewhere in the future
-
-  // TODO we could safely remove this later (maybe after 2020)
-
-  //C. chip 7.2.2 hack
-  ESP_LOGV(TAG, "DCD init - chip ESP32-S2 beta hack");
-  USB0.gotgctl = (0 << USB_BVALIDOVVAL_S); //B override value
-  ets_delay_us(20);
-  USB0.gotgctl = (0 << USB_BVALIDOVVAL_S) | (1 << USB_BVALIDOVEN_S); //B override value & enable
-  ets_delay_us(20);
-#endif
-
   // C. Setting SNAKs, then connect
   for (int n = 0; n < USB_OUT_EP_NUM; n++) {
     USB0.out_ep_reg[n].doepctl |= USB_DO_SNAK0_M; // DOEPCTL0_SNAK