From 1a17402b74daca2d5cd38b440a6c0c9981b152b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?King=20K=C3=A9vin?= Date: Fri, 11 Aug 2023 09:56:51 +0200 Subject: [PATCH] doc: improve usage, and mention ES600 limitation --- README.md | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index b715036..5752a9b 100644 --- a/README.md +++ b/README.md @@ -9,18 +9,23 @@ this connector allows the RPH0002 battery to be used a standalone, independently usage ===== -plug the connector in either way since it's reversible. -toggle the switch to on, and the nearby red LED should light up. +plug the connector at the bottom of the battery either way since it's reversible. +toggle the switch to on, and the green RUN LED should light up. +the strobing blue ACT LED shows the board is communicating with the battery. you are ready to use the battery. -use the XT60 connector to easily connect wires to the battery. +the XT60 connector allows easily connecting wires to the battery. use the DC barrel jack connector (5.0 mm OD, 2.1 mm ID) to charge the battery. -the charger should be for a 13S battery pack, up to 54.6V, and 5A. -when charging, the % should blink, and the charging level displayed. +the charger should be for a 13S battery pack, up to 54.6V, and maximum 5A. +when charging, the red LED next to the connector should turn on. +on the battery display the % should blink, and the charging level displayed. when the switch is toggled to off, the battery light turns red. this clears after 10 minutes. +currently it can only operate the batteries for the ES400B. +the hardware supports the ES600, but not the firmware yet. + mode of operation =================