From d62f97f7d56a89a27963c162d214be484644d534 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?King=20K=C3=A9vin?= Date: Tue, 2 Nov 2021 17:38:28 +0100 Subject: [PATCH] README: add changelog for v0 --- README.md | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/README.md b/README.md index 2340ba0..4c20eb4 100644 --- a/README.md +++ b/README.md @@ -60,6 +60,22 @@ design choice - to keep the board small, I decided to put the battery holder on the back of the board. This requires you to solder it last, else it would cover the hole for the USB-A receptacle. - I did not specify the colors of the LEDs, or the value of the resistors, in the schematic, since I wanted to try out alternatives while assembling them. +changelog +========= + +v0 +-- + +first prototype, used as proof of concept. +I used parts I already had in my inventory. + +parts need to be solders on both sides of the PCB. +first, solder the LEDs and resistors on the top side. +then solder both USB connectors on the top side. +the tabs of the USB connectors need to the soldered on the bottom side, and provide rigidity. +cut the leads of the USB connectors so the bottom side is flat again. +finally, place the battery holder on the bottom side, and solder the leads on the top side. + requirements ============