doc: overall improvement

This commit is contained in:
King Kévin 2022-11-14 23:40:17 +01:00
parent 3001cc643a
commit 0c4987cd21
1 changed files with 23 additions and 20 deletions

View File

@ -1,4 +1,4 @@
the PD blocker removes Power Delivery (PD) capabilities from USB-C connections
The PD blocker removes Power Delivery (PD) capabilities from USB-C connections and provides over-voltage protection.
<img src="picture/v2_front.webp" title="front" height="250"/>
<img src="picture/v2_back.webp" title="back" height="250"/>
@ -6,41 +6,44 @@ the PD blocker removes Power Delivery (PD) capabilities from USB-C connections
purpose
=======
some USB-C devices do not require the Power Delivery features available on the connector, mainly higher voltage and current.
the device might not even be rated for higher voltages.
mischievous eMarked cables (with PD-capable chips built in) or chargers might raise the voltage without the device requesting it.
the higher voltage could then damage the device.
Some USB-C devices do not require the Power Delivery features available on USB-C, mainly higher voltage and current.
The device could not even be rated for higher voltages.
But chargers might be stuck at higher voltage, or mischievous eMarked cables (with PD-capable chips built in) could raise the voltage, permanently damaging it.
the PD blocker protects your [expensive] USB-C device from such damages.
The PD blocker protects your [expensive] USB-C device from such damages.
usage
=====
insert the PD blocker in line, between the power source (e.g. charger or host computer), cable, and your device.
it can be inserted between any two of these components, and will work the same.
plug and receptacle can be either side, and it is reversible along the axis of the connectors (like normal USB-C connectors).
Insert the PD blocker in line, between the power source (e.g. charger or host computer), cable, and your device.
It can be inserted between any two of these components, and will work the same.
Plug and receptacle can be either side, and it is reversible along the axis of the connectors (like normal USB-C connectors).
PD communication is completely block.
when over-voltage is detected (Vbus > 5.5V), power is cut and an OVP LED indicating the culprit side lights up.
The PD blocker will prevent any Power Delivery communication, such as raising the voltage.
And when over-voltage is detected (Vbus > 5.5V), power is cut and an OVP LED indicating the culprit side lights up.
Connect the PD blocker before the target device for the protection to take effect before it can reach it.
all other features of USB-C are preserved (e.g. USB2, USB3, USB4, SBU, orientation detection)
some alternate modes requiring PD communication will not work anymore though.
All other features of USB-C are preserved (e.g. USB2, USB3, USB4, SBU, orientation detection)
Some alternate modes requiring PD communication will not work anymore though.
mode of operation
=================
to prevent PD communication, capacitors are placed on the CC lines.
they smooth out the 300 Kbps BMC signal used for PD communication.
it still allows the identification of Rp, Rd, and Ra used for orientation and role detection.
To prevent PD communication, capacitors are placed on the CC lines.
They smooth out the 300 Kbps BMC signal used for PD communication.
It still allows the identification of Rp, Rd, and Ra used for orientation and role detection.
additionally there is an over-voltage protection circuit.
Additionally there is an over-voltage protection circuit.
VBUS (on either side) is compared to a reference voltage.
when VBUS is below 5.5V, p-channel MOSFETs are switched on, and allow VBUS going from one side to the other.
when VBUS is above 5.5V, the p-channel MOSFETs are switched off, and prevent VBUS interconnection, cutting the power.
When VBUS is below 5.5V, p-channel MOSFETs are switched on, and allow VBUS going from one side to the other.
When VBUS is above 5.5V, the p-channel MOSFETs are switched off, and prevent VBUS interconnection, cutting the power.
warning
=======
the PD blocker can block up to 36V.
The PD blocker can block up to 36V.
PD rev 2.0 specifies voltages up to 20V.
PD rev 3.0 specifies voltages up to 48V, but I haven't seen any power source using this new capability yet.
The PD blocker can take a seconds (at 5.6V) until the over-voltage protection take effect.
Connect the PD blocker before the target device for the protection to take effect before it can reach it.