diff --git a/CONTRIBUTORS.rst b/CONTRIBUTORS.rst
index 121d37789..55a291222 100644
--- a/CONTRIBUTORS.rst
+++ b/CONTRIBUTORS.rst
@@ -177,8 +177,7 @@ Notable contributors
 -  Add new DCD port for Synopsys DesignWare for STM32 L4, F2, F4,
    F7, H7 etc ...
 -  Add new DCD port for TI MSP430
--  Board support for STM32F407 Discovery, STM32H743 Nucleo, pyboard
-   v1.1, msp\_exp430f5529lp etc ...
+-  Board support for STM32F407 Discovery, STM32H743 Nucleo, pyboard v1.1, msp\_exp430f5529lp etc ...
 
 
 `Zixun Li <https://github.com/HiFiPhile>`__
diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst
index 4325ff2ca..4cb30799c 100644
--- a/docs/info/changelog.rst
+++ b/docs/info/changelog.rst
@@ -2,6 +2,37 @@
 Changelog
 *********
 
+0.12.0
+======
+
+- add CFG_TUSB_OS_INC_PATH for os include path
+
+Device Controller Driver (DCD)
+------------------------------
+
+- Getting device stack to pass USB Compliance Verification test (chapter9, HID, MSC). Ports are tested:
+  nRF, SAMD 21/51, rp2040, stm32f4, Renesas RX, iMXRT, ESP32-S2/3, Kinetic KL25/32
+- Added dcd_edpt_close_all() for switching configuration
+- [Transdimension] Support dcd_edpt_xfer_fifo() with auto wrap over if fifo buffer is 4K aligned and size is multiple of 4K.
+- [Da146xx] Improve vbus, reset, suspend, resume detection, and remote wakeup.
+
+Device Stack
+------------
+
+- Add new network driver Network Control Model (CDC-NCM), update net_lwip_webserver to work with NCM (need re-configure example)
+- Add new USB Video Class UVC 1.5 driver and video_capture example ((work in progress)
+- Fix potential buffer overflow for HID, bluetooth drivers
+
+Host Controller Driver (HCD)
+----------------------------
+
+No notable changes
+
+Host Stack
+----------
+
+No notable changes
+
 0.11.0 (2021-08-29)
 ===================
 
@@ -26,7 +57,7 @@ Synopsys
 ^^^^^^^^
 
 - Fix Synopsys set address bug which could cause re-enumeration failed
-- Fix for dcd_synopsys driver integer overflow in HS mode (issue #968)
+- Fix dcd_synopsys driver integer overflow in HS mode (issue #968)
 
 nRF5x
 ^^^^^
diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst
index 044792993..875372c81 100644
--- a/docs/reference/getting_started.rst
+++ b/docs/reference/getting_started.rst
@@ -122,7 +122,7 @@ Logger
 By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: 
 
 
-* `LOGGER=rtt`: use [Segger RTT protocol](https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/)   
+* `LOGGER=rtt`: use `Segger RTT protocol <https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/>`_
 
   * Cons: requires jlink as the debugger.
   * Pros: work with most if not all MCUs
diff --git a/src/tusb_option.h b/src/tusb_option.h
index b2ebfdf66..e49fc0119 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -28,7 +28,7 @@
 #define _TUSB_OPTION_H_
 
 #define TUSB_VERSION_MAJOR     0
-#define TUSB_VERSION_MINOR     11
+#define TUSB_VERSION_MINOR     12
 #define TUSB_VERSION_REVISION  0
 #define TUSB_VERSION_STRING    TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION)