make: update bom generation

Makefile

@@ -5,6 +5,8 @@ SUBSHEET ?=
 KICAD = kicad-cli
 # path to qeda
 QEDA := qeda
+# path to KiBOM
+KIBOM := ./KiBOM_CLI.py
 # path to InteractiveHtmlBom
 IBOMGEN := ~/.local/share/kicad/7.0/3rdparty/plugins/org_openscopeproject_InteractiveHtmlBom/generate_interactive_bom.py
 
@@ -70,7 +72,7 @@ lib:
 
 # export Bill of Material (as CSV)
 %.bom.csv: %.bom.xml
-	kibom $< $@
+	python $(KIBOM) $< $@
 
 # generate panel
 PANEL_DIR := panel

bom.ini

@@ -1,10 +1,37 @@
 [BOM_OPTIONS]
-ignore_dnf = 0
-number_rows = 0
+; General BoM options here
+; If 'ignore_dnf' option is set to 1, rows that are not to be fitted on the PCB will not be written to the BoM file
+ignore_dnf = 1
+; If 'html_generate_dnf' option is set to 1, also generate a list of components not fitted on the PCB (HTML only)
+html_generate_dnf = 1
+; If 'use_alt' option is set to 1, grouped references will be printed in the alternate compressed style eg: R1-R7,R18
+use_alt = 0
+; If 'alt_wrap' option is set to and integer N, the references field will wrap after N entries are printed
+alt_wrap = 0
+; If 'number_rows' option is set to 1, each row in the BoM will be prepended with an incrementing row number
+number_rows = 1
+; If 'group_connectors' option is set to 1, connectors with the same footprints will be grouped together, independent of the name of the connector
 group_connectors = 1
-test_regex = 0
+; If 'test_regex' option is set to 1, each component group will be tested against a number of regular-expressions (specified, per column, below). If any matches are found, the row is ignored in the output file
+test_regex = 1
+; If 'merge_blank_fields' option is set to 1, component groups with blank fields will be merged into the most compatible group, where possible
 merge_blank_fields = 1
+; Specify output file name format, %O is the defined output name, %v is the version, %V is the variant name which will be ammended according to 'variant_file_name_format'.
 output_file_name = %O%V
+; Specify the variant file name format, this is a unique field as the variant is not always used/specified. When it is unused you will want to strip all of this.
+variant_file_name_format = _(%V)
+; Field name used to determine if a particular part is to be fitted
+fit_field = Config
+; Make a backup of the bom before generating the new one, using the following template
+make_backup = %O.tmp
+; Default number of boards to produce if none given on CLI with -n
+number_boards = 1
+; Default PCB variant if none given on CLI with -r
+board_variant = ['default']
+; Whether to hide headers from output file
+hide_headers = False
+; Whether to hide PCB info from output file
+hide_pcb_info = False
 
 [IGNORE_COLUMNS]
 ; Any column heading that appears here will be excluded from the Generated BoM
@@ -15,6 +42,9 @@ Footprint
 Footprint Lib
 Build Quantity
 sheetpath
+qeda_part
+qeda_variant
+name
 
 [COLUMN_ORDER]
 ; Columns will apear in the order they are listed here
@@ -28,15 +58,48 @@ Part Lib
 Footprint
 Footprint Lib
 Build Quantity
+DigiKey
 LCSC
+JLCPCB
+JLCPCB_CORRECTION
 Datasheet
 
 [GROUP_FIELDS]
 ; List of fields used for sorting individual components into groups
 ; Components which match (comparing *all* fields) will be grouped together
 ; Field names are case-insensitive
-Part
-Part Lib
 Value
 Footprint
 Footprint Lib
+
+[COMPONENT_ALIASES]
+; A series of values which are considered to be equivalent for the part name
+; Each line represents a list of equivalent component name values separated by white space
+; e.g. 'c c_small cap' will ensure the equivalent capacitor symbols can be grouped together
+; Aliases are case-insensitive
+c	c_small	cap	capacitor
+r	r_small	res	resistor
+sw	switch
+l	l_small	inductor
+zener	zenersmall
+d	diode	d_small
+
+[REGEX_INCLUDE]
+; A series of regular expressions used to include parts in the BoM
+; If there are any regex defined here, only components that match against ANY of them will be included in the BOM
+; Column names are case-insensitive
+; Format is: "[ColumName] [Regex]" (white-space separated)
+
+[REGEX_EXCLUDE]
+; A series of regular expressions used to exclude parts from the BoM
+; If a component matches ANY of these, it will be excluded from the BoM
+; Column names are case-insensitive
+; Format is: "[ColumName] [Regex]" (white-space separated)
+References	^TP[0-9]*
+References	^FID
+Part	mount.*hole
+Part	solder.*bridge
+Part	test.*point
+Footprint	test.*point
+Footprint	mount.*hole
+Footprint	fiducial