board/CHANGELOG.md

v1
==

fixes v0 short comings:

- shield LED is on when both shell are interconnected and connected to ground (the cable could cheat by just connecting both shells directly to ground)
- all GND and VBUS pins of USB-C are used

v0
==

first prototype build.

it works, but almost only on specification compliant cables:

- some cables don't have all 4 GND and VBUS pins in the C plug
- normally the shield should connect both shells AND be tied to ground on BOTH ends, but I've seen ALL possible combinations thereof
doc: document v1 changes 2022-08-03 18:24:35 +02:00			`v1`
			`==`

			`fixes v0 short comings:`

			`- shield LED is on when both shell are interconnected and connected to ground (the cable could cheat by just connecting both shells directly to ground)`
			`- all GND and VBUS pins of USB-C are used`

doc: document v0 results 2022-06-17 19:13:55 +02:00			`v0`
			`==`

			`first prototype build.`

			`it works, but almost only on specification compliant cables:`

			`- some cables don't have all 4 GND and VBUS pins in the C plug`
			`- normally the shield should connect both shells AND be tied to ground on BOTH ends, but I've seen ALL possible combinations thereof`