diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index fc5b92b68..8ef19b0a0 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -51,6 +51,7 @@ jobs: - 'samd51' - 'saml2x' - 'stm32f0' + - 'stm32f1' - 'stm32f4' - 'stm32f7' - 'stm32h7' diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 0028744f6..4c7d753c2 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -307,10 +307,11 @@ ST STM32 - `STM32 F070rb Nucleo `__ - `STM32 F072 Evaluation `__ - `STM32 F072rb Discovery `__ -- STM32 F103c Blue Pill +- `STM32 F103c8 Blue Pill `__ +- `STM32 F103rc Mini v2.0 `__ - `STM32 F207zg Nucleo `__ - `STM32 F303vc Discovery `__ -- STM32 F401cc Black Pill +- `STM32 F401cc Black Pill `__ - `STM32 F407vg Discovery `__ - `STM32 F411ce Black Pill `__ - `STM32 F411ve Discovery `__ diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index b2e0453c5..853bb9d64 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -55,12 +55,13 @@ void board_init(void) // Enable UART Clock UART_CLK_EN(); +#if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); -#if CFG_TUSB_OS == OPT_OS_FREERTOS +#elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif // LED diff --git a/hw/bsp/stm32f103bluepill/STM32F103XB_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld similarity index 98% rename from hw/bsp/stm32f103bluepill/STM32F103XB_FLASH.ld rename to hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld index 4be9df61b..ca1804905 100644 --- a/hw/bsp/stm32f103bluepill/STM32F103XB_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld @@ -41,7 +41,7 @@ _Min_Stack_Size = 0x400; /* required amount of stack */ /* Specify the memory areas */ MEMORY { -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K } diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h new file mode 100644 index 000000000..57a607ed5 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -0,0 +1,92 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART1 +//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF1_USART1 +//#define UART_TX_PIN GPIO_PIN_9 +//#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f1_clock_init(void) +{ + RCC_ClkInitTypeDef clkinitstruct = {0}; + RCC_OscInitTypeDef oscinitstruct = {0}; + RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + oscinitstruct.HSEState = RCC_HSE_ON; + oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; + oscinitstruct.PLL.PLLState = RCC_PLL_ON; + oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + HAL_RCC_OscConfig(&oscinitstruct); + + /* USB clock selection */ + rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; + rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; + clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk new file mode 100644 index 000000000..9c690ca7e --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F103X8_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f103c8 + +# flash target ROM bootloader +flash: flash-dfu-util diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld new file mode 100644 index 000000000..da40d1eb2 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** +** File : STM32F103XB_FLASH.ld +** +** Abstract : Linker script for STM32F103xB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 48K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h new file mode 100644 index 000000000..bedce7f14 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -0,0 +1,92 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_8 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART1 +//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF1_USART1 +//#define UART_TX_PIN GPIO_PIN_9 +//#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f1_clock_init(void) +{ + RCC_ClkInitTypeDef clkinitstruct = {0}; + RCC_OscInitTypeDef oscinitstruct = {0}; + RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + oscinitstruct.HSEState = RCC_HSE_ON; + oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; + oscinitstruct.PLL.PLLState = RCC_PLL_ON; + oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + HAL_RCC_OscConfig(&oscinitstruct); + + /* USB clock selection */ + rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; + rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; + clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk new file mode 100644 index 000000000..eeda87080 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F103XC_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f103rc + +# flash target ROM bootloader +flash: flash-jlink diff --git a/hw/bsp/stm32f103bluepill/stm32f103bluepill.c b/hw/bsp/stm32f1/family.c similarity index 64% rename from hw/bsp/stm32f103bluepill/stm32f103bluepill.c rename to hw/bsp/stm32f1/family.c index 600f3aaef..8fcf9ebd6 100644 --- a/hw/bsp/stm32f103bluepill/stm32f103bluepill.c +++ b/hw/bsp/stm32f1/family.c @@ -24,8 +24,9 @@ * This file is part of the TinyUSB stack. */ -#include "../board.h" #include "stm32f1xx_hal.h" +#include "bsp/board.h" +#include "board.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler @@ -48,90 +49,45 @@ void USBWakeUp_IRQHandler(void) //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 0 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV1 = 1 - * PLLMUL = 9 - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef clkinitstruct = {0}; - RCC_OscInitTypeDef oscinitstruct = {0}; - RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - oscinitstruct.HSEState = RCC_HSE_ON; - oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; - oscinitstruct.PLL.PLLState = RCC_PLL_ON; - oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - HAL_RCC_OscConfig(&oscinitstruct); - - /* USB clock selection */ - rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; - rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; - clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); -} void board_init(void) { - - SystemClock_Config(); + board_stm32f1_clock_init(); - #if CFG_TUSB_OS == OPT_OS_NONE + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + +#if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); - #endif + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = LED_PIN; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Pull = LED_STATE_ON ? GPIO_PULLDOWN : GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); // Button - __HAL_RCC_GPIOA_CLK_ENABLE(); GPIO_InitStruct.Pin = BUTTON_PIN; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); // USB Pins // Configure USB DM and DP pins. - __HAL_RCC_GPIOA_CLK_ENABLE(); GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; diff --git a/hw/bsp/stm32f103bluepill/board.mk b/hw/bsp/stm32f1/family.mk similarity index 84% rename from hw/bsp/stm32f103bluepill/board.mk rename to hw/bsp/stm32f1/family.mk index 656a37323..3fb2e6e70 100644 --- a/hw/bsp/stm32f103bluepill/board.mk +++ b/hw/bsp/stm32f1/family.mk @@ -4,6 +4,8 @@ DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +include $(TOP)/$(BOARD_PATH)/board.mk + CFLAGS += \ -flto \ -mthumb \ @@ -11,15 +13,12 @@ CFLAGS += \ -mcpu=cortex-m3 \ -mfloat-abi=soft \ -nostdlib -nostartfiles \ - -DSTM32F103xB \ -DCFG_TUSB_MCU=OPT_MCU_STM32F1 # mcu driver cause following warnings #CFLAGS += -Wno-error=unused-parameter # All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32F103XB_FLASH.ld - SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ @@ -29,14 +28,11 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s - INC += \ + $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source FREERTOS_PORT = ARM_CM3 @@ -45,5 +41,5 @@ FREERTOS_PORT = ARM_CM3 JLINK_DEVICE = stm32f103c8 # flash target ROM bootloader -flash: $(BUILD)/$(PROJECT).bin +flash-dfu-util: $(BUILD)/$(PROJECT).bin dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/hw/bsp/stm32f103bluepill/stm32f1xx_hal_conf.h b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h similarity index 100% rename from hw/bsp/stm32f103bluepill/stm32f1xx_hal_conf.h rename to hw/bsp/stm32f1/stm32f1xx_hal_conf.h